Comparison of Life Cycle Assessment of Two Toasters

2011 ◽  
Author(s):  
Raghunathan Srinivasan ◽  
Gaurav Ameta
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Use ◽  
Recovery Phase ◽  
Raw Material ◽  
Energy Impact ◽  
Household Products ◽  
Use Phase ◽  
One Year

The objective of this paper is to determine and compare the environmental impacts of two toasters: standard and eco-friendly. The most rapidly growing sector for the e-waste world comes from Electronic household products. More than 2 million tons of electronic products are disposed off as solid waste to landfills in the US alone. The demand for energy supplies has been rapidly increasing in the past decade. Strict legislative measures should be enforced to protect the environment by making industries collect back the manufactured products at the End-of-Life (EOL) from the users and recycle the products. If these necessary steps are not taken, then these e-wastes will impose serious threat to society and the environment. In order to re-design environmentally friendly products and facilitate sustainable take-back planning, current products need to be evaluated for their environmental impacts. One of the widely used methodologies to assess the environmental impacts of a product is called Life Cycle Assessment (LCA). LCA is a cradle to grave approach for assessing the environmental impacts of a product. The cradle to grave approach includes raw material phase, manufacturing and assembly phase, use phase, recovery phase and disposal phase. The system boundary for LCA presented in this paper includes material phase, manufacturing phase, use-phase and disposal phase. The functional unit for the LCA is entire life of the toaster which is one year based on manufacturer’s warranty which also includes the rate of usage. The environmental impacts from the two toasters as presented in this paper include eutrophication, acidification, energy-use and global warming. The use phase energy impact is experimentally determined.

scholarly journals Life Cycle Assessment on Different Synthetic Routes of ZIF-8 Nanomaterials

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4998
Author(s):  
Vasileios Ntouros ◽  
Ioannis Kousis ◽  
Dimitra Papadaki ◽  
Anna Laura Pisello ◽  
Margarita Niki Assimakopoulos
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Environmental Sustainability ◽  
Energy Use ◽  
Renewable Energy Sources ◽  
Electricity Consumption ◽  
Research Activity ◽  
Synthetic Routes ◽  
The Impact

In the last twenty years, research activity around the environmental applications of metal–organic frameworks has bloomed due to their CO2 capture ability, tunable properties, porosity, and well-defined crystalline structure. Thus, hundreds of MOFs have been developed. However, the impact of their production on the environment has not been investigated as thoroughly as their potential applications. In this work, the environmental performance of various synthetic routes of MOF nanoparticles, in particular ZIF-8, is assessed through a life cycle assessment. For this purpose, five representative synthesis routes were considered, and synthesis data were obtained based on available literature. The synthesis included different solvents (de-ionized water, methanol, dimethylformamide) as well as different synthetic steps (i.e., hours of drying, stirring, precursor). The findings revealed that the main environmental weak points identified during production were: (a) the use of dimethylformamide (DMF) and methanol (MeOH) as substances impacting environmental sustainability, which accounted for more than 85% of the overall environmental impacts in those synthetic routes where they were utilized as solvents and as cleaning agents at the same time; (b) the electricity consumption, especially due to the Greek energy mix which is fossil-fuel dependent, and accounted for up to 13% of the overall environmental impacts in some synthetic routes. Nonetheless, for the optimization of the impacts provided by the energy use, suggestions are made based on the use of alternative, cleaner renewable energy sources, which (for the case of wind energy) will decrease the impacts by up to 2%.

scholarly journals Evaluation of Life-Cycle Assessment Analysis: Application to Restoration Projects and New Construction in Alpine Climate, Japan

2021 ◽  
Vol 13 (7) ◽  
pp. 3608
Author(s):  
Yohei Endo ◽  
Hideki Takamura
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Use ◽  
Heritage Buildings ◽  
Operational Energy ◽  
Protection Legislation ◽  
New Construction ◽  
Analysis Application ◽  
Materials Used

The present paper discusses the applications of life-cycle assessment (LCA) to construction works in Japan. LCA has been frequently used to assess the environmental impacts of new construction. Nonetheless, the applications of LCA to restoration have not been fully confirmed to date. It is said that historical buildings may contribute to sustainable development. Nonetheless, as for heritage buildings, since the protection of cultural value is usually prioritised, their environmental impacts may not be sufficiently explored. To this aim, this paper evaluated the environmental impacts of the restoration of heritage buildings. This paper consisted of two tasks. First, the restoration projects of heritage buildings in Japan were introduced. The restoration of two heritage houses was discussed, referring to heritage protection legislation in Japan. Second, LCA was performed on the restoration of heritage houses and the construction of contemporary houses. Environmental impacts were compared between the restoration and new construction with regard to greenhouse gas emissions and operational energy use. A focus was given to the amount of materials used. Restoration consumes a limited amount of materials compared to new construction, although the energy use of heritage buildings is considerable. The environmental impacts of restoration were quantified so that they were compared with those of new construction. The comparison indicated issues applying LCA to heritage buildings.

scholarly journals An Environmental Evaluation of the Cut-Flower Supply Chain (Dendranthema grandiflora) Through a Life Cycle Assessment

Revista EIA ◽  
2019 ◽  
Vol 16 (31) ◽  
pp. 27-42 ◽  
Author(s):  
Carmen Alicia Parrado Moreno ◽  
Ricardo Esteba Ricardo Hernández ◽  
Héctor Iván Velásquez Arredondo ◽  
Sergio Hernando Lopera Castro ◽  
Christian Hasenstab --
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Raw Material ◽  
Cut Flowers ◽  
Environmental Evaluation ◽  
Fertilizer Use ◽  
Transport Phase

Colombia is a major flower exporter of a wide variety of species, among which the chrysanthemum plays a major role due to its exporting volume and profitability on the international market. This study examines the major environmental impacts of the chrysanthemum supply chain through a life cycle assessment (LCA). One kg of stems export quality was used as the functional unit (FU). The study examines cut-flowers systems from raw material extraction to final product commercialization for two markets (London and Miami) and analyzes two agroecosystems: one certified system and one uncertified system. The transport phase to London resulted in more significant environmental impacts than the transport phase to Miami, and climate change (GWP100) category was significant in both cities, generating values of 9.10E+00 and 2.51E+00 kg CO2-eq*FU for London and Miami, respectively. Furthermore, when exclusively considering pre-export phases, the uncertified system was found to have a greater impact than the certified system with respect to fertilizer use (certified 1,448E-02 kg*FU, uncertified 2.23E-01 kg*FU) and pesticide use (certified 1.24 E-04 kg*FU, uncertified 2.24E-03 kg*FU). With respect to the crop management, eutrophication (EP) and acidification (AP) processes imposed the greatest level of environmental impact. Strategies that would significantly reduce the environmental impact of this supply chain are considered, including the use of shipping and a 50% reduction in fertilizer use.

scholarly journals Evaluation of Environmental Impact of Cement Production in Algeria Using Life Cycle Assessment

2015 ◽  
Vol 45 ◽  
pp. 79-84
Author(s):  
S. Boughrara ◽  
M. Chedri ◽  
K. Louhab
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Raw Material ◽  
Cement Production ◽  
Dry Process ◽  
The Impact ◽  
Inputs And Outputs

The aim of this study is the use of Life Cycle Assessment, to evaluate the impact generated by cement manufactory situated in Sour EL Ghozlane town in Algeria country, which use the dry process to produce cement Portland. The LCA method is used for compiling and examining the inputs and outputs of energy, raw material and environmental impacts directly attributable to the manufacture and functioning of a product throughout its life. It is also used to determine element and energy contributing to each impact evaluated. Potentials impacts are evaluated using the SimaProV.7.1 software and IMPACT2000+ method in this study.

Life Cycle Assessment and Eco-Design of a Wireless TV/VCR Remote

2013 ◽  
Author(s):  
Yang Hu ◽  
Gaurav Ameta
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Solar Cell ◽  
Environmental Impacts ◽  
Waste Treatment ◽  
Raw Materials ◽  
The United States ◽  
Raw Material ◽  
Alkaline Batteries ◽  
Improve Product

The focus of this paper is to present life-cycle assessment (LCA) of a TV/VCR remote, including alkaline batteries, and to compare the environmental impacts with a redesigned remote consisting of a solar cell. LCA is a very helpful tool in identifying the most important factors for improving product sustainability. The remote considered in this study can control both television and video cassette recorder. This remote is manufactured in Malaysia and exported to the United States. Its life-cycle system includes raw material, parts, shipment, use phase and waste treatment; its life-cycle impact assessment (LCIA) is performed using SimaPro 7.1 and employing the TRACI method. LCA uncertainty analyzing is performed for both remotes utilizing Monte Carlo simulation in SimaPro 7.1. LCA result shows use of alkaline battery affects most obviously in environmental impacts. In Eco-design remote model, both energy type and raw materials changed. Environmental impacts reduce in five categories in redesigned remote. This paper: 1) presents a prototype design for product using solar cell; 2) presents a novel method for designers to determine raw materials to improve product sustainability in designing stage; 3) provides suggestions for manufacturers to improve product sustainability through reuse of solar cell or a leasing strategy.

scholarly journals Life Cycle Assessment of Ocean Energy Technologies: A Systematic Review

2019 ◽  
Vol 7 (9) ◽  
pp. 322 ◽  
Author(s):  
María Paredes ◽  
Alejandro Padilla-Rivera ◽  
Leonor Güereca
Keyword(s):  
Systematic Review ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Fossil Fuels ◽  
Impact Category ◽  
Tidal Energy ◽  
Raw Material ◽  
Ocean Energy ◽  
Energy Technologies

The increase of greenhouse gases (GHG) generated by the burning of fossil fuels has been recognized as one of the main causes of climate change (CC). Different countries of the world have developed new policies on national energy security directed to the use of renewable energies mainly, ocean energy being one of them. The implementation of ocean energy is increasing worldwide. However, the use of these technologies is not exempt from the generation of potential environmental impacts throughout their life cycle. In this context, life cycle assessment (LCA) is a holistic approach used to evaluate the environmental impacts of a product or system throughout its entire life cycle. LCA studies need to be conducted to foster the development of ocean energy technologies (OET) in sustainable management. In this paper, a systematic review was conducted and 18 LCA studies of OET were analyzed. Most of the LCA studies are focused on wave and tidal energy. CC is the most relevant impact category evaluated, which is generated mostly by raw material extraction, manufacturing stage and shipping operations. Finally, the critical stages of the systems evaluated were identified, together with, the opportunity areas to promote an environmental management for ocean energy developers.

scholarly journals Dampak Lingkungan dan Kesehatan Pemanfaatan Limbah Cat Sebagai Produk Material Bangunan

METANA ◽  
2020 ◽  
Vol 16 (1) ◽  
pp. 26-32
Author(s):  
Ari Dina Permana Citra ◽  
Hargianti Dini Iswandari
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Assessment Tool ◽  
Economic Value ◽  
Raw Material ◽  
Health Impacts ◽  
Management Model ◽  
Environmental Media ◽  
Soil Media

Limbah cat yang tidak mempunyai nilai ekonomis dan memerlukan biaya untuk pengolahannya, dapat dimanfaatkan sebagai bahan baku menjadi produk yang berguna. Limbah cat digunakan sebagai bahan baku campuran pembuatan produk bata beton (paving block) agar dapat mencegah dampak negative lingkungan. Penelitian yang dilakukan bertujuan untuk mengkaji dampak lingkungan dan kesehatan dari limbah cat dan pemanfaatannya sebagai campuran bata beton.  Dampak lingkungan sebagai ekotoksisitas dan dampak kesehatan berupa toksisitas dihitung menggunakan perangkat kajian daur hidup LCA (Life Cycle Assessment) pada variasi kadar limbah cat sebesar 1,2,3,4 dan 5% pada bata beton. Hasil kajian menunjukkan penurunan potensi dampak lingkungan dan kesehatan produk bata beton dibandingkan limbah cat padat. Ekotoksisitas limbah cat terendah pada media tanah dan tertinggi pada media perairan air tawar. Toksisitas pada manusia jauh lebih tinggi dibanding pada media lingkungan, dipakai sebagai dasar penanganan limbah cat. Pemanfaatan limbah cat sebagai bahan baku campuran bata beton dapat mengurangi ekotoksisitas dan toksisitas secara signifikan, dapat digunakan sebagai model pengelolaan limbah. Paint waste that has no economic value and requires a cost for its processing can be used as raw material to become a useful product. Waste paint is used as a raw material for the manufacture of concrete brick products (paving blocks) in order to prevent negative environmental impacts. The research carried out aims to assess the environmental and health impacts of paint waste and its use as a concrete brick mixture. Environmental impacts as ecotoxicity and health impacts in the form of toxicity are calculated using the LCA (Life Cycle Assessment) life cycle assessment tool on the variation of paint waste content of 1,2,3,4 and 5% in concrete bricks. The results of the study show a decrease in the potential environmental and health impacts of concrete brick products compared to solid paint waste. The lowest paint waste ecotoxicity in soil media and highest in freshwater waters media. Toxicity in humans is much higher than in environmental media, used as a basis for handling paint waste. The use of paint waste as raw material for concrete brick mix can significantly reduce the ecotoxicity and toxicity, it can be used as a waste management model.

scholarly journals ANALISIS POTENSI DAMPAK LINGKUNGAN DARI BUDIDAYA TEBU MENGGUNAKAN PENDEKATAN LIFE CYCLE ASSESSMENT (LCA)

2019 ◽  
Vol 15 (1) ◽  
pp. 51-64
Author(s):  
Arieyanti Dwi Astuti
Keyword(s):  
Climate Change ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Natural Resources ◽  
Environmental Impacts ◽  
Raw Material ◽  
Photochemical Oxidation ◽  
Primary Data ◽  
Human Toxicity

ENGLISHMinimizing the adverse impact of sugarcane plantation can be carried out through many ways including increasing the efficiency of energy and natural resources consumption as well as improving the management of waste and emissions. Life Cycle Assessment (LCA) was applied to assess the environmental impact of sugarcane plantation without considering sugarcane usage as a raw material in the sugar industry (gate to gate). CML (baseline) was used as Life Cycle Impact Assessment (LCIA) method. This study aimed to: 1) examine the natural resources and energy consumption; 2) analyze and identify potential environmental impacts; and 3) recommend alternative improvements to reduce environmental impacts. It used primary data and secondary data. The results showed that: 1) natural resources were used to produce 16,097 ton of sugarcane or 1 ton of sugar, were land requirement (0.233 ha), water consumption (2,223.117 m3), and energy consumption (19,234.254 MJ); 2) there are five most potential environmental impacts which are analyzed by using openLCA including climate change (134,275.23 kg CO2 eq), eutrophication (120.24 kg PO4 eq), acidification (1.54 kg SO2 eq), photochemical oxidation (0.36 kg ethylene eq), and human toxicity (0.15 kg 1.4-dichlorobenzene eq); 3) alternative recommendation could be conducted by reducing the usage of inorganic fertilizer, and utilizing cane trash (dry leaves, green leaves, and tops) as boiler fuel for production process in sugar factory. INDONESIABudidaya tebu menimbulkan dampak negatif terhadap lingkungan sehingga diperlukan upaya untuk meminimalisir dampak negatif tersebut melalui efisiensi konsumsi energi, konsumsi sumber daya alam (SDA), serta pengelolaan limbah dan emisi. LCA merupakan salah satu metode untuk menganalisis dampak lingkungan dari budidaya tebu tanpa mempertimbangkan penggunaan tebu panen sebagai bahan baku industri gula (gate to gate). Metode yang digunakan untuk LCIA adalah CML (baseline). Penelitian ini  bertujuan untuk: 1) menghitung penggunaan SDA dan energy, 2) menganalisis dan mengidentifikasi potensi dampak lingkungan, dan 3) menyajikan rekomendasi perbaikan untuk menurunkan dampak lingkungan. Data penelitian berupa data primer dan data sekunder. Unit fungsional pada penelitian ini adalah produksi 1 ton gula untuk satu tahun. Hasil penelitian menunjukkan bahwa: 1) konsumsi SDA berupa lahan tebu seluas 0,233 ha, air sebanyak 2.223,117 m3 dan energi sebesar 19.234,254 MJ; 2) potensi dampak lingkungan yang dianalisis menggunakan OpenLCA menghasilkan 5 dampak lingkungan tertinggi, yaitu climate change (134.275,23 kg CO2 eq), eutrophication (120,24 kg PO4 eq), acidification (1,54 kg SO2 eq), photochemical oxidation (0,36 kg ethylene eq), and human toxicity (0,15 kg 1,4-dichlorobenzene eq); 3) alternatif perbaikan yang direkomendasikan berupa penggunaan pupuk anorganik dengan dosis yang tepat dan memanfaatkan limbah pasca pane n (daun kering, serasah) sebagai bahan bakar boiler untuk proses produksi industri gula.

scholarly journals Life Cycle Assessment Model of Plastic Products: Comparing Environmental Impacts for Different Scenarios in the Production Stage

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 777
Author(s):  
Viktoria Mannheim
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Assessment Model ◽  
Raw Material ◽  
Municipal Wastewater Treatment ◽  
Production Stage ◽  
Plastic Products

This paper assesses the environmental loads of polypropylene and PP-PE-PET mixed-plastic products throughout the products’ life cycle in the production stage, with particular focus on the looping method. A life cycle model of homogeneous and mixed-plastic products has been developed from the raw material extraction and production phase through its transport with the help of the life cycle assessment method. To find the answers to the questions posed, different impacts were analyzed by the GaBi 9.5 software. The analysis lasted from the beginning of the production process to the end. The aim of this research was to determine the energy and material resources used, the emissions produced, and the environmental impact indicators involved. This article examines three scenarios in the production stage, based on the usage of plastic scrap and process water: (1) plastic scrap and wastewater are recirculated with looping method; (2) plastic scrap goes through an incineration process and wastewater is treated in a municipal wastewater treatment plant; (3) plastic scrap is sent to a municipal landfill and wastewater is treated. This article tries to answer three questions: (1) how can we optimize the production stage? (2) Which materials and streams are recyclable in the design of the life cycle assessment? (3) What is the relationship between the environmental impacts of homogeneous and mixed-plastic products? The results of this research can be used to develop injection-molding processes with lower environmental impacts and lower releases of emissions.

scholarly journals Residential Life Cycle Assessment Modeling: Comparative Case Study of Insulating Concrete Forms and Traditional Building Materials

2010 ◽  
Vol 5 (3) ◽  
pp. 95-106 ◽  
Author(s):  
Neethi Rajagopalan ◽  
Melissa M Bilec ◽  
Amy E Landis
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Impact Assessment ◽  
Raw Materials ◽  
Impact Category ◽  
Raw Material ◽  
Frame Structure ◽  
Use Phase ◽  
Wood Frame ◽  
The Impact

Innovative, sustainable construction products are emerging in response to market demands. One potential product, insulating concrete forms (ICFs), offers possible advantages in energy and environmental performance when compared with traditional construction materials. Even though ICFs are in part derived from a petroleum-based product, the benefits in the use phase outweigh the impacts of the raw material extraction and manufacturing phase. This paper quantitatively measures ICFs' performance through a comparative life cycle assessment of wall sections comprised of ICF and traditional wood-frame. The life cycle stages included raw materials extraction and manufacturing, construction, use and end of life for a 2,450 square foot house in Pittsburgh, Pennsylvania. Results showed that even though building products such as ICFs are energy intensive to produce and thus have higher environmental impacts in the raw materials extraction and manufacturing phase, the use phase dominated in the life cycle. For the use phase, the home constructed of ICFs consumed 20 percent less energy when compared to a traditional wood-frame structure. The results of the impact assessment show that ICFs have higher impacts over wood homes in most impact categories. The high impacts arise from the raw materials extraction and manufacturing phase of ICFs. But there are a number of embedded unit processes such as disposal of solid waste and transport of natural gas that contribute to this high impact and identifying the top unit process and substance contributors to the impact category is not intuitive. Selecting different unit processes or impact assessment methods will yield dissimilar results and the tradeoffs associated with every building product should be considered after studying the entire life cycle in detail.

Sign in / Sign up

Export Citation Format

Share Document