scholarly journals A Novel Study of Synthesis and Experimental Investigation on Hybrid Biocomposites for Biomedical Orthopedic Application

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
C. V. Subba Rao ◽  
R. Sabitha ◽  
P. Murugan ◽  
S. Rama Rao ◽  
K. Anitha ◽  
...  
Keyword(s):  
Flexural Strength ◽  
Fiber Type ◽  
Natural Fibers ◽  
Weight Ratio ◽  
Dimensional Accuracy ◽  
Fiber Types ◽  
Shore Hardness ◽  
Novel Approach ◽  
Raster Angle ◽  
Feather Fiber

In recent years the biocomposites are highly utilized in the biomedical applications, due to excellent strength as well as weight ratio. A lot of natural fibers, namely, flax, hemp, jute, kenaf, and sisal are cheaply available in colossal amount. Aim of this study, a novel approach, is executed for construction of biomedical orthopedic parts by using mixture of natural fibers. This work handled biocomposites such as flax fiber (FX), chicken feather fiber (CF), kenaf fiber (KF), and rice husk fiber (RH) effectively. From all these composites, four sets of mixed fibers with reinforcement of polylactic acid polymer used for creating orthopedic parts. The hand-lay-based methodology is undertaken for preparation of hybrid biocomposites. Parameters involved for this study are fiber types (KF + RH, RH + FX, FX + CF, and CF + KF), laminate count (2, 4, 6 and 8) infill density (30%, 60%, 90%, and 120%), and raster angle (0/60, 30/120, 50/140, and 70/160). Finding of this work is dimensional accuracy, flexural strength, and shore hardness that are analyzed by L16 orthogonal array. ANOVA statistical analysis is enhanced and enlightens the results of flexural strength and source hardness of the biocomposites. Amongst in four parameters, the fiber type parameter extremely contributes such as 40.50% in the flexural analysis. Similarly, laminate count parameter highly contributes such as 31.01% in the shore hardness analysis.

scholarly journals Influence of Fiber Type on Fiberweb Properties in High-Speed Carding

2004 ◽  
Vol os-13 (2) ◽  
pp. 1558925004os-13
Author(s):  
N. B. Doguc ◽  
Abdelfattah M. Seyam ◽  
William Oxenham
Keyword(s):  
High Speed ◽  
Unit Area ◽  
Fiber Type ◽  
Fixed Number ◽  
Operating Conditions ◽  
Fiber Types ◽  
Novel Approach ◽  
General Data ◽  
Key Parameter

The performance of four different fiber types processed at two different carding speeds of 85 and 120 m/min, under fixed operating conditions, was assessed. The totally novel approach of fixing the fiber diameter was used in the experiments. To serve this purpose, we designed four different fibers. In addition, we fixed the number of fibers per unit area of the carded web so as to create constant carding conditions for all experimental fibers. The fixed number of fibers per unit area was achieved by carding the same number of fibers per unit time for a given speed. We took samples from different parts of the card and analyzed them in order to enumerate the effect of fiber type on cardability. Fiberweb uniformity was regarded as a key parameter for assessing the cardability. Several other web and fiber parameters were measured in order to augment the understanding of the role of fiber type in high-speed carding. In general, data revealed that fiberweb uniformity did not significantly differ among fiber types at the two carding speeds 85 m/min and 120 m/min.

scholarly journals Effect of Casting Position on Mechanical Performance of Ultra-High Performance Concrete

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 404
Author(s):  
Sujing Zhao ◽  
Yiheng Bo
Keyword(s):  
Flexural Strength ◽  
High Performance ◽  
Mechanical Performance ◽  
High Performance Concrete ◽  
Fiber Type ◽  
Peak Load ◽  
Load Ratio ◽  
Fiber Types ◽  
Ultra High Performance Concrete ◽  
Fracture Properties

The mechanical performance of ultra-high performance concrete (UHPC) is a function of fiber distribution and orientation, which are affected by the processing of the fresh material. In this study, the influences of two casting positions (mid-cast and end-cast) on strength and fracture properties of UHPCs with different fiber types and fiber contents were investigated. The results show that mid-cast specimens have higher flexural strength and fracture properties than end-cast specimens, while the compressive strength is almost unaffected by casting position. Compared to specimens with straight fibers, the flexural strength of specimens with hooked-end fibers is more likely to be affected by casting position. The residual load-to-peak load ratio is independent of casting position but affected by fiber type and fiber content.

Resistance to Ca2+-induced opening of the permeability transition pore differs in mitochondria from glycolytic and oxidative muscles

2008 ◽  
Vol 295 (2) ◽  
pp. R659-R668 ◽  
Author(s):  
Martin Picard ◽  
Kristina Csukly ◽  
Marie-Eve Robillard ◽  
Richard Godin ◽  
Alexis Ascah ◽  
...  
Keyword(s):  
Citrate Synthase ◽  
Fiber Type ◽  
Physiological Mechanism ◽  
Permeability Transition Pore ◽  
Permeability Transition ◽  
Fiber Types ◽  
Cyclophilin D ◽  
Novel Approach ◽  
Voltage Dependent ◽  
Ptp Opening

This study determined whether susceptibility to opening of the permeability transition pore (PTP) varies according to muscle phenotype represented by the slow oxidative soleus (Sol) and superficial white gastrocnemius (WG). Threshold for Ca2+-induced mitochondrial Ca2+ release following PTP opening was determined with a novel approach using permeabilized ghost myofibers. Threshold values for PTP opening were approximately threefold higher in fibers from WG compared with those from Sol (124 ± 47 vs. 30.4 ± 6.8 pmol Ca2+/mU citrate synthase). A similar phenomenon was also observed in isolated mitochondria (threshold: 121 ± 60 vs. 40 ± 10 nmol Ca2+/mg protein in WG and Sol), indicating that this was linked to differences in mitochondrial factors between the two muscles. The resistance of WG fibers to PTP opening was not related to the expression of putative protein modulators (cyclophilin D, adenylate nucleotide translocator-1, and voltage-dependent anion channels) or to difference in respiratory properties and occurred despite the fact that production of reactive oxygen species, which promote pore opening, was higher than in the Sol. However, endogenous matrix Ca2+ measured in mitochondria isolated under resting baseline conditions was approximately twofold lower in the WG than in the Sol (56 ± 4 vs. 111 ± 11 nmol/mg protein), which significantly accounted for the resistance of WG. Together, these results reveal fiber type differences in the sensitivity to Ca2+-induced PTP opening, which may constitute a physiological mechanism to adapt mitochondria to the differences in Ca2+ dynamics between fiber types.

Structural Organization and Distribution of Fiber Types in Extraocular Muscles of Cats

1972 ◽  
Vol 30 ◽  
pp. 34-35
Author(s):  
Asish C. Nag ◽  
Lee D. Peachey
Keyword(s):  
Fiber Type ◽  
Light And Electron Microscopy ◽  
Small Diameter ◽  
Extraocular Muscles ◽  
Fiber Types ◽  
Distinctive Features ◽  
Superior Rectus ◽  
Adult Cats ◽  
Different Diameters ◽  
Orbital Region

Cat extraocular muscles consist of two regions: orbital, and global. The orbital region contains predominantly small diameter fibers, while the global region contains a variety of fibers of different diameters. The differences in ultrastructural features among these muscle fibers indicate that the extraocular muscles of cats contain at least five structurally distinguishable types of fibers.Superior rectus muscles were studied by light and electron microscopy, mapping the distribution of each fiber type with its distinctive features. A mixture of 4% paraformaldehyde and 4% glutaraldehyde was perfused through the carotid arteries of anesthetized adult cats and applied locally to exposed superior rectus muscles during the perfusion.

scholarly journals Mechanical Properties of Mortars Reinforced with Amazon Rainforest Natural Fibers

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 155
Author(s):  
Régis Pamponet da Fonseca ◽  
Janaíde Cavalcante Rocha ◽  
Malik Cheriaf
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Natural Fibers ◽  
Construction Materials ◽  
Hot Water ◽  
Amazon Rainforest ◽  
Hot Water Treatment ◽  
Composite Binder ◽  
Naoh Solution ◽  
Reference Samples

The addition of natural fibers used as reinforcement has great appeal in the construction materials industry since natural fibers are cheaper, biodegradable, and easily available. In this work, we analyzed the feasibility of using the fibers of piassava, tucum palm, razor grass, and jute from the Amazon rainforest as reinforcement in mortars, exploiting the mechanical properties of compressive and flexural strength of samples with 1.5%, 3.0%, and 4.5% mass addition of the composite binder (50% Portland cement + 40% metakaolin + 10% fly ash). The mortars were reinforced with untreated (natural) and treated (hot water treatment, hornification, 8% NaOH solution, and hybridization) fibers, submitted to two types of curing (submerged in water, and inflated with CO2 in a pressurized autoclave) for 28 days. Mortars without fibers were used as a reference. For the durability study, the samples were submitted to 20 drying/wetting cycles. The fibers improved the flexural strength of the mortars and prevented the abrupt rupture of the samples, in contrast to the fragile behavior of the reference samples. The autoclave cure increased the compressive strength of the piassava and tucum palm samples with 4.5% of fibers.

scholarly journals Fiber-type susceptibility to eccentric contraction-induced damage of hindlimb-unloaded rat AL muscles

2001 ◽  
Vol 90 (3) ◽  
pp. 770-776 ◽  
Author(s):  
K. Vijayan ◽  
J. L. Thompson ◽  
K. M. Norenberg ◽  
R. H. Fitts ◽  
D. A. Riley
Keyword(s):  
Fiber Type ◽  
Motor Nerve ◽  
Eccentric Contraction ◽  
Fiber Types ◽  
Serial Sections ◽  
Hybrid Fiber ◽  
Hybrid Fibers ◽  
Semithin Sections ◽  
Adductor Longus

Slow oxidative (SO) fibers of the adductor longus (AL) were predominantly damaged during voluntary reloading of hindlimb unloaded (HU) rats and appeared explainable by preferential SO fiber recruitment. The present study assessed damage after eliminating the variable of voluntary recruitment by tetanically activating all fibers in situ through the motor nerve while applying eccentric (lengthening) or isometric contractions. Muscles were aldehyde fixed and resin embedded, and semithin sections were cut. Sarcomere lesions were quantified in toluidine blue-stained sections. Fibers were typed in serial sections immunostained with antifast myosin and antitotal myosin (which highlights slow fibers). Both isometric and eccentric paradigms caused fatigue. Lesions occurred only in eccentrically contracted control and HU muscles. Fatigue did not cause lesions. HU increased damage because lesioned- fiber percentages within fiber types and lesion sizes were greater than control. Fast oxidative glycolytic (FOG) fibers were predominantly damaged. In no case did damaged SO fibers predominate. Thus, when FOG, SO, and hybrid fibers are actively lengthened in chronically unloaded muscle, FOG fibers are intrinsically more susceptible to damage than SO fibers. Damaged hybrid-fiber proportions ranged between these extremes.

The KATP channel Kir6.2 subunit content is higher in glycolytic than oxidative skeletal muscle fibers

2011 ◽  
Vol 301 (4) ◽  
pp. R916-R925 ◽  
Author(s):  
Krystyna Banas ◽  
Charlene Clow ◽  
Bernard J. Jasmin ◽  
Jean-Marc Renaud
Keyword(s):  
Skeletal Muscle ◽  
Cross Sections ◽  
Fiber Type ◽  
Energy Levels ◽  
Muscle Fibers ◽  
Metabolic Stress ◽  
Oxidative Capacity ◽  
Fiber Types ◽  
Fiber Damage ◽  
The Individual

It has long been suggested that in skeletal muscle, the ATP-sensitive K+ channel (KATP) channel is important in protecting energy levels and that abolishing its activity causes fiber damage and severely impairs function. The responses to a lack of KATP channel activity vary between muscles and fibers, with the severity of the impairment being the highest in the most glycolytic muscle fibers. Furthermore, glycolytic muscle fibers are also expected to face metabolic stress more often than oxidative ones. The objective of this study was to determine whether the t-tubular KATP channel content differs between muscles and fiber types. KATP channel content was estimated using a semiquantitative immunofluorescence approach by staining cross sections from soleus, extensor digitorum longus (EDL), and flexor digitorum brevis (FDB) muscles with anti-Kir6.2 antibody. Fiber types were determined using serial cross sections stained with specific antimyosin I, IIA, IIB, and IIX antibodies. Changes in Kir6.2 content were compared with changes in CaV1.1 content, as this Ca2+ channel is responsible for triggering Ca2+ release from sarcoplasmic reticulum. The Kir6.2 content was the lowest in the oxidative soleus and the highest in the glycolytic EDL and FDB. At the individual fiber level, the Kir6.2 content within a muscle was in the order of type IIB > IIX > IIA ≥ I. Interestingly, the Kir6.2 content for a given fiber type was significantly different between soleus, EDL, and FDB, and highest in FDB. Correlations of relative fluorescence intensities from the Kir6.2 and CaV1.1 antibodies were significant for all three muscles. However, the variability in content between the three muscles or individual fibers was much greater for Kir6.2 than for CaV1.1. It is suggested that the t-tubular KATP channel content increases as the glycolytic capacity increases and as the oxidative capacity decreases and that the expression of KATP channels may be linked to how often muscles/fibers face metabolic stress.

Rostrocaudal pattern of fiber-type changes in an overloaded rat ankle extensor

1991 ◽  
Vol 71 (2) ◽  
pp. 558-564 ◽  
Author(s):  
P. F. Gardiner ◽  
B. J. Jasmin ◽  
P. Corriveau
Keyword(s):  
Fiber Type ◽  
Muscle Length ◽  
Similar Degree ◽  
Complex Nature ◽  
Type I ◽  
Fiber Types ◽  
Type Ii ◽  
Cross Sectional ◽  
Hypertrophic Response ◽  
Type I Fibers

Our aim was to quantify the overload-induced hypertrophy and conversion of fiber types (type II to I) occurring in the medial head of the gastrocnemius muscle (MG). Overload of MG was induced by a bilateral tenotomy/retraction of synergists, followed by 12–18 wk of regular treadmill locomotion (2 h of walking/running per day on 3 of 4 days). We counted all type I fibers and determined type I and II mean fiber areas in eight equidistant sections taken along the length of control and overloaded MG. Increase in muscle weights (31%), as well as in total muscle cross-sectional areas (37%) and fiber areas (type I, 57%; type II, 34%), attested to a significant hypertrophic response in overloaded MG. An increase in type I fiber composition of MG from 7.0 to 11.5% occurred as a result of overload, with the greatest and only statistically significant changes (approximately 70–100%) being found in sections taken from the most rostral 45% of the muscle length. Results of analysis of sections taken from the largest muscle girth showed that it significantly underestimated the extent of fiber conversion that occurred throughout the muscle as a whole. These data obtained on the MG, which possesses a compartmentalization of fiber types, support the notion that all fiber types respond to this model with a similar degree of hypertrophy. Also, they emphasize the complex nature of the adaptive changes that occur in these types of muscles as a result of overload.

Buckling analysis of natural fiber reinforced composites

2021 ◽  
Vol 7 (2) ◽  
pp. 58
Author(s):  
Celal Çakıroğlu ◽  
Gebrail Bekdaş
Keyword(s):  
Composite Plate ◽  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Experimental Studies ◽  
Fiber Reinforced Composites ◽  
Fiber Types ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Element Analysis

In the recent years natural fiber reinforced composites are increasingly receiving attention from the researchers and engineers due to their mechanical properties comparable to the conventional synthetic fibers and due to their ease of preparation, low cost and density, eco-friendliness and bio-degradability. Natural fibers such as kenaf or flux are being considered as a viable replacement for glass, aramid or carbon. Extensive experimental studies have been carried out to determine the mechanical behavior of different natural fiber types such as the elastic modulus, tensile strength, flexural strength and the Poisson’s ratio. This paper presents a review of the various experimental studies in the field of fiber reinforced composites while summarizing the research outcome about the elastic properties of the major types of natural fiber reinforced composites. Furthermore, the performance of a kenaf reinforced composite plate is demonstrated using finite element analysis and results are compared to a glass fiber reinforced laminated composite plate.

A modified resistance to compression (RtC) test for evaluation of natural fiber softness

2022 ◽  
pp. 004051752110694
Author(s):  
Hao Yu ◽  
Christopher Hurren ◽  
Xin Liu ◽  
Stuart Gordon ◽  
Xungai Wang
Keyword(s):  
Compression Test ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Assessment Method ◽  
Fiber Types ◽  
New Approach ◽  
Additional Information ◽  
Significant Difference ◽  
Single Force ◽  
Different Diameters

Comfort is a key feature of any clothing that relates significantly to softness of the fiber, yarn and fabric from which is it constructed. A known softness assessment method for fibers is the resistance to compression test. This traditional test only provides a single force value for the resistance of a loose fiber sample using a fixed mass under compression. In this research, a modified resistance to compression test was introduced to show the effects of repeated compression, providing more information about the softness and resilience of selected fibers. Three different natural fiber types, including wool, cotton and alpaca were compared using this new approach. The results showed compression profiles were quite different for different fiber types as well as for the same fibers with different diameters. While the diameters of the wool and alpaca samples were similar (18.5 μm), the modified resistance to compression values were significantly higher for wool (with a peak value at 9.5 kPa compared to 2.1 kPa for alpaca). Cotton was different from wool and alpaca but showed a similar modified resistance to compression value (10.4 kPa) to wool. During cycles of compression, modified resistance to compression peak values decreased slightly and then tended to be constant. Even though the structures of wool, cotton and alpaca were quite different, there was no significant difference in the magnitude of decline in modified resistance to compression peak values. This means that the modified resistance to compression test is able to provide additional information on the resilience characteristics of different natural fibers, and can reveal the resistance behavior of fiber samples during cyclic compression.

Sign in / Sign up

Export Citation Format

Share Document