Effects of Surface Irregularities and Coatings on Thermal Emittance of Selected Metals Between 373 and 1073 K

2021 ◽  
Vol 143 (4) ◽  
Author(s):  
Giovanni Tanda ◽  
Mario Misale
Keyword(s):  
Thin Films ◽  
Surface Roughness ◽  
Radiation Heat Transfer ◽  
Surface Characteristics ◽  
Surface Damage ◽  
Radiative Properties ◽  
Large Temperature ◽  
Oxide Layers ◽  
Thermal Emittance ◽  
Roughness Surface

Abstract In many areas of engineering, radiation heat transfer plays an important role and it is of great importance the knowledge of the thermal radiative properties of the surfaces involved. Radiation properties of solid materials are highly dependent on surface characteristics, e.g., surface roughness, surface damage, oxide layers, and deposited thin films, and cannot be assumed as those of pure materials, typically referred to optically smooth surfaces (OS). An experimental investigation of the thermal emittance of some metals (nickel, titanium, silver, and stainless steel) is presented. Experiments were conducted by using a radiometric apparatus able to measure the total normal emittance under different temperature and pressure conditions. The aim of this paper was to identify the separate roles of surface microgeometry alterations (surface roughness), surface damage, and surface coatings (i.e., presence of either thin films deposited onto a smooth surface or oxide layers formed on both smooth and rough surfaces) by undertaking carefully selected sets of experiments covering a relatively large temperature range.

scholarly journals Femtosecond Laser Fabrication of Engineered Functional Surfaces based on Biodegradable Polymer and Biopolymer/Ceramic Composite Thin Films

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 378 ◽  
Author(s):  
Albena Daskalova ◽  
Irina Bliznakova ◽  
Liliya Angelova ◽  
Anton Trifonov ◽  
Heidi Declercq ◽  
...  
Keyword(s):  
Thin Films ◽  
Surface Roughness ◽  
Femtosecond Laser ◽  
Surface Functionalization ◽  
Biodegradable Polymer ◽  
Photoelectron Spectroscopy ◽  
Laser Energy ◽  
Surface Characteristics ◽  
Laser Pulses ◽  
Xrd Analysis

Surface functionalization introduced by precisely-defined surface structures depended on the surface texture and quality. Laser treatment is an advanced, non-contact technique for improving the biomaterials surface characteristics. In this study, femtosecond laser modification was applied to fabricate diverse structures on biodegradable polymer thin films and their ceramic blends. The influences of key laser processing parameters like laser energy and a number of applied laser pulses (N) over laser-treated surfaces were investigated. The modification of surface roughness was determined by atomic force microscopy (AFM). The surface roughness (Rrms) increased from approximately 0.5 to nearly 3 µm. The roughness changed with increasing laser energy and a number of applied laser pulses (N). The induced morphologies with different laser parameters were compared via Scanning electron microscopy (SEM) and confocal microscopy analysis. The chemical composition of exposed surfaces was examined by FTIR, X-ray photoelectron spectroscopy (XPS), and XRD analysis. This work illustrates the capacity of the laser microstructuring method for surface functionalization with possible applications in improvement of cellular attachment and orientation. Cells exhibited an extended shape along laser-modified surface zones compared to non-structured areas and demonstrated parallel alignment to the created structures. We examined laser-material interaction, microstructural outgrowth, and surface-treatment effect. By comparing the experimental results, it can be summarized that considerable processing quality can be obtained with femtosecond laser structuring.

Effect of Burnishing Process on Surface Characteristics of Particulate Reinforced Iron-Base Composites

2010 ◽  
Vol 97-101 ◽  
pp. 2062-2066
Author(s):  
Li Fa Han ◽  
Sheng Guan Qu
Keyword(s):  
Surface Roughness ◽  
Process Parameters ◽  
Surface Characteristics ◽  
Micro Hardness ◽  
Ball Burnishing ◽  
Ceramic Ball ◽  
Iron Base ◽  
Roughness Surface ◽  
Burnishing Process ◽  
Particulate Reinforced

This paper presents an investigation on the surface characteristics of NbC particulate reinforced iron-base composites after burnished by a ceramic ball burnishing apparatus. The effect of relative parameters on surface roughness, surface micro-hardness and depth of hardening layer of composites is studied. The results show that after burnishing process the surface roughness of composites samples sharply decreases, and the surface micro-hardness increases relatively, and the depth of hardening layer accesses 0.120.16mm. Also, material’s burnishing mechanism is discussed, and the process parameters are optimized.

Reduced Surface Roughness of P3HT: PCBM Thin Films with Different Ratios by Electrospray Deposition Methods

2013 ◽  
Vol E96.C (3) ◽  
pp. 362-364
Author(s):  
Takeshi FUKUDA ◽  
Kenji TAKAGI ◽  
Norihiko KAMATA ◽  
Jungmyoung JU ◽  
Yutaka YAMAGATA
Keyword(s):  
Thin Films ◽  
Surface Roughness ◽  
Electrospray Deposition ◽  
Reduced Surface

scholarly journals Biofilm inhibition and bactericidal activity of NiTi alloy coated with graphene oxide/silver nanoparticles via electrophoretic deposition

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sirapat Pipattanachat ◽  
Jiaqian Qin ◽  
Dinesh Rokaya ◽  
Panida Thanyasrisung ◽  
Viritpon Srimaneepong
Keyword(s):  
Surface Roughness ◽  
Silver Nanoparticles ◽  
Graphene Oxide ◽  
Electrophoretic Deposition ◽  
Biofilm Formation ◽  
Niti Alloy ◽  
Surface Characteristics ◽  
Dependent Manner ◽  
Biofilm Inhibition ◽  
Coating Time

AbstractBiofilm formation on medical devices can induce complications. Graphene oxide/silver nanoparticles (GO/AgNPs) coated nickel-titanium (NiTi) alloy has been successfully produced. Therefore, the aim of this study was to determine the anti-bacterial and anti-biofilm effects of a GO/AgNPs coated NiTi alloy prepared by Electrophoretic deposition (EPD). GO/AgNPs were coated on NiTi alloy using various coating times. The surface characteristics of the coated NiTi alloy substrates were investigated and its anti-biofilm and anti-bacterial effect on Streptococcus mutans biofilm were determined by measuring the biofilm mass and the number of viable cells using a crystal violet assay and colony counting assay, respectively. The results showed that although the surface roughness increased in a coating time-dependent manner, there was no positive correlation between the surface roughness and the total biofilm mass. However, increased GO/AgNPs deposition produced by the increased coating time significantly reduced the number of viable bacteria in the biofilm (p < 0.05). Therefore, the GO/AgNPs on NiTi alloy have an antibacterial effect on the S. mutans biofilm. However, the increased surface roughness does not influence total biofilm mass formation (p = 0.993). Modifying the NiTi alloy surface using GO/AgNPs can be a promising coating to reduce the consequences of biofilm formation.

Modeling of surface roughness in a novel magnetorheological gear profile finishing process

2020 ◽  
pp. 095440622097826
Author(s):  
Ravi Datt Yadav ◽  
Anant Kumar Singh ◽  
Kunal Arora
Keyword(s):  
Surface Roughness ◽  
Gear Tooth ◽  
Surface Characteristics ◽  
Spur Gear ◽  
Tooth Profile ◽  
Tooth Surface ◽  
Magnetic Flux Density ◽  
Element Analysis ◽  
Finishing Process ◽  
Gear Profile

Fine finishing of spur gears reduces the vibrations and noise and upsurges the service life of two mating gears. A new magnetorheological gear profile finishing (MRGPF) process is utilized for the fine finishing of spur gear teeth profile surfaces. In the present study, the development of a theoretical mathematical model for the prediction of change in surface roughness during the MRGPF process is done. The present MRGPF is a controllable process with the magnitude of the magnetic field, therefore, the effect of magnetic flux density (MFD) on the gear tooth profile has been analyzed using an analytical approach. Theoretically calculated MFD is validated experimentally and with the finite element analysis. To understand the finishing process mechanism, the different forces acting on the gear surface has been investigated. For the validation of the present roughness model, three sets of finishing cycle experimentations have been performed on the spur gear profile by the MRGPF process. The surface roughness of the spur gear tooth surface after experimentation was measured using Mitutoyo SJ-400 surftest and is equated with the values of theoretically calculated surface roughness. The results show the close agreement which ranges from −7.69% to 2.85% for the same number of finishing cycles. To study the surface characteristics of the finished spur gear tooth profile surface, scanning electron microscopy is used. The present developed theoretical model for surface roughness during the MRGPF process predicts the finishing performance with cycle time, improvement in the surface quality, and functional application of the gears.

scholarly journals Modeling the Layer-by-Layer Growth of HKUST-1 Metal-Organic Framework Thin Films

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1631
Author(s):  
Qiang Zhang ◽  
Yohanes Pramudya ◽  
Wolfgang Wenzel ◽  
Christof Wöll
Keyword(s):  
Thin Films ◽  
Surface Roughness ◽  
Deposition Rate ◽  
Layer Growth ◽  
Coarse Grained ◽  
Structural Defects ◽  
Effect Of Temperature ◽  
Layer By Layer ◽  
Reactant Concentration ◽  
Metal Organic

Metal organic frameworks have emerged as an important new class of materials with many applications, such as sensing, gas separation, drug delivery. In many cases, their performance is limited by structural defects, including vacancies and domain boundaries. In the case of MOF thin films, surface roughness can also have a pronounced influence on MOF-based device properties. Presently, there is little systematic knowledge about optimal growth conditions with regard to optimal morphologies for specific applications. In this work, we simulate the layer-by-layer (LbL) growth of the HKUST-1 MOF as a function of temperature and reactant concentration using a coarse-grained model that permits detailed insights into the growth mechanism. This model helps to understand the morphological features of HKUST-1 grown under different conditions and can be used to predict and optimize the temperature for the purpose of controlling the crystal quality and yield. It was found that reactant concentration affects the mass deposition rate, while its effect on the crystallinity of the generated HKUST-1 film is less pronounced. In addition, the effect of temperature on the surface roughness of the film can be divided into three regimes. Temperatures in the range from 10 to 129 °C allow better control of surface roughness and film thickness, while film growth in the range of 129 to 182 °C is characterized by a lower mass deposition rate per cycle and rougher surfaces. Finally, for T larger than 182 °C, the film grows slower, but in a smooth fashion. Furthermore, the potential effect of temperature on the crystallinity of LbL-grown HKUST-1 was quantified. To obtain high crystallinity, the operating temperature should preferably not exceed 57 °C, with an optimum around 28 °C, which agrees with experimental observations.

scholarly journals Colloidal CuInSe 2 nanocrystals thin films of low surface roughness

2013 ◽  
Vol 4 (1) ◽  
pp. 015004 ◽  
Author(s):  
Antoine de Kergommeaux ◽  
Angela Fiore ◽  
Jérôme Faure-Vincent ◽  
Adam Pron ◽  
Peter Reiss
Keyword(s):  
Thin Films ◽  
Surface Roughness

Effects of surface damage on critical current density in MgB2 thin films

2021 ◽  
Vol 22 ◽  
pp. 14-19
Author(s):  
Soon-Gil Jung ◽  
Duong Pham ◽  
Jung Min Lee ◽  
Yoonseok Han ◽  
Won Nam Kang ◽  
...  
Keyword(s):  
Thin Films ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Surface Damage ◽  
Mgb2 Thin Films

scholarly journals Post-Processing and Surface Characterization of Additively Manufactured Stainless Steel 316L Lattice: Implications for BioMedical Use

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1376
Author(s):  
Alex Quok An Teo ◽  
Lina Yan ◽  
Akshay Chaudhari ◽  
Gavin Kane O’Neill
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Surface Characterization ◽  
High Surface ◽  
Surface Characteristics ◽  
Post Processing ◽  
Stainless Steel 316L ◽  
Processing Methods ◽  
Particulate Debris

Additive manufacturing of stainless steel is becoming increasingly accessible, allowing for the customisation of structure and surface characteristics; there is little guidance for the post-processing of these metals. We carried out this study to ascertain the effects of various combinations of post-processing methods on the surface of an additively manufactured stainless steel 316L lattice. We also characterized the nature of residual surface particles found after these processes via energy-dispersive X-ray spectroscopy. Finally, we measured the surface roughness of the post-processing lattices via digital microscopy. The native lattices had a predictably high surface roughness from partially molten particles. Sandblasting effectively removed this but damaged the surface, introducing a peel-off layer, as well as leaving surface residue from the glass beads used. The addition of either abrasive polishing or electropolishing removed the peel-off layer but introduced other surface deficiencies making it more susceptible to corrosion. Finally, when electropolishing was performed after the above processes, there was a significant reduction in residual surface particles. The constitution of the particulate debris as well as the lattice surface roughness following each post-processing method varied, with potential implications for clinical use. The work provides a good base for future development of post-processing methods for additively manufactured stainless steel.

Sign in / Sign up

Export Citation Format

Share Document