Evaluation of Ring-Type Energy Harvesters

2011 ◽  
Author(s):  
S. D. Hu ◽  
H. Li ◽  
H. S. Tzou
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Layer ◽  
Piezoelectric Materials ◽  
Electrical Energy ◽  
Basic Structure ◽  
Open Circuit ◽  
Ambient Vibration ◽  
Practical Applications ◽  
Energy Harvesters ◽  
Segment Size

Piezoelectric materials can be used as electromechanical conversion mechanisms to transfer ambient vibration into electrical energy to power electronic devices. In this study, an elastic ring laminated with a piezoelectric layer on the inner surface is utilized as the basic structure for energy harvesting. The piezoelectric layer is uniformly segmented into several energy harvesting patches for practical applications. The generated electrical energy resulting from modal voltages is analyzed under the open-circuit condition. Two modal energy generations are evaluated: one is the energy induced by the membrane oscillation and the other is the energy induced by the bending oscillation. For practical design applications, energy generations are evaluated with respect to ring radius, piezoelectric layer thickness, ring thickness and segment size. The maximal energy of all harvester patches on the ring is calculated to determine the optimal patch locations with respect to various ring modes. By summing up energies generated from all harvesters on the ring, the overall energy is also evaluated Based on the normalizations and assumptions of parameters, results indicate that the larger the segment size is, the less the energy can be generated.

Energy Harvesting Characteristics of Conical Shells

2011 ◽  
Author(s):  
H. Li ◽  
S. D. Hu ◽  
H. S. Tzou
Keyword(s):  
Energy Harvesting ◽  
Conical Shell ◽  
Energy Harvester ◽  
Electric Energy ◽  
Electrical Energy ◽  
Open Circuit ◽  
Ambient Vibration ◽  
Circular Membrane ◽  
Shell Surface ◽  
Piezoelectric Energy

Piezoelectric energy harvesting has experienced significant growth over the past few years. Various harvesting structures have been proposed to convert ambient vibration energies to electrical energy. However, these harvester’s base structures are mostly beams and some plates. Shells have great potential to harvest more energy. This study aims to evaluate a piezoelectric coupled conical shell based energy harvester system. Piezoelectric patches are laminated on the conical shell surface to convert vibration energy to electric energy. An open-circuit output voltage of the conical energy harvester is derived based on the thin-shell theory and the Donnel-Mushtari-Valsov theory. The open-circuit voltage and its derived energy consists of four components respectively resulting from the meridional and circular membrane strains, as well as the meridional and circular bending strains. Reducing the surface of the harvester to infinite small gives the spatial energy distribution on the shell surface. Then, the distributed modal energy harvesting characteristics of the proposed PVDF/conical shell harvester are evaluated in case studies. The results show that, for each mode with unit modal amplitude, the distribution depends on the mode shape, harvester location, and geometric parameters. The regions with high strain outputs yield higher modal energies. Accordingly, optimal locations for the PVDF harvester can be defined. Also, when modal amplitudes are specified, the overall energy of the conical shell harvester can be calculated.

scholarly journals A Review on Mechanisms for Piezoelectric-Based Energy Harvesters

Energies ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1850 ◽  
Author(s):  
Hassan Elahi ◽  
Marco Eugeni ◽  
Paolo Gaudenzi
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Materials ◽  
Electrical Energy ◽  
Vital Role ◽  
Piezoelectric Transducers ◽  
Qualitative And Quantitative Analysis ◽  
Electric Voltage ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Self Powered

From last few decades, piezoelectric materials have played a vital role as a mechanism of energy harvesting, as they have the tendency to absorb energy from the environment and transform it to electrical energy that can be used to drive electronic devices directly or indirectly. The power of electronic circuits has been cut down to nano or micro watts, which leads towards the development of self-designed piezoelectric transducers that can overcome power generation problems and can be self-powered. Moreover, piezoelectric energy harvesters (PEHs) can reduce the need for batteries, resulting in optimization of the weight of structures. These mechanisms are of great interest for many researchers, as piezoelectric transducers are capable of generating electric voltage in response to thermal, electrical, mechanical and electromagnetic input. In this review paper, Fluid Structure Interaction-based, human-based, and vibration-based energy harvesting mechanisms were studied. Moreover, qualitative and quantitative analysis of existing PEH mechanisms has been carried out.

Modeling of Piezoelectric Acoustic Energy Harvester

2014 ◽  
Vol 695 ◽  
pp. 757-760 ◽  
Author(s):  
Susilo Sidik ◽  
Azma Putra ◽  
Swee Leong Kok
Keyword(s):  
Energy Harvesting ◽  
Acoustic Waves ◽  
Piezoelectric Materials ◽  
Maximum Output Power ◽  
Flexural Vibration ◽  
Electrical Energy ◽  
Load Resistance ◽  
Acoustic Energy ◽  
Maximum Output ◽  
Energy Harvesters

Harvesting ambient acoustics for conversion into usable electricity provides a potential power source for emerging technologies including wireless sensor networks. Acoustic energy harvesters convert energy from acoustic waves to electrical energy. Here acoustic energy harvesting from ambient noise utilizing flexural vibration of a flexible panel is investigated. A flexural vibration from the panel is use to extract more energy from the ambient acoustics where piezoelectric materials of PVDF films are attached around the plate edges. This study found that the energy harvesting can be obtained with a maximum output power of 480 pW at 400 kΩ load resistance.

Energy Harvesting Using Piezoceramics

2010 ◽  
Author(s):  
Vainatey Kulkarni ◽  
Ridha Ben Mrad ◽  
Tamer El-Diraby ◽  
Eswar Prasad
Keyword(s):  
Energy Harvesting ◽  
Environmental Control ◽  
Electric Energy ◽  
Sensor Arrays ◽  
Electrical Energy ◽  
Ambient Vibration ◽  
Energy Harvesters ◽  
Aerospace Applications ◽  
Recent Developments ◽  
Materials Used

Energy harvesting devices are growing in popularity for their ability to capture the ambient energy surrounding a system and convert it into usable electrical energy. With an increasing demand for portable electronics and an increased interest in the implementation of arrays of wireless sensors in a number of sectors such as health monitoring in civil infrastructure, MEMS sensor arrays for automotive and aerospace applications, and environmental control, there is a surge in research in the area of power harvesting. One such method of implementing a harvesting system is to use ambient vibration in conjunction with a piezoelectric device to generate electric energy based on the direct piezoelectric effect. This paper presents an overview of recent developments in piezoelectric based energy harvesters for microsystems and nanosystems applications along the various materials used for energy harvesting. The paper also tests two common energy harvester designs to observe their difference in operation.

Multimodal pizza-shaped piezoelectric vibration-based energy harvesters

2021 ◽  
pp. 1045389X2110069
Author(s):  
Virgilio J Caetano ◽  
Marcelo A Savi
Keyword(s):  
Energy Harvesting ◽  
Frequency Spectrum ◽  
Optimization Procedure ◽  
Single Mode ◽  
Ambient Vibration ◽  
Vibration Source ◽  
Element Analysis ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Harvesting Systems

Energy harvesting from ambient vibration through piezoelectric devices has received a lot of attention in recent years from both academia and industry. One of the main challenges is to develop devices capable of adapting to diverse sources of environmental excitation, being able to efficiently operate over a broadband frequency spectrum. This work proposes a novel multimodal design of a piezoelectric energy harvesting system to harness energy from a wideband ambient vibration source. Circular-shaped and pizza-shaped designs are employed as candidates for the device, comparing their performance with classical beam-shaped devices. Finite element analysis is employed to model system dynamics using ANSYS Workbench. An optimization procedure is applied to the system aiming to seek a configuration that can extract energy from a broader frequency spectrum and maximize its output power. A comparative analysis with conventional energy harvesting systems is performed. Numerical simulations are carried out to investigate the harvester performances under harmonic and random excitations. Results show that the proposed multimodal harvester has potential to harness energy from broadband ambient vibration sources presenting performance advantages in comparison to conventional single-mode energy harvesters.

Study of the Manufacture about Piezoelectric Nanogenerator under Micro Vibration and its Performance

2011 ◽  
Vol 105-107 ◽  
pp. 2109-2112
Author(s):  
Jian Guo Sheng ◽  
Ping Zeng ◽  
Can Can Zhang
Keyword(s):  
Piezoelectric Materials ◽  
Science And Technology ◽  
Electrical Energy ◽  
Ambient Vibration ◽  
Magnetic Line ◽  
Vibration Condition ◽  
Working Principle ◽  
Commercial Value ◽  
Micro Vibration ◽  
Piezoelectric Nanogenerators

With the development of science and technology, the smaller sizes generator, the more attention by people. The main purpose of this article is to manufacture piezoelectric nanogenerator under micro vibration and its working principle is introduced and its performance is studied. The results show that, using the present nanomaterials, piezoelectric materials can be prepared. When its wind in copper laps, under the situation of micro pulse vibration its can turn into electrical energy, thus yield piezoelectric nanogenerators. In ambient vibration condition, piezoelectric materials produce larger rated current and voltage. However, copper laps cutting magnetic line of force produce less rated current and voltage. So the piezoelectric nanogenerators can be separately used to supply power. If multiple piezoelectric nanogenerator in tandem may produce higher voltage, current and power, which possess commercial value.

Wide Bandwidth Piezoelectric MEMS Energy Harvesting

2013 ◽  
Vol 1556 ◽  
Author(s):  
Ruize Xu ◽  
Sang-Gook Kim
Keyword(s):  
Structural Design ◽  
Microelectromechanical Systems ◽  
Piezoelectric Materials ◽  
Ambient Vibration ◽  
Wide Bandwidth ◽  
Frequency Spectra ◽  
Energy Harvesters ◽  
Reasonable Cost ◽  
Continuous Power ◽  
Near Future

ABSTRACTPiezoelectric Microelectromechanical Systems (MEMS) has been proven to be an attractive technology for harvesting small energy from the ambient vibration. Recent advancements in piezoelectric materials and harvester structural design, individually or in combination, have improved MEMS energy harvesters to achieve high enough power density, compactness and ultra wide bandwidth, bringing us closer towards battery-less autonomous sensors systems and networks in near future. Among the breakthroughs, non-linear resonating beam for wide bandwidth resonance is the key development to enable robust operation of MEMS energy harvesters over the unpredictable and uncontrollable frequency spectra of ambient vibration. We expect that a coin size harvester will be able to harvest about 100μW continuous power at below 100 Hz and less than 0.5 g input vibration and at reasonable cost.

Analytical Electromechanical Model of Cantilevered Bi-Stable Composites for Broadband Energy Harvesting

2013 ◽  
Author(s):  
Andres F. Arrieta ◽  
Tommaso Delpero ◽  
Paolo Ermanni
Keyword(s):  
Energy Harvesting ◽  
Large Amplitude ◽  
Wide Band ◽  
Electrical Energy ◽  
Ambient Vibration ◽  
Mode Shapes ◽  
Rapid Reduction ◽  
Electromechanical Model ◽  
Response Characteristics ◽  
Good Agreement

Vibration based energy harvesting has received extensive attention in the engineering community for the past decade thanks to its potential for autonomous powering small electronic devices. For this purpose, linear electromechanical devices converting mechanical to useful electrical energy have been extensively investigated. Such systems operate optimally when excited close to or at resonance, however, for these lightly damped structures small variations in the ambient vibration frequency results in a rapid reduction of performance. The idea to use nonlinearity to obtain large amplitude response in a wider frequency range, has shown the potential for achieving so called broadband energy harvesting. An interesting type of nonlinear structures exhibiting the desired broadband response characteristics are bi-stable composites. The bi-stable nature of these composites allows for designing several ranges of wide band large amplitude oscillations, from which high power can be harvested. In this paper, an analytical electromechanical model of cantilevered piezoelectric bi-stable composites for broadband harvesting is presented. The model allows to calculate the modal characteristics, such as natural frequencies and mode shapes, providing a tool for the design of bi-stable composites as harvesting devices. The generalised coupling coefficient is used to select the positioning of piezoelectric elements on the composites for maximising the conversion energy. The modal response of a test specimen is obtained and compared to theoretical results showing good agreement, thus validating the model.

Topology Optimization of Piezoelectric Energy Harvesting Devices Subjected to Stochastic Excitation

2010 ◽  
Author(s):  
Zheqi Lin ◽  
Hae Chang Gea ◽  
Shutian Liu
Keyword(s):  
Topology Optimization ◽  
Energy Harvesting ◽  
Electrical Energy ◽  
Ambient Vibration ◽  
Piezoelectric Energy Harvesting ◽  
The Past ◽  
Piezoelectric Energy ◽  
Random Responses ◽  
Pseudo Excitation ◽  
Energy Harvesting Devices

Converting ambient vibration energy into electrical energy using piezoelectric energy harvester has attracted much interest in the past decades. In this paper, topology optimization is applied to design the optimal layout of the piezoelectric energy harvesting devices. The objective function is defined as to maximize the energy harvesting performance over a range of ambient vibration frequencies. Pseudo excitation method (PEM) is applied to analyze structural stationary random responses. Sensitivity analysis is derived by the adjoint method. Numerical examples are presented to demonstrate the validity of the proposed approach.

Resonant Frequency Tuning Strategies for Vibration-Based Energy Harvesters

2017 ◽  
Author(s):  
Lin Dong ◽  
Frank T. Fisher
Keyword(s):  
Energy Harvesting ◽  
Resonant Frequency ◽  
Energy Harvester ◽  
Frequency Tuning ◽  
Electrical Energy ◽  
Mechanical Stretch ◽  
Applied Bias Voltage ◽  
Energy Harvesters ◽  
Frequency Matching ◽  
Low Levels

Vibration-based energy harvesting has been widely investigated to as a means to generate low levels of electrical energy for applications such as wireless sensor networks. However, due to the fact that vibration from the environment is typically random and varies with different magnitudes and frequencies, it is a challenge to implement frequency matching in order to maximize the power output of the energy harvester with a wider frequency bandwidth for applications where there is a time-dependent, varying source frequency. Possible solutions of frequency matching include widening the bandwidth of the energy harvesters themselves in order to implement frequency matching and to perform resonance-based tuning approach, the latter of which shows the most promise to implement a frequency matching design. Here three tuning strategies are discussed. First a two-dimensional resonant frequency tuning technique for the cantilever-geometry energy harvesting device which extended previous 1D tuning approaches was developed. This 2D approach could be used in applications where space constraints impact the available design space of the energy harvester. In addition, two novel resonant frequency tuning approaches (tuning via mechanical stretch and tuning via applied bias voltage, respectively) for electroactive polymer (EAP) membrane-based geometry energy harvesters was proposed, such that the resulting changes in membrane tension were used to tune the device for applications targeting variable ambient frequency environments.

Sign in / Sign up

Export Citation Format

Share Document