Orientation Dynamics of the Methyl Radical and Matrix Molecules in Solid Methane, CH4, and CD4 at Cryogenic Temperatures

2021 ◽  
Author(s):  
Yu. A. Dmitriev
Keyword(s):  
Cryogenic Temperatures ◽  
Methyl Radical ◽  
Solid Methane

Cryogenic atomic force microscopy

1991 ◽  
Vol 49 ◽  
pp. 54-55
Author(s):  
K. A. Fisher ◽  
M. G. L. Gustafsson ◽  
M. B. Shattuck ◽  
J. Clarke
Keyword(s):  
Room Temperature ◽  
Rapid Freezing ◽  
Cryogenic Temperatures ◽  
Soft Or ◽  
Electrically Conductive ◽  
Force Microscopy ◽  
Flexible Molecules ◽  
Advantages And Disadvantages ◽  
Atomic Force ◽  
Chemical Perturbation

The atomic force microscope (AFM) is capable of imaging electrically conductive and non-conductive surfaces at atomic resolution. When used to image biological samples, however, lateral resolution is often limited to nanometer levels, due primarily to AFM tip/sample interactions. Several approaches to immobilize and stabilize soft or flexible molecules for AFM have been examined, notably, tethering coating, and freezing. Although each approach has its advantages and disadvantages, rapid freezing techniques have the special advantage of avoiding chemical perturbation, and minimizing physical disruption of the sample. Scanning with an AFM at cryogenic temperatures has the potential to image frozen biomolecules at high resolution. We have constructed a force microscope capable of operating immersed in liquid n-pentane and have tested its performance at room temperature with carbon and metal-coated samples, and at 143° K with uncoated ferritin and purple membrane (PM).

SANDMEYER SSC INVAR 36

Alloy Digest ◽  
2012 ◽  
Vol 61 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Coefficient Of Thermal Expansion ◽  
Iron Alloy ◽  
Gas Production ◽  
Liquefied Natural Gas ◽  
Cryogenic Temperatures ◽  
Steel Company ◽  
Nickel Iron ◽  
Composite Tooling ◽  
Nickel Iron Alloy

Abstract SSC Invar 36 was developed for use in applications where dimensional stability is essential. It is a nickel-iron alloy with a very low coefficient of thermal expansion from cryogenic temperatures to 200 deg C (390 deg F). It is utilized in aerospace composite tooling and die applications, as well as laser components, and cryogenic components and piping: liquefied natural gas production, storage, and transportation. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Fe-158. Producer or source: Sandmeyer Steel Company. Originally published December 2011, revised February 2012.

INCONEL ALLOY X-750

Alloy Digest ◽  
1966 ◽  
Vol 15 (7) ◽  
Keyword(s):  
Gas Turbines ◽  
Rupture Strength ◽  
Low Cost ◽  
High Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Cryogenic Temperatures ◽  
Inconel Alloy ◽  
Nickel Chromium ◽  
Corrosion And Oxidation

Abstract INCONEL alloy X-750 is an age-hardenable, nickel-chromium alloy used for its corrosion and oxidation resistance and high creep rupture strength at temperature up to 1500 F. It also has excellent properties at cryogenic temperatures. It was originally developed for use in gas turbines, but because of its low cost, high strength and weldability it has become the standards choice for a wide variety of applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-115. Producer or source: Huntington Alloy Products Division, An INCO Company.

USS 18-8S and 18-8L

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Strength ◽  
Heat Treating ◽  
Cryogenic Temperatures ◽  
United States Steel Corporation ◽  
Temperature Performance ◽  
Aisi Type ◽  
Shock Resistance ◽  
Type 304 ◽  
Excellent Stability

Abstract USS 18-8S (AISI Type 304) and USS 18-8I (AISI Type 304L) are austenitic chromium-nickel steels that are easy to fabricate and weld. They combine high strength with excellent stability and shock resistance, even at cryogenic temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-305. Producer or source: United States Steel Corporation.

ИССЛЕДОВАНИЕ НИТРИД-ГАЛЛИЕВЫХ МАЛОШУМЯЩИХ УСИЛИТЕЛЕЙ ПРИ КРИОГЕННЫХ ТЕМПЕРАТУРАХ

2020 ◽  
Vol 96 (3s) ◽  
pp. 347-352
Author(s):  
Д.Г. Алипа ◽  
В.В. Краснов ◽  
В.М. Минненбаев ◽  
А.В. Редька ◽  
Ю.В. Федоров
Keyword(s):  
Remote Sensing ◽  
Gallium Nitride ◽  
Millimeter Wave ◽  
Low Noise ◽  
Low Noise Amplifiers ◽  
Cryogenic Temperatures ◽  
Space Systems ◽  
Earth Remote Sensing ◽  
Hydrogen Level

В статье представлены результаты исследования возможности применения при криогенных температурах водородного уровня дискретных приборов и монолитных схем на основе нитрида галлия в составе малошумящих усилителей сантиметрового и миллиметрового диапазона длин волн для приемных устройств систем дистанционного зондирования Земли из космоса и в составе криогенных комплексов наблюдения космического пространства. The article presents the results of the research on the possibility of using discrete devices and gallium nitride monolithic circuits at the cryogenic temperatures of hydrogen level as part of low-noise amplifiers of centimeter and millimeter-wave bands used in receivers of Earth remote sensing space systems and in cryogenic systems for space observation.

scholarly journals A Tri-Band Cooled Receiver for Geodetic VLBI

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2662
Author(s):  
José A. López-Pérez ◽  
Félix Tercero-Martínez ◽  
José M. Serna-Puente ◽  
Beatriz Vaquero-Jiménez ◽  
María Patino-Esteban ◽  
...  
Keyword(s):  
Very Long Baseline Interferometry ◽  
Low Noise ◽  
Cryogenic Temperatures ◽  
Geospatial Information ◽  
Receiver Noise ◽  
Geodetic Vlbi ◽  
Long Baseline ◽  
Front End ◽  
X Band ◽  
Santa Maria

This paper shows a simultaneous tri-band (S: 2.2–2.7 GHz, X: 7.5–9 GHz and Ka: 28–33 GHz) low-noise cryogenic receiver for geodetic Very Long Baseline Interferometry (geo-VLBI) which has been developed at Yebes Observatory laboratories in Spain. A special feature is that the whole receiver front-end is fully coolable down to cryogenic temperatures to minimize receiver noise. It was installed in the first radio telescope of the Red Atlántica de Estaciones Geodinámicas y Espaciales (RAEGE) project, which is located in Yebes Observatory, in the frame of the VLBI Global Observing System (VGOS). After this, the receiver was borrowed by the Norwegian Mapping Autorithy (NMA) for the commissioning of two VGOS radiotelescopes in Svalbard (Norway). A second identical receiver was built for the Ishioka VGOS station of the Geospatial Information Authority (GSI) of Japan, and a third one for the second RAEGE VGOS station, located in Santa María (Açores Archipelago, Portugal). The average receiver noise temperatures are 21, 23, and 25 Kelvin and the measured antenna efficiencies are 70%, 75%, and 60% in S-band, X-band, and Ka-band, respectively.

Operation of Current Mirrors in SiGe BiCMOS Technology at Cryogenic Temperatures

2021 ◽  
Vol 68 (4) ◽  
pp. 1439-1445
Author(s):  
Hanbin Ying ◽  
Jeffrey W. Teng ◽  
John D. Cressler
Keyword(s):  
Cryogenic Temperatures ◽  
Current Mirrors ◽  
Bicmos Technology ◽  
Sige Bicmos

scholarly journals Joining of Electrodes to Ultra-Thin Metallic Layers on Ceramic Substrates in Cryogenic Sensors

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4919
Author(s):  
Marcin Lebioda ◽  
Ryszard Pawlak ◽  
Jacek Rymaszewski
Keyword(s):  
Cryogenic Temperatures ◽  
Thermal And Mechanical Properties ◽  
Reflow Soldering ◽  
Ceramic Substrates ◽  
Temperature Range ◽  
Wave Soldering ◽  
Materials Used ◽  
Standard Designs ◽  
Electrical Connections ◽  
Method Show

Microjoining technologies are crucial for producing reliable electrical connections in modern microelectronic and optoelectronic devices, as well as for the assembly of electronic circuits, sensors, and batteries. However, the production of miniature sensors presents particular difficulties, due to their non-standard designs, unique functionality and applications in various environments. One of the main challenges relates to the fact that common methods such as reflow soldering or wave soldering cannot be applied to making joints to the materials used for the sensing layers (oxides, polymers, graphene, metallic layers) or to the thin metallic layers that act as contact pads. This problem applies especially to sensors designed to work at cryogenic temperatures. In this paper, we demonstrate a new method for the dynamic soldering of outer leads in the form of metallic strips made from thin metallic layers on ceramic substrates. These leads can be used as contact pads in sensors working in a wide temperature range. The joints produced using our method show excellent electrical, thermal, and mechanical properties in the temperature range of 15–300 K.

Sign in / Sign up

Export Citation Format

Share Document