scholarly journals Direct Preparation and Characterization of Copper Pentacyanonitrosylferrate Nanoparticles

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
D. R. Do Carmo ◽  
M. M. Souza ◽  
U. O. Bicalho ◽  
V. S. Dos Santos ◽  
J. P. Souza ◽  
...  

The present work describes the preparation of nanoparticles of copper pentacyanonitrosyl complexes starting from the compound sodium nitroprusside. Copper pentacyanonitrosylferrate (NCuNP) nanoparticles were successfully synthesized by using deionized water and formamide as solvent. The material was characterized by Fourier-transforming infrared spectroscopy (FT-IR), X-ray diffraction (XRD), ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and cyclic voltammetry (CV). The results revealed that the electronic spectra of NCuNP exhibited a broad intervalence charge transfer band at 685 nm. An XRD peak broadening pattern of the NCuNP was verified, indicating a particle decrease when formamide is used. The particle size of NCuNP is estimated to be 80 nm. The cyclic voltammogram of the modified graphite paste electrode with NCuNP showed two redox pairs with formal potentialsEθ′=0.36 V andEθ′=0.78 V (ν=20 mV s−1; KCl 1.0 M), attributed to the redox processCuI/CuIIand [FeII(CN)5NO]/[FeIII(CN)5NO], respectively. The graphite paste electrode with NCuNP presents electrocatalytic response for Sulfite determination.

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
D. R. do Carmo ◽  
S. Gabriel ◽  
D. R. Silvestrini ◽  
U. O. Bicalho ◽  
L. R. Cumba

Poly(propylene)imine hexadecylamine dendrimer (DAB-Am-16) was anchored on the surface of 3-chloropropylsilyl silica gel and subsequently interacted with copper nitroprusside. The composite was characterized by infrared (FTIR), energy dispersive X-ray (EDX), and cyclic voltammetry. The above techniques confirmed the successful anchoring of the dendrimer on the silica gel modified surface and its interaction with copper nitroprusside. The cyclic voltammogram of CuNPSD was found to exhibit two redox couples with (Eθ′)1= 0.30 V and (Eθ′)2= 0.78 V versus Ag/AgCl ( mol L−1;  mV s−1) attributed to the redox processes and , respectively. The CuNPSD-modified graphite paste electrode was found to show a linear response of to  mol L−1for nitrite determination with a detection limit (DL) of  mol L−1and an amperometric sensitivity of 25.0 mA/mol L−1. The CuNPSD-modified graphite paste electrode was found to show a good electrochemical stability and an excellent response to the electrocatalytic oxidation of sodium nitrite.


1995 ◽  
Vol 382 ◽  
Author(s):  
Martin Pehnt ◽  
Douglas L. Schulz ◽  
Calvin J. Curtis ◽  
Helio R. Moutinho ◽  
Amy Swartzlander ◽  
...  

ABSTRACTIn this article we report the first nanoparticle-derived route to smooth, dense, phase-pure CdTe thin films. Capped CdTe nanoparticles were prepared by injection of a mixture of Cd(CH3)2, (n-C8H17)3 PTe and (n-C8H17)3P into (n-C8H17)3PO at elevated temperatures. The resultant nanoparticles 32-45 Å in diameter were characterized by x-ray diffraction, UV-Vis spectroscopy, transmission electron microscopy, thermogravimetric analysis and energy dispersive x-ray spectroscopy. CdTe thin film deposition was accomplished by dissolving CdTe nanoparticles in butanol and then spraying the solution onto SnO2-coated glass substrates at variable susceptor temperatures. Smooth and dense CdTe thin films were obtained using growth temperatures approximately 200 °C less than conventional spray pyrolysis approaches. CdTe films were characterized by x-ray diffraction, UV-Vis spectroscopy, atomic force microscopy, and Auger electron spectroscopy. An increase in crystallinity and average grain size as determined by x-ray diffraction was noted as growth temperature was increased from 240 to 300 °C. This temperature dependence of film grain size was further confirmed by atomic force microscopy with no remnant nanocrystalline morphological features detected. UV-Vis characterization of the CdTe thin films revealed a gradual decrease of the band gap (i.e., elimination of nanocrystalline CdTe phase) as the growth temperature was increased with bulk CdTe optical properties observed for films grown at 300 °C.


2012 ◽  
Vol 67 (6) ◽  
pp. 549-556 ◽  
Author(s):  
Günter Margraf ◽  
Frauke Schödel ◽  
Inge Sänger ◽  
Michael Bolte ◽  
Matthias Wagner ◽  
...  

The bis(trimethyl)silylamido complex Na(THF){Fe[N(SiMe3)2]3} and the disilane tBu3SiSitBu3 were obtained from the reaction of Fe[N(SiMe3)2]3 with the sodium silanide Na(THF)2[SitBu3] in a mixture of benzene and THF. Single crystals of Na(THF){Fe[N(SiMe3)2]3} suitable for X-ray diffraction were grown from the reaction solution at ambient temperature (orthorhombic, C2221, Z = 4). The solid-state structure features a contact-ion pair with two short N-Na contacts. The THF adducts {M(THF)2[N(SiMe3)2]2} reacted with 2,2´-bipyridine to give the corresponding complexes {M(2,2´bipy)[N(SiMe3)2]2} (M= Mn; Fe). Their structures (M= Fe: orthorhombic, Pca21, Z = 8; M = Mn: orthorhombic, Pbca, Z = 8) feature monomeric units. The cyclic voltammogram of Fe[N(SiMe3)2]3 revealed a reversible redox transition with the potential of -0;523 V (E½), which was assigned to the Fe(III)[N(SiMe3)2]3 → Fe(II)[N(SiMe3)2]-3 redox transition, whereas the compounds {Fe(THF)2[N(SiMe3)2]2} (Eox = -0;379 V) and {Fe(2,2´bipy)[N(SiMe3)2]2} (Eox = -0;436 V) featured irreversible oxidation waves. The related manganese bis(trimethylsilyl)amido complexes {Mn(THF)2[N(SiMe3)2]2} (Eox = -0;458 V) and {Mn(2,2´bipy)[N(SiMe3)2]2} (Eox = -0513 V) also underwent irreversibile electron transfer processes.


Author(s):  
Mateusz Gołdyn ◽  
Anna Komasa ◽  
Mateusz Pawlaczyk ◽  
Aneta Lewandowska ◽  
Elżbieta Bartoszak-Adamska

The study of various forms of pharmaceutical substances with specific physicochemical properties suitable for putting them on the market is one of the elements of research in the pharmaceutical industry. A large proportion of active pharmaceutical ingredients (APIs) occur in the salt form. The use of an acidic coformer with a given structure and a suitable pK a value towards purine alkaloids containing a basic imidazole N atom can lead to salt formation. In this work, 2,6-dihydroxybenzoic acid (26DHBA) was used for cocrystallization of theobromine (TBR) and caffeine (CAF). Two novel salts, namely, theobrominium 2,6-dihydroxybenzoate, C7H9N4O2 +·C7H5O4 − (I), and caffeinium 2,6-dihydroxybenzoate, C8H11N4O2 +·C7H5O4 − (II), were synthesized. Both salts were obtained independently by slow evaporation from solution, by neat grinding and also by microwave-assisted slurry cocrystallization. Powder X-ray diffraction measurements proved the formation of the new substances. Single-crystal X-ray diffraction studies confirmed proton transfer between the given alkaloid and 26DHBA, and the formation of N—H...O hydrogen bonds in both I and II. Unlike the caffeine cations in II, the theobromine cations in I are paired by noncovalent N—H...O=C interactions and a cyclic array is observed. As expected, the two hydroxy groups in the 26DHBA anion in both salts are involved in two intramolecular O—H...O hydrogen bonds. C—H...O and π–π interactions further stabilize the crystal structures of both compounds. Steady-state UV–Vis spectroscopy showed changes in the water solubility of xanthines after ionizable complex formation. The obtained salts I and II were also characterized by theoretical calculations, Fourier-transform IR spectroscopy (FT–IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and elemental analysis.


2012 ◽  
Vol 31 (1) ◽  
pp. 79
Author(s):  
Khalil Faghihi ◽  
Masoumeh Soleimani ◽  
Shabnam Nezami ◽  
Meisam Shabanian

Two new samples of poly(amide-imide)-montmorillonite reinforced nanocomposites containing N-trimellitylimido-L-valine moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide-imide) (PAI) 5 as a source of polymer matrix was synthesized by the direct polycondensation reaction of N-trimellitylimido-L-valine (3) with 4,4′-diaminodiphenyl ether 4 in the presence of triphenyl phosphite (TPP), CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP). Morphology and structure of the resulting PA-nanocomposite films (5a) and (5b) with 10 and 20 % silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposite films were investigated by using Uv-vis spectroscopy,  thermogravimetric analysis (TGA) and water uptake measurements.


2020 ◽  
Author(s):  
Viktoria Leonhardt ◽  
Stefanie Fimmel ◽  
Ana-Maria Krause ◽  
Florian Beuerle

<div><div><div><p>A trigonal-bipyramidal covalent organic cage compound serves as an efficient host to form stable 1:1-complexes with C60 and C70. Fullerene encapsulation has been comprehensively studied by NMR and UV/Vis spectroscopy, mass spectrometry as well as single-crystal X-ray diffraction. Exohedral functionalization of encapsulated C60 via threefold Prato reaction revealed high selectivity for the symmetry-matched all-trans-3 addition pattern.</p></div></div></div>


BioResources ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. 1548-1560
Author(s):  
Daniel Garcia-Bedoya ◽  
Luis P. Ramírez-Rodríguez ◽  
Jesús M. Quiroz-Castillo ◽  
Edgard Esquer-Miranda ◽  
Arnulfo Castellanos-Moreno

Algae constitute a diverse group that is useful in many biotechnological areas. In this paper, the usefulness of Caulerpa sertularioides methanol extract in the synthesis of ZnO and Zn(OH)2 nanoparticles was explored. This work had two main objectives: (1) to use the extract in the synthesis as an organic harmless complexing agent, and (2) to enhance a photocatalytic effect over AZO dyes in wastewater from fabric industries without adding nanomaterial to the environment due to its toxicity. Caulerpa extract performed the expected complexing action, and nanoparticles were formed in a size range from 45 to 69 nm. X-ray diffraction analysis (XRD), transmission electron microscopy (TEM) and UV-Vis spectroscopy were used to characterize the system. It was demonstrated that the nanoparticles were useful to photocatalyst AZO dyes in the water, while contained in tetraethylorthosilicate composites. These could be used in industrial wastewater and are expected to have no environmental consequences because the composites do not add nanoparticles to the water.


2014 ◽  
Vol 2 (4) ◽  
pp. 510-515
Author(s):  
Hala Moustafa Ahmed

The present study mainly focuses of combined action of Nepali hog plum as well as citrate synthesized silver nanoparticles (AgNPs) and Amikacin, as an antibiotic. The synergistic actions of citrate stabilized silver nanoparticles (AgNPs with chem) were compared with that of Nepali hog plum Choerospondia saxillaris (Lapsi) synthesized silver nanoparticles (AgNPs with plant), together with action of antibiotic onselected bacterial strains of Salmonella typhi. The synthesized AgNPs were characterized through UV-Vis spectroscopy, Transmission electronmicroscopy and X-ray diffraction technique. The size of the synthesized silver nanoparticles was measured by Transmission Electron Microscope (TEM) and X-ray diffraction (XRD).DOI: http://dx.doi.org/10.3126/ijasbt.v2i4.11127 Int J Appl Sci Biotechnol, Vol. 2(4): 510-515 


2021 ◽  
Vol 68 (1) ◽  
pp. 102-108
Author(s):  
Yu-Mei Hao

A mononuclear copper(II) complex, [CuL] (1), and a phenolato-bridged trinuclear zinc(II) complex, [Zn3Cl2L2(DMF)2] (2), where L is the deprotonated form of N,N’-bis(4-bromosalicylidene)propane-1,3-diamine (H2L), have been prepared and characterized by elemental analyses, IR and UV-Vis spectroscopy, and single crystal X-ray diffraction. The Cu atom in complex 1 is in square planar coordination, while the terminal and central Zn atoms in complex 2 are in square pyramidal and octahedral coordination, respectively. The antibacterial activities of the complexes have been tested on the bacteria Staphylococcus aureus and Escherichia coli, and the yeast Candida parapsilosis.


Sign in / Sign up

Export Citation Format

Share Document