scholarly journals High-Density Polyethylene Composites Filled with Nanosilica Containing Immobilized Nanosilver or Nanocopper: Thermal, Mechanical, and Bactericidal Properties and Morphology and Interphase Characterization

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Regina Jeziórska ◽  
Maria Zielecka ◽  
Beata Gutarowska ◽  
Zofia Żakowska
Keyword(s):  
High Density Polyethylene ◽  
Interfacial Adhesion ◽  
Crystallization Behavior ◽  
High Density ◽  
Melt Blending ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
Bactericidal Properties ◽  
Excellent Activity ◽  
Thermal Stability Of

Silica containing immobilized nanosilver (Ag-SiO2) or nanocopper (Cu-SiO2) was used as a filler for high-density polyethylene (HDPE). The HDPE/Ag-SiO2and HDPE/Cu-SiO2composites were prepared by melt blending and injection molding. The microstructure of the composites was examined using transmission electron microscopy (TEM). The crystallization behavior and thermal properties were studied using differential scanning calorimetry (DSC) and thermogravimetry (TGA). The mechanical properties were characterized by tensile, flexural, and impact tests as well as dynamic mechanical thermal analysis (DMTA). The ability of silica to give antimicrobial activity to HDPE was also investigated and discussed. The TEM images indicate that Ag-SiO2show lower degree of agglomeration than Cu-SiO2nanoparticles. The crystallization temperature increased, whereas crystallinity decreased in the composites. The thermal stability of the composites was significantly better compared to HDPE. Improved stiffness indicating very good interfacial adhesion was observed. Excellent activity against different kinds of bacteria was found.

Performance characteristics of polyethylene/old corrugated container composites reinforced with carbon nanotubes

2016 ◽  
Vol 51 (18) ◽  
pp. 2665-2673 ◽  
Author(s):  
Behzad Kord ◽  
Mehdi Roohani
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
High Density Polyethylene ◽  
Analysis Data ◽  
High Density ◽  
Scanning Calorimetry ◽  
Polyethylene Matrix ◽  
Melt Compounding ◽  
The Impact ◽  
Thermal Stability Of

The physical, mechanical, thermal, and flammability properties of high-density polyethylene/old corrugated container composites reinforced with carbon nanotubes are presented in this study. High-density polyethylene/old corrugated container composites with different loadings of carbon nanotube (0, 1, 3, and 5 phc) were prepared by melt compounding followed by injection molding. Results indicated that the incorporation of carbon nanotube into high-density polyethylene, significantly improved the mechanical properties of the composites. The tensile and flexural properties achieved the maximum values when 3 phc carbon nanotube was added. Meanwhile, the impact strength of the composites progressively decreased with increasing carbon nanotube content. Furthermore, the water absorption and thickness swelling of the samples remarkably reduced with the addition of carbon nanotube. From thermogravimetric analysis data, the presence of carbon nanotube could enhance the thermal stability of the composites, especially the maximum weight loss rate temperature and also the better char residual was obtained at high loading level of carbon nanotube. Simultaneous differential scanning calorimetry thermograms revealed that the thermal degradation temperatures for the samples with carbon nanotube were much higher than those made without carbon nanotube. Moreover, it was found that the addition of carbon nanotube results in a significant enhancement in flame retardancy of the composites. Morphological observations showed that the nanoparticles were predominantly dispersed uniformly within the high-density polyethylene matrix.

Mechanical and morphological properties of high density polyethylene and polylactide blends

2014 ◽  
Vol 34 (9) ◽  
pp. 813-821 ◽  
Author(s):  
Gaurav Madhu ◽  
Haripada Bhunia ◽  
Pramod K. Bajpai ◽  
Veena Chaudhary
Keyword(s):  
High Density Polyethylene ◽  
High Density ◽  
Morphological Properties ◽  
Heat Of Fusion ◽  
Melt Blending ◽  
Scanning Calorimetry ◽  
Elongation At Break ◽  
Blown Film ◽  
Blending Method ◽  
Spectroscopy Studies

Abstract Polyblend films were prepared from high-density polyethylene (HDPE) and poly(l-lactic acid) (PLLA) up to 20% PLLA by the melt blending method in an extrusion mixer with post-extrusion blown film attachment. The 80/20 (HDPE/PLLA) blend was compatibilized with maleic anhydride grafted polyethylene (PE-g-MA) in varying ratios [up to 8 parts per hundred of resin (phr)]. Tensile properties of the films were evaluated to obtain optimized composition for packaging applications of both non-compatibilized and compatibilized blends. The compositions HDPE80 (80% HDPE and 20% PLLA) and HD80C4 (80% HDPE, 20% PLLA and 4 phr compatibilizer) were found to be optimum for packaging applications. However, better tensile strength (at yield) and elongation (at break) of 80/20 (HDPE/PLLA) blend were noticed in the presence of PE-g-MA. Further, thermal properties and morphologies of these blends were evaluated. Differential scanning calorimetry (DSC) study revealed that blending does not much affect the crystalline melting point of HDPE and PLLA, but heat of fusion of 80/20 (HDPE/PLLA) blend was decreased as compared to that of neat HDPE. Spectroscopy studies showed evidence of the introduction of some new groups in the blends and gaining compatibility in the presence of PE-g-MA. The compatibilizer influenced the morphology of the blends, as apparent from scanning electron microscopy (SEM) and supported by Fourier transform infrared (FTIR).

Crystallization Behavior of Sputter Deposited Amorphous NixZr100-x, Films

1990 ◽  
Vol 205 ◽  
Author(s):  
Gillian E. Winters ◽  
K.M. Unruh ◽  
C.P. Swann
Keyword(s):  
Crystallization Behavior ◽  
Rutherford Backscattering Spectrometry ◽  
Nominal Composition ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
Sputter Deposited ◽  
Substrate Temperatures ◽  
Deposited Films ◽  
Thermal Stability Of ◽  
Continuous Range

AbstractSputter deposited films of amorphous NixZr100-x, have been prepared over a wide and continuous range of compositions between x=20 and x=90 atomic percent Ni on liquid nitrogen cooled and room temperature substrates. These films have been characterized by xray and electron diffraction, transmission electron microscopy, and Rutherford backscattering spectrometry. The crystallization behavior of these films has been systematically studied by differential scanning calorimetry and compared with earlier measurements on amorphous liquid quenched alloys. Systematic differences were found between the thermal stability of amorphous alloys of the same nominal composition prepared at different substrate temperatures. Larger differences exist between vapor deposited amorphous films and liquid quenched ribbons.

Preparation and Characterization of Polymer/Multi-Walled Carbon Nanotube Nanocomposites

2008 ◽  
Vol 140 ◽  
pp. 97-102 ◽  
Author(s):  
M. Sarah Mohlala ◽  
Suprakas Sinha Ray
Keyword(s):  
Gravimetric Analysis ◽  
Melt Blending ◽  
Thermal Gravimetric ◽  
Scanning Calorimetry ◽  
Multiwalled Carbon ◽  
Nanostructured Composite ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotube ◽  
Thermal Stability Of

This paper describes the preparation, characterization and properties of nanostructured composite materials based on poly(butylene adipate-co-polycaprolactam) (PBA-co-PCL)/multiwalled carbon nanotubes (MWCNTs) and polycaprolactone (PCL)/MWCNTs. The polymer/MWCNTs nanocomposites were prepared by mixing the polymers with various amounts of MWCNTs using both solution and melt blending processes. The dispersion of MWCNTs into the polymer matrix was analyzed by transmission electron microscopy (TEM) and the thermal stability of the nanocomposites was studied by thermal gravimetric analysis (TGA). Differential scanning calorimetry (DSC) was used to study the crystallization and melting behaviour of the polymer matrices containing the MWCNTs.

Thermal degradation of high-density polyethylene/soya spent powder blends

2015 ◽  
Vol 35 (5) ◽  
pp. 437-442 ◽  
Author(s):  
Sam Sung Ting ◽  
Norsri Kurniati Achmad ◽  
Hanafi Ismail ◽  
Ragunathan Santiagoo ◽  
Nik Noriman Zulkepli
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
High Density Polyethylene ◽  
High Density ◽  
Infrared Analysis ◽  
Scanning Calorimetry ◽  
Elongation At Break ◽  
Aging Period ◽  
Thermal Stability Of

Abstract This study investigates the properties of high-density polyethylene (HDPE) with different soya spent powder (SSP) blend contents upon oven aging. The aged properties of the HDPE/SSP blends were studied by using tensile test, thermogravimetric analysis, differential scanning calorimetry and Fourier transform infrared analysis. The tensile strength and elongation at break (Eb) decreased inversely proportional to SSP content and aging period. The thermal stability of the blends was significantly reduced after 21 days of aging. After aging, the melting temperature and crystallinity of the blends decreased with increasing aging period. These results revealed that samples with higher SSP content are more brittle upon oven aging.

Mechanical and thermal characterization of grafted PP-NCC nanocomposites

2019 ◽  
pp. 089270571987822
Author(s):  
Saud Aldajah ◽  
Mohammad Y Al-Haik ◽  
Waseem Siddique ◽  
Mohammad M Kabir ◽  
Yousef Haik
Keyword(s):  
Thermal Properties ◽  
Interfacial Adhesion ◽  
Thermal Characterization ◽  
Mechanical And Thermal Properties ◽  
Screw Extruder ◽  
Scanning Calorimetry ◽  
Three Point Bending ◽  
Twin Screw ◽  
Thermal Stability Of

This study reveals the enhancement of mechanical and thermal properties of maleic anhydride-grafted polypropylene (PP- g-MA) with the addition of nanocrystalline cellulose (NCC). A nanocomposite was manufactured by blending various percentages of PP, MA, and NCC nanoparticles by means of a twin-screw extruder. The influence of varying the percentages of NCC on the mechanical and thermal behavior of the nanocomposite was studied by performing three-point bending, nanoindentation, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy tests. The novelty of this study stems on the NCC nanoparticles and their ability to enhance the mechanical and thermal properties of PP. Three-point bending and nanoindentation tests revealed improvement in the mechanical properties in terms of strength, modulus, and hardness of the PP- g-MA nanocomposites as the addition of NCC increased. SEM showed homogeneity between the mixtures which proved the presence of interfacial adhesion between the PP- g-MA incorporated with NCC nanoparticles that was confirmed by the FTIR results. DSC and TGA measurements showed that the thermal stability of the nanocomposites was not compromised due to the addition of the coupling agent and reinforced nanoparticles.

Thermal Stability and Crystallization Behavior of PP/Organoclay Phase Change Composites

2013 ◽  
Vol 785-786 ◽  
pp. 123-126
Author(s):  
Ying Ye ◽  
Kun Yan Wang ◽  
Ge Chang ◽  
Qian Ying Jiang
Keyword(s):  
Thermal Stability ◽  
Phase Change ◽  
Crystallization Behavior ◽  
Melt Blending ◽  
X Ray Diffraction ◽  
Nucleation Agent ◽  
Scanning Calorimetry ◽  
Blending Method ◽  
Phase Change Composites ◽  
Change Material

Polypropylene/organoclay modified by dodecanol phase change material were prepared by melt blending method. The thermal stability and crystallization behavior was studied by thermogravimetry (TG), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). TG results indicated the window of processing of PP could be improved by adding small amount organoclay modified by dodecanol to the blend. DSC showed the organoclay modified by dodecanol affected the crystallization behavior of PP as heterogeneous nucleation agent. XRD results show that the organoclay modified by dodecanol does not change the crystal structure in the blends but only decrease the intensity of the diffraction peak.

Tuning the Mechanical Properties of High-Density Polyethylene by ECAE Process

2015 ◽  
Author(s):  
Catalin Fetecau ◽  
Felicia Stan ◽  
Laurentiu Sandu ◽  
Florin Susac
Keyword(s):  
Mechanical Properties ◽  
High Density Polyethylene ◽  
Equal Channel Angular Extrusion ◽  
Morphological Changes ◽  
Longitudinal Axis ◽  
High Density ◽  
Scanning Calorimetry ◽  
Plastic Deformations ◽  
The Third ◽  
Indentation Tests

This paper investigates the ability of the equal channel angular extrusion (ECAE) process to induce morphological changes and hence tune the mechanical properties of high-density polyethylene (HDPE). In this study, differential scanning calorimetry (DSC), compression and cylindrical macro-indentation tests have been used to investigate the evolution of the mechanical properties of HDPE processed by ECAE up to four passes via route BC, i.e. counter clockwise 90° billet rotation about its longitudinal axis. It was found that the ECAE process induces significant plastic deformations with changes in the crystalline structure. The ECAE process increased the HDPE crystallinity by 10 to 15%. The number of ECAE passes has a significant effect on the magnitude of the mechanical properties especially on the elastic modulus and yield stress. Young’s modulus and yield strength decreased with increasing the number of ECAE passes and reached a stationary state after the third pass.

Isothermal Crystallization Behavior of Poly (L-lactic Acid)/ Surface-Grafted Silica Nanocomposites

2012 ◽  
Vol 268-270 ◽  
pp. 37-40 ◽  
Author(s):  
Yan Hua Cai
Keyword(s):  
Lactic Acid ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Nucleating Agent ◽  
Melt Blending ◽  
Scanning Calorimetry ◽  
Silica Nanocomposites ◽  
Induction Periods ◽  
Sio2 Nanocomposites ◽  
Different Content

The Poly(L-lactic acid)(PLLA)/surface-grafting silica(g-SiO2) nanocomposites were prepared by melt blending. The isothermal crystallization behavior of PLLA/g-SiO2 nanocomposites with different content of g-SiO2 was investigated by optical depolarizer. In isothermal crystallization from melt, the induction periods and half times for overall PLLA crystallization (95°C Tc 120°C) were affected by the crystallization temperature and the content of g-SiO2 in nanocomposites. The results showed that g-SiO2 as a kind of heterogeneous nucleating agent can reduce induction periods and half times for overall PLLA crystallization. The thermal properties of PLLA/g-SiO2 samples were also investigated by differential scanning calorimetry (DSC), The results showed that the crystalline degree of PLLA was improved as the presence of g-SiO2.

Sign in / Sign up

Export Citation Format

Share Document