scholarly journals Quantized Feedback Control of Active Suspension Systems Based on Event Trigger

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Jinwei Sun ◽  
Jingyu Cong ◽  
Weihua Zhao ◽  
Yonghui Zhang
Keyword(s):  
Feedback Control ◽  
Control Method ◽  
Controller Design ◽  
Sliding Mode ◽  
External Disturbance ◽  
Active Suspension ◽  
Trigger Mechanism ◽  
Actuator Dynamics ◽  
Quantized Feedback ◽  
Event Trigger

As the deviation error will accumulate during the data acquisition and transcoding process of an active suspension system, this paper presents a sliding-mode-based quantized feedback control method. The aim of the controller is to improve the vertical performance of vehicles in the presence of external interferences. A 7-DOF suspension model with nonlinear springs and actuator dynamics is built for the control purpose. Firstly, a static quantizer on the uplink channel and a dynamic quantizer on the downlink channel are considered in the sliding mode controller to reduce the cumulative error and suppress the sprung mass motions. Secondly, an event trigger mechanism is introduced in the controller design process to reduce energy consumption and operation frequency of the actuator. The overall stability of the designed controller is proved by the Lyapunov functions. Finally, numerical simulations are carried out to evaluate the efficacy of the proposed controller. Different quantitative and trigger conditions are discussed, and the random road excitation is considered as the external disturbance input. The results of the control method indicate that the designed controller can improve the riding comfort with little loss of handling stability compared with the passive system. In addition, the trigger mechanism can improve the working efficiency of actuators effectively.

The Simulation Analysis of Semi-Active Suspension System in Vehicle Based on Sliding Mode Control with Varying Structure

2011 ◽  
Vol 216 ◽  
pp. 96-100
Author(s):  
Jing Jun Zhang ◽  
Wei Sha Han ◽  
Li Ya Cao ◽  
Rui Zhen Gao
Keyword(s):  
Control Method ◽  
Simulation Analysis ◽  
Reference Model ◽  
Sliding Mode ◽  
Tracking Error ◽  
Active Suspension ◽  
Suspension System ◽  
Sliding Mode Controller ◽  
Error Dynamics ◽  
Dynamic Quality

A sliding mode controller for semi-active suspension system of a quarter car is designed with sliding model varying structure control method. This controller chooses Skyhook as a reference model, and to force the tracking error dynamics between the reference model and the plant in an asymptotically stable sliding mode. An equal near rate is used to improve the dynamic quality of sliding mode motion. Simulation result shows that the stability of performance of the sliding-mode controller can effectively improve the driving smoothness and safety.

Adaptive fault-tolerant control for active suspension systems based on the terminal sliding mode approach

2019 ◽  
Vol 234 (2) ◽  
pp. 501-511
Author(s):  
Amirhossein Kazemipour ◽  
Alireza B Novinzadeh
Keyword(s):  
Control Strategy ◽  
Control Method ◽  
Fault Tolerant ◽  
Sliding Mode ◽  
Fault Tolerant Control ◽  
Active Suspension ◽  
Suspension System ◽  
Terminal Sliding Mode ◽  
Car Suspension ◽  
Suspension Model

In this paper, a control system is designed for a vehicle active suspension system. In particular, a novel terminal sliding-mode-based fault-tolerant control strategy is presented for the control problem of a nonlinear quarter-car suspension model in the presence of model uncertainties, unknown external disturbances, and actuator failures. The adaptation algorithms are introduced to obviate the need for prior information of the bounds of faults in actuators and uncertainties in the model of the active suspension system. The finite-time convergence of the closed-loop system trajectories is proved by Lyapunov's stability theorem under the suggested control method. Finally, detailed simulations are presented to demonstrate the efficacy and implementation of the developed control strategy.

scholarly journals Robust Adaptive Sliding Mode Fault Tolerant Control for Nonlinear System with Actuator Fault and External Disturbance

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Liang Zheng ◽  
Xuelian Dong ◽  
Qian Luo ◽  
Menglan Zeng ◽  
Xinping Yang ◽  
...  
Keyword(s):  
Control Method ◽  
Fault Tolerant ◽  
Sliding Mode ◽  
External Disturbance ◽  
Fault Tolerant Control ◽  
Actuator Fault ◽  
Estimation Errors ◽  
Adaptive Sliding Mode ◽  
Sliding Motion ◽  
Robust Adaptive

In this paper, an adaptive sliding mode fault tolerant control (ASMFTC) approach is proposed for a class of nonlinear systems with actuator fault, uncertainty, and external disturbance. Specifically, first, a novel observer is proposed to estimate the state, actuator fault, and external disturbance. Then, by utilising the observed information, a novel output sliding mode observer is constructed. In the control method, an adaptive law and two compensators are designed to attenuate the unknown estimation errors, actuator fault, and disturbance. Furthermore, the reaching ability of the sliding motion is analysed and the H-infinite performance is introduced to ensure the robustness of the system. Finally, a flexible single joint manipulator system and a two-cart system are used to verify the effectiveness of the proposed method.

scholarly journals Sliding Mode Based Control of Dual Boost Inverter for Grid Connection

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4241 ◽  
Author(s):  
Diana Lopez-Caiza ◽  
Freddy Flores-Bahamonde ◽  
Samir Kouro ◽  
Victor Santana ◽  
Nicolás Müller ◽  
...  
Keyword(s):  
Control Method ◽  
Controller Design ◽  
Sliding Mode ◽  
Current Control ◽  
Voltage Step ◽  
Control Loops ◽  
Voltage Ratio ◽  
Grid Connection ◽  
Resonant Controller ◽  
Laboratory Prototype

Single-stage voltage step-up inverters, such as the Dual Boost Inverter (DBI), have a large operating range imposed by the high step-up voltage ratio, which together with the converter of non-linearities, makes them a challenge to control. This is particularly the case for grid-connected applications, where several cascaded and independent control loops are necessary for each converter of the DBI. This paper presents a global current control method based on a combination of a linear proportional resonant controller and a non-linear sliding mode controller that simplifies the controller design and implementation. The proposed control method is validated using a grid-connected laboratory prototype. Experimental results show the correct performance of the controller and compliance with power quality standards.

scholarly journals Guidance Law and Neural Control for Hypersonic Missile to Track Targets

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Wenxing Fu ◽  
Binbin Yan ◽  
Xiaofei Chang ◽  
Jie Yan
Keyword(s):  
Neural Control ◽  
Controller Design ◽  
Sliding Mode ◽  
External Disturbance ◽  
Control Laws ◽  
Guidance And Control ◽  
Maneuvering Target ◽  
Guidance Law ◽  
Control Command ◽  
And Control

Hypersonic technology plays an important role in prompt global strike. Because the flight dynamics of a hypersonic vehicle is nonlinear, uncertain, and highly coupled, the controller design is challenging, especially to design its guidance and control law during the attack of a maneuvering target. In this paper, the sliding mode control (SMC) method is used to develop the guidance law from which the desired flight path angle is derived. With the desired information as control command, the adaptive neural control in discrete time is investigated ingeniously for the longitudinal dynamics of the hypersonic missile. The proposed guidance and control laws are validated by simulation of a hypersonic missile against a maneuvering target. It is demonstrated that the scheme has good robustness and high accuracy to attack a maneuvering target in the presence of external disturbance and missile model uncertainty.

scholarly journals Implementation of a PID Type Sliding-Mode Controller Design Based on Fractional Order Calculus for Industrial Process System

2021 ◽  
Vol 27 (6) ◽  
pp. 4-10
Author(s):  
Kagan Koray Ayten ◽  
Ahmet Dumlu
Keyword(s):  
Fractional Order ◽  
Control Method ◽  
Controller Design ◽  
Sliding Mode ◽  
Industrial Process ◽  
Liquid Level ◽  
Dramatic Improvement ◽  
Reference Trajectory ◽  
Process System ◽  
The Individual

This paper is devoted to designing a fractional order Proportional Integral Derivative (PID) type sliding mode control method (FO-PIDSMC) for a non-linear liquid level coupled tank process system. By considering the individual advantages of the FO calculus and PID type SMC method, this proposed FO-PIDSMC technique is designed to integrate the FO calculus method with PID type SMC scheme to obtain an accurate and robust liquid level tracking in terms of the predefined reference trajectory. The real-time experimental results of the proposed controller suggest a dramatic improvement over the traditional process system controller methods in both trajectory tracking and required control action.

Sign in / Sign up

Export Citation Format

Share Document