scholarly journals Preparation of Mesoporous Biochar from Cornstalk for the Chromium (VI) Elimination by Using One-Step Hydrothermal Carbonation

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Chao Wang ◽  
Jun Xie ◽  
Mingdong Zheng ◽  
Jinbo Zhu ◽  
Changliang Shi
Keyword(s):  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Spectra Analysis ◽  
Chemical Surface ◽  
Chromium Vi ◽  
Pseudo Second Order ◽  
One Step ◽  
The One ◽  
Mesoporous Biochar

Hydrothermal carbon (HTC) was prepared by the one-step hydrothermal method for Cr (VI) removal from wastewater, which was considered a “green chemistry” method. The specific surface area (SBET) of HTC was 85 m2/g with the pore size in range of 2.0–24.0 nm. FT-IR spectra analysis showed that the HTC had abundant chemical surface functional groups. The influence of adsorption parameters such as pH, HTC dosage, Cr (VI) concentration, and contact time on the removal efficiency of Cr (VI) had been investigated. When the initial concentration was 50 mg/L, pH = 6, amount of adsorbent was 0.2 g/50 ml, and adsorption time was 90 min; the Cr (VI) absorbed rate of HTC reached 98%. Batch adsorption experiments indicated that Cr (VI) adsorption data of HTC fitted the Freundlich isothermal and pseudo-second-order kinetic models. Overall, our findings provide a promising material in treatment of Cr (VI)-rich wastewater and give a clear picture of its application, which is worthy of further study.

scholarly journals Adsorption Behaviour of Chromium(VI) onto Surface Modified Sugarcane Waste

2013 ◽  
Vol 28 (1-2) ◽  
pp. 113-122
Author(s):  
Kedar Nath Ghimire ◽  
Deepak Wagle ◽  
Suman Lal Shrestha
Keyword(s):  
Volume Ratio ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Method ◽  
Chromium Vi ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Surface Modified

An effective chemically modified adsorbent based on sugarcane waste has been prepared by treating with concentrated sulphuric acid in 2:1weight/volume ratio. Thus prepared adsorbent has been found to be effective in the adsorption of chromium from aqueous medium. The efficacy of the adsorbent in the removal of chromium was evaluated by batch adsorption method. The effect of initial concentration, contact time and pH of the solution was investigated. The maximum adsorption capacity onto this adsorbent was found to be 195 mg/g at their optimal pH 1 at which unmodified bagasse has only 58 mg/g. The characterization of adsorbent was done by determining surface area and Boehm’s titration method. Freundlich isotherm and pseudo-second order kinetic model gave better explanation of the adsorption process.

scholarly journals Adsorption of chromium (VI) ion using zeolite NaA/Fe3O4 composite derived from rice husk ash

2021 ◽  
Vol 947 (1) ◽  
pp. 012012
Author(s):  
Ngo Truong Ngoc Mai ◽  
Nguyen Thi Anh Thu ◽  
Ngo Truong Bao Trang ◽  
Pham Quoc Phu ◽  
Doan Van Hong Thien ◽  
...  
Keyword(s):  
Rice Husk ◽  
Rice Husk Ash ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Adsorption Parameters ◽  
X Ray ◽  
Chromium Vi ◽  
Zeolite Naa ◽  
Order Kinetic Model

Abstract In this study, zeolite NaA was fabricated from rice husk ash before combining with Fe3O4 to form a magnetic NaA/Fe3O4 composite. NaA/Fe3O4 composite was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), and Brunauer Emmett Teller (BET). The surface area and the pore size of zeolite NaA/Fe3O4 was 24.11 m2.g−1 and 23.04 Å. In addition, batch adsorption studies were carried out for the removal of chromium (VI) ion in aqueous solution. The effects of adsorption parameters, including pH solution, initial concentration of Cr (VI) ions, mass of adsorbent, and contact time were investigated. The maximum equilibrium adsorption capacity of zeolite NaA and NaA/Fe3O4 was 22.554 mg.g−1 and 13.722 mg.g−1, respectively. The pseudo-first order kinetic model fitted well to the experimental data. The regeneration of the adsorbent was also investigated for three cycles.

Nano-ZrO2/TiO2 Impregnated Orange Wood Sawdust and Peach Stone Shell Adsorbents for Cr (VI) Removal

2020 ◽  
Vol 16 (7) ◽  
pp. 880-892
Author(s):  
Şerife Parlayıcı ◽  
Kübra Tuna Sezer ◽  
Erol Pehlivan
Keyword(s):  
Contact Time ◽  
Ph Value ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Wood Sawdust ◽  
Adsorption Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Equilibrium Status

Background: In this work, Cr (VI) adsorption on nano-ZrO2๏TiO2 impregnated orange wood sawdust (Zr๏Ti/OWS) and nano-ZrO2๏TiO2 impregnated peach stone shell (Zr๏Ti/PSS) was investigated by applying different adsorption parameters such as Cr (VI) concentrations, contact time, adsorbent dose, and pH for all adsorbents. Methods: The adsorbents were characterized by SEM and FT-IR. The equilibrium status was achieved after 120 min of contact time and optimum pH value around 2 were determined for Cr (VI) adsorption. Adsorption data in the equilibrium is well-assembled by the Langmuir model during the adsorption process. Results: Langmuir isotherm model showed a maximum adsorption value of OWS: 21.65 mg/g and Zr๏Ti/OWS: 27.25 mg/g. The same isotherm displayed a maximum adsorption value of PSS: 17.64 mg/g, and Zr๏Ti/PSS: 31.15 mg/g. Pseudo-second-order kinetic models (R2=0.99) were found to be the best models for describing the Cr (VI) adsorption reactions. Conclusıon: Thermodynamic parameters such as changes in ΔG°, ΔH°, and ΔS° have been estimated, and the process was found to be spontaneous.

Adsorption of Zn(II) from Aqueous Solutions by Thiol-Functionalized MCM-48

2011 ◽  
Vol 413 ◽  
pp. 148-153 ◽  
Author(s):  
Xue Na Hu ◽  
Ya Han ◽  
Jia Yan Li ◽  
Jun Yan Wu ◽  
Jian Rong Chen ◽  
...  
Keyword(s):  
Ethylene Oxide ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Pluronic P123 ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ethylene Oxide ◽  
Ft Ir ◽  
Poly Ethylene ◽  
Poly Propylene

Thiol-functionalized MCM-48 (SH-MCM-48) was synthesized by co-condensation method, with co-templates of cetyltrimethylammonium bromide (CTAB) and nonionic poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) triblock copolymer (Pluronic P123). The resulting material was characterized by XRD and FT-IR spectrum. The potential of SH-MCM-48 for adsorption Zn (II) from aqueous solution was examined. Batch adsorption studies were carried out to investigate the effect of experimental parameters including pH, metal ions concentration and adsorption time. The maximum adsorption capacities of Zn (II) onto SH-MCM-48 were 30.12, 34.01 and 38.02 mg g-1 at the temperature of 303, 313 and 323K, respectively. The adsorption kinetics data were found to follow the pseudo-second-order kinetic model, and adsorption isotherms were fitted well with Langmuir and Freundlich models. Moreover, the adsorption thermodynamic parameters (△G0, △H0 and △S0) were measured, and indicated that the adsorption was an exothermic and spontaneous process.

Adsorption of Chromium (VI) from Aqueous Solution by Agricultural Waste Derived Activated Carbon

2013 ◽  
Vol 726-731 ◽  
pp. 2100-2106 ◽  
Author(s):  
Hua Zhang ◽  
Xue Hong Zhang ◽  
Yi Nian Zhu ◽  
Shou Rui Yuan
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Agricultural Waste ◽  
Order Kinetic ◽  
Chromium Vi ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Grapefruit Peel ◽  
Pseudo Second Order ◽  
C 30

Activated carbon prepared from grapefruit peel, an agricultural solid waste by-product, has been used for the adsorption of Cr(VI) from aqueous solution. The effects of adsorbent dosage, pH and temperature on adsorption of Cr(VI) were investigated. The maximum adsorption yield was obtained at the initial pH of 3. The dynamical data fit very well with the pseudo-second-order kinetic model and the calculated adsorption capacities (23.98, 24.33 and 24.81 mg/g) were in good agreement with experiment results at 20°C, 30°C and 40 °C for the 100 mg/L Cr(VI) solution. The Freundlich model (R2 values were 0.9198-0.9871) fitted adsorption data better than the Langmuir model. The calculated parameters confirmed the favorable adsorption of Cr(VI) on the activated carbon prepared from grapefruit peel.

scholarly journals Efficient Congo Red Removal Using Porous Cellulose/Gelatin/Sepiolite Gel Beads: Assembly, Characterization, and Adsorption Mechanism

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3890
Author(s):  
Chenlu Jiao ◽  
Die Liu ◽  
Nana Wei ◽  
Jiannan Gao ◽  
Fan Fu ◽  
...  
Keyword(s):  
Congo Red ◽  
Adsorption Mechanism ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Dye Wastewater ◽  
Step Method ◽  
Gel Beads ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Highly Porous

Porous sustainable cellulose/gelatin/sepiolite gel beads were fabricated via an efficient ‘hydrophilic assembly–floating droplet’ two-step method to remove Congo red (CR) from wastewater. The beads comprised microcrystalline cellulose and gelatin, forming a dual network framework, and sepiolite, which acted as a functional component to reinforce the network. The as-prepared gel beads were characterized using FTIR, SEM, XRD, and TGA, with the results indicating a highly porous structure that was also thermally stable. A batch adsorption experiment for CR was performed and evaluated as a function of pH, sepiolite addition, contact time, temperature, and initial concentration. The kinetics and isotherm data obtained were in agreement with the pseudo-second-order kinetic model and the Langmuir isotherm, with a maximum monolayer capacity of 279.3 mg·g−1 for CR at 303 K. Moreover, thermodynamic analysis demonstrated the spontaneous and endothermic nature of the dye uptake. Importantly, even when subjected to five regeneration cycles, the gel beads retained 87% of their original adsorption value, suggesting their suitability as an efficient and reusable material for dye wastewater treatments.

scholarly journals Comparison of adsorptions by rice hull and Lewatit TP 214 of platinum in chloride solution

2013 ◽  
Vol 78 (6) ◽  
pp. 811-826 ◽  
Author(s):  
M.H. Morcali ◽  
B. Zeytuncu ◽  
O. Yucel
Keyword(s):  
Waste Product ◽  
Second Order ◽  
Attenuated Total Reflection ◽  
Rate Equations ◽  
Rice Hull ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Biomass Waste ◽  
Equilibrium Data ◽  
Pseudo Second Order

Rice hull, a biomass waste product, and Lewatit TP 214, a thiosemicarbazide sorbent, were investigated as adsorbents for the adsorption of platinum (IV) ions from synthetically prepared dilute chloroplatinic acid solutions. The rice hull was characterized by Attenuated Total Reflection-Fourier transform infrared spectroscopy (ATR-FTIR). The effects of the different adsorption parameters, sorbent dosage, contact time, temperature and pH of solution on adsorption percentage were studied in detail on a batch sorption. The adsorption equilibrium data were best fitted with the Langmuir isotherm model. The maximum monolayer adsorption capacities, Qmax, at 25?C were found to be 42.02 and 33.22 mg g-1 for the rice hull and Lewatit TP 214, respectively. Thermodynamic calculations using the measured ?H?, ?S? and ?G? values indicate that the adsorption process was spontaneous and exothermic. The pseudo-first-order and pseudo-second-order rate equations were investigated; the adsorption of platinum ions for both sorbents was found to be described by the pseudo-second-order kinetic model. The kinetic rate, k2, using 30 mg sorbent at 25?C was found to be 0.0289 and 0.0039 g min-1 mg-1 for the rice hull and Lewatit TP 214, respectively. The results indicated that the rice hull can be effectively used for the removal of platinum from aqueous solution.

scholarly journals Kinetic and Thermodynamic Studies of Chromium (VI) Sorption by Pure and Carbonized Fluted Pumpkin waste biomass (Telfairia occidentalis Hook F.)

2012 ◽  
Vol 27 ◽  
pp. 11-18
Author(s):  
Timi Tarawou ◽  
Michael Horsfall
Keyword(s):  
Aqueous Solution ◽  
Rate Constants ◽  
Industrial Effluents ◽  
Second Order ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Fluted Pumpkin ◽  
Chromium Vi ◽  
Telfairia Occidentalis ◽  
Pseudo Second Order

The adsorption of chromium (VI) ions from aqueous solution was studied using pure and carbonized fluted pumpkin waste biomass (FPWB). The kinetic data shows a pseudo-first-order mechanism with rate constants of 1.26 × 10-2 and 1.933 × 10-2 mg g-1 min-1 for the pure and carbonized FPWB, respectively. While the pseudo-second-order mechanism has rate constants of 0.93 × 10-1 and 1.33 × 10-1 mg g-1 min-1 for the pure and carbonized waste biomass respectively. The pseudo-second order kinetic model was found to be more suitable for describing the experimental data based on the correlation coefficient values (R2) of 0.9975 and 0.9994 obtained for pure waste biomass (PWB) and carbonized waste biomass (CWB), respectively. The results obtained from this study show that PWB and CWB have very high removal capacity for chromium (VI) from aqueous solution over a range of reaction conditions. Thus, fluted pumpkin waste biomass (Telfairia occidentalis Hook F) is a potential sorbent for the treatment of industrial effluents containing chromium (VI) contaminant.DOI: http://dx.doi.org/10.3126/jncs.v27i1.6436 J. Nepal Chem. Soc., Vol. 27, 2011 11-18Uploaded date: 16 July, 2012

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

2020 ◽  
Vol 81 (6) ◽  
pp. 1114-1129 ◽  
Author(s):  
Jun Wang ◽  
Qinglong Xie ◽  
Ao Li ◽  
Xuejun Liu ◽  
Fengwen Yu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Crosslinking Reaction ◽  
Order Kinetic ◽  
Adsorption Capacities ◽  
Initial Ph ◽  
Ultrasonic Assisted ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

Alkaline deoxygenated graphene oxide as adsorbent for cadmium ions removal from aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1611-1619 ◽  
Author(s):  
Jun Liu ◽  
Hongyan Du ◽  
Shaowei Yuan ◽  
Wanxia He ◽  
Pengju Yan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Alkaline deoxygenated graphene oxide (aGO) was prepared through alkaline hydrothermal treatment and used as adsorbent to remove Cd(II) ions from aqueous solutions for the first time. The characterization results of transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared (FT-IR) spectra indicate that aGO was successfully synthesized. The batch adsorption experiments showed that the adsorption kinetics could be described by the pseudo-second-order kinetic model, and the isotherms equilibrium data were well fitted with the Langmuir model. The maximum adsorption capacity of Cd(II) on aGO was 156 mg/g at pH 5 and T = 293 K. The adsorption thermodynamic parameters indicated that the adsorption process was a spontaneous and endothermic reaction. The mainly adsorption mechanism speculated from FT-IR results may be attributed to the electrostatic attraction between Cd2+ and negatively charged groups (–CO−) of aGO and cation-π interaction between Cd2+ and the graphene planes. The findings of this study demonstrate the potential utility of the nanomaterial aGO as an effective adsorbent for Cd(II) removal from aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document