Comparison of Bitumen’s Large Strain Viscoelastic Properties in Cables and Umbilicals to Small Strain Rheometer Measurements

2016 ◽  
Author(s):  
Bjørn Konradsen
Keyword(s):  
Shear Stress ◽  
Viscoelastic Material ◽  
Viscoelastic Properties ◽  
Large Strain ◽  
Steel Wire ◽  
Small Strain ◽  
Strain Comparison

When a steel wire armored cable or umbilical is bent, the armor wires will move relative to the underneath layer if the wires are free to move. If this movement is restricted by friction or stiff bitumen, the bending will result in shear stress in the armor wires. In the case of bitumen, the bitumen will behave as a viscoelastic material dependent on temperature, frequency, and strain. Comparison of measurements of bitumen with small and large strain shows that the viscoelastic properties of bitumen are highly affected by the size of the strain. Therefore, the small strain rheometer measurements are not suitable for describing the viscoelastic properties of bitumen in the case of repeated bending of the cable or umbilical to a certain curvature.

The Further Exploration of Applying Small-Strain and Large-Strain Formulations to SMA

2012 ◽  
Vol 529 ◽  
pp. 228-235
Author(s):  
Jie Yao ◽  
Yong Hong Zhu
Keyword(s):  
Phase Transformation ◽  
Constitutive Model ◽  
Uniaxial Tension ◽  
Driving Force ◽  
Research Team ◽  
Large Strain ◽  
Small Deformation ◽  
Small Strain ◽  
Proportional Loading ◽  
The Difference

Recently, our research team has been considering to applying shape memory alloys (SMA) constitutive model to analyze the large and small deformation about the SMA materials because of the thermo-dynamics and phase transformation driving force. Accordingly, our team use simulations method to illustrate the characteristics of the model in large strain deformation and small strain deformation when different loading, uniaxial tension, and shear conditions involve in the situations. Furthermore, the simulation result unveils that the difference is nuance concerning the two method based on the uniaxial tension case, while the large deformation and the small deformation results have huge difference based on shear deformation case. This research gives the way to the further research about the constitutive model of SMA, especially in the multitiaxial non-proportional loading aspects.

A Zebrafish Embryo Behaves both as a “Cortical Shell – Liquid Core” Structure and a Homogeneous Solid when Experiencing Mechanical Forces

2014 ◽  
Vol 20 (6) ◽  
pp. 1841-1847 ◽  
Author(s):  
Fei Liu ◽  
Dan Wu ◽  
Ken Chen
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Zebrafish Embryo ◽  
Large Strain ◽  
Liquid Core ◽  
Small Strain ◽  
Core Structure ◽  
Mechanical Forces ◽  
Cortical Shell ◽  
A Cell

AbstractMechanical properties are vital for living cells, and various models have been developed to study the mechanical behavior of cells. However, there is debate regarding whether a cell behaves more similarly to a “cortical shell – liquid core” structure (membrane-like) or a homogeneous solid (cytoskeleton-like) when experiencing stress by mechanical forces. Unlike most experimental methods, which concern the small-strain deformation of a cell, we focused on the mechanical behavior of a cell undergoing small to large strain by conducting microinjection experiments on zebrafish embryo cells. The power law with order of 1.5 between the injection force and the injection distance indicates that the cell behaves as a homogenous solid at small-strain deformation. The linear relation between the rupture force and the microinjector radius suggests that the embryo behaves as membrane-like when subjected to large-strain deformation. We also discuss the possible reasons causing the debate by analyzing the mechanical properties of F-actin filaments.

Plateau–Rayleigh instability in a soft viscoelastic material

Soft Matter ◽  
2021 ◽  
Author(s):  
S. I. Tamim ◽  
J. B. Bostwick
Keyword(s):  
Surface Tension ◽  
Stability Analysis ◽  
Dynamic Stability ◽  
Viscoelastic Material ◽  
Viscoelastic Properties ◽  
Rayleigh Instability ◽  
Cylindrical Interface

A soft cylindrical interface endowed with surface tension can be unstable to wavy undulations. The most unstable wavelength depends upon the viscoelastic properties of the material and is determined by a dynamic stability analysis.

Properties of Mouse Cutaneous Rapidly Adapting Afferents: Relationship to Skin Viscoelasticity

2004 ◽  
Vol 92 (2) ◽  
pp. 1236-1240 ◽  
Author(s):  
P. Grigg ◽  
D. R. Robichaud ◽  
Z. Del Prete
Keyword(s):  
Viscoelastic Material ◽  
Material Properties ◽  
Viscoelastic Properties ◽  
Mechanical Response ◽  
Loss Modulus ◽  
Multiple Logistic Regression Analysis ◽  
Rate Of Change ◽  
Volterra Model ◽  
Lower Sensitivity ◽  
Dynamic Stimuli

When skin is stretched, stimuli experienced by a cutaneous mechanoreceptor neuron are transmitted to the nerve ending through the skin. In these experiments, we tested the hypothesis that the viscoelastic response of the skin influences the dynamic response of cutaneous rapidly adapting (RA) neurons. Cutaneous RA afferent neurons were recorded in 3 species of mice (Tsk, Pallid, and C57BL6) whose skin has different viscoelastic properties. Isolated samples of skin and nerve were stimulated mechanically with a dynamic stretch stimulus, which followed a pseudo Gaussian waveform with a bandwidth of 0–60 Hz. The mechanical response of the skin was measured as were responses of single RA cutaneous mechanoreceptor neurons. For each neuron, the strength of association between spike responses and the dynamic and static components of stimuli were determined with multiple logistic regression analysis. The viscoelastic material properties of each skin sample were determined indirectly, by creating a nonlinear (Wiener–Volterra) model of the stress–strain relationship, and using the model to predict the complex compliance (i.e., the viscoelastic material properties). The dynamic sensitivity of RA mechanoreceptor neurons in mouse hairy skin was weakly related to the viscoelastic properties of the skin. Loss modulus and phase angle were lower (indicating a decreased viscous component of response) in Tsk and Pallid than in C57BL6 mice. However, RA mechanoreceptor neurons in Tsk and Pallid skin did not differ from those in C57 skin with regard to their sensitivity to the rate of change of stress or to the rate of change of incremental strain energy. They did have a decreased sensitivity to the rate of change of tensile strain. Thus the skin samples with lower dynamic mechanical response contained neurons with a somewhat lower sensitivity to dynamic stimuli.

scholarly journals Tilt and strain change during the explosion at Minami-dake, Sakurajima, on November 13, 2017

2021 ◽  
Author(s):  
Kohei Hotta ◽  
Masato Iguchi
Keyword(s):  
Ground Deformation ◽  
Large Strain ◽  
Phase 1 ◽  
Small Strain ◽  
Phase 2 ◽  
The North ◽  
Strombolian Eruption ◽  
Strain Change ◽  
Tilt Change

Abstract We herein propose an alternative model for deformation caused by an eruption at Sakurajima, which have been previously interpreted as being due to a Mogi-type spherical point source beneath Minami-dake. On November 13, 2017, a large explosion with a plume height of 4,200 m occurred at Minami-dake. During the three minutes following the onset of the explosion (November 13, 2017, 22:07–22:10 (Japan standard time (UTC+9); the same hereinafter), phase 1, a large strain change was detected at the Arimura observation tunnel (AVOT) located approximately 2.1 km southeast from the Minami-dake crater. After the peak of the explosion (November 13, 2017, 22:10–24:00), phase 2, a large deflation was detected at every monitoring station due to the continuous Strombolian eruption. Subsidence toward Minami-dake was detected at five out of six stations whereas subsidence toward the north of Sakurajima was detected at the newly installed Komen observation tunnel (KMT), located approximately 4.0 km northeast from the Minami-dake crater. The large strain change at AVOT as well as small tilt changes of all stations and small strain changes at HVOT and KMT during phase 1 can be explained by a very shallow deflation source beneath Minami-dake at 0.1 km below sea level (bsl). For phase 2, a deeper deflation source beneath Minami-dake at a depth of 3.3 km bsl was found in addition to the shallow source beneath Minami-dake which turned inflation after the deflation obtained during phase 1. However, this model cannot explain the tilt change of KMT. Adding a spherical deflation source beneath Kita-dake at a depth of 3.2 km bsl can explain the tilt and strain change at KMT and the other stations. The Kita-dake source was also found in a previous study of long-term ground deformation. Not only the deeper Minami-dake source MD but also the Kita-dake source deflated due to the Minami-dake explosion.

scholarly journals The ulcerative colitis associated gene FUT8 regulates the quantity and quality of secreted mucins

2021 ◽  
Author(s):  
Gerard Cantero ◽  
Carla Burballa ◽  
Yuki Ohkawa ◽  
Tomohiko Fukuda ◽  
Yoichiro Harada ◽  
...  
Keyword(s):  
Ulcerative Colitis ◽  
Shear Stress ◽  
Stress Resistance ◽  
Viscoelastic Properties ◽  
Distal Part ◽  
Proximal Colon ◽  
Mucus Layer ◽  
Intracellular Accumulation ◽  
Normal Individuals

Fucosylation of mucins, the main macrocomponents of the mucus layer that protects the digestive tract from pathogens, increases their viscoelasticity and shear stress resistance. These properties are altered in patients with ulcerative colitis (UC), which is marked by a chronic inflammation of the distal part of the colon. Here we show that the levels of Fucosyltransferase 8 (FUT8) and specific mucins are increased in the distal inflamed colon of UC patients compared to normal individuals. Overexpressing FUT8, as observed in UC, in mucin-producing HT29-18N2 colonic cell line increases trafficking of MUC1 to plasma membrane and secretion of MUC2/MUC5AC. FUT8 depletion (FUT8 KD), instead, causes intracellular accumulation of MUC1 and alters the ratio of secreted MUC2 to MUC5AC. Mucins secreted by FUT8 overexpressing cells are more resistant to shear stress compared to mucins secreted by FUT8 KD cells. These data fit well with the Fut8-/- mice phenotype, which are protected against UC. Fut8-/- mice exhibit a thinner proximal colon mucus layer with an altered ratio of neutral to acidic mucins compared to Fut8+/+ mice. Together, these data reveal that FUT8 optimizes the viscoelastic properties of the extracellular mucous by controlling the quantities of mucins secreted.

scholarly journals Elastic Properties of Magnetorheological Elastomers in a Heterogeneous Uniaxial Magnetic Field

2018 ◽  
Vol 19 (10) ◽  
pp. 3045 ◽  
Author(s):  
Takehito Kikuchi ◽  
Yusuke Kobayashi ◽  
Mika Kawai ◽  
Tetsu Mitsumata
Keyword(s):  
Magnetic Field ◽  
Elastic Properties ◽  
Uniform Magnetic Field ◽  
Large Strain ◽  
Small Strain ◽  
Experimental Results ◽  
The Other ◽  
Magnetorheological Elastomers ◽  
Other Hand ◽  
Strain Model

Magnetorheological elastomers (MREs) are stimulus-responsive soft materials that consist of polymeric matrices and magnetic particles. In this study, large-strain response of MREs with 5 vol % of carbonyl iron (CI) particles is experimentally characterized for two different conditions: (1) shear deformation in a uniform magnetic field; and (2), compression in a heterogeneous uniaxial magnetic field. For condition (1), dynamic viscoelastic measurements were performed using a rheometer with a rotor disc and an electric magnet that generated a uniform magnetic field on disc-like material samples. For condition (2), on the other hand, three permanent magnets with different surface flux densities were used to generate a heterogeneous uniaxial magnetic field under cylindrical material samples. The experimental results were mathematically modeled, and the relationship between them was investigated. We also used finite-element method (FEM) software to estimate the uniaxial distributions of the magnetic field in the analyzed MREs for condition (2), and developed mathematical models to describe these phenomena. By using these practicable techniques, we established a simple macroscale model of the elastic properties of MREs under simple compression. We estimated the elastic properties of MREs in the small-strain regime (neo–Hookean model) and in the large-strain regime (Mooney–Rivlin model). The small-strain model explains the experimental results for strains under 5%. On the other hand, the large-strain model explains the experimental results for strains above 10%.

Investigation of Small- to Large-Strain Moduli Correlations of Rockfill Materials – Application to Romaine-2 Dam

2021 ◽  
Author(s):  
Ibrahim Lashin ◽  
Michael Ghali ◽  
Marc Smith ◽  
Daniel Verret ◽  
Mourad Karray
Keyword(s):  
Large Strain ◽  
Deformation Behaviour ◽  
Numerical Data ◽  
Small Strain ◽  
Hyperbolic Model ◽  
Large Strains ◽  
Initial Modulus ◽  
Rockfill Materials ◽  
Materials Used

Establishment of a relationship between the shear wave velocity (Vs) and other geotechnical parameters of rockfill soils at large strains (oedometer modulus, Moedo, tangent modulus, Et) is considered a significant step towards more precise modelling of earth-structure deformation behaviour. In this study, four samples of different gradations, reconstituted from the rockfill materials used in the construction of the Romaine-2 dam, were experimented to correlate the small strain to large strain moduli. Development of Moedo and Vs with consolidation was measured in the laboratory using the piezoelectric ring-actuator technique (P-RAT) incorporated in a large oedometer. Therefore, a correlation between Moedo and small strain shear modulus Go was proposed. Moreover, numerical simulations were performed based on the Duncan-Chang hyperbolic model to correlate the Vs to Duncan-Chang initial modulus(Ei). Based on the experimental and numerical data, a relation between Ei and Vs of the tested rockfill has been established. Verification studies were also carried out on in-situ measurements during Romaine-2 dam construction, proofing the ability of the proposed relationships to predict Ei related to the minor principal stress (σ3) from in-situ Vs measurement. The proposed correlations could help the geotechnical designers to estimate accurately the deformation of rockfill materials from in-situ Vs measurement.

3-D Simulation for Blood Flow and Artery Compression in Asymmetric Stenotic Arteries With Axial Stretch

2001 ◽  
Author(s):  
Dalin Tang ◽  
Chun Yang ◽  
Shunnichi Kobayashi
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Shear Stress ◽  
Wall Stress ◽  
Small Strain ◽  
Rigid Wall ◽  
Severe Stenosis ◽  
Physiological Conditions ◽  
Oscillating Shear Stress ◽  
Stenotic Arteries

Abstract There has been increasing evidence that severe stenosis may cause artery compression and plaque cap rupture leading to heart attack and stroke. The physiological conditions under which that may occur and mechanisms involved are not well understood. It has been known that severe stenosis causes critical flow and wall mechanical conditions such as flow limitation, flow separation, low and oscillating shear stress distal to the stenosis, high shear stress and low or even negative flow pressure at the throat of stenosis, artery compression or even collapse. Those conditions are related to limitation of blood supply, intimal thickening and thrombosis formation, endothelism damage, platelet activation and aggregation, plaque cap rupture (for review, see [1,2]). Due to the complexity of the problem and lack of experimental data for mechanical properties of arteries under both expansion and compression, previous models were limited primarily to flow behaviors and with various limitations (axisymmetry, rigid wall, small strain, small pressure gradient). In this paper, experimental data for artery mechanical properties under physiological conditions were measured and a 3-d computational model is introduced to investigate flow behaviors and wall stress and strain distributions with fluid-structure interactions to better understand the mechanism involved in artery compression and plaque cap rupture.

Sign in / Sign up

Export Citation Format

Share Document