Numerical Analysis of the Flow Within a Clark Turbocharger Compressor

2004 ◽  
Author(s):  
K. S. Chapman ◽  
Sudip Dey ◽  
Ali Keshavarz
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Numerical Analysis ◽  
Flow Field ◽  
Field Test ◽  
Numerical Results ◽  
Operating Conditions ◽  
Flow Recirculation ◽  
Flow Through

The flow field within a Clark turbocharger compressor has been thoroughly analyzed by numerical simulation. The numerical simulation was validated with experimental data collected from field test sites. The numerical results are found to closely match the experimental data. Once validated, the numerical simulation was used to investigate the flow field within the turbocharger compressor under a variety of operating conditions. Several regions of flow recirculation were identified that restrict flow through the turbocharger.

scholarly journals A Numerical Simulation of the Inviscid Flow Through a Counterrotating Propeller

1986 ◽  
Vol 108 (2) ◽  
pp. 187-193 ◽  
Author(s):  
M. L. Celestina ◽  
R. A. Mulac ◽  
J. J. Adamczyk
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
High Speed ◽  
Inviscid Flow ◽  
Solution Procedure ◽  
Numerical Results ◽  
Governing Equations ◽  
Flow Through ◽  
Coding Strategy

This paper presents the results of a numerical simulation of the time-averaged inviscid flow field through the blade rows of a multiblade row turboprop configuration. The governing equations are outlined along with a discussion of the solution procedure and coding strategy. Numerical results obtained from a simulation of the flow field through a modern high-speed turboprop will be shown.

Behavior of Simulated Molten Metal at Channel Modeled Boiling Water Reactors

2017 ◽  
Author(s):  
Yutaro Hihara ◽  
Kota Matsuura ◽  
Hideaki Monji ◽  
Yutaka Abe ◽  
Akiko Kaneko ◽  
...  
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Numerical Analysis ◽  
Molten Metal ◽  
Numerical Results ◽  
Boiling Water ◽  
Severe Accident ◽  
Boiling Water Reactors ◽  
Simulation Code ◽  
Water Reactors

When a severe accident occurs, decommissioning work becomes important task. In the decommissioning work after the severe accident, establishing the way to estimate the sedimentation place of molten debris is important. However, the technique to estimate exactly sedimentation place has not been enough. Therefore, the detailed and phenomenological numerical simulation code named JUPITER for predicting the molten core behavior is under development. The comparison between experimental and numerical results is necessary to clarify the validity of the numerical analysis code. This study provides the experimental data for a BWR to examine the numerical simulation code in order to contribute to progress of the decommissioning work.

Simulation of a Free Standing Riser Model and Validation With Experimental Results

2014 ◽  
Author(s):  
Marcio Yamamoto ◽  
Sotaro Masanobu ◽  
Satoru Takano ◽  
Shigeo Kanada ◽  
Tomo Fujiwara ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Previous Experiment ◽  
Numerical Results ◽  
Experimental Results ◽  
Previous Article ◽  
Scale Model ◽  
Analysis Software ◽  
Free Standing ◽  
Reduced Scale

In this article, we present the numerical analysis of a Free Standing Riser. The numerical simulation was carried out using a commercial riser analysis software suit. The numerical model’s dimensions were the same of a 1/70 reduced scale model deployed in a previous experiment. The numerical results were compared with experimental results presented in a previous article [1]. Discussion about the model and limitations of the numerical analysis is included.

Vibro-Stone Column Reinforcement Mechanism and Numerical Analysis

2012 ◽  
Vol 446-449 ◽  
pp. 1940-1943
Author(s):  
Yang Liu ◽  
Hong Xiang Yan
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Pore Pressure ◽  
Numerical Procedure ◽  
Numerical Results ◽  
Excess Pore Pressure ◽  
Stone Column ◽  
Reinforcement Mechanism ◽  
Consolidation Theory ◽  
Excess Pore

Numerical simulation of vibro-stone column is taken to simulate the installation of vibro-stone column. A relationship based on test is adopted to calculate the excess pore pressure induced by vibratory energy during the installation of vibro-stone column. A numerical procedure is developed based on the formula and Terzaghi-Renduric consolidation theory. Finally numerical results of composite stone column are compared single stone column.

On Numerical Simulation of the Stepped Soil-Nail Wall

2013 ◽  
Vol 353-356 ◽  
pp. 692-695
Author(s):  
Chang Zhi Zhu ◽  
Quan Chen Gao
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Internal Force ◽  
Numerical Results ◽  
Analysis Model ◽  
Foundation Pit ◽  
Soil Nails ◽  
Soil Nail ◽  
Soil Nail Wall ◽  
Design And Construction

Based on an Engineering Example which was supported by the stepped soil-nail wall, a numerical analysis model was established by FLAC3D,and the process of the excavation and supporting was simulated, and the numerical results of the soil nails internal force and foundation pit deformation were obtained. The simulated result was consistent with the measured results. It shows that the method of FLAC3D numerical analysis can be used to the numerical analysis of foundation pit excavation and supporting, and it will provide the basis for the design and construction of practice project.

scholarly journals The Design and Evaluation of a 14 Stage, 16:1 Pressure Ratio Compressor for an Industrial Gas Turbine

1996 ◽  
Author(s):  
Mohammad R. Saadatmand
Keyword(s):  
Experimental Data ◽  
Gas Turbine ◽  
Rotor Blade ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Suction Surface ◽  
Design Intent ◽  
Flow Through ◽  
Industrial Gas Turbine

The aerodynamic design process leading to the production configuration of a 14 stage, 16:1 pressure ratio compressor for the Taurus 70 gas turbine is described. The performance of the compressor is measured and compared to the design intent. Overall compressor performance at the design condition was found to be close to design intent. Flow profiles measured by vane mounted instrumentation are presented and discussed. The flow through the first rotor blade has been modeled at different operating conditions using the Dawes (1987) three-dimensional viscous code and the results are compared to the experimental data. The CFD prediction agreed well with the experimental data across the blade span, including the pile up of the boundary layer on the corner of the hub and the suction surface. The rotor blade was also analyzed with different grid refinement and the results were compared with the test data.

scholarly journals Numerical simulation of flow field in chemical vapor reactor for nanoparticle synthesized

2020 ◽  
Vol 24 (Suppl. 1) ◽  
pp. 31-37
Author(s):  
Shu Zhang ◽  
Wei Wang ◽  
Hong Sun ◽  
Dumitru Baleanu
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Flow Field ◽  
Turbulent Diffusion ◽  
Nanoparticle Synthesis ◽  
Chemical Vapor ◽  
Operating Conditions ◽  
Wall Function ◽  
Alumina Production ◽  
Dissipation Model

This paper provided a numerical simulation of fluid dynamics in the chemical vapor reactor for nanoparticle synthesis. Standard k-? turbulence equation and eddy-dissipation model with standard wall function were used to investigate the reaction process of turbulent diffusion for alumina production. Here the tempera?ture and the operating conditions are discussed. Numerical results show that the model can well describe synthesis of nanometer alumina. The chemical reactions for alumina by this reactor are mainly concentrated in the range of 200 mm after the nozzle. The materials are completely mixed after 400 mm in the reactor.

Numerical Analysis of the Flow Inside a Centrifugal Compressor’s Vaneless Diffuser and Volute

2001 ◽  
Author(s):  
Hooman Rezaei ◽  
Abraham Engeda ◽  
Paul Haley
Keyword(s):  
Experimental Data ◽  
Numerical Analysis ◽  
Mass Flow ◽  
Operating Conditions ◽  
Vaneless Diffuser ◽  
Flow Angle ◽  
Flow Rates ◽  
Mass Flow Rates ◽  
Minimum Medium ◽  
Good Agreement

Abstract The objective of this work was to perform numerical analysis of the flow inside a modified single stage CVHF 1280 Trane centrifugal compressor’s vaneless diffuser and volute. Gambit was utilized to read the casing geometry and generating the vaneless diffuser. An unstructured mesh was generated for the path from vaneless diffuser inlet to conic diffuser outlet. At the same time a meanline analysis was performed corresponding to speeds and mass flow rates of the experimental data in order to obtain the absolute velocity and flow angle leaving the impeller for those operating conditions. These values and experimental data were used as inlet and outlet boundary conditions for the simulations. Simulations were performed in Fluent 5.0 for three speeds of 2000, 3000 and 3497 RPM and mass flow rates of minimum, medium and maximum. Results are in good agreement with the experimental ones and present the flow structures inside the vaneless diffuser and volute.

scholarly journals Flow Field Research of the Reciprocating Baffled Flocculation Tank

2020 ◽  
Vol 2 (1) ◽  
pp. 29
Author(s):  
Ying Xu ◽  
Yuebin Wu ◽  
Huan Liang ◽  
Qiang Sun
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Flow Field ◽  
Particle Image ◽  
Field Research ◽  
Hydraulic Characteristics ◽  
Flocculation Efficiency ◽  
Image Velocimetry ◽  
Hydraulic Conditions ◽  
The Standard Model

To research the reasons for the unsatisfactory hydraulic conditions of the reciprocating baffled flocculation tank, this paper investigates its flow field through PIV (Particle Image Velocimetry) laboratory experiment tests and numerical simulation. Three numerical schemes, the standard model, RNG model and realizable model, are calibrated and validated with the experimental data gained in this study. They are adopted for comparative study of their validity and accuracy for modeling the effect of the hydraulic characteristics of the flow field on flocculation. The best validated model is then applied to explain the reasons for the low flocculation efficiency and is applied to improve the structure of the reciprocating baffled flocculation tank.

Numerical Simulation on the Electrophoretic Motion of Multiple Particles in Microchannels

2004 ◽  
Author(s):  
Chunzhen Ye ◽  
Dongqing Li
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Electric Field ◽  
Particle Motion ◽  
Outer Region ◽  
Numerical Results ◽  
The Other ◽  
Double Layers ◽  
Rectangular Microchannel ◽  
Moving Particle

This paper considers the electrophoretic motion of multiple spheres in an aqueous electrolyte solution in a straight rectangular microchannel, where the size of the channel is close to that of the particles. This is a complicated 3-D transient process where the electric field, the flow field and the particle motion are coupled together. The objective is to numerically investigate how one particle influences the electric field and the flow field surrounding the other particle and the particle moving velocity. It is also aimed to investigate and demonstrate that the effects of particle size and electrokinetic properties on particle moving velocity. Under the assumption of thin electrical double layers, the electroosmotic flow velocity is used to describe the flow in the inner region. The model governing the electric field and the flow field in the outer region and the particle motion is developed. A direct numerical simulation method using the finite element method is adopted to solve the model. The numerical results show that the presence of one particle influences the electric field and the flow field adjacent to the other particle and the particle motion, and that this influences weaken when the separation distance becomes bigger. The particle motion is dependent on its size, with the smaller particle moving a little faster. In addition, the zeta potential of particle has an effective influence on the particle motion. For a faster particle moving from behind a slower one, numerical results show that the faster moving particle will climb and then pass the slower moving particle then two particles’ centers are not located on a line parallel to the electric field.

Sign in / Sign up

Export Citation Format

Share Document