Infrared Spectra of Hydroxyl Groups on the Surface of Platinum

1971 ◽  
Vol 49 (20) ◽  
pp. 3409-3410 ◽  
Author(s):  
B. A. Morrow ◽  
P. Ramamurthy

Infrared spectroscopy has been used to show that two types of PtOH species exist on the surface of silica-supported platinum. One of these is produced when O2 is allowed to react with hydrogen covered platinum (ν(OH) = 3497 cm−1) and the other is produced when H2O reacts with a reduced platinum oxide (ν(OH) = 3544 cm−1).

1970 ◽  
Vol 48 (15) ◽  
pp. 2454-2456 ◽  
Author(s):  
B. A. Morrow ◽  
A. Devi

Infrared spectroscopy has been used to show that the surface hydroxyl groups on highly dehydrated silica will exchange with 18O-labeled water. The degree of exchange depends on the sample temperature and is a maximum at about 400 °C, where approximately 65% of the silanol groups contain 18O. The use of the 18O exchange technique for assigning surface-adsorbate stretching modes is illustrated by considering the infrared spectra of BF3 chemisorbed on silica.


2017 ◽  
Vol 37 (7) ◽  
pp. 707-714 ◽  
Author(s):  
Sani A. Samsudin ◽  
Catherine A. Kelly ◽  
Stephen N. Kukureka ◽  
Mike J. Jenkins

Abstract The morphology, dynamic mechanical properties and infrared spectra of polycarbonate (PC)/polypropylene (PP) blends were investigated. As expected, PC and PP were immiscible when blended together; however partial miscibility developed following annealing. The miscibility of one polymer in the other was examined using the modified Fox equation and the values of the Flory-Huggins polymer-polymer interaction parameter (χ12) were also calculated following the Kim and Burns approach. Moreover, the possible causes for partial miscibility in the annealed PC/PP blends were explored by infrared spectroscopy. It was concluded that annealing caused degradation of PP, leading to the formation of polar groups which were then able to interact with PC generating regions of partial miscibility.


1959 ◽  
Vol 37 (10) ◽  
pp. 1718-1721 ◽  
Author(s):  
A. Novak ◽  
E. Whalley

The polymers of n- and iso-butyraldehyde and n-valeraldehyde, which were made by subjecting the aldehydes to pressures of about 8 kb, have been examined by infrared spectroscopy. They are homologues of polyformaldehyde, having the formula HO(CHR•O)nH.


1961 ◽  
Vol 39 (11) ◽  
pp. 2343-2352 ◽  
Author(s):  
Ernest Rivet ◽  
Real Aubin ◽  
Roland Rivest

Co-ordination complexes between diesters of α,ω-dicarboxylic acids and titanium tetrachloride, tin tetrachloride, and zirconium tetrachloride have been prepared. The analytical results, the infrared spectra, the melting points, and the molecular-weight determinations indicate that for the titanium and zirconium complexes, two types of complexes are obtained, one having a general formula MX4•1 diester in which chelate rings from five to nine atoms are formed and the other one, 2MX4•1 diester in which there are two 4-membered rings per complex molecule. With tin tetrachloride only one type of complex is formed, which has two tin tetrachlorides and two diesters per complex molecule.


2004 ◽  
Vol 68 (1) ◽  
pp. 83-100 ◽  
Author(s):  
E. Salvioli-Mariani ◽  
L. Toscani ◽  
D. Bersani

AbstractThe lamproite of Gaussberg is an ultrapotassic rock where leucite, olivine and clinopyroxene microphenocrysts occur in a glass-rich groundmass, containing microliths of leucite, clinopyroxene, apatite, phlogopite and rare K-richterite.Abundant silicate melt inclusions occur in olivine, leucite and, rarely, in clinopyroxene microphenocrysts. Raman investigations on melt inclusions showed the presence of pure CO2 in the shrinkage bubbles. On the other hand, the glass of the groundmass is CO2-poor and contains up to 0.70 wt.% of dissolved H2O, as estimated by infrared spectra. It is inferred that CO2 was released at every stage of evolution of the lamproite magma (CO2-rich shrinkage bubbles), whereas H2O was retained for longer in the liquid. At Gaussberg, CO2 seems to have a major role at relatively high pressure where it favoured the crystallization of H2O-poor microphenocrysts; the uprise of the magma to the surface decreased the solubility of CO2 and caused a relative increase in water activity. As a consequence, phlogopite and K-richterite appeared in the groundmass.The glass composition of both the groundmass and melt inclusions suggests different evolutions for the residual liquids of the investigated samples. Sample G886 shows the typical evolution of a lamproite magma, where the residual liquid evolves toward peralkaline and Na-rich composition and crystallizes K-richterite in the latest stage. Sample G895 derives from mixing/mingling of different batches of magma; effectively glasses from melt inclusions in leucite and clinopyroxene are more alkaline than those found in early crystallized olivine. Leucite and clinopyroxene crystallized early from a relatively more alkaline batch of lamproite magma and, successively, a less alkaline, olivinebearing magma batch assimilated them during its rise to the surface.


2021 ◽  
Author(s):  
Shreyas Patankar ◽  
Ekaterina Vassilenko ◽  
Mathew Watkins ◽  
Anna Posacka ◽  
Peter Ross

<p>Microplastic pollution in oceans is among the global environmental concerns of our time. Emerging research on ocean environments indicates that microfibers, such as those originating from textiles, are some of the most commonly occurring type of microplastic contaminants. While Fourier-transform infrared spectroscopy (FTIR) is commonly used to identify and characterize pollutant samples obtained from the environment, this identification is challenging because infrared spectra of materials can be modified by exposure to the ocean, air, UV light, and other ambient conditions, in a process referred to as “weathering”. We report preliminary efforts in improving FTIR characterization of microplastics by building a library of infrared spectra of common textile fibers weathered under a selection of ambient conditions. Consumer textile materials including polyester, nylon, cotton, and other, were exposed to a selection of ambient conditions: ocean, air, and wastewater treatment stages, in a controlled weathering experiment. Infrared spectra were monitored for up to 52 weeks, with the resulting data illuminating on the environmental fate and longevity of synthetic and natural fibers. Spectral changes caused by weathering were found to depend strongly on both the composition of the material and the specific ambient conditions. This library of weathered material spectra is useful not only in easier identification of environmental microfibers, but also in helping us estimate the duration and manner of weathering that a given environmental microfiber may have experienced.</p>


1996 ◽  
Vol 39 (3-4) ◽  
pp. 197-203 ◽  
Author(s):  
Bernard Coq ◽  
Christian Walter ◽  
Ronald Brown ◽  
Gordon McDougall ◽  
Fran�ois Figu�ras

2017 ◽  
Vol 66 (3) ◽  
pp. 63-74
Author(s):  
Anna Drzewicz ◽  
Marzena Tykarska ◽  
Magdalena Żurowska

The infrared spectra were registered for series of three-ring liquid crystalline esters, differing in the structure of alkyl chain, in the substitution of benzene ring by fluorine atoms and in the type of helicoidal structure in the chiral smectic CA phase with antiferroelectric properties. The influence of molecular structure on the shift of signals coming from carbonyl group, located in the rigid core, was observed. Keywords: liquid crystals, helicoidal structure, chiral smectic CA phase, antiferroelectric crystalline phase, infrared spectroscopy


2021 ◽  
Vol 2103 (1) ◽  
pp. 012052
Author(s):  
D A Chernyshev ◽  
E S Mikhailets ◽  
E A Telnaya ◽  
L V Plotnikova ◽  
A D Garifullin ◽  
...  

Abstract Multiple myeloma (MM) is a serious disease that is difficult to diagnose especially at early stage. Infrared spectroscopy is a promising approach for diagnosing MM. The principal component analysis (PCA) allows us to reduce the dimension of the data and keep only the important variables. In this study, we apply principal components analysis to infrared (IR) spectra of blood serum from healthy donors and multiple myeloma patients. As a result of the analysis by PCA, it was possible to visualize the separation of patient’s and donor’s samples into two clusters. The result indicates that this method is potentially applicable for diagnosis of multiple myeloma.


BioResources ◽  
2020 ◽  
Vol 16 (1) ◽  
pp. 1063-1075
Author(s):  
Abiodun A. Amusa ◽  
Abdul L. Ahmad ◽  
Jimoh K. Adewole

Lignocellulosic biomass was delignified by combining physical and chemical pretreatment techniques. Then, a polysulfone-polyethylene glycol blend, which was compatible with the lignin-free biomass (0 wt% to 3.0 wt%), was used to fabricate composite membranes. The presence of hydroxyl groups after the pretreatment was evaluated via Fourier transform infrared spectroscopy. The rheology of the polymer solutions was assessed via the viscometric method. Also, the hydrophobicity of the fabricated membranes was determined using contact angle and porosity measurements. The fabricated membranes with near superhydrophobic properties (a contact angle of approximately 140°) based on this study revealed that contactor systems and biomedical applications would benefit from this modification.


Sign in / Sign up

Export Citation Format

Share Document