scholarly journals Physical Characteristics of Amorphous and Crystalline Coconut Sugar Powder with the Addition of Tricalcium Phosphate (TCP) as an Anticaking Agent

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Bambang Nurhadi ◽  
Nandi Sukri ◽  
Rudy Adi Saputra ◽  
Fatonah Isnaini Wandhani ◽  
Afifah Indah Nurlita
Keyword(s):  
Conventional Method ◽  
Tricalcium Phosphate ◽  
Water Sorption ◽  
Sugar Content ◽  
Amorphous Structure ◽  
Physical Characteristics ◽  
Vacuum Drying ◽  
Drying Method ◽  
High Sugar Content ◽  
Sugar Powder

The coconut sugar powder produced by vacuum drying and conventional method has high hygroscopicity due to its high sugar content (mostly sucrose). Therefore, it is easier for caking to occur during storage. An anticaking agent such as tricalcium phosphate was therefore added to the powder to maintain its stability. The purpose of this research was to determine the physical characteristics of amorphous and crystalline coconut sugar after the addition of tricalcium phosphate (TCP) in different concentrations. The two types of coconut sugar were prepared by the conventional method, which gave it a predominantly crystalline structure, and the vacuum drying method, which gave it a mainly amorphous structure. The TCP at concentrations 0, 0.5%, and 1% was added to both types of the coconut sugar. The addition of the anticaking agent affected the water sorption of coconut sugar by decreasing the monolayer water content for both types of coconut sugar. TCP seemed to give more significant effect on decreasing the hygroscopicity of crystalline coconut sugar than the amorphous one, while similar trends were obtained in increasing flow ability of both types of coconut sugar. The capacity of TCP to cover the surface of the host coconut powder was proposed as the mechanism of TCP in decreasing hygroscopicity and increasing flow ability of the host powder.

Harvest Field Sizing as a Technique to Remove Undersize French Prunes

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 452a-452
Author(s):  
Richard Buchner ◽  
Seeley Mudd ◽  
Bruce Carroll ◽  
Mark Gilles
Keyword(s):  
Sugar Content ◽  
Economic Value ◽  
Market Value ◽  
Dry Weight ◽  
Soluble Solids ◽  
Field Size ◽  
Test Machine ◽  
Test Field ◽  
Marginal Value ◽  
High Sugar Content

Overall profitability is a major goal in successful prune production and a major component in any prune management system. Large prune crops in 1996 and 1997 have stimulated considerable interest in undersize fruit. Undersize prunes currently have marginal value and may represent a net loss because of costs to haul, dry, and to market order payments on low value prunes. One technique to control delivery size is to field size at harvest. Field sizing involves installing size-sorting devices on harvesters, which allow small prunes to fall out while valuable fruit is collected. Field sizing is considered a “risky” strategy because of the potential to remove prunes with economic value. During the 1997 harvest, 21 infield harvest sizing evaluations were made in prune orchards throughout Tehama county. The first evaluation occurred on 12 Aug. 1997, at the start of prune harvest. The final evaluation was done on 5 Sept. 1997, at the tail end of harvest. The objective was to sample throughout the harvest period to test field sizing under various sugar, size, and fruit pressure scenarios. The test machine was 1-inch bar sizer. Of the 21 sample dates, undersize fruit was clearly not marketable in 20 of the 21 samples. Discarded fruit averaged 133 dry count per pound. Only one sample out of 21 may have had market value at 86 dry count per pound. Although small in size, these prunes had very high sugar content contributing to their dry weight. In this evaluation, a 1-inch bar sizer did a good job of separating fruit with and without market value under the 1997 price schedule. As harvest date becomes later and soluble solids increase, the chances of sorting out marketable prunes also increases.

scholarly journals The “Zero Miles Product” Concept Applied to Biofuel Production: A Case Study

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 565
Author(s):  
Nikolaj Kaae Kirk ◽  
Clara Navarrete ◽  
Jakob Ellegaard Juhl ◽  
José Luis Martínez ◽  
Alessandra Procentese
Keyword(s):  
Sugar Content ◽  
Point Of View ◽  
Biofuel Production ◽  
Transport Costs ◽  
Economic Point ◽  
Product Concept ◽  
Energy Demands ◽  
Production Platform ◽  
High Sugar Content

To make biofuel production feasible from an economic point of view, several studies have investigated the main associated bottlenecks of the whole production process through approaches such as the “cradle to grave” approach or the Life Cycle Assessment (LCA) analysis, being the main constrains the feedstock collection and transport. Whilst several feedstocks are interesting because of their high sugar content, very few of them are available all year around and moreover do not require high transportation’ costs. This work aims to investigate if the “zero miles” concept could bring advantages to biofuel production by decreasing all the associated transport costs on a locally established production platform. In particular, a specific case study applied to the Technical University of Denmark (DTU) campus is used as example to investigate the advantages and feasibility of using the spent coffee grounds generated at the main cafeteria for the production of bioethanol on site, which can be subsequently used to (partially) cover the campus’ energy demands.

Tailoring the physical characteristics of solution blown cellulosic nonwovens by various post-treatments

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Kerstin Jedvert ◽  
Linnea Viklund ◽  
Mårten Alkhagen ◽  
Tobias Köhnke ◽  
Hans Theliander
Keyword(s):  
Ionic Liquid ◽  
Physical Characteristics ◽  
Direct Solution ◽  
Post Processing ◽  
Drying Method ◽  
Solution Blowing ◽  
Renewable Feedstock ◽  
Processing Steps

Abstract Nonwovens are increasing in demand due to their versatility which enables use in a broad range of applications. Most nonwovens are still produced from fossil-based resources and there is thus a need to develop competitive materials from renewable feedstock. In this work, nonwovens are produced from cellulose via a direct solution blowing method. Cellulose was dissolved using the ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIMAc) and was regenerated into nonwovens by coagulation in water. The properties of such nonwovens were previously rather stiff and papery-like and the aim of this work was to improve the softness and feel of the materials by simple adjustments of the post-processing steps, i. e. washing and drying. It was shown that by primarily changing the drying method, it was possible to create a much softer and bulkier material using the same solution blowing parameters.

scholarly journals Evaluation of Innovative Dried Purée from Jerusalem Artichoke—In Vitro Studies of Its Physicochemical and Health-Promoting Properties

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2644
Author(s):  
Jan Oszmiański ◽  
Sabina Lachowicz ◽  
Paulina Nowicka ◽  
Paweł Rubiński ◽  
Tomasz Cebulak
Keyword(s):  
Freeze Drying ◽  
Jerusalem Artichoke ◽  
Polyphenolic Compounds ◽  
Raw Material ◽  
Vacuum Drying ◽  
Drying Methods ◽  
Drying Method ◽  
Activity Inhibition ◽  
Health Promoting

The present study aimed to evaluate the effect of Jerusalem artichoke processing methods and drying methods (freeze drying, sublimation drying, vacuum drying) on the basic physicochemical parameters, profiles and contents of sugars and polyphenolic compounds, and health-promoting properties (antioxidant activity, inhibition of the activities of α-amylase, α-glucosidase, and pancreatic lipase) of the produced purée. A total of 25 polyphenolic compounds belonging to hydroxycinnamic phenolic acids (LC-PDA-MS-QTof) were detected in Jerusalem artichoke purée. Their average content in the raw material was at 820 mg/100 g dm (UPLC-PDA-FL) and was 2.7 times higher than in the cooked material. The chemical composition and the health-promoting value of the purées were affected by the drying method, with the most beneficial values of the evaluated parameters obtained upon freeze drying. Vacuum drying could offer an alternative to freeze drying, as both methods ensured relatively comparable values of the assessed parameters.

Seven-year trends in the availability, sugar content and serve size of single-serve non-alcoholic beverages in New Zealand: 2013–2019

2020 ◽  
pp. 1-13
Author(s):  
Teresa Gontijo de Castro ◽  
Helen Eyles ◽  
Cliona Ni Mhurchu ◽  
Leanne Young ◽  
Sally Mackay
Keyword(s):  
New Zealand ◽  
Sugar Content ◽  
Food Composition ◽  
Soft Drinks ◽  
Alcoholic Beverages ◽  
Slight Reduction ◽  
Cross Sectional ◽  
Sweetened Beverages ◽  
Sugary Drinks ◽  
High Sugar Content

Abstract Objective: To assess trends in relative availability, sugar content and serve size of ready-to-drink non-alcoholic beverages available for sale in supermarkets from 2013 to 2019. Design: Repeat cross-sectional surveys. Data on single-serve beverages to be consumed in one sitting were obtained from an updated brand-specific food composition database. Trends in beverages availability and proportions with serve size ≤ 250 ml were assessed by χ2 tests. Sugar content trends were examined using linear regressions. The proportion of beverages exceeding the sugar threshold of the United Kingdom Soft Drinks Industry Levy (SDIL) was assessed. Setting: New Zealand. Results: From 2013 to 2019, there was (i) an increase in the availability of sugar-free/low-sugar beverages (n 25 (8·4 %) to n 75 (19·1 %); P < 0·001) and craft sugar-sweetened soft drinks (n 11 (3·7 %) to n 36 (9·2 %); P < 0·001), and a decrease in availability of fruit/vegetable juices/drinks (n 94 (31·8 %) to n 75 (19·4 %); P < 0·001); (ii) small decreases in sugar content (mean g/100 ml) of sugar-sweetened soft drinks (3·03; 95 % CI 3·77, 2·29); fruit/vegetable juices/drinks (1·08; 95 % CI 2·14, 0·01) and energy drinks (0·98; 95 % CI 1·63, 0·32) and (iii) slight reduction in the proportion of beverages with serve size ≤ 250 ml (21·6 to 18·9 %; P < 0·001). In 2019, most beverages were sugar-sweetened or had naturally occurring sugars (79·1 %) and serve size > 250 ml (81·1 %) and most sugar-sweetened beverages exceeded the SDIL lower benchmark (72·9 %). Conclusions: Most single-serve beverages available for sale in 2019 were sugary drinks with high sugar content and large serve sizes; therefore, changes made across the years were not meaningful for population’s health.

Feasibility of utilizing sweet potato solids in extrusion cooking / Extrusión de pulpa de batata

1997 ◽  
Vol 3 (3) ◽  
pp. 171-174 ◽  
Author(s):  
H.M. Khalil ◽  
B.R. Henry
Keyword(s):  
Moisture Content ◽  
Sweet Potato ◽  
Sugar Content ◽  
Expansion Ratio ◽  
Fractional Factorial ◽  
Snack Food ◽  
Screw Speed ◽  
High Sugar Content ◽  
Feed Moisture ◽  
Best Parameter

A fractional factorial design of four variables at two levels each was employed to assess the feasi bility and best parameter for extruding sweet potato solids (SPS) using a single screw extruder. It was determined that a high expansion ratio is a desired quality factor for this type of snack food, due to its contribution to textural perception. Preliminary trials on extrusion of sweet potato solids as the sole component in the feed resulted in brittle, dense, and burnt extrudate. The high sugar content (65% total sugar) of the sweet potato solids was cited as the cause of these attrib utes, consequently it was necessary to incorporate wheat flour into the feed to provide a starch matrix for expansion and to reduce sugar concentration. The controlled parameters were screw speed, barrel temperature, feed moisture content, and SPS level in the feed. Among all possible combinations of controlled parameters, the highest expansion ratio was obtained at a screw speed of 220 rpm, temperature profile of 110, 105, 115 and 105 °C, 13% feed moisture content, 50% sweet potato solids, and 0.5% leavening agent.

Productivity of binary herbage based on non-traditional forage crops in the Upper Volga region

2021 ◽  
Author(s):  
N. V. Shmeleva ◽  
Keyword(s):  
Species Composition ◽  
Sugar Content ◽  
Field Studies ◽  
Volga Region ◽  
Forage Crops ◽  
High Sugar ◽  
Upper Volga ◽  
High Sugar Content ◽  
The Upper Volga Region

The article presents the results of field studies aimed at expanding the species composition of herbs and the search for adaptive cereals with a high sugar content in the Upper Volga region in 2015-2020.

scholarly journals Effects of sudden melon intake on ruminal parameters of non-adapted sheep

2016 ◽  
Vol 36 (5) ◽  
pp. 378-382 ◽  
Author(s):  
Francisco L.C. Oliveira ◽  
Raimundo A. Barrêto Júnior ◽  
Antonio H.H. Minervino ◽  
Marcondes Dias Tavares ◽  
Rodolfo Gurgel Vale ◽  
...  
Keyword(s):  
Volatile Fatty Acid ◽  
Dry Matter ◽  
Sugar Content ◽  
The Other ◽  
Ruminal Fluid ◽  
Ruminal Acidosis ◽  
Rumen Ph ◽  
Lactic Acid Content ◽  
High Sugar Content ◽  
High Lactate

Abstract: This study evaluated the effects of varying amounts of melon with high sugar content offered to sheep without prior melon experience and that were not adapted to consuming it. We used 12 eight-month-old, rumen-cannulated crossbred sheep weighing 25 kg each. The animals received a base diet of roughage, and then half were randomly selected to have 25% of their diet replaced with melon (G25%) and the other half had 75% of their diet replaced with melon (75%). Ruminal fluid was collected before administration of melon and at 0, 3, 6, 12, 18, and 24 h after the administration of the fruit. Sheep from the G25% group presented volatile fatty acid ruminal acidosis (sub-acute) between 3 and 6 h after consumption. This acidosis was characterized by a rumen pH slightly lower than 5.6, increased discrete L-lactic acid content, and increased redox potential (RP) and methylene blue redox (MBR) time of the ruminal fluid. The G75% group presented lactic ruminal acidosis at T6h, characterized by a rumen pH lower than 5.0, high lactate-L content, increased RP and MBR time, and increased ruminal fluid osmolarity. Therefore, offering large amounts of melon (75% of dry matter (DM)) is not recommended but 25% of DM of this fruit can be used safely.

Enhancement of Sugar Content through Progressive Freeze Concentration: Effect of Initial Concentration

2014 ◽  
Vol 69 (4) ◽  
Author(s):  
Mazura Jusoh ◽  
Noor Naimah Mohamed Nor ◽  
Nurul Aini Amran ◽  
Shafirah Syamsuri
Keyword(s):  
Stainless Steel ◽  
Sugar Content ◽  
K Value ◽  
Initial Concentration ◽  
Freeze Concentration ◽  
Concentration Technique ◽  
High Sugar Content ◽  
Single Block ◽  
Nutritional Compounds ◽  
The Cost

A new concentration technique is required to eliminate portion of water from coconut water (CW) and reduce the cost of storage, handling and shipping. As Progressive Freeze Concentration (PFC) could retain the nutritional compounds, it was applied to concentrate CW and enhance its sugar content. In PFC system, only a single block of ice is formed as a layer on the cooled surface. A coil stainless steel crystallizer was used as FC unit to investigate the enhancement of sugar content in CW. The effect of initial concentration of CW was then investigated on the performance of the PFC system through the Effective Partition Constant (K) value and increment of sugar content. It was found that lower initial concentration yielded lower K, which is favourable and high sugar content. The best K achieved was of 0.3101 and the highest sugar content increment acquired was 53% with the range of initial concentration investigated (3 to 5%Brix).

Analysis of sugars in dwarf mistletoe nectar

1974 ◽  
Vol 52 (12) ◽  
pp. 2533-2538 ◽  
Author(s):  
J. W. Brewer ◽  
K. J. Collyard ◽  
C. E. Lott Jr.
Keyword(s):  
Liquid Chromatography ◽  
Thin Layer ◽  
Sugar Content ◽  
Gas Liquid Chromatography ◽  
Dwarf Mistletoe ◽  
Total Solids ◽  
High Sugar ◽  
Insect Pollinator ◽  
High Sugar Content

Nectar produced by pistillate flowers of the dwarf mistletoe Arceuthobium abietinum Engelm. was analyzed by thin-layer and gas–liquid chromatography. The inconspicuous (0.5–1.5 mm) flowers produce relatively large (0.24 μliter) droplets of highly concentrated nectar (58–92% total solids, expressed as sugars). The major components were glucose (48%), fructose (39%), and sucrose (11%). Traces of other sugars were also present. It is suggested that nectar of this high sugar content is probably a strong insect pollinator attractant, and this, in turn, may be a major factor in the successful spread of the parasitic dwarf mistletoes.

Sign in / Sign up

Export Citation Format

Share Document