scholarly journals Analysis of Black Bearing Balls From a Space Shuttle Body Flap Actuator

2005 ◽  
Author(s):  
Kenneth W. Street ◽  
Marjorie F. Sovinski
Keyword(s):  
Photoelectron Spectroscopy ◽  
Space Shuttle ◽  
Degradation Pathway ◽  
Visual Appearance ◽  
X Ray ◽  
Chemical Attack ◽  
Microscopy Analysis ◽  
Ft Ir ◽  
Ir And Raman

A significantly deteriorated ball bearing mechanism from a body flap actuator on Space Shuttle OV-103 was disassembled and the balls submitted for analysis in conjunction with Return to Flight activities. The OV-103 balls, referred to as the “black balls”, were subjected to X-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared (FT-IR) and Raman micro spectroscopy, surface profilometry, and optical and electron microscopy. The spectroscopic results in combination with microscopy analysis allowed a determination of the lubricant degradation pathway. The chemical attack mechanism does not adequately explain the unique visual appearance of the black balls. Numerous efforts have unsuccessfully focused on duplication of the phenomena causing this unique surface structure and appearance of the black balls. Further detail will be presented supporting these conclusions along with plausible explanations of the unique black appearance to the balls.

Ftir and Resolved Esca Studies of Segmented Polyether Polyurethanes

1985 ◽  
Vol 55 ◽  
Author(s):  
G. L. Grobe ◽  
Joseph A. Gardella ◽  
Roland L. Chin ◽  
Lawrence Salvati
Keyword(s):  
Photoelectron Spectroscopy ◽  
Domain Size ◽  
Attenuated Total Reflectance ◽  
Concentration Gradients ◽  
X Ray ◽  
Solution Cast ◽  
Ft Ir ◽  
Segmented Polyurethanes ◽  
Hildebrand Solubility Parameter

ABSTRACTSurface analysis of biomedical materials is necessary for determination of surface structure/biological property relationships. Previous studies [3,6] have demonstrated the applicability of Angle Resolved X-Ray Photoelectron Spectroscopy (ARXPS or ARESCA) and Fourier Transform Infrared Spectroscopy (FT-IR) with Attenuated Total Reflectance (ATR) sampling. Using these surface sensitive techniques on currently marketed segmented polyurethanes (SPU) (Biomer TMand Cardiothane-51TM), we have investigated chemical and morpholgical differences between polymeric mixtures cast from solvents of varying polarity. These materials are used because of their resistance to degradation and hydrolysis.Results will show: (1) Selective casting of different constituents of the mixture as monitored by FT-IR, where polymers can be represented as opposed to block copolymers; (2) Correlation between the Hildebrand solubility parameter of the casting solvent and the portion of the polymer selectively cast; (3) Models of solution cast polymers will be presented including (concentration gradient) of the constituents; (4) SEM micrographs will provide information on domain size and the formation of these solution cast films; (5) Depths and concentration gradients will be estimated by comparing results from AHXPS and variable angle FT-IR/ATR.

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

scholarly journals An Insight into Chemistry and Structure of Colloidal 2D-WS2 Nanoflakes: Combined XPS and XRD Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1969
Author(s):  
Riccardo Scarfiello ◽  
Elisabetta Mazzotta ◽  
Davide Altamura ◽  
Concetta Nobile ◽  
Rosanna Mastria ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Xrd Analysis ◽  
Crystal Habit ◽  
Phase Identification ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Evaluation ◽  
Rational Understanding ◽  
Structural Inspection

The surface and structural characterization techniques of three atom-thick bi-dimensional 2D-WS2 colloidal nanocrystals cross the limit of bulk investigation, offering the possibility of simultaneous phase identification, structural-to-morphological evaluation, and surface chemical description. In the present study, we report a rational understanding based on X-ray photoelectron spectroscopy (XPS) and structural inspection of two kinds of dimensionally controllable 2D-WS2 colloidal nanoflakes (NFLs) generated with a surfactant assisted non-hydrolytic route. The qualitative and quantitative determination of 1T’ and 2H phases based on W 4f XPS signal components, together with the presence of two kinds of sulfur ions, S22− and S2−, based on S 2p signal and related to the formation of WS2 and WOxSy in a mixed oxygen-sulfur environment, are carefully reported and discussed for both nanocrystals breeds. The XPS results are used as an input for detailed X-ray Diffraction (XRD) analysis allowing for a clear discrimination of NFLs crystal habit, and an estimation of the exact number of atomic monolayers composing the 2D-WS2 nanocrystalline samples.

Chemical Structures of Native Oxides Formed During Wet Chemical Treatments on NH4F Treated Si(111) Surfaces

1992 ◽  
Vol 259 ◽  
Author(s):  
Takeo Hattori ◽  
Hiroki Ogawa
Keyword(s):  
Photoelectron Spectroscopy ◽  
Attenuated Total Reflection ◽  
Native Oxide ◽  
X Ray ◽  
Chemical Treatments ◽  
Chemical Structures ◽  
Native Oxides ◽  
Ft Ir ◽  
Wet Chemical ◽  
Silicon Interface

ABSTRACTChemical structures of native oxides formed during wet chemical treatments on NH4F treated Si(111) surfaces were investigated using X-ray Photoelectron Spectroscopy (XPS) and Fourier Transformed Infrared Attenuated Total Reflection(FT-IR-ATR). It was found that the amounts of Si-H bonds in native oxides and those at native oxide/silicon interface are negligibly small in the case of native oxides formed in H2SO4-H2O2-H2O solution. Based on this discovery, it was confirmed that native oxides can be characterized by the amount of Si-H bonds in native oxides. Furthermore, it was found that the combination of various wet chemical treatments with the treatment in NH4OH-H2O2-H2O solution results in the drastic decrease in the amount of Si-H bonds in native oxides.

scholarly journals Novel solid forms of the analgesic drug ethenzamide

2014 ◽  
Vol 70 (a1) ◽  
pp. C995-C995
Author(s):  
Duane Choquesillo-Lazarte ◽  
Cristóbal Verdugo-Escamilla ◽  
Juan Manuel García-Ruiz
Keyword(s):  
Polycrystalline Material ◽  
X Ray Diffraction ◽  
Analgesic Drug ◽  
X Ray ◽  
Solution Methods ◽  
Additional Stability ◽  
Ft Ir ◽  
Model Drug ◽  
Solid Form ◽  
Ir And Raman

The interest in multicomponent solid forms has increased in the last years within the pharmaceutical industry and also the solid-state community due to the possibility of obtaining materials with new properties [1]. Crystallization strategies, supported by solvent- and solid-based techniques, have also received attention in the search and development of methodologies for the screening of multicomponent crystals. In this work, ethenzamide, an anti-inflammatory and analgesic drug, was selected as a model drug to develop cocrystals on the basis of the synthon types using a series of phenolic coformers. Ethenzamide cocrystals and cocrystal solvates have been reported recently [2,3]. Liquid Assisted Grinding (LAG) and solution methods were used as synthetic tools. Attempts to produce cocrystals by LAG and Reaction Crystallization led to the formation of polycrystalline material. The solids obtained were then characterized by powder X-ray diffraction (PXRD), FT-IR and Raman spectroscopy. Recrystallization by slow solvent evaporation was carried out when the above-referred techniques strongly suggest the formation of a new solid form. The structure of five new multicomponent solids has been determined by single crystal X-ray diffraction. Additional stability studies have been performed at controlled relative humidity conditions and followed by PXRD.

A Two-step Electrodeposition of Pd-Cu/Cu2O Nanocomposite on FTO Substrate for Non-enzymatic Hydrogen Peroxide Sensor

2021 ◽  
Vol 17 ◽  
Author(s):  
Ke Huan ◽  
Li Tang ◽  
Dongmei Deng ◽  
Huan Wang ◽  
Xiaojing Si ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Cyclic Voltammetry ◽  
Photoelectron Spectroscopy ◽  
Chemical Structure ◽  
Pd Nanoparticles ◽  
Optimal Conditions ◽  
Potential Oscillation ◽  
X Ray Diffraction ◽  
X Ray

Background: Hydrogen peroxide (H2O2) is a common reagent in the production and living, but excessive H2O2 may enhance the danger to the human body. Consequently, it is very important to develop economical, fast and accurate techniques for detecting H2O2. Methods: A simple two-step electrodeposition process was applied to synthesize Pd-Cu/Cu2O nanocomposite for non-enzymatic H2O2 sensor. Cu/Cu2O nanomaterial was firstly electrodeposited on FTO by potential oscillation technique, and then Pd nanoparticles were electrodeposited on Cu/Cu2O nanomaterial by cyclic voltammetry. The chemical structure, component, and morphology of the synthesized Pd-Cu/Cu2O nanocomposite were characterized by X-ray diffraction, scanning electron microscopy and X-ray photoelectron spectroscopy. The electrochemical properties of Pd-Cu/Cu2O nanocomposite were studied by cyclic voltammetry and amperometry. Results: Under optimal conditions, the as-fabricated sensor displayed a broad linear range (5-4000 µM) and low detection limit (1.8 µM) for the determination of H2O2. The proposed sensor showed good selectivity and reproducibility. Meanwhile, the proposed sensor has been successfully applied to detect H2O2 in milk. Conclusion: The Pd-Cu/Cu2O/FTO biosensor exhibits excellent electrochemical activity for H2O2 reduction, which has great potential application in the field of food safety.

scholarly journals Dual Light- and pH-Responsive Composite of Polyazo-Derivative Grafted Cellulose Nanocrystals

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1725 ◽  
Author(s):  
Xiaohong Liu ◽  
Ming Li ◽  
Xuemei Zheng ◽  
Elias Retulainen ◽  
Shiyu Fu
Keyword(s):  
Cellulose Nanocrystals ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
X Ray Diffraction ◽  
Responsive Materials ◽  
X Ray ◽  
Ph Response ◽  
Transmission Electron ◽  
Ft Ir ◽  
Hexyl Methacrylate

As a type of functional group, azo-derivatives are commonly used to synthesize responsive materials. Cellulose nanocrystals (CNCs), prepared by acid hydrolysis of cotton, were dewatered and reacted with 2-bromoisobuturyl bromide to form a macro-initiator, which grafted 6-[4-(4-methoxyphenyl-azo) phenoxy] hexyl methacrylate (MMAZO) via atom transfer radical polymerization. The successful grafting was supported by Fourier transform infrared spectroscopy (FT-IR) and Solid magnetic resonance carbon spectrum (MAS 13C-NMR). The morphology and surface composition of the poly{6-[4-(4-methoxyphenylazo) phenoxy] hexyl methacrylate} (PMMAZO)-grafted CNCs were confirmed with Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The grafting rate on the macro-initiator of CNCs was over 870%, and the polydispersities of branched polymers were narrow. The crystal structure of CNCs did not change after grafting, as determined by X-ray diffraction (XRD). The polymer PMMAZO improved the thermal stability of cellulose nanocrystals, as shown by thermogravimetry analysis (TGA). Then the PMMAZO-grafted CNCs were mixed with polyurethane and casted to form a composite film. The film showed a significant light and pH response, which may be suitable for visual acid-alkali measurement and reversible optical storage.

Preparation and Characterization of Ni2+-Montmorillonite/Polyvinyl Alcohol Water-Soluble Nanocomposite Film

2005 ◽  
Vol 13 (8) ◽  
pp. 839-846 ◽  
Author(s):  
Li-Ping Wang ◽  
Yun-Pu Wang ◽  
Fa-Ai Zhang
Keyword(s):  
Polyvinyl Alcohol ◽  
Photoelectron Spectroscopy ◽  
Thermal Characteristics ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Xps Spectra ◽  
X Ray ◽  
Alcohol Water ◽  
Ft Ir ◽  
Silicate Layers

A new type of nano-composite film was prepared from polyvinyl alcohol, Ni2+-montmorillonite (Ni2+-MMT), defoamer, a levelling agent and a plasticizer. Its thermal characteristics were studied by Differential Scanning Calorimetry (DSC). The intermolecular interactions were measured by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), and the tensile strength (TS) and elongation at break (%E) were measured. The microstructures were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). FT-IR and XPS spectra indicated that cross-linking has taken place between PVA and Ni2+-MMT. XRD and AFM indicate that the PVA molecules had inserted themselves into the silicate layers of MMT, exfoliating them and dispersing them randomly into the PVA matrix. Compared to pure PVA film, the TS of the films was increased and %E decreased when the Ni2+-Montmorillonite was added and the dissolution temperature of the film was also reduced.

scholarly journals Preparation and characterization of self-cleaning cotton fabric loaded with self-dispersive and reactive biphasic TiO2

2021 ◽  
Author(s):  
Kuang Wang ◽  
Jiayi Chen ◽  
Jialong Tian ◽  
Dawei Gao ◽  
Xiaolei Song ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Cotton Fabrics ◽  
Ammonia Solution ◽  
X Ray ◽  
Washing Fastness ◽  
Fastness Property ◽  
Structure Dispersion ◽  
Ft Ir ◽  
Self Cleaning

Abstract In this article, amino functionalized TiO2 (TiO2/KH550) was obtained in a mild reaction between 3-aminopropyltriethoxysilane and TiO2 with the aid of concentrated ammonia solution. 4-(4,6-dichloro-1,3,5-triazine-2-yl) amino) sodium benzenesulfonate (SAT) was synthesized and characterized by 1H NMR and fourier transform infrared spectroscopy (FT-IR). Self-dispersive and reactive TiO2 (TiO2/KH550/SAT) was prepared by nucleophile substitution reaction between TiO2/KH550 and SAT. Finally, cotton fabrics loaded with different amounts of TiO2/KH550/SAT were achieved by pad-dry-cure method. The chemical structure, dispersion and thermal performance of TiO2, TiO2/KH550 and TiO2/KH550/SAT were investigated by FT-IR, zeta potential and thermogravimetric analysis (TG). The crystalline phase, morphology, chemical composition and optical absorption property of cotton fabrics were studied by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS). Moreover, the anti-ultraviolet, self-cleaning and washing fastness properties of cotton fabrics were investigated. It has been found that TiO2/KH550/SAT demonstrated excellent dispersion stability in aqueous even after standing for a month. Cotton fabrics loaded with TiO2/KH550/SAT possessed adorable anti-ultraviolet performance, highly efficient and durable self-cleaning activity as well as appreciable washing fastness property. The mechanism and possible reactions for the preparation of self-cleaning cotton fabrics loaded with TiO2/KH550/SAT were proposed.

Sign in / Sign up

Export Citation Format

Share Document