scholarly journals Square-Framed T Shape mmwave Antenna Array at 28 GHz for Future 5G Devices

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Saad Hassan Kiani ◽  
Xin Cheng Ren ◽  
Adil Bashir ◽  
Ammar Rafiq ◽  
Muhammad Rizwan Anjum ◽  
...  
Keyword(s):  
Antenna Array ◽  
Linear Array ◽  
Antenna System ◽  
Single Element ◽  
Beam Radiation ◽  
Millimetre Wave ◽  
System A ◽  
Dual Beam ◽  
Compact Size ◽  
5G Systems

In this research, a novel T shape antenna is proposed for millimetre-wave (mmwave) 5G systems. Designed on 0.254 mm thin Roggers 5880 substrate with a dielectric constant of 2.3 and the loss tangent of 0.0009, the proposed antenna offers a wideband characteristics of nearly 8 GHz with gain of 4.25 dBi for single element. Based on these characteristics, the single element is further constructed into a four-element linear array with a compact size of 18.5 × 24 mm2 The proposed antenna array exhibited dual beam radiation patterns with a high realized gain of 11.5 dBi and 94% efficiency. The measured results from the fabricated prototype well agree with the simulated results and thus, therefore, make the proposed antenna system a well-suited candidate for future mmwave devices.

scholarly journals Donut-Shaped mmWave Printed Antenna Array for 5G Technology

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1415
Author(s):  
Mian Muhammad Kamal ◽  
Shouyi Yang ◽  
Saad Hassan Kiani ◽  
Muhammad Rizwan Anjum ◽  
Mohammad Alibakhshikenari ◽  
...  
Keyword(s):  
Antenna Array ◽  
Ground Plane ◽  
Single Element ◽  
Total Efficiency ◽  
Printed Antenna ◽  
Central Frequency ◽  
Ring Shape ◽  
Dual Beam ◽  
High Bandwidth ◽  
Slotted Antenna

This article presents compact and novel shape ring-slotted antenna array operating at mmWave band on central frequency of 28 GHz. The proposed structure designed at 0.256 mm thin Roggers 5880 is composed of a ring shape patch with a square slot etched at the top mid-section of partial ground plane. Through optimizing the ring and square slot parameters, a high bandwidth of 8 GHz is achieved, ranging from 26 to 32 GHz, with a simulated gain of 3.95 dBi and total efficiency of 96% for a single element. The proposed structure is further transformed in a 4-element linear array manner. With compact dimensions of 20 mm × 22 mm for array, the proposed antenna delivers a high simulated gain of 10.7 dBi and is designed in such a way that it exhibits dual beam response over the entire band of interest and simulated results agree with fabricated prototype measurements.

scholarly journals A Novel Hook-Shaped Antenna Operating at 28 GHz for Future 5G mmwave Applications

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 673
Author(s):  
Mian Kamal ◽  
Shouyi Yang ◽  
Saad Kiani ◽  
Daniyal Sehrai ◽  
Mohammad Alibakhshikenari ◽  
...  
Keyword(s):  
Antenna Array ◽  
Communication Systems ◽  
Broad Band ◽  
High Gain ◽  
Single Element ◽  
Total Efficiency ◽  
Potential Candidate ◽  
Next Generation ◽  
Dual Beam ◽  
Element Array

To address atmospheric attenuation and path loss issues in the mmwave portion of the spectrum, high gain and narrow beam antenna systems are essential for the next generation communication networks. This paper presents a novel hook-shaped antenna array for 28 GHz 5G mmwave applications. The proposed antenna was fabricated on commercially available Rogers 5880 substrate with thickness of 0.508 mm and dimensions of 10 × 8 mm2. The proposed shape consists of a circle with an arc-shaped slot on top of it and T-shaped resonating lengths are introduced in order to attain broad band characteristics having gain of 3.59 dBi with radiation and total efficiency of 92% and 86% for single element. The proposed structure is transformed into a four-element array with total size of 26.9 × 18.5 mm2 in order to increase the gain up to 10.3 dBi at desired frequency of interest. The four-element array is designed such that it exhibits dual-beam response over the entire band of interest and the simulated results agree with fabricated prototype measurements. The proposed antenna array, because of its robustness, high gain, and dual-beam characteristics can be considered as a potential candidate for the next generation 5G communication systems.

A Novel Ultrasound Imaging System Based on Endoscopic Array Probe

2012 ◽  
Vol 588-589 ◽  
pp. 1148-1151
Author(s):  
Yun Xia Hao ◽  
Ying Li ◽  
Yi Wang ◽  
Xiao Dong Chen ◽  
Dao Yin Yu
Keyword(s):  
Ultrasound Imaging ◽  
Linear Array ◽  
Imaging System ◽  
Control Unit ◽  
Single Element ◽  
System A ◽  
Array Probe ◽  
Linear Array Probe ◽  
Array Ultrasound

A novel ultrasound imaging system based on endoscopic array probe is presented in this paper. The system utilizes an endoscopic linear-array probe instead of the conventional single-element probe to implement ultrasound scanning in vivo. For the system, a micro linear-array ultrasound probe sized Φ10mm×20mm is firstly designed. And then the excitation circuit, gating circuit and echo receiving and processing circuit are all designed cored by a center control unit FPGA. Finally the research of d/2 focusing algorithm is implemented on the basis of the system. After processed, the gray image of echoes reflected by a glass jar’s wall is obtained and shown on a computer.

Light-weight wideband antenna array with low sidelobes for SAR applications

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Reza Kazemi ◽  
Mohsen Fallah ◽  
Bijan Abbasi ◽  
Seyyed Hossein MohseniArmaki
Keyword(s):  
Antenna Array ◽  
Communication Systems ◽  
Linear Array ◽  
Side Lobe ◽  
Impedance Bandwidth ◽  
Side Lobe Level ◽  
Antenna Element ◽  
Light Weight ◽  
Content Type ◽  
Compact Size

Purpose The purpose of this study is to achieve the low-cost, light-weight and compact antenna array with wide bandwidth and low side lobe levels for synthetic aperture radar (SAR) applications in Ku frequency band. Design/methodology/approach A compact design of a rectangular microstrip patch antenna array using multilayered dielectric structure is presented in Ku-band for advanced broadband SAR systems. In this design, stepped pins are used to connect the microstrip feed lines to the radiating patches. Findings The simulation and fabrication results of the multilayered antenna and a 1×16-element linear array of the antenna with Taylor amplitude distribution in the feeding network are presented. The antenna element has a 10-dB impedance bandwidth of more than 26%, and the linear array shows reduction in bandwidth percentage (about 15.4%). Thanks to Taylor amplitude tapering, the side lobe level (SLL) of the array is lower than −24 dB. The maximum measured gains of the antenna element and the linear array are 7 and 19.2 dBi at the center frequency, respectively. Originality/value In the communication systems, a high gain narrow beamwidth radiation pattern achieved by an array of multiple antenna elements with optimized spacing is a solution to overcome the path loss, atmospheric loss, polarization loss, etc. Also, wideband characteristics and compact size are desirable in satellite and SAR systems. This paper provides the combination of these features by microstrip structures.

scholarly journals A Compact 5G Decoupling MIMO Antenna Based on Split-Ring Resonators

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Ziyu Xu ◽  
Qisheng Zhang ◽  
Linyan Guo
Keyword(s):  
Antenna Array ◽  
Mutual Coupling ◽  
Coupling Effect ◽  
Antenna System ◽  
Ring Resonators ◽  
Split Ring ◽  
Split Ring Resonators ◽  
Mimo Antenna ◽  
Compact Size ◽  
5 Ghz

A compact planar multiple-input multiple-output (MIMO) antenna array for 5G band is proposed in this paper. To improve the isolation of compact microstrip antenna array, this paper mainly presents an electromagnetic resonant ring method for MIMO antenna array. The proposed antenna can cover both the 3.3-3.6 GHz and 4.8-5 GHz bands proposed for the 5G band. The antenna proposed in this paper consists of two symmetrical meandered monopole radiators, grid structures, and a Y-shape element. Two different sizes of split-ring resonators (SRRs) are used to suppress the interference of the coupled signal to the antenna system; thereby it can reduce the mutual coupling effect. The experimental results show that the mutual coupling between the two elements is below -25 dB in both of the bands after adding the SRRs. And this antenna is only 23×19 mm2. Its compact size and structure can be used as a mobile terminal antenna.

scholarly journals Full snapshot reconstruction in hybrid architecture antenna arrays

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Maria Trigka ◽  
Christos Mavrokefalidis ◽  
Kostas Berberidis
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Communication Systems ◽  
Linear Array ◽  
Research Work ◽  
Hybrid Architecture ◽  
Angle Of Arrival ◽  
Music Algorithm ◽  
Array Structures ◽  
Signal Sources

AbstractIn the context of this research work, we study the so-called problem of full snapshot reconstruction in hybrid antenna array structures that are utilized in mmWave communication systems. It enables the recovery of the snapshots that would have been obtained if a conventional (non-hybrid) uniform linear antenna array was employed. The problem is considered at the receiver side where the hybrid architecture exploits in a novel way the antenna elements of a uniform linear array. To this end, the recommended scheme is properly designed so as to be applicable to overlapping and non-overlapping architectures. Moreover, the full snapshot recoverability is addressed for two cases, namely for time-varying and constant signal sources. Simulation results are also presented to illustrate the consistency between the theoretically predicted behaviors and the simulated results, and the performance of the proposed scheme in terms angle-of-arrival estimation, when compared to the conventional MUSIC algorithm and a recently proposed hybrid version of MUSIC (H-MUSIC).

scholarly journals A Graphene-Assembled Film Based MIMO Antenna Array with High Isolation for 5G Wireless Communication

2021 ◽  
Vol 11 (5) ◽  
pp. 2382
Author(s):  
Rongguo Song ◽  
Xiaoxiao Chen ◽  
Shaoqiu Jiang ◽  
Zelong Hu ◽  
Tianye Liu ◽  
...  
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Multiple Input Multiple Output ◽  
Frequency Selective Surface ◽  
Antenna System ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Input Multiple Output ◽  
Alternative Material

With the development of 5G, Internet of Things, and smart home technologies, miniaturized and compact multi-antenna systems and multiple-input multiple-output (MIMO) antenna arrays have attracted increasing attention. Reducing the coupling between antenna elements is essential to improving the performance of such MIMO antenna system. In this work, we proposed a graphene-assembled, as an alternative material rather than metal, film-based MIMO antenna array with high isolation for 5G application. The isolation of the antenna element is improved by a graphene assembly film (GAF) frequency selective surface and isolation strip. It is shown that the GAF antenna element operated at 3.5 GHz has the realized gain of 2.87 dBi. The addition of the decoupling structure improves the isolation of the MIMO antenna array to more than 10 dB and corrects the antenna radiation pattern and operating frequency. The isolation between antenna elements with an interval of 0.4λ is above 25 dB. All experimental results show that the GAF antenna and decoupling structure are efficient devices for 5G mobile communication.

scholarly journals A 300-GHz low-cost high-gain fully metallic Fabry–Perot cavity antenna for 6G terahertz wireless communications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Basem Aqlan ◽  
Mohamed Himdi ◽  
Hamsakutty Vettikalladi ◽  
Laurent Le-Coq
Keyword(s):  
Communication Systems ◽  
Low Cost ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Wireless Communication Systems ◽  
Beam Radiation ◽  
Compact Size ◽  
Fabry Perot ◽  
Operating Bandwidth ◽  
Polarization Level

AbstractA low-cost, compact, and high gain Fabry–Perot cavity (FPC) antenna which operates at 300 GHz is presented. The antenna is fabricated using laser-cutting brass technology. The proposed antenna consists of seven metallic layers; a ground layer, an integrated stepped horn element (three-layers), a coupling layer, a cavity layer, and an aperture-frequency selective surface (FSS) layer. The proposed aperture-FSS function acts as a partially reflective surface, contributing to a directive beam radiation. For verification, the proposed sub-terahertz (THz) FPC antenna prototype was developed, fabricated, and measured. The proposed antenna has a measured reflection coefficient below − 10 dB from 282 to 304 GHz with a bandwidth of 22 GHz. The maximum measured gain observed is 17.7 dBi at 289 GHz, and the gain is higher than 14.4 dBi from 285 to 310 GHz. The measured radiation pattern shows a highly directive pattern with a cross-polarization level below − 25 dB over the whole band in all cut planes, which confirms with the simulation results. The proposed antenna has a compact size, low fabrication cost, high gain, and wide operating bandwidth. The total height of the antenna is 1.24 $${\lambda }_{0}$$ λ 0 ($${\lambda }_{0}$$ λ 0 at the design frequency, 300 GHz) , with a size of 2.6 mm × 2.6 mm. The proposed sub-THz waveguide-fed FPC antenna is suitable for 6G wireless communication systems.

Sign in / Sign up

Export Citation Format

Share Document