Performance Comparison of Nanofluids Through Plain Channel Considering the Effects of Uncertainties in Thermophysical Properties

2016 ◽  
Author(s):  
Ningbo Zhao ◽  
Qiang Wang ◽  
Shuying Li
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Brownian Motion ◽  
Thermophysical Properties ◽  
Volume Fraction ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Performance Comparison ◽  
Constant Wall Temperature

To compare and understand the laminar thermal-hydraulic performance of plate-fin channel with rectangle plain fin by using variable thermophysical properties of the most commonly used nanofluids (Al2O3-water), a three-dimensional numerical study is investigated by using the single-phase approach at a constant wall temperature boundary condition. Different models published in literatures are considered for the thermal conductivity and viscosity. On this basis, a parametric analysis is conducted to evaluate the effects of various pertinent parameters including nanoparticle volume fraction (0%–4%), Brownian motion of nanoparticle and Reynolds number (800–1500) on the heat transfer and flow characteristics of plain fin channel in detail. All the numerical results demonstrate that the addition of Al2O3 nanoparticle can enhance the heat transfer and flow pressure loss of base fluid because of the higher thermal conductivity and viscosity for nanofluids. And these enhancements are more obvious by increasing the volume fraction of nanoparticle, increasing Reynolds number, and considering the effects of nanoparticle Brownian motion. In addition, there are significantly differences in the thermal and flow fields for different nanofluids models at a fixed Reynolds number, which means that the effective theoretical formulas and empiric corrections for the nanofluids thrmophysical properties need to be studied extensively in the future.

Quantitative Experimental Study of SiO2-Water Nanofluids on Backward-Facing Step Flow under Low Reynolds Number

2018 ◽  
Vol 916 ◽  
pp. 221-225
Author(s):  
Ji Zu Lv ◽  
Liang Yu Li ◽  
Cheng Zhi Hu ◽  
Min Li Bai ◽  
Sheng Nan Chang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Volume Fraction ◽  
Pure Water ◽  
Experimental Studies ◽  
Flow Characteristics ◽  
Thermal Engineering ◽  
Heat Transfer Medium ◽  
Step Flow

Nanofluids is an innovative study of nanotechnology applied to the traditional field of thermal engineering. It refers to the metal or non-metallic nanopowder was dispersed into water, alcohol, oil and other traditional heat transfer medium, to prepared as a new heat transfer medium with high thermal conductivity. The role of nanofluids in strengthening heat transfer has been confirmed by a large number of experimental studies. Its heat transfer mechanism is mainly divided into two aspects. On the one hand, the addition of nanoparticles enhances the thermal conductivity. On the other hand, due to the interaction between the nanoparticles and base fluid causing the changes in the flow characteristics, which is also the main factor affecting the heat transfer of nanofluids. Therefore, a intensive study on the flow characteristics of nanofluids will make the study of heat transfer more meaningful. In this experiment, the flow characteristics of SiO2-water nanofluids in two-dimensional backward step flow are quantitatively studied by PIV. The results show that under the same Reynolds number, the turbulence of nanofluids is larger than that of pure water. With the increase of nanofluids volume fraction, the flow characteristics are constantly changing. The quantitative analysis proved that the nanofluids disturbance was enhanced compared with the base liquid, which resulting in the heat transfer enhancement.

Heat Transfer Phenomena in a Moving Nanofluid Over a Horizontal Surface

2012 ◽  
Vol 28 (3) ◽  
pp. 579-588 ◽  
Author(s):  
K. Vajravelu ◽  
K. V. Prasad
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Brownian Motion ◽  
Differential Equations ◽  
Volume Fraction ◽  
Numerical Study ◽  
Fluid Viscosity ◽  
Variable Fluid Properties ◽  
Non Linear ◽  
Fluid Properties

AbstractA numerical study is carried out to study the effects of variable fluid properties on the boundary layer flow and heat transfer of a nanofluid at a flat sheet. The effects of Brownian motion, thermophoresis and viscous dissipation due to frictional heating are also considered. The temperature-dependent variable fluid properties, namely, the fluid viscosity and the thermal conductivity are assumed to vary, respectively, as an inverse function and a linear function of temperature. Using a similarity transformation, the governing non-linear partial differential equations of the model problem are transformed into coupled non-linear ordinary differential equations and these equations are solved numerically by Keller-Box method. Velocity, temperature, and nanoparticles volume fraction profiles are presented and analyzed for several sets of values of the governing parameters; namely, variable fluid viscosity, variable thermal conductivity, Brownaian motion, thermophoresis and plate-velocity parameters with changes in the Prandtl and Schmidt numbers. It is observed that there is an increase in the skin friction in the upstream movement of the plate: But quite the opposite is true in the downstream movement of the plate. Also, the effect of the Schmidt number and the Brownian motion parameter is to reduce the Sherwood number, where as the effect of thermophoresis parameter is to enhance it.

scholarly journals Heat Transmission Reinforcers Induced by MHD Hybrid Nanoparticles for Water/Water-EG Flowing over a Cylinder

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 623
Author(s):  
Firas A. Alwawi ◽  
Mohammed Z. Swalmeh ◽  
Amjad S. Qazaq ◽  
Ruwaidiah Idris
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Liquid Velocity ◽  
Flow Characteristics ◽  
Hybrid Nanoparticles ◽  
Critical Parameters ◽  
Heat Transmission ◽  
Constant Wall Temperature

The assumptions that form our focus in this study are water or water-ethylene glycol flowing around a horizontal cylinder, containing hybrid nanoparticles, affected by a magnetic force, and under a constant wall temperature, in addition to considering free convection. The Tiwari–Das model is employed to highlight the influence of the nanoparticles volume fraction on the flow characteristics. A numerical approximate technique called the Keller box method is implemented to obtain a solution to the physical model. The effects of some critical parameters related to heat transmission are also graphically examined and analyzed. The increase in the nanoparticle volume fraction increases the heat transfer rate and liquid velocity; the strength of the magnetic field has an adverse effect on liquid velocity, heat transfer, and skin friction. We find that cobalt nanoparticles provide more efficient support for the heat transfer rate of aluminum oxide than aluminum nanoparticles.

Numerical Investigation of Turbulent Magnetic Nanofluid Flow inside Straight Channels

2016 ◽  
Vol 819 ◽  
pp. 382-391 ◽  
Author(s):  
Nor Azwadi Che Sidik ◽  
Mohammed Raad Abdulwahab
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Cross Section ◽  
Volume Fraction ◽  
Numerical Study ◽  
Circular Cross Section ◽  
Average Diameter ◽  
Turbulent Regime ◽  
Reynolds Number Increase ◽  
Number Increase

A numerical study using computational fluid dynamics method with an approach of single phase has been presented in order to determine the effects of the concentration of the nanoparticles and flow rate on the convective heat transfer and friction factor in turbulent regime flowing through three different straight channels (straight, circular and triangular) with different Reynolds number (5000 ≤ Re ≤ 20000) using constant applied heat flux. The nanofluid was used consist of Fe3O4 magnetic nanoparticles with average diameter of (13nm) dispersed in water with four volume fraction (0, 0.2, 0.4, 0.6%). The results revealed that as volume fraction and Reynolds number increase Nusselt number increase and the heat transfer rate in circular cross section tube is better than that in square and triangular cross section channels.

scholarly journals Numerical Study of Laminar Forced Convection of Water/Al2o3 Nanofluid in an Annulus with Constant Wall Temperature

2013 ◽  
Vol 14 (1) ◽  
Author(s):  
Amin Kashani ◽  
Davood Jalali-vahid ◽  
Siamak Hossainpour
Keyword(s):  
Heat Transfer ◽  
Forced Convection ◽  
Volume Concentration ◽  
Volume Fraction ◽  
Numerical Study ◽  
Flow Behavior ◽  
Convective Heat Transfer Coefficient ◽  
Two Phase ◽  
Constant Wall Temperature ◽  
Laminar Forced Convection

Laminar forced convection of a nanofluid consisting of water and Al2O3 in a horizontal annulus has been studied numerically. Two-phase mixture model has been used to investigate thermal behaviors of the nanofluid over constant temperature thermal boundary condition and with different volume concentration of nanoparticles. Comparisons with previously published experimental and analytical works on flow behavior in horizontal annulus show good agreements between the results as volume fraction is zero. In general convective heat transfer coefficient increases with nanoparticle concentration. ABSTRAK: Kertaskerja ini mengkaji secara numerik olakan paksa bendalir lamina yang menganduangi air dan Al2O3 didalam anulus mendatar. Model campuran dua fasa digunakan bagi mengkaji tingkah laku haba bendalir nano pada keadaan suhu malar dengan kepekatan nanopartikel berbeza. Perbandingan dengan karya eksperimen dan analitikal yang telah diterbitkan menunjukkan bahawa kelakuan aliran didalm anulus mendatar adalah baik apabila pecahan isipadu adalah sifar. Pada amnya, pekali pemindahan haba olakan meningkat dengan kepekatan nanopartikel. KEYWORDS: nanofluid; volume concentration; heat transfer enhancement; laminar flow convection; annulus

scholarly journals Experimental and Numerical Study Effect of Using Nanofluids in Perforated Plate Fin Heat Sink for Electronics Cooling

2018 ◽  
Vol 24 (8) ◽  
pp. 1
Author(s):  
Kadhum Audaa Jehhef
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Heat Dissipation ◽  
Volume Fraction ◽  
Numerical Study ◽  
Perforated Plate ◽  
Processing Unit ◽  
Transfer Enhancement

An experimental and numerical investigation of the effect of using two types of nanofluids with suspending of (Al2O3 and CuO) nanoparticles in deionized water with a volume fraction of (0.1% vol.), in addition to use three types of fin plate configurations of (smooth, perforated, and dimple plate) to study the heat transfer enhancement characteristics of commercial fin plate heat sink for cooling computer processing unit. All experimental tests under simulated conditions by using heat flux heater element with input power range of (5, 16, 35, 70, and 100 W). The experimental parameters calculated are such as water and nanofluid as coolant with Reynolds number of (7000, 8000, 9400 and 11300); the air is blown in the inlet duct across the heat sink with Reynolds number of (10500, 12300, 14200 and 16000). The distance fin-to-fin is kept constant at (2.00 mm), and the channel employed in this work has a square cross-section of (7 cm) inside. It was observed that the average effectiveness and Nusselt number of the nanofluids are higher compared with those of using conventional liquid cooling systems. However, the perforated fin plate showed higher air heat dissipation than the other configuration plate fin employed in this study. The experimental results were supported by numerical results which gave a good indication to heat transfer enhancement in studied ranges.  

scholarly journals Numerical study of heat transfer in 90° bend tube by AI2O3 nano fluids using fluid injection

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hadi Mahdizadeh ◽  
Nor Mariah Adam
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Volume Fraction ◽  
Fluid Injection ◽  
Content Type ◽  
Nano Fluid ◽  
The Impact

Purpose This paper aims to investigate increasing heat transfer in bend tube 90° by fluid injection using nano fluid flow that was performed by expending varying Reynolds number. This paper studies the increased heat transfer in the bent tube that used some parameters to examine the effects of volume fraction, nanoparticle diameter, fluid injection, Reynolds number on heat transfer and flow in a bend pipe. Design/methodology/approach Designing curved tubes increases the thermal conductivity amount between fluid and wall. It is used the finite volume method and simple algorithms to solve the conservation equations of mass, momentum and energy. The results showed that the nanoparticles used in bent tube transfusion increase the heat transfer performance by increasing the volume fraction; it has a direct impact on enhancing the heat transfer coefficient. Findings Heat transfer coefficient enhanced 1.5% when volume fraction increased from 2 % to 6%, the. It is due to the impact of nanoparticles on the thermal conductivity of the fluid. The fluid is injected into the boundary layer flow due to jamming that enhances heat transfer. Curved lines used create a centrifugal force due to the bending and lack of development that increase the heat transfer. Originality/value This study has investigated the effect of injection of water into a 90° bend before and after the bend. Specific objectives are to analyze effect of injection on heat transfer of bend tube and pressure drop, evaluate best performance of mixing injection and bend in different positions and analyze effect of nano fluid volume fraction on injection.

Effect of thickness and thermal conductivity of metal foams filled in a vertical channel – a numerical study

2019 ◽  
Vol 29 (1) ◽  
pp. 184-203 ◽  
Author(s):  
Banjara Kotresha ◽  
N. Gnanasekaran
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Metal Foam ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Vertical Channel ◽  
Metal Foams ◽  
Heat Transfer Analysis ◽  
Transfer Model ◽  
Content Type

PurposeThis paper aims to discuss about the two-dimensional numerical simulations of fluid flow and heat transfer through high thermal conductivity metal foams filled in a vertical channel using the commercial software ANSYS FLUENT.Design/methodology/approachThe Darcy Extended Forchheirmer model is considered for the metal foam region to evaluate the flow characteristics and the local thermal non-equilibrium heat transfer model is considered for the heat transfer analysis; thus the resulting problem becomes conjugate heat transfer.FindingsResults obtained based on the present simulations are validated with the experimental results available in literature and the agreement was found to be good. Parametric studies reveal that the Nusselt number increases in the presence of porous medium with increasing thickness but the effect because of the change in thermal conductivity was found to be insignificant. The results of heat transfer for the metal foams filled in the vertical channel are compared with the clear channel in terms of Colburn j factor and performance factor.Practical implicationsThis paper serves as the current relevance in electronic cooling so as to open up more parametric and optimization studies to develop new class of materials for the enhancement of heat transfer.Originality/valueThe novelty of the present study is to quantify the effect of metal foam thermal conductivity and thickness on the performance of heat transfer and hydrodynamics of the vertical channel for an inlet velocity range of 0.03-3 m/s.

Enhancement of Heat Transfer Characteristics in an Absorber Tube of a Solar-Based Energy System Using Nanofluids

2015 ◽  
Author(s):  
Adnan Alashkar ◽  
Mohamed Gadalla
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Thermophysical Properties ◽  
Volume Fraction ◽  
Effective Density ◽  
Heat Transfer Characteristics ◽  
Overall Heat Transfer Coefficient ◽  
Transfer Characteristics

In this present paper, nanoparticles are dispersed into a base fluid, their effect on the thermophysical properties and overall heat transfer coefficient of the fluid inside a circular tube representing an absorber tube of a Parabolic Trough Solar Collector (PTSC) is studied. Different models are used to predict the effective density, specific heat capacity, viscosity and thermal conductivity of the nanofluids. For the analytical analysis, Alumina (Al2O3), Copper (Cu) and Single Wall Carbon Nanotubes (SWCNT) nanoparticles are dispersed into Therminol VP-1 oil. The resulting nanofluids are compared in terms of their thermophysical properties, their convective heat transfer characteristics and their overall heat transfer coefficient. Moreover, the effect on increasing the volume fraction on the properties and the heat transfer coefficient is studied. The computational analysis results show that the thermal conductivity increases with the increase of the volume fraction. In addition Therminol/SWCNT showed the highest thermal conductivity enhancement of 98% for a volume fraction of 3%. Further, the overall heat transfer coefficient increases with the increase of volume fraction, and Therminol/SWCNT showed the highest enhancement with 72% compared to Al2O3/Therminol and Cu/Therminol that showed an enhancement of 29% and 43% respectively.

Effect of Volume Fraction of Nanoparticles to the Convective Heat Transfer of Nanofluids

2011 ◽  
Vol 464 ◽  
pp. 528-531 ◽  
Author(s):  
Zhi Yong Ling ◽  
Tao Zou ◽  
Jian Ning Ding ◽  
Guang Gui Cheng ◽  
Peng Fei Fu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Volume Fraction ◽  
Small Difference ◽  
Numerical Study ◽  
Convective Heat Transfer Coefficient ◽  
Full Development ◽  
Significant Difference

A numerical study on the convective heat transfer characteristics of Cu-water nanofluid under the laminar flow condition was performed. The results show that the convective heat transfer coefficient increases with the increase of the volume fraction of the nanoparticles and the Reynolds number. There is a significant difference between the numerical simulation result and the result calculated from the Shah equation in the entrance region, but a small difference in full development areas. The numerical results agree well with that obtained from the Xuan equation when the Reynolds number and the volume fraction of the nanoparticles are small, but the errors between them increase as the increase of the Reynolds number and the volume fraction of nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document