scholarly journals Synthesis of MgO Nanoparticles by Solvent Mixed Spray Pyrolysis Technique for Optical Investigation

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
K. R. Nemade ◽  
S. A. Waghuley
Keyword(s):  
Particle Size ◽  
Spray Pyrolysis ◽  
Spray Pyrolysis Technique ◽  
Average Particle Size ◽  
Band Gap Energy ◽  
Average Particle ◽  
Optical Investigation ◽  
X Ray Diffraction ◽  
Mgo Nanoparticles ◽  
Electron Microscope Analysis

Solvent mixed spray pyrolysis technique has attracted a global interest in the synthesis of nanomaterials since reactions can be run in liquid state without further heating. Magnesium oxide (MgO) is a category of the practical semiconductor metal oxides, which is extensively used as catalyst and optical material. In the present study, MgO nanoparticles were successfully synthesized using a solvent mixed spray pyrolysis. The X-ray diffraction pattern confirmed the formation of MgO phase with an excellent crystalline structure. Debye-Scherrer equation is used for the determination of particle size, which was found to be 9.2 nm. Tunneling electron microscope analysis indicated that the as-synthesized particles are nanoparticles with an average particle size of 9 nm. Meanwhile, the ultraviolet-visible spectroscopy of the resulting product was evaluated to study its optical property via measurement of the band gap energy value.

scholarly journals Thermal, Structural, and Physical Properties of Freeze Dried Tropical Fruit Powder

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
K. A. Athmaselvi ◽  
C. Kumar ◽  
M. Balasubramanian ◽  
Ishita Roy
Keyword(s):  
Particle Size ◽  
Physical Properties ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Tropical Fruit ◽  
X Ray ◽  
Freeze Dried ◽  
Fruit Powder ◽  
Lcr Meter

This study evaluates the physical properties of freeze dried tropical (guava, sapota, and papaya) fruit powders. Thermal stability and weight loss were evaluated using TGA-DSC and IR, which showed pectin as the main solid constituent. LCR meter measured electrical conductivity, dielectric constant, and dielectric loss factor. Functional groups assessed by FTIR showed presence of chlorides, and O–H and N–H bonds in guava, chloride and C–H bond in papaya, and chlorides, and C=O and C–H bonds in sapota. Particle size and type of starch were evaluated by X-ray diffraction and microstructure through scanning electronic microscopy. A semicrystalline profile and average particle size of the fruit powders were evidenced by X-ray diffraction and lamellar/spherical morphologies by SEM. Presence of A-type starch was observed in all three fruits. Dependence of electric and dielectric properties on frequency and temperature was observed.

Gas-phase particle size distributions and lead loss during spray pyrolysis of (Bi,Pb)–Sr–Ca–Cu–O

1995 ◽  
Vol 10 (7) ◽  
pp. 1644-1652 ◽  
Author(s):  
Abhijit S. Gurav ◽  
Toivo T. Kodas ◽  
Jorma Joutsensaari ◽  
Esko I. Kauppincn ◽  
Riitta Zilliacus
Keyword(s):  
Particle Size ◽  
Spray Pyrolysis ◽  
Gas Phase ◽  
Phase Particle ◽  
Average Particle Size ◽  
Particle Diameter ◽  
Processing Temperature ◽  
Average Particle ◽  
Size Distributions ◽  
Particle Size Distributions

Gas-phase particle size distributions and lead loss were measured during formation of (Bi,Pb)-Sr-Ca-Cu-O and pure PbO particles by spray pyrolysis at different temperatures. A differential mobility analyzer (DMA) in conjunction with a condensation particle counter (CPC) was used to monitor the gas-phase particle size distributions, and a Berner-type low-pressure impactor was used to obtain mass size distributions and size-classified samples for chemical analysis. For (Bi,Pb)-Sr-Ca-Cu-O, as the processing temperature was raised from 200 to 700 °C, the number average particle size decreased due to metal nitrate decomposition, intraparticle reactions forming mixed-metal oxides and particle densification. The geometric number mean particle diameter was 0.12 μm at 200 °C and reduced to 0.08 and 0.07 μm, respectively, at 700 and 900 °C. When the reactor temperature was raised from 700 and 800 °C to 900 °C, a large number (∼107 no./cm3) of new ultrafine particles were formed from PbO vapor released from the particles and the reactor walls. Particles made at temperatures up to 700 °C maintained their initial stoichiometry over the whole range of particle sizes monitorcd; however, those made at 800 °C and above were heavily depleted in lead in the size range 0.5–5.0 μm. The evaporative losses of lead oxide from (Bi,Pb)-Sr-Ca-Cu-O particles were compared with the losses from PbO particles to gain insight into the pathways involved in lead loss and the role of intraparticle processes in controlling it.

Frequency dependence and fuel effect on optical properties of nano TiO2-based structures

2016 ◽  
Vol 30 (18) ◽  
pp. 1650247 ◽  
Author(s):  
Mahdi Ghasemifard ◽  
Misagh Ghamari ◽  
Meysam Iziy
Keyword(s):  
Particle Size ◽  
Optical Properties ◽  
Average Particle Size ◽  
Combustion Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
Transmission Electron ◽  
Auto Combustion ◽  
Xrd Patterns

TiO2-(Ti[Formula: see text]Si[Formula: see text]O2 nanopowders (TS-NPs) with average particle size around 90 nm were successfully synthesized by controlled auto-combustion method by using citric acid/nitric acid (AC:NA) and urea/metal cation (U:MC). The structure of powders was studied based on their X-ray diffraction (XRD) patterns. The XRD of TS-NPs shows that rutile and anatase are the main phases of TS-NPs for AC:NA and U:MC, respectively. Particle size and histogram of nanopowders were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS). Optical properties of TS-NPs were calculated by Fourier transform infrared spectroscopy (FTIR) and Kramers–Kroning (KK) relation. Plasma frequencies of TS-NPs obtained from energy loss functions depend on fuels as a result of changes in crystal structure, particle size distribution, and morphology.

Effect of Surfactant on the Preparation of Nano-powder for Yb Doping Laser Transparent YAG Ceramic

2013 ◽  
Vol 32 (5) ◽  
pp. 511-515 ◽  
Author(s):  
Xiao Guo Cao ◽  
Jia Wang ◽  
Qi Bai Wu ◽  
Hai Yan Zhang
Keyword(s):  
Particle Size ◽  
Polyethylene Glycol ◽  
Average Particle Size ◽  
Ammonium Bicarbonate ◽  
Spherical Particles ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Nano Powder ◽  
Co Precipitation

AbstractYb:YAG transparent ceramic nano-powder was prepared by chemical co-precipitation method, with ammonium bicarbonate as the precipitant and polyethylene glycol as surfactant. The addition of polyethylene glycol can reduce the agglomeration and particle size of the prepared Yb:YAG powder. The morphology, thermal stability and phase structure of Yb:YAG nano-powder were charactered by scanning electron microscopy (SEM), thermogravimetry and differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy. The results show that well-crystallized nano-powder was obtained by calcining the precursors at 900 °C for 3 h. The average particle size of Yb:YAG powder is about 100–200 nm. When the volume amount of polyethylene glycol is 2.0%, well-dispersed Yb:YAG powder with spherical particles of 100 nm diameter was obtained.

Preparation and Characterization of Gold Nanoparticles in the Presence of Citrate and Soybean Seed Extract in an Acidic Conditions

Drug Research ◽  
2017 ◽  
Vol 67 (05) ◽  
pp. 266-270 ◽  
Author(s):  
Ebrahim Izadi ◽  
Ali Rasooli ◽  
Abolfazl Akbarzadeh ◽  
Soodabeh Davaran
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Size Distribution ◽  
Average Particle Size ◽  
Soybean Seed ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Soybean Extract ◽  
Average Size

AbstractThrough the present study, an eco-friendly method was used to synthesize the gold nanoparticles (GNPs) by using the sodium citrate and extract of the soybean seed as reducing the agents at PH 3. X-Ray diffraction (XRD) method was used to evaluate the crystal structure of as-synthesized NPs and it’s revealed that this method leads to well crystallized GNPs. In order to determine the particle size and their distribution, field emission scanning microscopy (FE-SEM) and dynamic light scattering (DLS) were used. The results showed that, the average particle size distribution of synthesized GNPs in solutions containing of the soybean extract and 1% citrate at PH 3 is about 109.6 and 140.9 nm, respectively. Also, we find that the average size of GNPs is 40 and 33 nm from solutions of citrate and soybean extract, respectively. It was concluded that using the extract of soybean seeds as reducing agent can lead to GNPs with small size and narrow size distribution.

scholarly journals Synthesis and characterization of ZnTe nanoparticles

2016 ◽  
Vol 17 (1) ◽  
pp. 1-3 ◽  
Author(s):  
Sujan Dhungana ◽  
Bhoj Raj Paudel ◽  
Surendra K. Gautam
Keyword(s):  
Particle Size ◽  
Field Effect Transistors ◽  
Average Particle Size ◽  
Precursor Solution ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Zinc Compounds ◽  
Transmission Electron

In this work, we report the ZnTe semiconductor nanoparticles (NPs) prepared by aqueous chemical precipitation method using the tellurium precursor solution with different zinc compounds. Three batches of ZnTe NPs were synthesized to study the effect of dilution on the size and phase purity of ZnTe. The influence of source compounds and concentrations of the size and structure of NPs were studied. ZnTe NPs have great applications as field-effect transistors and photodetectors. The existing controversy regarding the crystalline structure of ZnTe NPs, whether it is cubic or hexagonal, has been resolved using X-ray Diffraction (XRD) data. The ZnTe NPs possess cubic structure, which is also confirmed by Electron Diffraction (ED) pattern. The average particle size determined from XRD data with the help of Debye-Scherrer equation is about 6 nm. The particle size can be further verified by Transmission Electron Microscopy (TEM) studies.  

Study on Nickel Nanopowders Prepared by Arc Plasma

2013 ◽  
Vol 734-737 ◽  
pp. 1555-1558
Author(s):  
Cong Hua Hou ◽  
Yun Ge Chen
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Barometric Pressure ◽  
Constant Current ◽  
Average Particle ◽  
Face Centered Cubic ◽  
Arc Plasma ◽  
X Ray Diffraction ◽  
Current Voltage ◽  
Face Centered

In order to prepare the nickel nano-metal with high purity and uniform particle size , the arc plasma method was used. The nano-Ni was got under a constant current , voltage , barometric pressure, hydrogen and argon gas . The nickel nanopowders were tested through the Scan Electron Microscope (SEM ), X-ray diffraction (XRD), Laser Sizer Analysis (LSA). The results indicated that the feature of the nickel nanopowders were mainly spherical, smooth surface. The nickel powder particle distribute from 40 to 80nm. And average particle size is 60nm. Nanocrystals had a better internal crystallinity. The crystal structure is face-centered cubic FCC structure, the same as ordinary nickel nanoparticles .

scholarly journals Characterisation and Optical Studies of Copper Oxide Nanostructures Doped with Lanthanum Ions

2014 ◽  
Vol 14 (4) ◽  
pp. 49-60 ◽  
Author(s):  
G. Varughese ◽  
V. Rini ◽  
S.P. Suraj ◽  
K.T. Usha
Keyword(s):  
Particle Size ◽  
Copper Oxide ◽  
Average Particle Size ◽  
Band Gap Energy ◽  
Average Particle ◽  
Nano Materials ◽  
Chemical Route ◽  
Direct Band ◽  
Gap States ◽  
La Doped

AbstractCopper Oxide is an extensively studied group II-VI semiconductor with optical properties. It exhibits a wide variety of morphologies in the nano regime that can be grown by tuning the growth habit of the CuO crystal. CuO nano materials with an average particle size of 15-27 nm are synthesized by chemical route. XRD, SEM, FTIR UV-Vis and EDS characterize the samples. The percentage of doping material is confirmed from the EDS spectra. The average crystal size of the prepared CuO: La nanopowder is determined by XRD. The UV absorption spectra revealed the absorption edge at wavelength 389 nm indicating the smaller size of CuO:La nano particle. The optical direct band gap energy of doped CuO nanoparticle is found to be in the range 3.149 eV. The increasing red shift with decreasing particle size suggests that the defects responsible for the intra gap states are primarily surface defect. The La doped CuO is highly effective and can significantly enhance the photo catalytic degradation.

scholarly journals Fabrication of Caseinate Stabilized Thymol Nanosuspensions via the pH-Driven Method: Enhancement in Water Solubility of Thymol

Foods ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 1074
Author(s):  
Wei Zhou ◽  
Yun Zhang ◽  
Ruyi Li ◽  
Shengfeng Peng ◽  
Roger Ruan ◽  
...  
Keyword(s):  
Particle Size ◽  
Water Solubility ◽  
Ph Value ◽  
Average Particle Size ◽  
Amorphous State ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Commercial Products ◽  
Long Term Storage

Thymol has been applied as a spice and antibacterial agent in commercial products. However, the utilization of thymol in the food and pharmaceutical field has recently been limited by its poor water solubility and stability. In this work, a caseinate-stabilized thymol nanosuspension was fabricated by pH-driven methods to overcome those limitations. Firstly, the chemical stability of thymol at different pH value conditions was investigated. The physiochemical properties of thymol nanosuspensions were then characterized, such as average particle size, zeta potential, encapsulation efficiency, and loading capacity. Meanwhile, the X-ray diffraction results showed that thymol was present as an amorphous state in the nanosuspensions. The thermal stability of thymol was slightly enhanced by encapsulation through this process, and the thymol nanosuspensions were stable during the long-term storage, and the average particle size of nanosuspensions showed that there was no aggregation of nanosuspensions during storage and high temperature. Finally, the antimicrobial activity of thymol nanosuspensions was evaluated by investigating the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against Salmomella enterca, Staphlococcus aureus, Escherichia coli, and Listeria monocytogenes. These results could provide useful information and implications for promoting the application of thymol in food, cosmetic, and pharmaceutical commercial products.

scholarly journals Structural and Optical Characterization of ZnO Nanoparticles Synthesized by Microemulsion Route

2013 ◽  
Vol 19 ◽  
pp. 26-36 ◽  
Author(s):  
Harish Kumar ◽  
Renu Rani
Keyword(s):  
Zno Nanoparticles ◽  
Thermal Studies ◽  
Average Particle Size ◽  
Band Gap Energy ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Visible Spectra ◽  
Ft Ir

ZnO nanoparticles were synthesized by microemulsion route in W/S ratio of 5 at room temperature. X-ray diffraction (XRD) pattern reveals wurtzite structure of ZnO nanoparticles. Rod shape of ZnO nanoparticles of average particle size 10.0 to 12.0 nm were observed by transmission electron microscopy. FT-IR spectra confirmed the adsorption of surfactant molecules at the surface of ZnO nanoparticles and presence of Zn-O bonding. Thermal studies were carried out by the differential scanning calorimeter (DSC) techniques. In addition, UV-Visible spectra were employed to estimate the band gap energy of ZnO nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document