Low-frequency long-range propagation and reverberation in the central Arctic: Analysis of experimental results

2001 ◽  
Vol 110 (2) ◽  
pp. 747-760 ◽  
Author(s):  
Greg Duckworth ◽  
Kevin LePage ◽  
Ted Farrell
Keyword(s):  
Long Range ◽  
Low Frequency ◽  
Experimental Results

scholarly journals A Multi-Mode Broadband Vibration Energy Harvester Composed of Symmetrically Distributed U-Shaped Cantilever Beams

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 203
Author(s):  
Xiaohua Huang ◽  
Cheng Zhang ◽  
Keren Dai
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Experimental Results ◽  
Vibration Energy ◽  
Cantilever Beams ◽  
Resonant Frequencies ◽  
Promising Alternative ◽  
Piezoelectric Energy ◽  
Straight Beam ◽  
Resonance Frequencies

Using the piezoelectric effect to harvest energy from surrounding vibrations is a promising alternative solution for powering small electronic devices such as wireless sensors and portable devices. A conventional piezoelectric energy harvester (PEH) can only efficiently collect energy within a small range around the resonance frequency. To realize broadband vibration energy harvesting, the idea of multiple-degrees-of-freedom (DOF) PEH to realize multiple resonant frequencies within a certain range has been recently proposed and some preliminary research has validated its feasibility. Therefore, this paper proposed a multi-DOF wideband PEH based on the frequency interval shortening mechanism to realize five resonance frequencies close enough to each other. The PEH consists of five tip masses, two U-shaped cantilever beams and a straight beam, and tuning of the resonance frequencies is realized by specific parameter design. The electrical characteristics of the PEH are analyzed by simulation and experiment, validating that the PEH can effectively expand the operating bandwidth and collect vibration energy in the low frequency. Experimental results show that the PEH has five low-frequency resonant frequencies, which are 13, 15, 18, 21 and 24 Hz; under the action of 0.5 g acceleration, the maximum output power is 52.2, 49.4, 61.3, 39.2 and 32.1 μW, respectively. In view of the difference between the simulation and the experimental results, this paper conducted an error analysis and revealed that the material parameters and parasitic capacitance are important factors that affect the simulation results. Based on the analysis, the simulation is improved for better agreement with experiments.

Quantifying the Predictive Skill in Long-Range Forecasting. Part II: Model Error in Coarse-Grained Markov Models with Application to Ocean-Circulation Regimes

2012 ◽  
Vol 25 (6) ◽  
pp. 1814-1826 ◽  
Author(s):  
Dimitrios Giannakis ◽  
Andrew J. Majda
Keyword(s):  
Long Range ◽  
Ocean Circulation ◽  
Climate Models ◽  
Markov Models ◽  
Low Frequency ◽  
Model Error ◽  
Ocean Model ◽  
Coarse Grained ◽  
Predictive Skill ◽  
Relaxation To Equilibrium

Abstract An information-theoretic framework is developed to assess the predictive skill and model error in imperfect climate models for long-range forecasting. Here, of key importance is a climate equilibrium consistency test for detecting false predictive skill, as well as an analogous criterion describing model error during relaxation to equilibrium. Climate equilibrium consistency enforces the requirement that long-range forecasting models should reproduce the climatology of prediction observables with high fidelity. If a model meets both climate consistency and the analogous criterion describing model error during relaxation to equilibrium, then relative entropy can be used as an unbiased superensemble measure of the model’s skill in long-range coarse-grained forecasts. As an application, the authors investigate the error in modeling regime transitions in a 1.5-layer ocean model as a Markov process and identify models that are strongly persistent but their predictive skill is false. The general techniques developed here are also useful for estimating predictive skill with model error for Markov models of low-frequency atmospheric regimes.

Low-frequency vibrational spectroscopy: a new tool for revealing crystalline magnetic structures in iron phosphate crystals

2021 ◽  
Vol 23 (39) ◽  
pp. 22241-22245
Author(s):  
Zihui Song ◽  
Xudong Liu ◽  
Anish Ochani ◽  
Suling Shen ◽  
Qiqi Li ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Long Range ◽  
Vibrational Spectroscopy ◽  
Strong Dependence ◽  
Low Frequency ◽  
Lithium Ion ◽  
Iron Phosphate ◽  
Promising Material ◽  
Vibrational Dynamics ◽  
Magnetic Structures

In this report, the strong-dependence of low-frequency (terahertz) vibrational dynamics on weak and long-range forces in crystals is leveraged to determine the bulk magnetic configuration of iron phosphate – a promising material for cathodes in lithium ion batteries.

Non-Linear Dynamic Magneto Electric Effects in Ferromagnetic-Ferroelectric Layered Composites

2013 ◽  
Author(s):  
Satenik Harutyunyan ◽  
Davresh Hasanyan
Keyword(s):  
Vibration Frequency ◽  
Strain Distribution ◽  
Longitudinal Vibration ◽  
Three Dimensional ◽  
Low Frequency ◽  
Structure Design ◽  
Experimental Results ◽  
Physical Parameters ◽  
Wide Range ◽  
Non Linear

A non-linear theoretical model including bending and longitudinal vibration effects was developed for predicting the magneto electric (ME) effects in a laminate bar composite structure consisting of magnetostrictive and piezoelectric multi-layers. If the magnitude of the applied field increases, the deflection rapidly increases and the difference between experimental results and linear predictions becomes large. However, the nonlinear predictions based on the present model well agree with the experimental results within a wide range of applied electric field. The results of the analysis are believed to be useful for materials selection and actuator structure design of actuator in actuator fabrication. It is shown that the problem for bars of symmetrical structure is not divided into a plane problem and a bending problem. A way of simplifying the solution of the problem is found by an asymptotic method. After solving the problem for a laminated bar, formula that enable one to change from one-dimensional required quantities to three dimensional quantities are obtained. The derived analytical expression for ME coefficients depend on vibration frequency and other geometrical and physical parameters of laminated composites. Parametric studies are presented to evaluate the influences of material properties and geometries on strain distribution and the ME coefficient. Analytical expressions indicate that the vibration frequency strongly influences the strain distribution in the laminates, and that these effects strongly influence the ME coefficients. It is shown that for certain values of vibration frequency (resonance frequency), the ME coefficient becomes infinity; as a particular case, low frequency ME coefficient were derived as well.

scholarly journals Experimental Investigation of the Propagation and Attenuation Rule of Blasting Vibration Wave Parameters Based on the Damage Accumulation Effect

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Huaibao Chu ◽  
Xiaolin Yang ◽  
Shuanjie Li ◽  
Weimin Liang
Keyword(s):  
Frequency Band ◽  
Damage Accumulation ◽  
Low Frequency ◽  
Experimental Results ◽  
Vibration Velocity ◽  
Blasting Vibration ◽  
Main Frequency ◽  
Wave Parameters ◽  
Accumulation Effect ◽  
Vibration Wave

The propagation and attenuation rule of blasting vibration wave parameters is the most important foundation of blasting vibration prediction and control. In this work, we pay more attention to the influence of the damage accumulation effect on the propagation and attenuation rule of vibration wave parameters. A blasting damage accumulation experiment was carried out, the ultrasonic wave velocity of the specimens was measured, and the damage value was calculated during the experiment. The blasting vibration wave was monitored on the surface of the specimens, and its energy was calculated by using the sym8 wavelet basis function. The experimental results showed that with the increase in the number of blasts, the damage continues to increase; however, the vibration velocity and the main frequency decrease continuously, the unfocused vibration wave energy in the zone near to the blasting source is rapidly concentrated in the low-frequency band (frequency bands 1 to 3), and the energy is further concentrated in the low-frequency band in the intermediate zone and zone far from the blasting source. There is a distortion process in which the vibration velocity and the main frequency increase slightly and the energy of the blasting vibration wave converges to the high-frequency band (the 5th band) before the sudden unstable fracture failure of the specimens. The experimental results indicate that the prediction and evaluation of blasting vibration should consider the variation rule of blasting vibration wave parameters synthetically based on the cumulative damage effect, and it is not safe to use only one fixed vibration control standard for the whole blasting operation.

Roaming Reactions and Dynamics in the van der Waals Region

2020 ◽  
Vol 71 (1) ◽  
pp. 77-100 ◽  
Author(s):  
Arthur G. Suits
Keyword(s):  
Long Range ◽  
Internal State ◽  
Chemical Reactivity ◽  
Van Der Waals ◽  
Quantum Effects ◽  
Experimental Results ◽  
Unexpected Formation ◽  
Chemical Systems ◽  
Definition Of

Roaming reactions were first clearly identified in photodissociation of formaldehyde 15 years ago, and roaming dynamics are now recognized as a universal aspect of chemical reactivity. These reactions typically involve frustrated near-dissociation of a quasibound system to radical fragments, followed by reorientation at long range and intramolecular abstraction. The consequences can be unexpected formation of molecular products, depletion of the radical pool in chemical systems, and formation of products with unusual internal state distributions. In this review, I examine some current aspects of roaming reactions with an emphasis on experimental results, focusing on possible quantum effects in roaming and roaming dynamics in bimolecular systems. These considerations lead to a more inclusive definition of roaming reactions as those for which key dynamics take place at long range.

scholarly journals A Recursive Algorithm for Indoor Positioning Using Pulse-Echo Ultrasonic Signals

Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5042
Author(s):  
Salvatore A. Pullano ◽  
Maria Giovanna Bianco ◽  
Davide C. Critello ◽  
Michele Menniti ◽  
Antonio La Gatta ◽  
...  
Keyword(s):  
Communication Systems ◽  
Polyvinylidene Fluoride ◽  
Cross Correlation ◽  
Recursive Algorithm ◽  
Low Frequency ◽  
Correlation Method ◽  
Experimental Results ◽  
Ultrasonic Signals ◽  
Average Improvement ◽  
Pulse Echo

Low frequency ultrasounds in air are widely used for real-time applications in short-range communication systems and environmental monitoring, in both structured and unstructured environments. One of the parameters widely evaluated in pulse-echo ultrasonic measurements is the time of flight (TOF), which can be evaluated with an increased accuracy and complexity by using different techniques. Hereafter, a nonstandard cross-correlation method is investigated for TOF estimations. The procedure, based on the use of template signals, was implemented to improve the accuracy of recursive TOF evaluations. Tests have been carried out through a couple of 60 kHz custom-designed polyvinylidene fluoride (PVDF) hemicylindrical ultrasonic transducers. The experimental results were then compared with the standard threshold and cross-correlation techniques for method validation and characterization. An average improvement of 30% and 19%, in terms of standard error (SE), was observed. Moreover, the experimental results evidenced an enhancement in repeatability of about 10% in the use of a recursive positioning system.

Sign in / Sign up

Export Citation Format

Share Document