Predictive Modeling of Acoustic Signals From Thermoacoustic Power Sensors (TAPS)

2016 ◽  
Author(s):  
Christopher M. Dumm ◽  
Jeffrey S. Vipperman ◽  
Jorge V. Carvajal ◽  
Melissa M. Walter ◽  
Luke Czerniak ◽  
...  
Keyword(s):  
Predictive Modeling ◽  
Acoustic Waves ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Signal Propagation ◽  
Acoustic Signals ◽  
Operating Conditions ◽  
Liquid Sodium ◽  
Thermoacoustic Engines ◽  
Self Powered

Thermoacoustic Power Sensor (TAPS) technology offers the potential for self-powered, wireless measurement of nuclear reactor core operating conditions. TAPS are based on thermoacoustic engines, which harness thermal energy from fission reactions to generate acoustic waves by virtue of gas motion through a porous stack of thermally nonconductive material. TAPS can be placed in the core, where they generate acoustic waves whose frequency and amplitude are proportional to the local temperature and radiation flux, respectively. TAPS acoustic signals are not measured directly at the TAPS; rather, they propagate wirelessly from an individual TAPS through the reactor, and ultimately to a low-power receiver network on the vessel’s exterior. In order to rely on TAPS as primary instrumentation, reactor-specific models which account for geometric/acoustic complexities in the signal propagation environment must be used to predict the amplitude and frequency of TAPS signals at receiver locations. The reactor state may then be derived by comparing receiver signals to the reference levels established by predictive modeling. In this paper, we develop and experimentally benchmark a methodology for predictive modeling of the signals generated by a TAPS system, with the intent of subsequently extending these efforts to modeling of TAPS in a liquid sodium environment.

SIMULASI KARAKTERISTIK ALIRAN DAN SUHU FLUIDA PENDINGIN (H2O) PADA TERAS REAKTOR NUKLIR SMR (SMALL MODULAR REACTOR)

ROTASI ◽  
2013 ◽  
Vol 15 (4) ◽  
pp. 33
Author(s):  
Anwar Ilmar Ramadhan ◽  
Indra Setiawan ◽  
M. Ivan Satryo
Keyword(s):  
Fluid Flow ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Heat Removal ◽  
Axial Direction ◽  
Operating Conditions ◽  
Fluid Temperature ◽  
Wide Range ◽  
Fuel Reactor ◽  
Performance Of Heat Transfer

Safety is an issue that is of considerable concern in the design, operation and development of a nuclear reactor. Therefore, the method of analysis used in all these activities should be thorough and reliable so as to predict a wide range of operating conditions of the reactor, both under normal operating conditions and in the event of an accident. Performance of heat transfer to the cooling of nuclear fuel, reactor safety is key. Poor heat removal performance would threaten the integrity of the fuel cladding which could further impact on the release of radioactive substances into the environment in an uncontrolled manner to endanger the safety of the reactor workers, the general public, and the environment. This study has the objective is to know is profile contour of fluid flow and the temperature distribution pattern of the cooling fluid is water (H2O) in convection in to SMR reactor with fuel sub reed arrangement of hexagonal in forced convection. In this study will be conducted simulations on the SMR reactor core used sub channel hexagonal using CFD (Computational Fluid Dynamics) code. And the results of this simulation look more upward (vector of fluid flow) fluid temperature will be warm because the heat moves from the wall to the fluid heater. Axial direction and also looks more fluid away from the heating element temperature will be lower.

Thermoacoustic engines as self-powered sensors within a nuclear reactor

2014 ◽  
Vol 135 (4) ◽  
pp. 2275-2276
Author(s):  
Steven L. Garrett ◽  
Randall A. Ali ◽  
James A. Smith
Keyword(s):  
Nuclear Reactor ◽  
Thermoacoustic Engines ◽  
Self Powered

Assessing Advanced Test Reactor Process States Using Acoustic Measurement Infrastructure

2017 ◽  
Author(s):  
Vivek Agarwal ◽  
James A. Smith
Keyword(s):  
Nuclear Reactor ◽  
Signal Transmission ◽  
National Laboratory ◽  
Reactor Core ◽  
Operating Conditions ◽  
Acoustic Measurement ◽  
Primary Coolant ◽  
Test Reactor ◽  
Operation Cycle ◽  
Measurement Infrastructure

The core of any nuclear reactor presents a particularly harsh environment for sensors and instrumentations. The reactor core also imposes challenging constraints on signal transmission from inside the reactor core to outside of the reactor vessel. In this paper, an acoustic measurement infrastructure installed at the Advanced Test Reactor (ATR), located at Idaho National Laboratory, is presented. The measurement infrastructure consists of ATR in-pile structural components, coolant, acoustic receivers, primary coolant pumps, a data-acquisition system, and signal processing algorithms. Intrinsic and cyclic acoustic signals generated by the operation of the primary coolant pumps are collected and processed. The characteristics of the intrinsic signal can indicate the process state of the ATR (such as reactor startup, reactor criticality, reactor attaining maximum power, and reactor shutdown) during operation (i.e., real-time measurement). This paper demonstrated different in acoustic signature of the ATR under different operating conditions. In particular, ATR acoustic baseline is captured during typical operation cycle and during power axial locator mechanism operation cycle. The difference in two acoustic baseline is significant and highlights salient difference that are critical in the design and development of acoustically telemetered sensors.

scholarly journals CALCULATION OF RADIOACTIVE SOURCE TERM RELEASE FROM FLEXBLUE NPP

2021 ◽  
Vol 23 (2) ◽  
pp. 63
Author(s):  
Muhammad Budi Setiawan ◽  
Pande Made Udiyani
Keyword(s):  
Nuclear Power ◽  
Noble Metals ◽  
Nuclear Reactor ◽  
Source Term ◽  
Reactor Core ◽  
Fission Products ◽  
Operating Conditions ◽  
Normal Operating ◽  
Small Modular Reactor ◽  
Mechanistic Approach

One of the National Research Programs (PRN) in the energy sector of the Indonesian Ministry of Research and Technology for the period of 2020-2024 is small modular reactor (SMR) nuclear power plant (NPP) assessment. The France’s Flexblue is a PWR-based SMR submerged reactor with a power of 160 MWe. The Flexblue reactor module was built on the ocean site and easily provided the supply of reactor modules, in accordance with the conditions of Indonesia as an archipelagic country. Therefore, it is necessary to know the release of fission products (source term), which is necessary for the study of the radiation safety of a nuclear reactor. This paper aims to examine the source term in normal operating conditions and abnormal normal operating conditions, as well as postulated accidents. Based on the Flexblue reactor core parameter data, the calculation of the reactor core inventory uses the ORIGEN2 software is previously evaluated. The source term calculation uses a mechanistic approach and a graded approach. The normal source term is calculated assuming the presence of impurities on the fuel plate, due to fabrication limitations. Meanwhile, the abnormal source term is postulated in the LOCA event. The core reactor inventory and source term is divided into 8 radionuclide groups which are Noble gasses group (Xe, Kr); Halogen (I); Akali Metal (Cs, Rb); Tellurium Group (Te, Sb, Sc); Barium-Strontium Group (Ba, Sr); Noble Metals (Ru, Rh, Pd, Mo, Tc, Co); Lanthanides group (La, Zr, Nd, Eu, Nb, Pm, Pr, Sm, Y, Cm, Am) and Cerium Group (Ce, Pu , Np).

scholarly journals Patchy nuclear chain reactions

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Eric Dumonteil ◽  
Rian Bahran ◽  
Theresa Cutler ◽  
Benjamin Dechenaux ◽  
Travis Grove ◽  
...  
Keyword(s):  
Nuclear Reactor ◽  
Reactor Core ◽  
Rensselaer Polytechnic Institute ◽  
Operating Conditions ◽  
Chain Reactions ◽  
Branching Random Walks ◽  
Stochastic Fluctuations ◽  
Nuclear Chain ◽  
Reactor Operating ◽  
Experimental Findings

AbstractStochastic fluctuations of the neutron population within a nuclear reactor are typically prevented by operating the core at a sufficient power, since a deterministic (i.e., exactly predictable) behavior of the neutron population is required by automatic safety systems to detect unwanted power excursions. In order to characterize the reactor operating conditions at which the fluctuations vanish, an experiment was designed and took place in 2017 at the Rensselaer Polytechnic Institute Reactor Critical Facility. This experiment however revealed persisting fluctuations and striking patchy spatial patterns in neutron spatial distributions. Here we report these experimental findings, interpret them by a stochastic modeling based on branching random walks, and extend them using a “numerical twin” of the reactor core. Consequences on nuclear safety will be discussed.

scholarly journals Fabrication and Testing of a Modular Micro-Pocket Fission Detector Instrumentation System for Test Nuclear Reactors

2018 ◽  
Vol 170 ◽  
pp. 04018
Author(s):  
Michael A. Reichenberger ◽  
Daniel M. Nichols ◽  
Sarah R. Stevenson ◽  
Tanner M. Swope ◽  
Caden W. Hilger ◽  
...  
Keyword(s):  
Neutron Flux ◽  
Nuclear Reactor ◽  
Modular Design ◽  
Reactor Core ◽  
Operating Conditions ◽  
Sensor Nodes ◽  
Detector Array ◽  
State University ◽  
The Core ◽  
Kansas State University

Advancements in nuclear reactor core modeling and computational capability have encouraged further development of in-core neutron sensors. Measurement of the neutron-flux distribution within the reactor core provides a more complete understanding of the operating conditions in the reactor than typical ex-core sensors. Micro-Pocket Fission Detectors have been developed and tested previously but have been limited to single-node operation and have utilized highly specialized designs. The development of a widely deployable, multi-node Micro-Pocket Fission Detector assembly will enhance nuclear research capabilities. A modular, four-node Micro-Pocket Fission Detector array was designed, fabricated, and tested at Kansas State University. The array was constructed from materials that do not significantly perturb the neutron flux in the reactor core. All four sensor nodes were equally spaced axially in the array to span the fuel-region of the reactor core. The array was filled with neon gas, serving as an ionization medium in the small cavities of the Micro-Pocket Fission Detectors. The modular design of the instrument facilitates the testing and deployment of numerous sensor arrays. The unified design drastically improved device ruggedness and simplified construction from previous designs. Five 8-mm penetrations in the upper grid plate of the Kansas State University TRIGA Mk. II research nuclear reactor were utilized to deploy the array between fuel elements in the core. The Micro-Pocket Fission Detector array was coupled to an electronic support system which has been specially developed to support pulse-mode operation. The Micro-Pocket Fission Detector array composed of four sensors was used to monitor local neutron flux at a constant reactor power of 100 kWth at different axial locations simultaneously. The array was positioned at five different radial locations within the core to emulate the deployment of multiple arrays and develop a 2-dimensional measurement of neutron flux in the reactor core.

Various Design Aspects of the Canadian Supercritical Water-Cooled Reactor Core

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
Metin Yetisir ◽  
Rui Xu ◽  
Michel Gaudet ◽  
Mohammad Movassat ◽  
Holly Hamilton ◽  
...  
Keyword(s):  
Supercritical Water ◽  
Thermal Efficiency ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Operating Conditions ◽  
Stress Distributions ◽  
Light Water Reactors ◽  
Core Components ◽  
Water Reactors ◽  
Supercritical Water Cooled Reactor

The Canadian Supercritical Water-Cooled Reactor (SCWR) is a 1200 MW(e) channel-type nuclear reactor. The reactor core includes 336 vertical pressurized fuel channels immersed in a low-pressure heavy water moderator and calandria vessel containment. The supercritical water (SCW) coolant flows into the fuel channels through a common inlet plenum and exits through a common outlet header. One of the main features of the Canadian SCWR concept is the high-pressure (25 MPa) and high-temperature (350°C at the inlet, 625°C at the outlet) operating conditions that result in an estimated thermal efficiency of 48%. This is significantly higher than the thermal efficiency of the present light water reactors, which is about 33%. This paper presents a description of the Canadian SCWR core design concept; various numerical analyses performed to understand the temperature, flow, and stress distributions of various core components; and how the analyses results provided input for improved concept development.

Full Implicit Integrate Solution to the Coupled Neutronics/Thermal-Hydraulics Problems

2013 ◽  
Author(s):  
Han Zhang ◽  
Fu Li
Keyword(s):  
Nuclear Reactor ◽  
Reactor Core ◽  
Thermal Hydraulics ◽  
Field Equations ◽  
Krylov Method ◽  
Tightly Coupled ◽  
Physical Insight ◽  
Second Order Convergence ◽  
The Individual ◽  
Integrate Solution

The traditional solution of the coupled neutronics/ thermal-hydraulics problems has typically been performed by solving the individual field separately and then transferring information between each other. In this paper, full implicit integrate solution to the coupled neutronics/ thermal-hydraulic problem is investigated. There are two advantages compared with the traditional method, which are high temporal accuracy and stability. The five equations of single-phase flow, the solid heat conduction and the neutronics are employed as a simplified model of a nuclear reactor core. All these field equations are solved together in a tightly coupled, nonlinear fashion. Firstly, Newton-based method is employed to solve nonlinear systems due to its local second-order convergence rate. And then the Krylov iterative method is used to solve the linear systems which are from the Newton linearization. The two procedures above are the so-called Newton-Krylov method. Furthermore, in order to improve the performance of the Krylov method, physics-based preconditioner is employed, which is constructed by the physical insight. Finally, several Newton-Krylov solution approaches are carried out to compare the performance of the coupled neutronics / thermal-hydraulic equations.

Identification of a nuclear reactor core (VVER) using recurrent neural networks

2002 ◽  
Vol 29 (10) ◽  
pp. 1225-1240 ◽  
Author(s):  
Mehrdad Boroushaki ◽  
Mohammad B. Ghofrani ◽  
Caro Lucas
Keyword(s):  
Neural Networks ◽  
Recurrent Neural Networks ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Nuclear Reactor Core
Sign in / Sign up

Export Citation Format

Share Document