scholarly journals Morphological Diversity among Accessions of Apple Tree (Malus × Domestica Borkh)

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Simon Mada Mbovora ◽  
Cousin Musvosvi ◽  
Edmore Gasura
Keyword(s):  
Malus Domestica ◽  
Apple Tree ◽  
Cultural Practices ◽  
Morphological Diversity ◽  
Group Method ◽  
Morphological Markers ◽  
Experimental Station ◽  
Randomized Design ◽  
Breeding Programmes

Worldwide, apple ranks fourth in terms of economic importance after citrus, grapes, and bananas with a world production of above 71 million tonnes per year. Apple accessions that are in cultivation throughout the world appear to have come from a genetically similar source. Their diversity has further been decreased through the use of preferred few accessions in breeding programmes. Determination of morphological diversity among the accessions maintained at Nyanga Experimental Station is key for identification and informed use of the accessions in adaptive research. The purpose of this study was to determine the extent of morphological diversity among apple accessions conserved at Nyanga Experimental Station, Zimbabwe, and identify promising accessions for use as cultivars in warmer environments. Sixty-eight Malus domestica accessions of worldwide provenance all maintained at Nyanga Experimental Station were evaluated in a complete randomized design with three replications. The experiment was managed following the standard cultural practices for apples. Characterization using morphological markers was done following the format of the International Board for Plant and Genetic Resources (IBPGR). Data were subjected to cluster analysis based on the unweighted paired group method using arithmetic averages (UPGMA) method. A narrow genetic diversity was observed as reflected by the pairwise genetic similarity matrix that ranged from 80 to 100%. Promising accessions such as Anna, Mayaan, Michal, Elah, Tydeman’s Early Worcester, Discovery, and Mollies Delicious were identified for use as cultivars in warmer areas.

Analysis of Fibronectin and TGF-β1 Immunoexpression to Determination of Wound Vitality in Wistar Rats (Rattus norvegicus)

2015 ◽  
Vol 1 (1) ◽  
Author(s):  
Nita Novita ◽  
Hasrayati Agustina ◽  
Bethy S. Hernowo ◽  
Abdul H. Hassan
Keyword(s):  
Rattus Norvegicus ◽  
Wistar Rats ◽  
Age Determination ◽  
Scientific Field ◽  
Wound Age ◽  
Forensic Practice ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Tgf Β1

Wound examination is indispensable in forensic practice. The scientific field of wound age determination has advanced progressively during recent years.The purpose of this study was to determine the differences of fibronectin and TGF-β1 expression in both antemortem and postmortem wounds. This study was an experimental with completely randomized design.  The skin wounds (vital and postmortem) were taken from fourty Wistar rats and divided into 10 groups of rats. Immunohistochemical staining was performed to determine the differences between antemortem and postmortem wounds. The result showed that in 30 minutes after antemortem wound infliction, all of samples showed weak reactivity for fibronectin and TGF-β1 (100%).  In first hour after wound infliction, 3 samples (75%) showed weakly positive and 1 sample (25%) strongly positive for fibronectin and TGF-β1.  In 2 hour after wound infliction, 1 sample (25%) showed weakly positive and 3 sample (75%) strongly positive for fibronectin and TGF-β1.  In 3 and 4 hour after wound infliction, all of samples strongly positive for fibronectin and TGF-β1.  In postmortem wound, all of samples showed negativity for fibronectin and TGF-β1. In conclusion, fibronectin and TGF-β1 may be useful in the determination of wound vitality. Keywords: wound, fibronectin, TGF-β1, vitality

scholarly journals 31 Determination of Optimal Harvest Weight for Mangalica Pigs Using a Serial Harvest Approach to Measure Growth Performance and Carcass Characteristics

2020 ◽  
Vol 98 (Supplement_2) ◽  
pp. 34-34
Author(s):  
Maegan A Reeves ◽  
Courtney E Charlton ◽  
Shannon R Wilkerson ◽  
John G Rehm ◽  
Terry D Brandebourg
Keyword(s):  
Live Weight ◽  
Weight Class ◽  
Marbling Score ◽  
Randomized Design ◽  
Carcass Parameters ◽  
Body Weights ◽  
Optimal Harvest ◽  
Completely Randomized Design ◽  
Growth Trial

Abstract Mangalica pigs are a popular niche breed given their reputation for superior quality pork. However, growth and carcass parameters for this breed are poorly documented. Our objective was to better characterize optimal harvest weights for the Mangalica breed. To accomplish this, a growth trial was conducted whereby pigs (n=56) were randomly distributed across stratified harvest weights (50, 57, 68, 82, 93, 102, 127 kg) in a completely randomized design. Pigs were fed standard finisher rations with individual daily feed intakes and weekly body weights recorded for all animals. At 24h postmortem, carcasses were split and ribbed with marbling and loin eye area (LEA) measured at the 10th rib. Primal cuts were fabricated and individually weighed. Fat back was separated from the loin and weighed. As expected, live weight significantly increased across weight class (P < 0.0001). ADG was similar across classes up to 82 kg live weight before steadily declining with increasing weight class (P < 0.0025). Likewise, feed efficiency did not differ between classes until weights heavier than 82 kg (P < 0.03). LEA significantly increased by class up to 82 kg and then plateaued as harvest weight increased further (P < 0.003). Marbling score significantly increased with increasing weight class up to 102 kg where they then plateaued (p < 0.04). Fat back dramatically increased across all weight classes (p < 0.0001) despite negligible increases in LEA or marbling after 102 kg. Primal cut weights for the ham (P < 0.0001), loin (P < 0.0001), Boston butt (P < 0.0001), shoulder (P < 0.0001), and belly (P < 0.0001) all significantly increased with increasing live weight. These data suggest an optimal harvest weight occurs between 82 to 102 kg while offering little objective justification for the current practice of harvesting Mangalica pigs at much heavier live weights.

scholarly journals Reduction in the in vitro sensitivity oF Drechslera tritici-repentis, isolated from wheat, to strobilurin and triazole fungicides

2017 ◽  
Vol 43 (1) ◽  
pp. 20-25
Author(s):  
Rosane Baldiga Tonin ◽  
Erlei Melo Reis ◽  
Aveline Avozani
Keyword(s):  
Inhibitory Concentration ◽  
In Vitro Sensitivity ◽  
Randomized Design ◽  
Inhibition Data ◽  
Ic50 Values ◽  
Control Failure ◽  
Quinone Outside Inhibitors ◽  
Completely Randomized Design

ABSTRACT Reports of failure in the chemical control of wheat yellow leaf spot led to determination of the sensitivity of Drechslera tritici-repentis (Dtr) to the fungicides quinone outside inhibitors (QoIs) and demethylation inhibitors (DMIs). The IC50 was obtained for strobilurins (azoxystrobin, kresoxim-methyl, picoxystrobin and pyraclostrobin) and for triazoles (cyproconazole, epoxiconazole, propiconazole, prothioconazole and tebuconazole), using five Dtr isolates. Seven concentrations of the fungicides were tested in the bioassay: 0.00; 0.01; 0.10; 1.00; 10:00 and 20.00 and 40.00 mg/L active ingredient (a.i.). Assays consisted of completely randomized design and four replicates. Each experiment was performed twice, using the average of the two tests for statistical analysis. The percentage inhibition data for conidial germination (QoIs) and for mycelial growth (DMIs) were subjected to logarithmic regression analysis, calculating the 50% inhibitory concentration (IC50) based on the generated equation. There was a reduction in the sensitivity of Dtr isolates to strobilurins. IC50 values ranged from 0.58 to > 40.00 mg/L. The lowest sensitivity of isolates was detected for azoxystrobin, kresoxim-methyl, picoxystrobin and trifloxystrobin. Pyraclostrobin was most efficient, showing IC50 between 0.58 and 1.03 mg/L. The IC50 ranged from 0.35 to 1.37 mg/L for epoxiconazole, from 0.49 to 1.28 mg/L for propiconazole and from 1.41 to 2.34 mg/L for tebuconazole. Prothioconazole was most potent, showing IC50 between 0.09 and 0.21 mg/L. The hypothesis that the control failure can be attributed to the reduced Dtr sensitivity to the fungicides QoIs and DMIs was confirmed.

scholarly journals Effect of Fertilizer Management on NPKS Leaching Loss from Sandy Loam Soil under Alternate Wetting and Drying Condition

2016 ◽  
Vol 20 (1) ◽  
pp. 59-64
Author(s):  
MN Islam ◽  
MM Rahman ◽  
MJA Mian ◽  
MH Ali
Keyword(s):  
Sandy Loam ◽  
Foliar Spray ◽  
Sandy Loam Soil ◽  
Fertilizer Management ◽  
Wetting And Drying ◽  
Leaching Loss ◽  
Randomized Design ◽  
Loam Soil ◽  
Dry Soil

Leaching loss of nutrients hampers plant growth and contributes to environmental pollution. An experiment was conducted at the net house of Soil Science Department, Bangladesh Agricultural University, Mymensingh during January to May 2009 to find out the leaching loss of N, P, K and S from sandy loam soil. Each pot received 6.67 kg dry soil with an opening at the bottom for collecting leachates. Six treatments were used: T0 = control, T1 = NPKS (120, 25, 60 and 20 kg ha-1), T2 = NPKS (180, 37, 90 and 30 kg ha-1), T3 = NPKS (90, 5, 28 and 17 kg ha-1) + cowdung (2.5 t ha-1), T4 = NPKS (109, 25, 60 and 20 kg ha-1, N as USG) and T5 = as T1 but N applied as foliar spray. Treatments were arranged in a completely randomized design with three replications. Leachates were collected at 15 days interval for determination of NPKS. The total leaching loss of N, P, K and S due to different treatments ranged from 16.00 to 90.21, 0.07 to 0.29, 9.60 to 11.20 and 3.75 to 17.81 kg ha-1, respectively. Application of chemical fertilizer at higher rates resulted in greater loss of nutrients. Integrated fertilizer management with cowdung (T3) minimized such losses. Use of USG also reduced leaching loss of N, P, K and S. The application of cowdung and USG with recommended balanced fertilizer might be useful for minimizing N, P, K and S loss from wetland rice field.Bangladesh Rice j. 2016, 20(1): 59-64

scholarly journals Efficiency of portable chlorophyll meters in assessing the nutritional status of wheat plants

2015 ◽  
Vol 19 (12) ◽  
pp. 1148-1151 ◽  
Author(s):  
Alessana F. Schlichting ◽  
Edna M. Bonfim-Silva ◽  
Matheus de C. Silva ◽  
William Pietro-Souza ◽  
Tonny J. A. da Silva ◽  
...  
Keyword(s):  
Nutritional Status ◽  
Chlorophyll Content ◽  
Direct Determination ◽  
Probability Level ◽  
Indirect Determination ◽  
N Concentration ◽  
Randomized Design ◽  
Chlorophyll Index ◽  
Completely Randomized Design

ABSTRACT The objective of this study was to verify the efficiency of two portable chlorophyll meters (Minolta SPAD® 502 and Falker ClorofiLOG® 1030) in assessing the nutritional status of wheat plants, correlating the indices from the devices and the direct determination of chlorophyll content with the concentration of nitrogen (N) in the plant. The experiment was conducted in a greenhouse, in pots with 5 dm3 of Oxisol, in a completely randomized design, with six N doses (0, 80, 160, 240, 320 and 400 mg dm-3) and five replicates. At 47 days after emergence, the readings of SPAD and Falker indices and the quantification of chlorophyll content and N concentration in wheat plants were performed, as well as analysis of variance and correlation test, both at 0.05 probability level. The chlorophyll meters Minolta SPAD® 502 and Falker ClorofiLOG® 1030 do not differ with respect to the indirect determination of chlorophyll in wheat plants. The Falker chlorophyll index was statistically equal to the chlorophyll content. Indirect chlorophyll indices and chlorophyll content showed a high correlation with the N concentration in the plant.

scholarly journals Breeding of maize types with specific traits at the Maize Research Institute, Zemun Polje

Genetika ◽  
2007 ◽  
Vol 39 (2) ◽  
pp. 169-180 ◽  
Author(s):  
Zorica Pajic
Keyword(s):  
Energy Crop ◽  
Maize Hybrids ◽  
High Lysine ◽  
Breeding Programmes ◽  
Selection For ◽  
High Amylose ◽  
Harvest Maturity ◽  
Maize Research Institute ◽  
Research Institute

Maize is primarily grown as an energy crop, but the use of different specific versions, such as high-oil maize, high-lysine maize, waxy maize, white-seeded maize, popping maize and sweet maize, is quite extensive. Speciality maize, due to its traits and genetic control of these traits, requires a particular attention in handling breeding material during the processes of breeding. It is especially related to prevention of uncontrolled pollination. In order to provide successful selection for a certain trait, the following specific procedures in evaluation of the trait are necessary: the estimation of a popping volume and flake quality in popping maize; the determination of sugars and harvest maturity in sweet maize; the determination of oil in selected samples of high-oil maize types, and so forth. Breeding programmes for speciality maize, except high-amylose maize, have been implemented at the Maize Research Institute, Zemun Polje, Belgrade, for the last 45 years. A great number of high-yielding sweet maize hybrids, popping maize, high-oil and high-lysine, flint and white-seeded maize hybrids were developed during this 45-year period. Auspicious selection and breeding for these traits is facilitated by the abundant genetic variability and technical and technological possibilities necessary for successful selection.

scholarly journals Application of sorting dependent criterias in determination of volume and area bruising of “Golab-Kohanz” apple in Iran

Genetika ◽  
2012 ◽  
Vol 44 (1) ◽  
pp. 177-187 ◽  
Author(s):  
Ahmad Dadashpour
Keyword(s):  
Contact Surface ◽  
Surface Material ◽  
Drop Height ◽  
Randomized Design ◽  
Significant Difference ◽  
Completely Randomized Design ◽  
Damage Criteria ◽  
Apple Fruits ◽  
Area And Volume

Apple fruits are subjected to different loading damage from harvesting to supermarket shelf. Bruising has been attracted many researchers as one of the most important damage criteria. In this research, the effects of some factors such as counter-face material, drop height and linear velocity of apples (conveyor speed) were investigated. Influence of these factors on bruising of ?Golab-Kohanz? variety was analyzed by a Completely Randomized Design (CRD) with factorial test at three levels of drop height (10, 20 and 30 cm), conveyor speed (0.05, 0.1 and 0.15 ms- 1) and four counter-face materials (wood, steel, plastic and cardboard). Tests were conducted at three replications with 108 treatments. Analysis of variance results showed that the effects of drop height and counter-face material on bruising area at 1% level was significant while bruising volume only affected by contact surface material (P<0.01). Mean comparison test indicated that there was no significant difference among levels of conveyor speed on the area and volume bruising. Also, there was no significant difference among levels of drop height on volume bruising while it was significant on the area bruising. Steel and wooden material had no significant effect on the area and volume bruising but their differences with plastic and cardboard were significant. Therefore, drop height and counter-face material must be considered in designing the apple processing systems.

scholarly journals Using Symbols and Shapes for Analysis in Small Focus Group Research

2016 ◽  
Author(s):  
Oladokun Omojola
Keyword(s):  
Focus Group ◽  
Prima Facie ◽  
Group Method ◽  
Group Discussions ◽  
Focus Group Research ◽  
Group Research ◽  
Research Findings ◽  
Small Focus ◽  
Focus Group Method

Substantial literature exists to support the growing importance of focus group research, having been around for decades. Its ubiquity under the scholarship radar is not in doubt while the analyses of findings commonly seen are scholarly and significantly sophisticated. However, these analyses have been found to be limited in scope for fresh adopters of the focus group method, non-literate beneficiaries of research findings and business people who are critically averse to lengthy textual statements about outcomes. This article introduces the use of symbols as a means of analyzing responses from small focus group discussions. It attempts to demonstrate that using symbols can substantially assist in the prima facie determination of perceptions from a focus group membership, its patterns of agreement and disagreement, as well as the sequence of its discussions.

scholarly journals Effects of Fertilization on Biomass and Macronutrient Content of Eucalyptus urophylla S.T. Blake in Arenized Soil of Pampa Biome

2019 ◽  
pp. 1-10
Author(s):  
Huan Pablo de Souza ◽  
Mauro Valdir Schumacher ◽  
Aline Aparecida Ludvichak ◽  
Dione Richer Momolli ◽  
Claudiney Do Couto Guimarães ◽  
...  
Keyword(s):  
Biomass Accumulation ◽  
Stem Bark ◽  
Total Biomass ◽  
Eucalyptus Urophylla ◽  
Stem Wood ◽  
Randomized Design ◽  
Pampa Biome ◽  
Biomass Determination ◽  
To Receive

The objective of this study was to quantify the biomass and the macronutrient stock in an experiment of fertilization with Eucalyptus urophylla, planted in arenized soil at 12 months-old, in Rio Grande do Sul, Brazil. The experiment had a completely randomized design with five treatments (T1, T2, T3, T4 and T5) with three replications. The treatments T2, T3, T4 and T5, received increasing doses of triple superphosphate. On the other hand, the T1 treatment was the only one to receive natural phosphate in planting. For the determination of the biomass, fifteen trees were felled and separated in the following components: leaves, branches, stem bark, stem wood and roots. Samples of the components were collected and transported to the laboratory for biomass determination and chemical analysis. The total biomass varied between the treatments, with highest biomass accumulation of 6.83 Mg ha-1 occurring in T5. The T1 presented the highest biomass for roots representing 33.4% of the total biomass. The biomass distribution among the different components in the decreasing order was: roots > stem wood > leaves > branches > stem bark, for all the treatments. The treatment with higher doses of fertilizers (T5) presented the highest amount of nutrient accumulation in the total biomass (131.26 kg ha-1). The concentration and accumulation of nutrients presented the following trend K > N > Ca > Mg > P > S. Analyzing the different components of biomass, the highest amounts of nutrients followed the order: leaves > roots > stem wood > branches > stem bark. Fertilization influenced the biomass production of E. urophylla in arenized soil in the Pampa biome, but without significant differences to date (12 months). The leaves had the highest concentration of macronutrients, with the exception of Ca, which was higher in the bark. The K was the element that presented highest accumulation in whole tree. The plantation of eucalyptus with fertilization management may be an alternative for the economic use of arenized soil.

Sign in / Sign up

Export Citation Format

Share Document