scholarly journals A CPW-Fed Dual-Band-Notched Antenna with Sharp Skirt Selectivity for UWB Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Dacheng Dong ◽  
Shaojian Chen ◽  
Zhouying Liao ◽  
Gui Liu
Keyword(s):  
Group Delay ◽  
Coplanar Waveguide ◽  
Dual Band ◽  
Back Surface ◽  
Radiation Patterns ◽  
Uwb Antenna ◽  
Ieee 802.11A ◽  
Notched Band ◽  
Measurement Results ◽  
Uwb Applications

A coplanar waveguide- (CPW-) fed dual-band-notched antenna with sharp skirt selectivity for ultrawideband (UWB) applications is presented. The proposed antenna is composed of a radiant patch with a C-shaped slot and a C-shaped stub on the back surface of the substrate. By using the C-shaped slot and the C-shaped stub, dual-band-notched characteristics can be generated. In this way, a more practical and effective approach to design an UWB antenna with sharp notched-band-edge selectivity is developed. The measurement results show dual notched bands of 4.96–5.42 GHz and 5.71–5.91 GHz, which can reject the interference between IEEE 802.11a bands (5.15–5.35 GHz and 5.725–5.825 GHz) and UWB systems. The fabricated antenna shows good omnidirectional radiation patterns with acceptable gain and group delay.

A Compact CPW-Fed UWB Antenna with Dual-Band Notched Characteristics for WiMAX/WLAN Applications

2021 ◽  
Vol 36 (2) ◽  
pp. 145-151
Author(s):  
Rabah Aldhaheri ◽  
Ibrahim Alruhaili ◽  
Kamili Babu ◽  
Muntasir Sheikh
Keyword(s):  
Wireless Communications ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Band Width ◽  
Dual Band ◽  
Radiation Patterns ◽  
Uwb Antenna ◽  
Uwb Antennas ◽  
Measured Radiation ◽  
Uwb Applications

A dual-notched bands ultra-wideband (UWB) antenna with coplanar waveguide (CPW) fed is presented in the paper. The two notched bands are selected at 3.5 and 5.8 GHz frequencies to overcome the interference from WiMAX and WLAN bands. The overall size of the antenna is 17.5×17.5 mm2, which can be considered as one of the smallest UWB antennas in the literature. The developed antenna has an impedance band width ranging from 2.9 to 13 GHz. The measured radiation patterns on E and H planes are nearly omni-directional and stable with acceptable gain over the entire band. The dual-band notched at WiMAX and WLAN is created by embedding I-shaped and C-shaped stubs in the radiation patch of the antenna. Due to the compactness, good radiation patterns and the reasonable stable gain, this antenna is well suited for integration into portable wireless communications devices for UWB applications.

scholarly journals A Compact Printed Quadruple Band-Notched UWB Antenna

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Xiaoyin Li ◽  
Lianshan Yan ◽  
Wei Pan ◽  
Bin Luo
Keyword(s):  
Coplanar Waveguide ◽  
Radiation Patterns ◽  
Uwb Antenna ◽  
Broad Bandwidth ◽  
Wireless Applications ◽  
Notched Band ◽  
Low Profile ◽  
X Band

A novel compact coplanar waveguide- (CPW-) fed ultrawideband (UWB) printed planar volcano-smoke antenna (PVSA) with four band-notches for various wireless applications is proposed and demonstrated. The low-profile antenna consists of a C-shaped parasitic strip to generate a notched band at 8.01~8.55 GHz for the ITU band, two C-shaped slots, and an inverted U-shaped slot etched in the radiator patch to create three notched bands at 5.15~5.35 GHz, 5.75~5.85 GHz, and 7.25~7.75 GHz for filtering the WLAN and X-band satellite signals. Simulated and measured results both confirm that the proposed antenna has a broad bandwidth of 3.1~12 GHz with VSWR < 2 and good omnidirectional radiation patterns with four notched-bands.

scholarly journals Realizing UWB Antenna Array with Dual and Wide Rejection Bands Using Metamaterial and Electromagnetic Bandgaps Techniques

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 269
Author(s):  
Ayman A. Althuwayb ◽  
Mohammad Alibakhshikenari ◽  
Bal S. Virdee ◽  
Pancham Shukla ◽  
Ernesto Limiti
Keyword(s):  
Antenna Array ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Average Gain ◽  
Left Handed ◽  
Notched Band

This research article describes a technique for realizing wideband dual notched functionality in an ultra-wideband (UWB) antenna array based on metamaterial and electromagnetic bandgap (EBG) techniques. For comparison purposes, a reference antenna array was initially designed comprising hexagonal patches that are interconnected to each other. The array was fabricated on standard FR-4 substrate with thickness of 0.8 mm. The reference antenna exhibited an average gain of 1.5 dBi across 5.25–10.1 GHz. To improve the array’s impedance bandwidth for application in UWB systems metamaterial (MTM) characteristics were applied it. This involved embedding hexagonal slots in patch and shorting the patch to the ground-plane with metallic via. This essentially transformed the antenna to a composite right/left-handed structure that behaved like series left-handed capacitance and shunt left-handed inductance. The proposed MTM antenna array now operated over a much wider frequency range (2–12 GHz) with average gain of 5 dBi. Notched band functionality was incorporated in the proposed array to eliminate unwanted interference signals from other wireless communications systems that coexist inside the UWB spectrum. This was achieved by introducing electromagnetic bandgap in the array by etching circular slots on the ground-plane that are aligned underneath each patch and interconnecting microstrip-line in the array. The proposed techniques had no effect on the dimensions of the antenna array (20 mm × 20 mm × 0.87 mm). The results presented confirm dual-band rejection at the wireless local area network (WLAN) band (5.15–5.825 GHz) and X-band satellite downlink communication band (7.10–7.76 GHz). Compared to other dual notched band designs previously published the footprint of the proposed technique is smaller and its rejection notches completely cover the bandwidth of interfering signals.

Design of a compact UWB antenna with a partial ground plane on epoxy woven glass material

2017 ◽  
Vol 24 (1) ◽  
pp. 73-79
Author(s):  
Md. Moinul Islam ◽  
Mohammad Tariqul Islam ◽  
Mohammad Rashed Iqbal Faruque ◽  
Rabah W. Aldhaheri ◽  
Md. Samsuzzaman
Keyword(s):  
Dielectric Material ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Design Parameters ◽  
Uwb Antenna ◽  
Glass Material ◽  
Measurement Results ◽  
Good Term ◽  
Parametric Analyses ◽  
Uwb Applications

AbstractA compact ultra-wideband (UWB) antenna is presented in this paper with a partial ground plane on epoxy woven glass material. The study is discussed to comprehend the effects of various design parameters with explicit parametric analyses. The overall antenna dimension is 0.22×0.26×0.016 λ. A prototype is made on epoxide woven glass fabric dielectric material of 1.6 mm thickness. The measured results point out that the reported antenna belongs to a wide bandwidth comprehending from 3 GHz to more than 11 GHz with VSWR<2. It has a peak gain of 5.52 dBi, where 3.98 dBi is the average gain. Nearly omnidirectional radiation patterns are observed within the operating frequency bands. A good term exists between simulation and measurement results, which lead the reported antenna to be an appropriate candidate for UWB applications.

scholarly journals Design of Ultra-Wideband Tapered Slot Patch Antenna with Reconfigurable Dual Band-Notches

2020 ◽  
Vol 55 (4) ◽  
Author(s):  
Amer Abbood Al-Behadili ◽  
Adham R. Azeez ◽  
Sadiq Ahmed ◽  
Zaid A. Abdul Hassain
Keyword(s):  
Patch Antenna ◽  
Ring Resonator ◽  
Coplanar Waveguide ◽  
Stop Band ◽  
Split Ring Resonator ◽  
Substrate Material ◽  
Ultra Wideband ◽  
Dual Band ◽  
Split Ring ◽  
Ieee 802.11A

This paper presents an ultra-wideband tapered slot patch antenna with bi-directional radiation, reconfigurable for dual band-notched capability and fed by coplanar waveguide. The proposed antenna showed excellent ultra-wideband characteristics with bandwidth of (1.9–12 GHz). In order to reduce the interference of the narrow band communications represented by Worldwide Interoperability for Microwave Access radiation in the range (3.4–3.9) GHz and standard IEEE 802.11a. application (from 5.1 GHz to 6.1 GHz), the antenna was accompanied with adjustable dual-stop band capability in these bands. The dual-band notches are achieved with aid of inserting a parasitic single split ring resonator and etching a single circular complementary circle split ring resonator. The proposed antenna used epoxy (FR4) substrate material with ????r= 4.4 and dimensions of .

Closed Loop Resonator Based Compact UWB Antenna with Single Notched Band Varying between WLAN and X-band for UWB Applications

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 201-209
Author(s):  
Mohammad Ahmad Salamin ◽  
Sudipta Das ◽  
Asmaa Zugari
Keyword(s):  
Closed Loop ◽  
Ground Plane ◽  
Frequency Range ◽  
Uwb Antenna ◽  
Notched Band ◽  
X Band ◽  
Compact Size ◽  
Simulation Results ◽  
Uwb Applications ◽  
Good Agreement

AbstractIn this paper, a novel compact UWB antenna with variable notched band characteristics for UWB applications is presented. The designed antenna primarily consists of an adjusted elliptical shaped metallic patch and a partial ground plane. The proposed antenna has a compact size of only 17 × 17 mm2. The suggested antenna covers the frequency range from 3.1 GHz to 12 GHz. A single notched band has been achieved at 7.4 GHz with the aid of integrating a novel closed loop resonator at the back plane of the antenna. This notched band can be utilized to alleviate the interference impact with the downlink X-band applications. Besides, a square slot was cut in the loop in order to obtain a variable notched band. With the absence and the existence of this slot, the notched band can be varied to mitigate interference of the upper WLAN band (5.72–5.82 GHz) and X-band (7.25–7.75 GHz) with UWB applications. A good agreement between measurement and simulation results was achieved, which affirms the appropriateness of this antenna for UWB applications.

scholarly journals A Band-Rejection Vivaldi Antenna with High Selectivity Using Hybrid HRW/CCLL

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Mengfei Xiong ◽  
Junping Duan ◽  
Binzhen Zhang
Keyword(s):  
Frequency Band ◽  
Design Method ◽  
Directional Pattern ◽  
Impedance Bandwidth ◽  
Ieee 802.11A ◽  
Notch Band ◽  
Notched Band ◽  
Half Wavelength ◽  
Measurement Results ◽  
Vivaldi Antenna

A simplified notched design method for the Vivaldi antenna is exhibiting high frequency-band-selectivity characteristics. By suitably introducing half-wavelength resonator (HWR) and complementary capacitively loaded loop (CCLL), the notched-band selectivity is promoted while maintaining the wide impedance bandwidth of the antenna applicable for wireless communications. HWR is bent in the middle to focus the first notch pole, and the second notch pole is obtained by CCLL on the radiating patch. Additionally, the resonant frequency of the notched pole can be determined by the position and size of two loaded resonators in theoretical analysis, thereby realizing a wideband antenna with the desired notched band. Finally, the Vivaldi antenna of loading resonator was fabricated to verify the feasibility of this new method. Measured and simulated experimental results reveal that the antenna exhibits directional pattern in the passband, low gain at the band-rejection, and excellent selectivity within a frequency range. The simulation and measurement results are in good agreement. The proposed antenna achieves S11<−10 dB in 2.6–13.7 GHz and a notch band from 4.49 to 6.64 GHz to reject IEEE 802.11a and HIPERLAN/2 frequency band. Moreover, the proposed antenna has good frequency selectivity, and its gain is good enough in the passband with peak gain up to 10.8 dBi. This antenna design presents frequency suitability, demonstrating that a UWB antenna with a controllable notched band has been realized.

A Novel Design of Frequency Reconfigurable Antenna for UWB Application

Frequenz ◽  
2016 ◽  
Vol 70 (9-10) ◽  
Author(s):  
Xiaolin Yang ◽  
Ziliang Yu ◽  
Zheng Wu ◽  
Huajiao Shen
Keyword(s):  
Frequency Band ◽  
Dual Band ◽  
Reconfigurable Antenna ◽  
Pin Diodes ◽  
Notched Band ◽  
Uwb Applications ◽  
Novel Design ◽  
Frequency Reconfigurable Antenna

AbstractIn this paper, we present a novel frequency reconfigurable antenna which could be easily operate in a single notched-band (WiMAX (3.3–3.6 GHz)) UWB frequency band, another single notched-band (WLAN (5–6 GHz)) UWB frequency band and the dual band-notched UWB frequency band (the stopband covers the WiMAX (3.3–3.6 GHz) and WLAN (5–6 GHz)). The reconfigurability is achieved by changing the states of PIN diodes. The simulated results are in agreement well with the measured results. And the measured patterns are slightly changed with antenna reconfiguration. The proposed antenna is a good candidate for various UWB applications.

scholarly journals A Compact UWB Antenna with a Quarter-Wavelength Strip in a Rectangular Slot for 5.5 GHz Band Notch

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Pichet Moeikham ◽  
Chatree Mahatthanajatuphat ◽  
Prayoot Akkaraekthalin
Keyword(s):  
Frequency Band ◽  
Communication Systems ◽  
Notch Filter ◽  
Radiation Patterns ◽  
Frequency Range ◽  
Uwb Antenna ◽  
Antenna Structure ◽  
Rectangular Slot ◽  
Quarter Wavelength ◽  
Uwb Applications

The limitation of the electromagnetic interferences (EMIs) caused by UWB radiating sources into WLAN/WiMAX communication systems operating in the frequency band located around 5.5 GHz requires the adoption of appropriate design features. To this purpose, a notch filter integrated into an UWB antenna, which is able to ensure a better electrical insulation between the two mentioned communication systems with respect to that already presented by the authors Moeikham et al. (2011), is proposed in this paper. The proposed filter, consisting in a rectangular slot including a quarter-wavelength strip integrated on the lower inner edge of the UWB radiating patch, is capable of reducing the energy emission in the frequency range between 5.1 and 5.75 GHz resulting in lower EMIs with sensible electronic equipments working in this frequency band. The antenna structure has no need to be tuned after inserting the rectangle slot with a quarter-wavelength strip. The proposed antenna has potential to minimize the EMIs at a frequency range from 5.1 to 5.75 GHz. The radiation patterns are given nearly omnidirectional in plane and likely bidirectional in plane at all frequencies by the proposed antenna. Therefore, this antenna is suitable to apply for various UWB applications.

scholarly journals A Compact UWB Antenna with Independently Controllable Notch Bands

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1411 ◽  
Author(s):  
Amjad Iqbal ◽  
Amor Smida ◽  
Nazih Mallat ◽  
Mohammad Islam ◽  
Sunghwan Kim
Keyword(s):  
Group Delay ◽  
Ultra Wideband ◽  
Frequency Range ◽  
Uwb Antenna ◽  
Wireless System ◽  
Radiation Characteristics ◽  
Notched Band ◽  
Radiating Element ◽  
Wide Range ◽  
Shaped Section

A minimally-sized, triple-notched band ultra-wideband (UWB) antenna, useful for many applications, is designed, analyzed, and experimentally validated in this paper. A modified maple leaf-shaped main radiating element with partial ground is used in the proposed design. An E-shaped resonator, meandered slot, and U-shaped slot are implemented in the proposed design to block the co-existing bands. The E-shaped resonator stops frequencies ranging from 1.8–2.3 GHz (Advanced Wireless System (AWS1–AWS2) band), while the meandered slot blocks frequencies from 3.2–3.8 GHz (WiMAX band). The co-existing band ranging from 5.6–6.1 GHz (IEEE 802.11/HIPERLANband) is blocked by utilizing the U-shaped section in the feeding network. The notched bands can be independently controlled over a wide range of frequencies using specific parameters. The proposed antenna is suitable for many applications because of its flat gain, good radiation characteristics at both principal planes, uniform group delay, and non-varying transfer function ( S 21 ) for the entire UWB frequency range.

Sign in / Sign up

Export Citation Format

Share Document