The Influence of Road Bumps Characteristics on the Chaotic Vibration of a Nonlinear Full-Vehicle Model with Driver

2016 ◽  
Vol 26 (09) ◽  
pp. 1650151 ◽  
Author(s):  
J. Fakhraei ◽  
H. M. Khanlo ◽  
M. Ghayour ◽  
Kh. Faramarzi
Keyword(s):  
Nonlinear Vibration ◽  
Ride Comfort ◽  
Chaotic Behavior ◽  
Speed Control ◽  
Vehicle Body ◽  
The Road ◽  
Chaotic Vibrations ◽  
Vehicle System ◽  
Road Speed ◽  
The Relationship

In this paper, the chaotic behavior of a ground vehicle system with driver subjected to road disturbances is studied and the relationship between the nonlinear vibration of the vehicle and ride comfort is evaluated. The vehicle system is modeled as fully nonlinear with seven degrees of freedom and an additional degree of freedom for driver (8-DOF). The excitation force is the road irregularities that are assumed as road speed control bumps. The sinusoidal, consecutive half-sine and dented-rectangular waveforms are considered to simulate the road speed control bumps. The nonlinearities of the system are due to the nonlinear springs and dampers that are used in the suspension system and tires. The governing differential equations are extracted under Newton–Euler laws and solved via numerical methods. The chaotic behaviors were studied in more detail with special techniques such as bifurcation diagrams, phase plane portrait, Poincaré map and Lyapunov exponents. The ride comfort was evaluated as the RMS value of the vertical displacement of the vehicle body and driver. Firstly, the effect of amplitude (height) and frequency (vehicle’s speed) of these speed control bumps on chaotic vibrations of vehicle are studied. The obtained results show that various forms of vibrations, such as periodic, subharmonic and chaotic vibrations, can be detected in the system behavior with the change of the height and frequency of speed control bumps and present different types of strange attractors in the vehicle with and without driver. Then, the influence of nonlinear vibration on ride comfort and the relationship between chaotic vibrations of the vehicle and driving comfort are investigated. The results of analyzing the RMS diagrams reveal that the chaotic behaviors can directly affect the driving comfort and lead to the driver’s comfort being reduced. The obtained results can be used in the design of vehicle and road bumps pavement.

scholarly journals Mathematical Modelling of Two-Wheeler Suspension system in a wavy road

2019 ◽  
Vol 8 (11) ◽  
pp. 3630-3635
Keyword(s):  
Ride Comfort ◽  
Health Hazard ◽  
Suspension System ◽  
Vehicle Body ◽  
Continuous Exposure ◽  
Potential Health ◽  
Suspension Spring ◽  
The Road ◽  
Potential Health Hazard ◽  
Two Wheeler

Two wheelers like motorbikes and scooters are one of the major transports in India. In major cities and towns, it is most common private transport as it is fast and easy approach to the destination. But the prolonged drive in the two-wheeler leads to the potential health hazard and musco-skeletal disorder due to continuous exposure to the vibration caused during the ride and force transmitted to the vehicle body due to road irregularities. It is a challenge of automobile engineers to design a promising suspension system to overcome the risk of ride comfort during continuous driving. In this research, two-wheeler suspension system is modelled with a condition of bump and valley in a wavy road. The road surface is assumed to be wavy and the response of new suspension spring with different materials (stainless steel, tungsten and polymeric) along with viscous damper is analyzed and compared. By this analysis, it will be proposed to industry to modify the suspension system to improve its efficiency and reduce force transmitted to the human body to improve the ride comfort

scholarly journals Simulation of Pavement Random Excitation Based on Harmonic Superposition Method

2021 ◽  
Vol 2 (3) ◽  
Author(s):  
Kehui Ma ◽  
Yongguo Zhang ◽  
Xü Zhen
Keyword(s):  
Spectral Density ◽  
Power Spectral Density ◽  
Ride Comfort ◽  
Random Excitation ◽  
Superposition Method ◽  
Generation Model ◽  
The Road ◽  
Power Spectral ◽  
Control Research ◽  
The Relationship

The road input model is very important in the analysis of vehicle ride comfort and handling stability. Based on the analysis of the relationship between the spatial frequency power spectral density and the time power spectral density of the road, the road signal generation model is established. The simulation is carried out under different vehicle speeds, and the B and C-level random road time excitation signals are generated. The power spectral density is used to compare the simulation results of the model with the road classification standard. The experimental results show that the results are accurate and can provide reliable excitation signals for vehicle control research.

scholarly journals Vibration Control of Semi-Active Suspension System using Modified Skyhook with Advanced Firefly Algorithm

2021 ◽  
Vol 2129 (1) ◽  
pp. 012014
Author(s):  
M H Ab Talib ◽  
I Z Mat Darus ◽  
H M Yatim ◽  
M S Hadi ◽  
N M R Shaharuddin ◽  
...  
Keyword(s):  
Firefly Algorithm ◽  
Ride Comfort ◽  
Active Suspension ◽  
The Body ◽  
Matlab Simulation ◽  
The Road ◽  
Vehicle System ◽  
Road Profile ◽  
Control Scheme ◽  
Suspension Control

Abstract The semi-active suspension (SAS) system is a partial suspension device used in the vehicle system to improve the ride comfort and road handling. Due to the high non-linearity of the road profile disturbances plus uncertainties derived from vehicle dynamics, a conventional Skyhook controller is not deemed enough for the vehicle system to improve the performance. A major problem of the implementation of the controller is to optimize a proper parameter as this is an important element in demanding a good controller response. An advanced Firefly Algorithm (AFA) integrated with the modified skyhook (MSky) is proposed to enhance the robustness of the system and thus able to improve the vehicle ride comfort. In this paper, the controller scheme to be known as MSky-AFA was validated via MATLAB simulation environment. A different optimizer based on the original firefly algorithm (FA) is also studied in order to compute the parameter of the MSky controller. This control scheme to be known as MSky-FA was evaluated and compared to the proposed MSky-AFA as well as the passive suspension control. The results clearly exhibit more superior and better response of the MSky-AFA in reducing the body acceleration and displacement amplitude in comparison to the MSky-FA and passive counterparts for a sinusoidal road profile condition.

Improvement of Ride Comfort with Active Suspension System Using Preview Control Law

1995 ◽  
Vol 7 (4) ◽  
pp. 307-311
Author(s):  
Hideo Tobata ◽  
◽  
Takeshi Kimura ◽  
Yohsuke Akatsu
Keyword(s):  
Ride Comfort ◽  
Vertical Motion ◽  
Active Suspension ◽  
Road Surface ◽  
Vehicle Body ◽  
Vertical Acceleration ◽  
Control Force ◽  
Preview Control ◽  
Rear Suspension ◽  
The Road

It is known that the ride comfort of a vehicle equipped with active suspension can be further improved if a priori information about the road surface, i.e., preview control, is used. This paper discusses the application of preview control to the rear wheels of a vehicle with active suspension. Information about the front wheels' vertical motion is used to estimate the vertical travel of the rear wheels. Vibration transmitted from the road surface to the vehicle body through the rear suspension can be estimated from the vertical motion of the wheels. Thus, the control force that should be generated by the rear suspension actuators can be obtained. Simulation results reveal that preview control provides an accurate estimate of road force inputs, enabling the vertical acceleration of the vehicle body to be reduced for further improvement in ride comfort. The results of vehicle driving tests also confirm that the preview-control force serves to reduce the vertical acceleration of the vehicle body. Cooperation between preview control and a skyhook damper is also discussed and shown to be effective in reducing vehicle body vibration.

Body attitude control strategy based on road level for heavy rescue vehicles

2020 ◽  
pp. 095440702096616
Author(s):  
Hao Chen ◽  
Mingde Gong ◽  
Dingxuan Zhao ◽  
Jianxu Zhu
Keyword(s):  
Control Strategy ◽  
Attitude Control ◽  
Ride Comfort ◽  
Active Suspension ◽  
Suspension System ◽  
Vehicle Body ◽  
Vertical Acceleration ◽  
Inference System ◽  
The Road ◽  
Body Attitude

This paper proposes an attitude control strategy based on road level for heavy rescue vehicles. The strategy aims to address the problem of poor ride comfort and stability of heavy rescue vehicles in complex road conditions. Firstly, with the pressure of the suspension hydraulic cylinder chamber without a piston rod as the parameter, Takagi–Sugeno fuzzy controller classification and adaptive network-based fuzzy inference system controller classification are used to recognise the road level. Secondly, particle swarm optimisation is adopted to obtain the optimal parameters of the active suspension system of vehicle body attitude control under different road levels. Lastly, the parameters of the active suspension system are selected in accordance with the road level recognised in the driving process to improve the adaptive adjustment capability of the active suspension system at different road levels. Test results show that the root mean square values of vertical acceleration, pitch angle and roll angle of the vehicle body are reduced by 59.9%, 76.2% and 68.4%, respectively. This reduction improves the ride comfort and stability of heavy rescue vehicles in complex road conditions.

Research on Optimal Control and Simulation for Active Suspension Systems

2013 ◽  
Vol 340 ◽  
pp. 631-635
Author(s):  
Yong Fa Qin ◽  
Jie Hua ◽  
Long Wei Geng
Keyword(s):  
Optimal Control ◽  
Ride Comfort ◽  
Mathematic Model ◽  
Active Suspension ◽  
Suspension System ◽  
Vehicle Body ◽  
Vertical Acceleration ◽  
The Road ◽  
Suspension Systems ◽  
Active Suspension Systems

Vehicles with active suspension systems become more ride comfort and maneuverable stability, many types of active suspensions have been applied to passenger vehicles, but one of the shortcomings of an active susupension system is that the additional control power consumption is needed. The core issues of designing an active suspension system are to minimiaze vibration magnitute and control energy comsuption of the active suspension system. A new mathematic model for an active suspension system is established based on vehicle dynamics and modern control theory. An optimal control law is constructed through solving the Riccati equation, and then the transfer function is deduced to describe the relationship between the vetical velosity of the road roughness and the output of suspension system. Three typical parameters of vehicle ride comfort are researched, such as vertical acceleration of vehicle body, dynamic deflection of suspension system and dynamic deformation of tires. A case of a quarter vehicle model is studied by simulation to show that the proposed method of modeling and designing optimal controller are suitable to develop active suspension systems.

scholarly journals Experimental attenuation and evaluation of whole body vibration for an off-road vehicle with magnetorheological dampers

2018 ◽  
Vol 38 (2) ◽  
pp. 852-870 ◽  
Author(s):  
Piotr Krauze ◽  
Jerzy Kasprzyk ◽  
Jaroslaw Rzepecki
Keyword(s):  
Ride Comfort ◽  
Health And Safety ◽  
Harmonic Excitation ◽  
Magnetorheological Damper ◽  
Vehicle Body ◽  
Whole Body ◽  
Magnetorheological Dampers ◽  
Passive Suspension ◽  
The Road ◽  
Damper Control

The paper presents an analysis of vehicle vibration, ride comfort and handling which have a decisive influence on health and safety of a driver. Experiments were carried out for a commercially available experimental all-terrain vehicle in the field in hard conditions with retaining the sufficient repeatability. The vehicle is equipped with a complex vibration control system, taking advantage of four automotive magnetorheological dampers. Numerous sensors, which measure acceleration in four points of the vehicle body, near the driver’s seat, feet and hands, body orientation in space and speed of vehicle wheels, are available in the vehicle. They were used for evaluation of magnetorheological dampers’ control signals and analysis of vibration affecting the driver. Constant values of magnetorheological damper control current were used for emulation of different settings of passive suspension. The analysis performed in frequency domain showed how vibration propagates in a medium-sized all-terrain vehicle and indicated that driver’s hands are mostly affected by the road-induced vibration. It was also confirmed that the greatest improvement of ride comfort can be obtained for the soft suspension, i.e. uncontrolled magnetorheological dampers. Furthermore, the Skyhook algorithm was implemented, including the proportional control of the magnetorheological damper force and the inverse Tanh model of the magnetorheological damper. It was validated for the wideband road-induced excitation contrary to the experiments commonly presented in the literature, which are performed only for harmonic excitation. It was shown that the properly tuned Skyhook algorithm enables improving vehicle handling compared to the passive suspension and simultaneously it can maintain the similar or even better results of ride comfort.

Wheelbase preview control of an active suspension with a disturbance-decoupled observer to improve vehicle ride comfort

2019 ◽  
Vol 234 (6) ◽  
pp. 1725-1745
Author(s):  
Baek-soon Kwon ◽  
Daejun Kang ◽  
Kyongsu Yi
Keyword(s):  
Simulation Study ◽  
Control Algorithm ◽  
Ride Comfort ◽  
Active Suspension ◽  
The Body ◽  
Vehicle Body ◽  
Preview Control ◽  
The Road ◽  
Road Disturbance ◽  
Suspension Control

This article deals with the design of a partial preview active suspension control algorithm for the improvement of vehicle ride comfort. Generally, while preview-controlled active suspension systems have even greater potential than feedback-controlled systems, their main challenge is obtaining preview information of the road profile ahead. A critical drawback of the “look-ahead” sensors is an increased risk of incorrect detection influenced by water, snow, and other soft obstacles on the road. In this work, a feasible wheelbase preview suspension control algorithm without information about the road elevation has been developed based on a novel 3-degree-of-freedom full-car dynamic model which incorporates only the vehicle body dynamics. The main advantage of the employed vehicle model is that the system disturbance input vector consists of vertical wheel accelerations that can be measured easily. The measured acceleration information of the front wheels is used for predictive control of the rear suspension to stabilize the body motion. The suspension state estimator has also been designed to completely remove the effect of unknown road disturbance on the state estimation error. The estimation performance of an observer is verified via a simulation study and field tests. The performance of the proposed suspension controller is evaluated on a frequency domain and time domain via a simulation study. It is shown that the vehicle ride comfort can be improved more by the proposed wheelbase preview control approach than by the feedback approach.

scholarly journals Robust H-infinity Controller in a MRF Engine Mount for Improving the Vehicle Ride Comfort

2020 ◽  
Vol 25 (2) ◽  
pp. 219-225
Author(s):  
Seyed Salman Hosseini ◽  
Javad Marzbanrad
Keyword(s):  
Ride Comfort ◽  
Vehicle Body ◽  
Maximum Magnitude ◽  
Robust Controller ◽  
H Infinity ◽  
The Road ◽  
Engine Vibration ◽  
Road Roughness ◽  
Comparison Results ◽  
Engine Mount

In this paper, a robust controller is designed with the help of a Magnetorheological fluid (MRF) for a semi-active engine mount. To do so, an 8-DOF vehicle model is chosen in which the road roughness and engine vibration are the disturbance inputs to the system and the mass of the vehicle is taken into accounts as an uncertainty. In addition, the maximum magnitude and frequency of the force applied to the vehicle body by the actuators are limited in the ranges of 0~1500N and 0~10Hz, respectively. To validate such a design, the proposed controller is compared with a PID controller. The comparison results show that the proposed controller has a good performance while dealing with uncertainties such a way that using it leads to transmitting the engine vibration frequency less than 6%. It is also shown that the vibrations due to disturbances entering the system are effectively reduced in the system including the proposed controller.

scholarly journals The Road More Travelled: The Differential Effects of Spatial Experience in Young and Elderly Participants

2021 ◽  
Vol 18 (2) ◽  
pp. 709
Author(s):  
Antonella Lopez ◽  
Alessandro Germani ◽  
Luigi Tinella ◽  
Alessandro Oronzo Caffò ◽  
Albert Postma ◽  
...  
Keyword(s):  
Mental Representations ◽  
Spatial Relations ◽  
The Elderly ◽  
The Road ◽  
Socio Demographic Factors ◽  
Effects Of Aging ◽  
Coordinate Spatial Relations ◽  
Categorical Spatial Relations ◽  
The Relationship

Our spatial mental representations allow us to give refined descriptions of the environment in terms of the relative locations and distances between objects and landmarks. In this study, we investigated the effects of familiarity with the everyday environment, in terms of frequency of exploration and mode of transportation, on categorical and coordinate spatial relations, on young and elderly participants, controlling for socio-demographic factors. Participants were tested with a general anamnesis, a neuropsychological assessment, measures of explorations and the Landmark Positioning on a Map task. The results showed: (a) a modest difference in performance with categorical spatial relations; (b) a larger difference in coordinate spatial relations; (c) a significant moderating effect of age on the relationship between familiarity and spatial relations, with a stronger relation among the elderly than the young. Ceteris paribus, the role of direct experience with exploring their hometown on spatial mental representations appeared to be more important in the elderly than in the young. This advantage appears to make the elderly wiser and likely protects them from the detrimental effects of aging on spatial mental representations.

Sign in / Sign up

Export Citation Format

Share Document