STEADY STATE SYMMETRY BREAKING IN PERIODICALLY EXCITED SYSTEMS INVOLVING TIME DELAY BY HARMONIC HOMOTOPY

2013 ◽  
Vol 23 (05) ◽  
pp. 1350091
Author(s):  
A. Y. T. LEUNG ◽  
ZHONGJIN GUO

Symmetry breaking is a ubiquitous and important phenomenon arising in a wide range of physical systems. We propose the use of the harmonic balance in combination with homotopy continuation to investigate symmetry breaking occurrence in the periodically excited systems involving time delay. Two numerical examples are given to show the details. When the Hopfield neural network is subject to external excitation, we investigate the relation of the magnitude of excitation versus the amplitude of the bias term and analyze the effect of time delay on the steady state response. The second example concerns the delayed feedback control of a nonlinear beam subject to moving load. The relationship of the position feedback gain, external excitation frequency and time delay versus the amplitudes of steady state responses are studied analytically. The symmetry breaking points are accurately predicted. In addition, the Runge–Kutta numerical simulation results are used to cross-check the efficiency and accuracy.

2016 ◽  
Vol 23 (18) ◽  
pp. 2989-3006 ◽  
Author(s):  
Wlodzimierz Czyczula ◽  
Piotr Koziol ◽  
Dariusz Kudla ◽  
Sergiusz Lisowski

In the literature, typical analytical track response models are composed of beams (which represent the rail) on viscoelastic or elastic foundations. The load is usually considered as a single concentrated force (constant or varying in time) moving with constant speed. Concentrated or distributed loads or multilayer track models have rarely been considered. One can find some interesting results concerning analysis of distributed loads and multilayer track structures that include both analytical and numerical approaches. However, there is a noticeable lack of sufficient comparison between track responses under concentrated or distributed load and between one and multilayer track models. One of the unique features of the present paper is a comparison of data obtained for a series of concentrated and distributed loads, which takes into account a wide range of track parameters and train speeds. One of the fundamental questions associated with the multilayer track model is the level of coupling between the rail and the vibrations of the sleepers. In this paper, it is proved that sleepers are weakly coupled with the rail if the track is without significant imperfections, and the steady-state response is analyzed for this case. In other words, sleeper vibrations do not influence the rail vibrations significantly. Therefore the track is analyzed by means of a two-stage model. The first step of this model determines rail vibration under a moving load, and then the sleeper vibration is calculated from previously obtained kinematic excitation. The model is verified by comparison of the obtained results with experimental data. Techniques based on Fourier series are applied to the solution of the steady-state track response. Another important problem associated with track response under moving loads arises from the analysis of the effect of longitudinal forces in rails on vertical displacement. It is shown that, in the case of the steady-state response, longitudinal forces do not influence rail displacements significantly and this observation remains correct for a wide range of track parameters and train speeds. The paper also analyzes the legitimacy of the statement that additional rail deflection between sleepers, compared to the continuous rail support, can be considered as a track imperfection.


1973 ◽  
Vol 40 (4) ◽  
pp. 1040-1044 ◽  
Author(s):  
T. M. Mulcahy

The steady-state responses to a point load moving with constant velocity on an elastic beam which rests on two types of idealized strain-hardening foundations are considered. The one-dimensional elastic-rigid foundation problem is shown to be equivalent to an elastic foundation with two traveling point loads. The opposing loads produce deflections which remain bounded for all load velocities and less than the corresponding elastic foundation results. The deflections of a one-dimensional elastic-perfectly plastic foundation are shown to be bounded for all load velocities. However, deflections significantly larger than the corresponding elastic foundation results occur over a wide range of velocities which are less than the elastic foundation critical velocity.


2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Dongmei Huang ◽  
Wei Li ◽  
Guidong Yang ◽  
Meijuan He ◽  
Hong Dang

The principal resonance of a delayed piecewise-smooth (DPWS) system with negative stiffness under narrow-band random excitation is investigated in aspects of multiscale analysis, design methodology of the controller, and response properties. The amplitude-frequency response and steady-state moments together with the corresponding stability conditions of the controlled stochastic system are derived, in which the degradation case is also under consideration. Then, from the perspective of the equivalent damping, the comparisons of the response characteristics of the controlled system to the uncontrolled system, such as the phenomenon of frequency island, are fulfilled. Furthermore, sensitivity of the system response to feedback gain and time delay is studied and interesting dynamic properties are found. Meanwhile, the classification of the steady-state solution is also discussed. To control the maximum amplitude, the feedback parameters are determined by the frequency response together with stability boundaries which must be utilized to exclude the combinations of the unstable parameters. For the case with small noise intensity, mean-square responses present the similar characteristics to what is discussed in the deterministic case.


2019 ◽  
Vol 26 (6) ◽  
pp. 435-448
Author(s):  
Priyanka Biswas ◽  
Dillip K. Sahu ◽  
Kalyanasis Sahu ◽  
Rajat Banerjee

Background: Aminoacyl-tRNA synthetases play an important role in catalyzing the first step in protein synthesis by attaching the appropriate amino acid to its cognate tRNA which then transported to the growing polypeptide chain. Asparaginyl-tRNA Synthetase (AsnRS) from Brugia malayi, Leishmania major, Thermus thermophilus, Trypanosoma brucei have been shown to play an important role in survival and pathogenesis. Entamoeba histolytica (Ehis) is an anaerobic eukaryotic pathogen that infects the large intestines of humans. It is a major cause of dysentery and has the potential to cause life-threatening abscesses in the liver and other organs making it the second leading cause of parasitic death after malaria. Ehis-AsnRS has not been studied in detail, except the crystal structure determined at 3 Å resolution showing that it is primarily α-helical and dimeric. It is a homodimer, with each 52 kDa monomer consisting of 451 amino acids. It has a relatively short N-terminal as compared to its human and yeast counterparts. Objective: Our study focusses to understand certain structural characteristics of Ehis-AsnRS using biophysical tools to decipher the thermodynamics of unfolding and its binding properties. Methods: Ehis-AsnRS was cloned and expressed in E. coli BL21DE3 cells. Protein purification was performed using Ni-NTA affinity chromatography, following which the protein was used for biophysical studies. Various techniques such as steady-state fluorescence, quenching, circular dichroism, differential scanning fluorimetry, isothermal calorimetry and fluorescence lifetime studies were employed for the conformational characterization of Ehis-AsnRS. Protein concentration for far-UV and near-UV circular dichroism experiments was 8 µM and 20 µM respectively, while 4 µM protein was used for the rest of the experiments. Results: The present study revealed that Ehis-AsnRS undergoes unfolding when subjected to increasing concentration of GdnHCl and the process is reversible. With increasing temperature, it retains its structural compactness up to 45ºC before it unfolds. Steady-state fluorescence, circular dichroism and hydrophobic dye binding experiments cumulatively suggest that Ehis-AsnRS undergoes a two-state transition during unfolding. Shifting of the transition mid-point with increasing protein concentration further illustrate that dissociation and unfolding processes are coupled indicating the absence of any detectable folded monomer. Conclusion: This article indicates that GdnHCl induced denaturation of Ehis-AsnRS is a two – state process and does not involve any intermediate; unfolding occurs directly from native dimer to unfolded monomer. The solvent exposure of the tryptophan residues is biphasic, indicating selective quenching. Ehis-AsnRS also exhibits a structural as well as functional stability over a wide range of pH.


Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3854
Author(s):  
Salvatore Musumeci ◽  
Luigi Solimene ◽  
Carlo Stefano Ragusa

In this paper, we propose a method for the identification of the differential inductance of saturable ferrite inductors adopted in DC–DC converters, considering the influence of the operating temperature. The inductor temperature rise is caused mainly by its losses, neglecting the heating contribution by the other components forming the converter layout. When the ohmic losses caused by the average current represent the principal portion of the inductor power losses, the steady-state temperature of the component can be related to the average current value. Under this assumption, usual for saturable inductors in DC–DC converters, the presented experimental setup and characterization method allow identifying a DC thermal steady-state differential inductance profile of a ferrite inductor. The curve is obtained from experimental measurements of the inductor voltage and current waveforms, at different average current values, that lead the component to operate from the linear region of the magnetization curve up to the saturation. The obtained inductance profile can be adopted to simulate the current waveform of a saturable inductor in a DC–DC converter, providing accurate results under a wide range of switching frequency, input voltage, duty cycle, and output current values.


2020 ◽  
Vol 2020 (12) ◽  
Author(s):  
Federico Carta ◽  
Nicole Righi ◽  
Yvette Welling ◽  
Alexander Westphal

Abstract We present a mechanism for realizing hybrid inflation using two axion fields with a purely non-perturbatively generated scalar potential. The structure of the scalar potential is highly constrained by the discrete shift symmetries of the axions. We show that harmonic hybrid inflation generates observationally viable slow-roll inflation for a wide range of initial conditions. This is possible while accommodating certain UV arguments favoring constraints f ≲ MP and ∆ϕ60 ≲ MP on the axion periodicity and slow-roll field range, respectively. We discuss controlled ℤ2-symmetry breaking of the adjacent axion vacua as a means of avoiding cosmological domain wall problems. Including a minimal form of ℤ2-symmetry breaking into the minimally tuned setup leads to a prediction of primordial tensor modes with the tensor-to-scalar ratio in the range 10−4 ≲ r ≲ 0.01, directly accessible to upcoming CMB observations. Finally, we outline several avenues towards realizing harmonic hybrid inflation in type IIB string theory.


2021 ◽  
Vol 42 (5) ◽  
pp. 641-648
Author(s):  
Shichao Ma ◽  
Xin Ning ◽  
Liang Wang ◽  
Wantao Jia ◽  
Wei Xu

AbstractIt is well-known that practical vibro-impact systems are often influenced by random perturbations and external excitation forces, making it challenging to carry out the research of this category of complex systems with non-smooth characteristics. To address this problem, by adequately utilizing the stochastic response analysis approach and performing the stochastic response for the considered non-smooth system with the external excitation force and white noise excitation, a modified conducting process has proposed. Taking the multiple nonlinear parameters, the non-smooth parameters, and the external excitation frequency into consideration, the steady-state stochastic P-bifurcation phenomena of an elastic impact oscillator are discussed. It can be found that the system parameters can make the system stability topology change. The effectiveness of the proposed method is verified and demonstrated by the Monte Carlo (MC) simulation. Consequently, the conclusions show that the process can be applied to stochastic non-autonomous and non-smooth systems.


Author(s):  
Yan Chen ◽  
Ward Whitt

In order to understand queueing performance given only partial information about the model, we propose determining intervals of likely values of performance measures given that limited information. We illustrate this approach for the mean steady-state waiting time in the $GI/GI/K$ queue. We start by specifying the first two moments of the interarrival-time and service-time distributions, and then consider additional information about these underlying distributions, in particular, a third moment and a Laplace transform value. As a theoretical basis, we apply extremal models yielding tight upper and lower bounds on the asymptotic decay rate of the steady-state waiting-time tail probability. We illustrate by constructing the theoretically justified intervals of values for the decay rate and the associated heuristically determined interval of values for the mean waiting times. Without extra information, the extremal models involve two-point distributions, which yield a wide range for the mean. Adding constraints on the third moment and a transform value produces three-point extremal distributions, which significantly reduce the range, producing practical levels of accuracy.


Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Feifan Zhang ◽  
Wenjiao Zhou ◽  
Lei Yao ◽  
Xuanwen Wu ◽  
Huayong Zhang

In this research, a continuous nutrient-phytoplankton model with time delay and Michaelis–Menten functional response is discretized to a spatiotemporal discrete model. Around the homogeneous steady state of the discrete model, Neimark–Sacker bifurcation and Turing bifurcation analysis are investigated. Based on the bifurcation analysis, numerical simulations are carried out on the formation of spatiotemporal patterns. Simulation results show that the diffusion of phytoplankton and nutrients can induce the formation of Turing-like patterns, while time delay can also induce the formation of cloud-like pattern by Neimark–Sacker bifurcation. Compared with the results generated by the continuous model, more types of patterns are obtained and are compared with real observed patterns.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Tatiana I. Becker ◽  
Yuriy L. Raikher ◽  
Oleg V. Stolbov ◽  
Valter Böhm ◽  
Klaus Zimmermann

Abstract Magnetoactive elastomers (MAEs) are a special type of smart materials consisting of an elastic matrix with embedded microsized particles that are made of ferromagnetic materials with high or low coercivity. Due to their composition, such elastomers possess unique magnetic field-dependent material properties. The present paper compiles the results of investigations on MAEs towards an approach of their potential application as vibrating sensor elements with adaptable sensitivity. Starting with the model-based and experimental studies of the free vibrational behavior displayed by cantilevers made of MAEs, it is shown that the first bending eigenfrequency of the cantilevers depends strongly on the strength of an applied uniform magnetic field. The investigations of the forced vibration response of MAE beams subjected to in-plane kinematic excitation confirm the possibility of active magnetic control of the amplitude-frequency characteristics. With change of the uniform field strength, the MAE beam reveals different steady-state responses for the same excitation, and the resonance may occur at various ranges of the excitation frequency. Nonlinear dependencies of the amplification ratio on the excitation frequency are obtained for different magnitudes of the applied field. Furthermore, it is shown that the steady-state vibrations of MAE beams can be detected based on the magnetic field distortion. The field difference, which is measured simultaneously on the sides of a vibrating MAE beam, provides a signal with the same frequency as the excitation and an amplitude proportional to the amplitude of resulting vibrations. The presented prototype of the MAE-based vibrating unit with the field-controlled “configuration” can be implemented for realization of acceleration sensor systems with adaptable sensitivity. The ongoing research on MAEs is oriented to the use of other geometrical forms along with beams, e.g. two-dimensional structures such as membranes.


Sign in / Sign up

Export Citation Format

Share Document