In the last two decades there has been a progressive increase in the scope of small gas turbine development and application, both in commercial and military fields. Technological advances in the military field have created demands for prime movers able to meet more stringent operational requirements. An environment now exists in the U.S. Armed Forces conducive to the acceptance and use of small gas turbines that can be adapted to the many specialized applications demanding distinctive physical characteristics. In 1957, the U.S. Bureau of Naval Weapons entered into a contract with Solar, a Division of International Harvester Company, for the design and development of a small, lightweight, single-shaft gas turbine engine to power a one-man helicopter. Rated at 55 s.h.p. for 100°F ambient conditions, the engine design requirements were based on simplicity of operation and maintenance, low production cost, and a short development time. These factors were considered more important than optimum specific power, fuel consumption and weight. A two-shaft version of this engine was also required to power a one-man flying platform. To facilitate the required low engine airflow, weight and rugged characteristics, a single-stage centrifugal compressor and radial inflow turbine, mounted back to back, were selected. A unique feature of the two-shaft engine was the simple method of achieving two-shaft capability by using the exducer portion of the radial turbine as a power turbine. This design resulted in both engines having the same nominal performance, weight and envelope dimensions, with maximum component interchangeability. A comprehensive aerodynamic development programme was undertaken to improve component efficiencies and various aspects of this programme are discussed. Based on favourable results from this programme, the building and development of an uprated engine was undertaken. By incorporating a modified compressor, a 38 per cent increase in s.h.p. and a 6 per cent decrease in specific fuel consumption (s.f.c.) was obtained. Probably the most important factor in the choice of a small gas turbine for military applications is its ability to develop more power, per unit weight and volume, than other engine types. In general, the specific weight of reciprocating engines, in the same power class as the subject gas turbine, average about 10–15 lb/hp with specific volumes ranging from 0.220 to 0.30 fr3/hp, compared to values of 0.53 lb/hp and 0.027 ft3/hp for the turbine. Over 20 different variations of this engine have been produced for such diverse applications as small aircraft and boat prime movers, aircraft and helicopter auxiliary power plants, mobile generator sets, and ‘winterization’ kits for U.S. Army field service. Intensive efforts are being made by companies on both sides of the Atlantic to develop the small gas turbine for a variety of applications. It seems reasonable to predict that these efforts will ultimately lead to the development of units with improved performance and lower initial cost.
Whisper and Roar
