scholarly journals Impact Strength and Flexural Properties Enhancement of Methacrylate Silane Treated Oil Palm Mesocarp Fiber Reinforced Biodegradable Hybrid Composites

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Chern Chiet Eng ◽  
Nor Azowa Ibrahim ◽  
Norhazlin Zainuddin ◽  
Hidayah Ariffin ◽  
Wan Md. Zin Wan Yunus
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Flexural Properties ◽  
Melt Blending ◽  
Fiber Loading ◽  
Hydrophobic Polymer ◽  
The Matrix ◽  
Water Absorption Test

Natural fiber as reinforcement filler in polymer composites is an attractive approach due to being fully biodegradable and cheap. However, incompatibility between hydrophilic natural fiber and hydrophobic polymer matrix restricts the application. The current studies focus on the effects of incorporation of silane treated OPMF into polylactic acid (PLA)/polycaprolactone (PCL)/nanoclay/OPMF hybrid composites. The composites were prepared by melt blending technique and characterize the composites with Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). FTIR spectra indicated that peak shifting occurs when silane treated OPMF was incorporated into hybrid composites. Based on mechanical properties results, incorporation of silane treated OPMF enhances the mechanical properties of unmodified OPMF hybrid composites with the enhancement of flexural and impact strength being 17.60% and 48.43%, respectively, at 10% fiber loading. TGA thermogram shows that incorporation of silane treated OPMF did not show increment in thermal properties of hybrid composites. SEM micrographs revealed that silane treated OPMF hybrid composites show good fiber/matrix adhesion as fiber is still embedded in the matrix and no cavity is present on the surface. Water absorption test shows that addition of less hydrophilic silane treated OPMF successfully reduces the water uptake of hybrid composites.

Influence of stacking sequence and orientation of the fabric on mechanical properties of twill Kenaf/Kevlar reinforced unsaturated polyester hybrid composites

2021 ◽  
pp. 152808372110199
Author(s):  
HT Sreenivas ◽  
N Krishnamurthy ◽  
MS Murali ◽  
GR Arpitha
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Flexural Strength ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Synthetic Fiber ◽  
Stacking Sequence ◽  
The Matrix

The current study investigates on development of hybrid composite with Kenaf/Kevlar as reinforcement and unsaturated Polyester as the matrix considering stacking sequence, the orientation of fabric and twill 2x2 weave of the Kenaf fabric in particular. Five laminates (L1, L2, L3, L4, and L5) were developed by stacking the lamina's one over the other with the matrix and then cured in an autoclave. The laminates were subjected to experimental investigation to evaluate mechanical properties such as tensile strength, flexural strength, hardness, and impact strength. Results indicate that L5 shows good flexural strength and modulus, high hardness, and good impact strength, whereas L4 indicates the best tensile strength and tensile modulus. To summarize, the hybridization resulted in an average of 30% increased mechanical property for Laminate L5. The effect of stacking in L5 has a significant impact on the property of the composite. The results of the study were mainly focused on minimizing the use of synthetic fiber and replacing it with natural fiber. SEM analysis was performed on fractured surfaces of specimens which revealed that the failure of the laminated composite is due to poor interfacial bonding among fiber and matrix. Overall, the composite obtained from the combination of Kenaf and Kevlar fabrics had the best balance of properties finds appropriate application for car bumpers, fenders, boat hull, turbine blade etc.

Processability and Mechanical Properties of CB/PVC Composite

2013 ◽  
Vol 681 ◽  
pp. 252-255
Author(s):  
Xiu Qi Liu ◽  
He Qin Xing ◽  
Li Li Zhao ◽  
Dan Wang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Carbon Black ◽  
Melt Blending ◽  
The Matrix

In our study, a new kind of material was prepared by melt blending with PVC as the matrix and carbon black (CB) as the filler. With the amount of CB increasing, the notched impact strength of composite increased greatly, however the tensile strength declined. When the amount of CB was 30%, the notched impact strength of composite was 9.66 KJ/m2, the tensile strength dropped from 48.3MPa to 33.2MPa. The distribution of CB in the PVC matrix is relatively uniform and no large agglomeration in the PVC matrix.

scholarly journals An Investigation on Wear, Hardness and Impact Behaviour of Hybrid Composites

2021 ◽  
Vol 9 (10) ◽  
pp. 538-546
Author(s):  
Gangadhara H S
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Epoxy Composite ◽  
Hybrid Composites ◽  
Pairwise Comparison ◽  
Relative Significance ◽  
Synthetic Fibers ◽  
New Class ◽  
The Matrix ◽  
Two Hybrid

Abstract: According to the environmental aspects, the combinations of natural and synthetic fibers has been used for making eco-friendly products. The present investigation has been made develop and characterize a new class of composites with a polymer called epoxy-resin as the matrix and Hemp and synthetic fibers (Carbon, E-glass, Kevlar) are the reinforcing material. These materials are fabricated using hand layup technique to frame a fallowing hybrid composite, 1) Hemp/Carbon/Epoxy 2) Hemp/E-glass/Epoxy 3) Hemp/Kevlar/epoxy composites of 3mm thickness to find the various mechanical properties (wear, hardness and impact strength) of produced samples as per ASTM Standards. For defining relative significance of measured norms pairwise comparison was done. Wear, Hardness and Impact properties are carried out. The effect of fiber loading and length on mechanical properties like wear, hardness and impact strength of composites is studied. In these fallowing conditions shows a better property. The result on this study indicated that Hemp/Kevlar/Epoxy composite shows better impact mechanical properties compare to another two hybrid composites. Hemp/E-Glass/Epoxy composite shows better wear and hardness properties compare to another two hybrid composites. Hemp/Carbon/Epoxy composite shows intermediate properties compare to Hemp/E-Glass/Epoxy and Hemp/Kevlar/Epoxy composite. Keywords: Hemp, Carbon, Glass, Kevlar, Epoxy, Wear, Hardness, Impact test

scholarly journals Investigation of Weight Fraction and Alkaline Treatment on Catechu Linnaeus/Hibiscus cannabinus/Sansevieria Ehrenbergii Plant Fibers-Reinforced Epoxy Hybrid Composites

2022 ◽  
Vol 2022 ◽  
pp. 1-9
Author(s):  
R. Rangaraj ◽  
S. Sathish ◽  
T. L. D. Mansadevi ◽  
R. Supriya ◽  
Raviteja Surakasi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Hybrid Composites ◽  
Weight Fraction ◽  
Alkaline Treatment ◽  
Fiber Composites ◽  
Hibiscus Cannabinus ◽  
Plant Fibers ◽  
The Matrix ◽  
Treated Fiber

The aim of the present work is to develop novel hybrid composites using areca, kenaf, and snake grass fibers as reinforcement and epoxy as the matrix. The areca, kenaf, and snake grass fibers were extracted from Catechu Linnaeus, Hibiscus cannabinus, and Sansevieria Ehrenbergii plants, respectively, and treated with 5% NaOH to improve the interfacial adhesion between the hydrophilic fiber and the hydrophobic matrix. Hybrid composites were developed by the compression molding technique and formulated based on the weight fraction of fibers. Tensile, flexural, and impact strength and hardness samples were prepared as per ASTM D 3039, ASTM D 790, ASTM D 256, and ASTM D 2240, respectively. The effects of alkaline treatment on developed hybrid composites were investigated. The developed hybrid composites with 20% wt. snake grass and 10% wt. areca fiber present interesting mechanical properties with a tensile strength of 58 MPa, flexural strength of 124 MPa, impact strength of 5.24 kJ/m2, and hardness of 88. The results indicate that maximum mechanical properties were obtained for alkaline-treated fiber composites with 20% wt. snake grass fiber compared to untreated fiber composites owing to better adhesion between the treated fiber and the matrix. The effect of alkaline treatment was analyzed by Fourier transform infrared. The fractured surfaces of tested samples were analyzed by scanning electron microscopy.

Morphology and Properties of ASA/PC Blends

2012 ◽  
Vol 450-451 ◽  
pp. 1467-1470
Author(s):  
Ye Han ◽  
Jing Liu ◽  
Xing Jian He ◽  
Chao Zhou
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Melt Blending ◽  
Acrylate Copolymer ◽  
The Matrix ◽  
Dispersion Condition

Acrylonitrile-styrene-acrylate copolymer/polycarbonate (ASA/PC) blends were prepared over a range of compositions via mixing PC, SAN, and ASA copolymer by melt blending. An analysis was made on the mechanical properties and morphology of the blends. When a small amount SAN was introduced to ASA/PC blends, the dispersion condition of ASA in the matrix was improved and a better integrated mechanical properties was realized. Further increasing the SAN content led to a decrease of impact strength, which was due to the changing of the morphology of the blends and the inherent brittleness of matrix. Introduction

Effect of Halloysite Nanotubes on Physico-Mechanical Properties of Silk/Basalt Fabric Reinforced Epoxy Composites

2022 ◽  
Vol 1048 ◽  
pp. 21-32
Author(s):  
S.M. Darshan ◽  
Bheemappa Suresha
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Natural Fiber ◽  
Environmental Concern ◽  
Hybrid Composites ◽  
Basalt Fiber ◽  
Halloysite Nanotubes ◽  
Fiber Reinforced ◽  
Structural Applications ◽  
The Impact

Natural fiber reinforced polymer composites have become more attractive due to their high specific strength, light weight and environmental concern. However, some limitations such as low modulus and poor moisture resistance were reported. This paper presents the role of halloysite nanotubes (HNTs) on physico-mechanical properties of bidirectional silk and basalt fiber reinforced epoxy (SF-BF/Ep) hybrid composites. Vacuum bagging and ultra-sonication method were used for the fabrication of hybrid composite slabs. The effect of HNT loadings (1.5, 3 and 4.5 wt. %) on physico-mechanical characteristics like density, hardness, flexural and impact properties of SF-BF/Ep composites were determined according to ASTM standards. Experimental results revealed that the incorporation of HNTs improves the mechanical properties. The impact strength of SF-BF/Ep is predominant at 3 wt. % HNT loading where the impact strength surges to 568.67 J/m, which may render HNT filled SF-BF/Ep desirable for various toughness-critical structural applications. The test results demonstrated that SF-BF/Ep-3HNT coded composites exhibited improved mechanical properties among the all composites.

Morphology and Mechanical Properties of Polyethylene Terephthalate/Ethylene Propylene Diene Monomer (PET/EPDM) in the Presence of Nanoclay

2020 ◽  
Vol 57 (3) ◽  
pp. 249-259
Author(s):  
Baifen Liu ◽  
Mohammad Mirjalili ◽  
Peiman Valipour ◽  
Sajad Porzal ◽  
shirin Nourbakhsh
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Thermal Destruction ◽  
Processing Temperature ◽  
Tem Analysis ◽  
Maximum Stiffness ◽  
Cloisite 30B ◽  
Nano Clay ◽  
The Matrix ◽  
Sample Maximum

This research deals with the mechanical properties, microstructure, and interrelations of triple nanocomposite based on PET/EPDM/Nanoclay. These properties were examined in different percentages of PET/EPDM blend with compatibilizer (Styrene-Ethylene/Butylene-Styrene)-G-(Maleic anhydrate) (SEBS-g-MAH). Results showed that the addition of 15% SEBS-g-MAH improved the toughness and impact strength of this nanocomposite. SEM micrographs indicated the most stable fuzzy microstructure in a 50/50 mixture of scattered phases of EPDM/SEBS-g-MAH. The effects of percentages of 1, 3, 5, 7 nanoclay Cloisite 30B (C30B) on the improvement of the properties were evaluated. With the addition of nano clay, the toughness and impact strength was reduced. Thermal destruction of nanoclay in processing temperature led to the decreasing dispersion of clay plates in the matrix and a reduction in the distances of nano clay plates in the composite compared to pure nano clay. XRD and TEM analysis was used to demonstrate the results. By adding 1% of nanoclay to the optimal sample, maximum stiffness, and Impact strength, among other nanocomposites, was achieved.

Mechanical Property Studies on Flax Fiber Reinforced Basalt Powder Filled Polyester Composite

2020 ◽  
Vol 13 ◽  
Author(s):  
V. Arumugaprabu ◽  
K.Arun Prasath ◽  
S. Mangaleswaran ◽  
M. Manikanda Raja ◽  
R. Jegan
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Natural Fiber ◽  
Tensile Load ◽  
Flax Fiber ◽  
Flexural Properties ◽  
Weight Percentage ◽  
Tensile Impact ◽  
Polyester Composite ◽  
Additional Support

: The objective of this research is to evaluate the tensile, impact and flexural properties of flax fiber and basalt powder filled polyester composite. Flax fiber is one of the predominant reinforcement natural fiber which possess good mechanical properties and addition of basalt powder as a filler provides additional support to the composite. The Composites are prepared using flax fiber arranged in 10 layers with varying weight percentage of the basalt powder as 5 wt.%, 10 wt.%, 15 wt.%, 20 wt.%, 25 wt.% and 30 wt.% respectively. From the results it is inferred that the composite combination 10 Layers of flax / 5 wt.%, basalt Powder absorbs more tensile load of 145 MPa. Also, for the same combination maximum flexural strength is about 60 MPa. Interestingly in the case of impact strength more energy was absorbed by 10 layers of flax and 30 wt.% of basalt powder. In addition, the failure mechanism of the composites also discussed briefly using SEM studies.

scholarly journals Effects of water absorption on the mechanical properties of hybrid natural fibre/phenol formaldehyde composites

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sekar Sanjeevi ◽  
Vigneshwaran Shanmugam ◽  
Suresh Kumar ◽  
Velmurugan Ganesan ◽  
Gabriel Sas ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Water Absorption ◽  
Hybrid Composites ◽  
Phenol Formaldehyde ◽  
Natural Fibre ◽  
The Other ◽  
Fibre Reinforcement ◽  
Dry Conditions

AbstractThis investigation is carried out to understand the effects of water absorption on the mechanical properties of hybrid phenol formaldehyde (PF) composite fabricated with Areca Fine Fibres (AFFs) and Calotropis Gigantea Fibre (CGF). Hybrid CGF/AFF/PF composites were manufactured using the hand layup technique at varying weight percentages of fibre reinforcement (25, 35 and 45%). Hybrid composite having 35 wt.% showed better mechanical properties (tensile strength ca. 59 MPa, flexural strength ca. 73 MPa and impact strength 1.43 kJ/m2) under wet and dry conditions as compared to the other hybrid composites. In general, the inclusion of the fibres enhanced the mechanical properties of neat PF. Increase in the fibre content increased the water absorption, however, after 120 h of immersion, all the composites attained an equilibrium state.

Development of Banana/Coir Natural Fibers Reinforced Polypropylene Hybrid Composites: The Effect of MA-g-PP (Maleic Anhydride Grafted Polypropylene) on Mechanical Properties and Thermal Properties

2021 ◽  
Vol 32 ◽  
pp. 85-97
Author(s):  
Gunturu Bujjibabu ◽  
Vemulapalli Chittaranjan Das ◽  
Malkapuram Ramakrishna ◽  
Konduru Nagarjuna
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Coupling Agent ◽  
Mechanical Performance ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Mechanical Tests ◽  
Coir Fiber ◽  
Banana Fiber ◽  
C Fibers

Banana/Coir fiber reinforced polypropylene hybrid composites was formulated by using twin screw extruder and injection molding machine. Specimens were prepared untreated and treated B/C Hybrid composites with 4% and 8% of MA-g-PP to increase its compatibility with the polypropylene matrix. Both the without MA-g-PP and with MA-g-PP B/C hybrid composites was utilized and three levels of B/C fiber loadings 15/5, 10/10 and 5/15 % were used during manufacturing of B/C reinforced polypropylene hybrid composites. In this work mechanical performance (tensile, flexural and impact strengths) of untreated and treated (coupling agent) with 4% and 8% of MA-g-PP B/C fibers reinforced polypropylene hybrid composite have been investigated. Treated with MA-g-PP B/C fibers reinforced specimens explored better mechanical properties compared to untreated B/C fibers reinforced polypropylene hybrid composites. Mechanical tests represents that tensile, flexural and impact strength increases with increase in concentration of coupling agent compared to without coupling agent MA-g-PP hybrid composites . B/C fibers reinforced polymer composites exhibited higher tensile, flexural and impact strength at 5% of Banana fiber, 15% of fiber Coir in the presence of 8% of MA-g-PP compared to 4% of MA-g-PP and untreated hybrid composites. The percentage of water absorption in the B/C fibers reinforced polypropylene hybrid composites resisted due to the presence of coupling agent MA-g-PP and thermogravimetry analysis (TGA) also has done.

Sign in / Sign up

Export Citation Format

Share Document