Wearable Conductive Fiber Sensors for Continuous Joint Movement Monitoring

2004 ◽  
Author(s):  
Peter Gibbs ◽  
H. Harry Asada
Keyword(s):  
Continuous Monitoring ◽  
Design Parameters ◽  
Wearable Sensor ◽  
Functional Requirements ◽  
Joint Movement ◽  
Fiber Sensors ◽  
Flexible Skin ◽  
Conductive Fibers ◽  
Important Design

This paper describes a technique that uses conductive fibers as part of a wearable sensor for continuous monitoring of joint movements. Conductive fibers are incorporated into flexible, skin-tight fabrics that are comfortable and acceptable for long-term wear in everyday settings. Continuous monitoring of single or multi-axis joint movement is therefore possible, even when not in the presence of a therapist. A brief overview of the sensor design is presented, including functional requirements and important design parameters. Misalignment errors that may be created every time the subject takes off and puts on the wearable sensor are accounted for by incorporating an array of fiber sensors around the joint and analyzing each sensor’s sensitivity to joint movement during use. This eliminates any need for re-calibration after an initial calibration.

scholarly journals Domain randomization-enhanced deep learning models for bird detection

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xin Mao ◽  
Jun Kang Chow ◽  
Pin Siang Tan ◽  
Kuan-fu Liu ◽  
Jimmy Wu ◽  
...  
Keyword(s):  
Deep Learning ◽  
Continuous Monitoring ◽  
Bird Species ◽  
Training Data ◽  
Learning Models ◽  
Fine Grained ◽  
Bird Detection ◽  
Relationship Of ◽  
The Relationship

AbstractAutomatic bird detection in ornithological analyses is limited by the accuracy of existing models, due to the lack of training data and the difficulties in extracting the fine-grained features required to distinguish bird species. Here we apply the domain randomization strategy to enhance the accuracy of the deep learning models in bird detection. Trained with virtual birds of sufficient variations in different environments, the model tends to focus on the fine-grained features of birds and achieves higher accuracies. Based on the 100 terabytes of 2-month continuous monitoring data of egrets, our results cover the findings using conventional manual observations, e.g., vertical stratification of egrets according to body size, and also open up opportunities of long-term bird surveys requiring intensive monitoring that is impractical using conventional methods, e.g., the weather influences on egrets, and the relationship of the migration schedules between the great egrets and little egrets.

scholarly journals A modular design method based on TRIZ and AD and its application to cutter changing robot

2021 ◽  
Vol 13 (7) ◽  
pp. 168781402110343
Author(s):  
Mei Yang ◽  
Yimin Xia ◽  
Lianhui Jia ◽  
Dujuan Wang ◽  
Zhiyong Ji
Keyword(s):  
Modular Design ◽  
Design Method ◽  
Idea Generation ◽  
Design Parameters ◽  
Problem Analysis ◽  
Concept Design ◽  
Functional Requirements ◽  
Shield Tunneling ◽  
Structural Hierarchy ◽  
And Performance

Modular design, Axiomatic design (AD) and Theory of inventive problem solving (TRIZ) have been increasingly popularized in concept design of modern mechanical product. Each method has their own advantages and drawbacks. The benefit of modular design is reducing the product design period, and AD has the capability of problem analysis, while TRIZ’s expertise is innovative idea generation. According to the complementarity of these three approaches, an innovative and systematic methodology is proposed to design big complex mechanical system. Firstly, the module partition is executed based on scenario decomposition. Then, the behavior attributes of modules are listed to find the design contradiction, including motion form, spatial constraints, and performance requirements. TRIZ tools are employed to deal with the contradictions between behavior attributes. The decomposition and mapping of functional requirements and design parameters are carried out to construct the structural hierarchy of each module. Then, modules are integrated considering the connections between each other. Finally, the operation steps in application scenario are designed in temporal and spatial dimensions. Design of cutter changing robot for shield tunneling machine is taken as an example to validate the feasibility and effectiveness of the proposed method.

Long-term trajectories of decline in cognition and daily functioning before and after stroke

2021 ◽  
pp. jnnp-2021-326043
Author(s):  
Alis Heshmatollah ◽  
Lisanne J. Dommershuijsen ◽  
Lana Fani ◽  
Peter J. Koudstaal ◽  
M. Arfan Ikram ◽  
...  
Keyword(s):  
Continuous Monitoring ◽  
Mini Mental State Examination ◽  
Functional Decline ◽  
Population Based ◽  
Daily Functioning ◽  
Linear Mixed Effects ◽  
Before And After ◽  
State Examination

ObjectiveAlthough knowledge on poststroke cognitive and functional decline is increasing, little is known about the possible decline of these functions before stroke. We determined the long-term trajectories of cognition and daily functioning before and after stroke.MethodsBetween 1990 and 2016, we repeatedly assessed cognition (Mini-Mental State Examination (MMSE), 15-Word Learning, Letter–Digit Substitution, Stroop, Verbal Fluency, Purdue Pegboard) and basic and instrumental activities of daily living (BADL and IADL) in 14 712 participants within the population-based Rotterdam Study. Incident stroke was assessed through continuous monitoring of medical records until 2018. We matched participants with incident stroke to stroke-free participants (1:3) based on sex and birth year. Trajectories of cognition and daily functioning of patients who had a stroke 10 years before and 10 years after stroke and the corresponding trajectories of stroke-free individuals were constructed using adjusted linear mixed effects models.ResultsDuring a mean follow-up of 12.5±6.8 years, a total of 1662 participants suffered a first-ever stroke. Patients who had a stroke deviated from stroke-free controls up to 10 years before stroke diagnosis in cognition and daily functioning. Significant deviations before stroke were seen in scores of MMSE (6.4 years), Stroop (5.7 years), Purdue Pegboard (3.8 years) and BADL and IADL (2.2 and 3.0 years, respectively).ConclusionPatients who had a stroke have steeper declines in cognition and daily functioning up to 10 years before their first-ever stroke compared with stroke-free individuals. Our findings suggest that accumulating intracerebral pathology already has a clinical impact before stroke.

Long-term continuous monitoring of the dissolved CO2 performed by using a new device in groundwater of the Mt. Etna (southern Italy)

2011 ◽  
Vol 45 (9) ◽  
pp. 3005-3011 ◽  
Author(s):  
Sofia De Gregorio ◽  
Marco Camarda ◽  
Manfredi Longo ◽  
Santo Cappuzzo ◽  
Gaetano Giudice ◽  
...  
Keyword(s):  
Continuous Monitoring ◽  
Southern Italy ◽  
New Device ◽  
Mt Etna

scholarly journals SUBSTANTIATION OF THE FORM AND DETERMINATION OF THE CONSTRUCTIVE PARAMETERS OF THE ROTATION ROLLER OF SOIL

2018 ◽  
Vol 13 (3) ◽  
pp. 72-76
Author(s):  
Гумар Булгариев ◽  
Gumar Bulgariev ◽  
Геннадий Пикмуллин ◽  
Gennadiy Pikmullin ◽  
Ильгиз Галиев ◽  
...  
Keyword(s):  
Analytical Study ◽  
Point Of View ◽  
Design Parameters ◽  
Industrial Complex ◽  
Stage Of Development ◽  
Pass Through ◽  
Spiral Plate ◽  
Working Device ◽  
Important Design

At the present stage of development of the country’s agro-industrial complex, the technological process of surface tillage by combined soil-cultivating machines, simultaneously combining a number of operations in one pass through the field, causes the presence in their designs of the necessary set of various promising working organs. In view of the foregoing, a rotary soil ripper with a spiral-plate working member equipped with radially directed teeth and connected by means of rods with end flanges has been developed. Also, the researched ripper has the limits of penetration of the working element in the form of flat discs equipped with flanges and the radial stop have the ability to rotate around their axes independently of the ripper shaft. An analytical study of the working units of this ripper was carried out from the point of view of the influence of their size and teeth on the process of interaction with the soil, on the basis of which some of their parameters were determined. In conclusion, it was concluded that the analytical equations obtained allow us to justify the choice of the most important design parameters of the proposed new design and design a toothed rotary working device that reduces to constructive implementation after calculating their basic dimensions.

scholarly journals HIGH RESOLUTION CAMERA DESIGN PLANNING THEORETICAL FOUNDATIONS FOR DRIVING SYSTEMS

2021 ◽  
Author(s):  
Viacheslav S. Stadnichuk ◽  
Valentin G. Kolobrodov ◽  
Oleksii O. Mosolab ◽  
Denis Yu. Kondratenko ◽  
Dmytro I. Ryabokon
Keyword(s):  
High Resolution ◽  
Optical Glass ◽  
Light Sensitivity ◽  
Design Parameters ◽  
Optical Parameters ◽  
Functional Requirements ◽  
Modulation Transfer ◽  
Road Signs ◽  
Wide Range ◽  
Camera Design

Background. Analysis of statistical data showed that in most cases the cause of the accident is driver error and, as a consequence, violation of traffic rules. In this regard, over the past 10 years, active developments in the field of recognition of road signs and other obstacles in the path of a car have been actively developing. Car manufacturers offer ready-made built-in systems, mounted behind the interior rearview mirror and connected to the car’s on-board computer, which carries out further control of the car in a critical situation. The main disadvantage of these systems of this class is the low range of recognition of road signs, the dependence of optical parameters on temperature and low light sensitivity. Objective. The purpose of the paper is to model an athermal objective for a high-resolution camera, investigate the characteristics of lenses depending on the ambient temperature. Methods. Analysis and modeling of objectives, lenses, optical glass from different materials. Results. A high-resolution camera objective for all types of cars is proposed. An athermal objective was developed for a high-resolution camera. Conclusions. The optimized athermal design of the visible spectrum objective for long-range car cameras is considered. Car cameras typically have a fixed focus, and forward-facing cameras typically require relatively long focal lengths to provide information about distant objects. The optical system for these cameras should provide high resolution, as well as operate in a wide range of ambient temperatures. The camera design parameters are derived from the functional requirements of road sign recognition at a distance of 200 m. The objective design has five lenses with spherical surfaces. The objective has a relative aperture of f/2 and a modulation transfer function (MTF) of more than 0.5 at 111 l/mm over the entire temperature range.

scholarly journals Assessing the Usability of Online Food Ordering Websites Using a New Fuzzy Kano Method: Implications for Improvement

2019 ◽  
Vol 14 (10) ◽  
pp. 87 ◽  
Author(s):  
Arshia Taimouri ◽  
Korosh Emamisaleh ◽  
Davoud Mohammadi
Keyword(s):  
Customer Satisfaction ◽  
Rapid Development ◽  
Complete Information ◽  
Study Data ◽  
Design Parameters ◽  
The Internet ◽  
High Quality ◽  
Essential Point ◽  
The Right ◽  
Important Design

Following the rapid development of the Internet, e-commerce websites are widely used today for various goals. An essential point in the prosperity of these websites is their level of usability. Accordingly, measuring this usability is indispensable for these websites to check whether they are moving in the right path. Thus, in this article, the usability scores of five well-known online food-ordering websites in Iran have been evaluated using a novel fuzzy Kano method with respect to design parameters. In addition to assessing usability scores, the design parameters of these websites have been classified and reviewed in a detailed manner in order to determine the design priorities of these websites as one of the main results of this study. Data were gathered using a questionnaire with 190 respondents. Results demonstrated that Snappfood is the best online food-ordering website in Iran. In addition, sorting restaurants based on customer satisfaction score, using high-quality images of foods along with the image zooming feature, and the existence of complete information about foods and restaurants are the most effective and important design parameters of these types of websites according to the findings of this study.

Buckling and Postbuckling Analyses of a Skew Plate

2008 ◽  
Vol 24 (4) ◽  
pp. 347-355 ◽  
Author(s):  
H. W. Liao ◽  
H. Y. Huang
Keyword(s):  
Composite Laminates ◽  
High Order ◽  
Design Parameters ◽  
Aerospace Structures ◽  
Critical Buckling Load ◽  
Buckling Strength ◽  
Skew Plate ◽  
Post Buckling ◽  
Polynomial Expansions ◽  
Important Design

AbstractThe applications of skew plates in the construction of aerospace structures are well known. The critical buckling load and post-buckling strength are two important design parameters of skew composite laminates. In this study, the refined buckling and nonlinear postbuckling solutions of a homogenous isotropic skew plate based on polynomial expansions of various degrees have been examined. Numerical results based on high-order Rayleigh-Ritz solutions are presented for certain type of oblique plates.

Komplexitäts- Scoremodell für Schmiedeteile/Complexity score model for forgings

2021 ◽  
Vol 111 (06) ◽  
pp. 458-463
Author(s):  
Yorck Hedicke-Claus ◽  
Christopher Roe ◽  
Mareile Kriwall ◽  
Malte Stonis
Keyword(s):  
Automated Design ◽  
Design Parameters ◽  
Wird Eine ◽  
Automated Evaluation ◽  
Complexity Score ◽  
Score Model ◽  
Important Design

In diesem Beitrag wird eine Methode vorgestellt, die es ermöglicht die Komplexität eines Schmiedeteils automatisiert auf Basis der CAD-Datei des Schmiedeteils zu bestimmen. Eine automatisierte Bewertung der Schmiedeteilkomplexität ist für eine digitalisierte und automatisierte Auslegung von Stadienfolgen notwendig, um wichtige Auslegungsparameter wie den Gratanteil oder die Anzahl der Stadien festlegen zu können.   In this paper, a method is presented that enables the complexity of a forging to be determined automatically based on the CAD file of the forging. An automated evaluation of the forging complexity is necessary for a digitized and automated design of forging sequences to be able to determine important design parameters such as the flash ratio or the number of stages.

Sign in / Sign up

Export Citation Format

Share Document