scholarly journals Compact MIMO antenna using dual-band for fifth-generation mobile communication system

2021 ◽  
Vol 24 (2) ◽  
pp. 921
Author(s):  
Debani Prasad Mishra ◽  
Kshirod Kumar Rout ◽  
Surender Reddy Salkuti
Keyword(s):  
Reflection Coefficient ◽  
Mobile Communication ◽  
Communication System ◽  
Impedance Matching ◽  
Antenna Design ◽  
Dual Band ◽  
Time Zone ◽  
Mimo Antenna ◽  
Fifth Generation ◽  
Multiple Input

This paper presents the design of a multiple-input and multiple-output (MIMO) antenna for a fifth-generation (5G) smartphone that will work in dual-band. The antenna proposed in this work operates at 2 frequency ranges, i.e., (3300-3600) MHz and (4800-5000) MHz. The antenna design consists of four antennas that are placed perpendicular to the edge of the system and this makes it different from the traditional 5G antennas. The area of each antenna on the side frames is (3.9×17 mm), and hence can be used in ultra-thin smartphones for 5G applications. The reflection coefficient obtained in the simulations is less than -6 dB for the required band, which suggests that the required impedance matching is obtained. The antenna proposed is designed by using central time zone (CST) microwave studio.

Side-Frame Dual-Band MIMO Antennas for 5G Smartphone Applications

2021 ◽  
Vol 35 (11) ◽  
pp. 1314-1315
Author(s):  
Guobo Wei ◽  
Quanyuan Feng
Keyword(s):  
Impedance Matching ◽  
Antenna System ◽  
Circuit Board ◽  
Dual Band ◽  
Smartphone Applications ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Fifth Generation ◽  
Full Screen ◽  
5 Ghz

A side-frame dual-band multi-input multi-output (MIMO) antenna system for fifth-generation (5G) mobile communication in smartphone applications is presented, operating in 3.5 GHz band (3400-3600 MHz) and 5 GHz band (4800-5000 MHz). The proposed four-element antenna array is placed at four corners of the circuit board and printed on the side edge frame. The height of the structure is only 4.1 mm, which is compatible for ultra-thin full screen smartphones. According to the verification of HFSS and CST, ideal impedance matching bandwidths (superior to 10dB) and excellent isolations (superior to 18 dB) are obtained over the 3.5 GHz band and 5 GHz band, with peak gain of 6.18 dB and 4.9 dB, respectively.

5G/B5G Internet of Things MIMO Antenna Design

Signals ◽  
2022 ◽  
Vol 3 (1) ◽  
pp. 29-37
Author(s):  
Muhammad Ikram
Keyword(s):  
Internet Of Things ◽  
Wireless Communication ◽  
Communication Systems ◽  
Antenna Design ◽  
Slot Antenna ◽  
Fourth Generation ◽  
Mimo Antenna ◽  
Fifth Generation ◽  
Sixth Generation ◽  
Multiple Input

The current and future wireless communication systems, WiFi, fourth generation (4G), fifth generation (5G), Beyond5G, and sixth generation (6G), are mixtures of many frequency spectrums. Thus, multi-functional common or shared aperture antenna modules, which operate at multiband frequency spectrums, are very desirable. This paper presents a multiple-input and multiple-output (MIMO) antenna design for the 5G/B5G Internet of Things (IoT). The proposed MIMO antenna is designed to operate at multiple bands, i.e., at 3.5 GHz, 3.6 GHz, and 3.7 GHz microwave Sub-6 GHz and 28 GHz mm-wave bands, by employing a single radiating aperture, which is based on a tapered slot antenna. As a proof of concept, multiple tapered slots are placed on the corner of the proposed prototype. With this configuration, multiple directive beams pointing in different directions have been achieved at both bands, which in turn provide uncorrelated channels in MIMO communication. A 3.5 dBi realized gain at 3.6 GHz and an 8 dBi realized gain at 28 GHz are achieved, showing that the proposed design is a suitable candidate for multiple wireless communication standards at Sub-6 GHz and mm-wave bands. The final MIMO structure is printed using PCB technology with an overall size of 120 × 60 × 10 mm3, which matches the dimensions of a modern mobile phone.

scholarly journals A Compact Planar Dual-Band Multiple-Input and Multiple-Output Antenna with High Isolation for 5G and 4G Applications

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 544
Author(s):  
Rong Yang ◽  
Shuqi Xi ◽  
Qibo Cai ◽  
Zhizhou Chen ◽  
Xiaohang Wang ◽  
...  
Keyword(s):  
Ground Plane ◽  
Dual Band ◽  
Fourth Generation ◽  
Mimo Antenna ◽  
High Isolation ◽  
Fifth Generation ◽  
Multiple Input ◽  
Strip Lines ◽  
Compact Planar

In this paper, a compact planar dual-band multiple-input and multiple-output (MIMO) antenna with high isolation is presented to satisfy the increasing requirements of wireless communication. The proposed antenna array consists of two identical radiating elements which are fed through micro-strip lines. A rectangular micro-strip stub with defected ground plane is employed to achieve a high isolation which is less than −15 dB between the two antenna elements. The size of the entire MIMO antenna is 32 × 32 × 1.59 mm3, which is printed on an FR4 substrate. The proposed MIMO antenna is optimized to operate in 2.36–2.59 GHz and 3.17–3.77 GHz bands, which can cover the fifth-generation (5G) n7 (2.5–2.57 GHz) and the fourth-generation (4G) Long Term Evolution (LTE) band 42 (3.4–3.6 GHz). The proposed MIMO antenna is feasible for the 5G and 4G applications.

Dual Band Paper Substrate CPW Antenna for Wireless Applications

2019 ◽  
Vol 8 (9S3) ◽  
pp. 605-608
Keyword(s):  
Reflection Coefficient ◽  
Mobile Communication ◽  
Coplanar Waveguide ◽  
Dual Band ◽  
Antenna Feed ◽  
Paper Substrate ◽  
Frequency Bands ◽  
Wireless Applications

In this paper, a 15* 80 sized antenna is designed over a paper substrate to test its flexible properties. The proposed antenna feed by a grounded coplanar waveguide(GCPW) is stimulated and the measured results show the operating Dual Band of the antenna cover(3.34-3.62 GHz) and (5.92-6.24 GHz) with the reflection coefficient |S11|< -15dB.These frequency bands operate over SHF bands and hence supports Fixed Mobile Communication and WLAN applications.

scholarly journals Miniaturized Broadband-Multiband Planar Monopole Antenna in Autonomous Vehicles Communication System Device

Electronics ◽  
2021 ◽  
Vol 10 (21) ◽  
pp. 2715
Author(s):  
Ming-An Chung ◽  
Chih-Wei Yang
Keyword(s):  
Communication System ◽  
Autonomous Vehicles ◽  
Low Cost ◽  
Antenna Design ◽  
Dual Band ◽  
Impedance Change ◽  
Antenna Structure ◽  
Low Profile ◽  
Performance Results ◽  
Wireless Standards

The article mainly presents that a simple antenna structure with only two branches can provide the characteristics of dual-band and wide bandwidths. The recommended antenna design is composed of a clockwise spiral shape, and the design has a gradual impedance change. Thus, this antenna is ideal for applications also recommended in these wireless standards, including 5G, B5G, 4G, V2X, ISM band of WLAN, Bluetooth, WiFI 6 band, WiMAX, and Sirius/XM Radio for in-vehicle infotainment systems. The proposed antenna with a dimension of 10 × 5 mm is simple and easy to make and has a lot of copy production. The operating frequency is covered with a dual-band from 2000 to 2742 MHz and from 4062 to beyond 8000 MHz and, it is also demonstrated that the measured performance results of return loss, radiation, and gain are in good agreement with simulations. The radiation efficiency can reach 91% and 93% at the lower and higher bands. Moreover, the antenna gain can achieve 2.7 and 6.75 dBi at the lower and higher bands, respectively. This antenna design has a low profile, low cost, and small size features that may be implemented in autonomous vehicles and mobile IoT communication system devices.

scholarly journals Design and Analysis of MIMO Dual Band Patch Antenna for 5G New Radio Applications in Mobile Terminals

2021 ◽  
Vol 9 (VI) ◽  
pp. 5446-5451
Author(s):  
Swati Dhandade
Keyword(s):  
Mobile Communications ◽  
Antenna Design ◽  
Dual Band ◽  
Slight Variation ◽  
Band Frequency ◽  
Mimo Antenna ◽  
High Isolation ◽  
New Radio ◽  
Compact Size ◽  
5G Mobile Communications

This paper presents a dual-band MIMO antenna design with compact size for 5G communication under 6 GHz band frequency. The metallic monopole stub structure is used to miniaturization of antenna. The L-shape monopole antenna is modified by adding semi-circular element in radiating structure of monopole to obtain dual-band resonance. The High isolation is achieved by employing T-shaped stub in ground plane.It has compact size is 45 mm × 25 mm × 1.6 mm3. The proposed Dual Band MIMO antenna has been design on FR4 material with ɛr = 4.4 with 1.6 thickness. The proposed antenna has 5G application in the bands of 2.5 GHz (2.34 GHz-2.62 GHz) and 3.5 GHz (3.20 GHz-5.20 GHz). The bandwidth of antenna getting 320MHz and 2500MHz at 2.5GHz and 3.5GHz respectively. The Isolation (S21) of proposed antenna is -31.2 dB at 2.5 GHz and -19.5 dB at 3.5 GHz. VSWR is less than 1.06 for both the bands. The designed dual band MIMO antenna covers 5G bands of 2.3-2.4GHz (n30/n40), 2.4-2.5GHz (n7/n38/n41/n90), and 3.2-5.2GHz (n77/n78/n80). The experimental and simulated results observed good matching except some slight variation. This proposed dual band MIMO antenna is suitable for 5G mobile Communications.

scholarly journals Dual-Band 2 × 2 MIMO Antenna with Compact Size and High Isolation Based on Half-Mode SIW

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Abubaker Ahmed Elobied ◽  
Xue-Xia Yang ◽  
Ningjie Xie ◽  
Steven Gao
Keyword(s):  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Rectangular Patch ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Proximity Coupling

This paper presents a close-spaced dual-band 2 × 2 multiple-input multiple-output (MIMO) antenna with high isolation based on half-mode substrate integrated waveguide (HMSIW). The dual-band operation of the antenna element is achieved by loading a rectangular patch outside the radiating aperture of an HMSIW cavity. The HMSIW cavity is excited by a coaxial probe, whereas the rectangular patch is energized through proximity coupling by the radiating aperture of HMSIW. The antenna elements can be closely placed using the rotation and orthogonal arrangement for a 2 × 2 array. Small neutralization lines at the center of the MIMO antenna can increase the isolation among its elements by around 10 dB in the lower band and 5 dB in the higher band. A prototype of the MIMO antenna is fabricated and its performance is measured. The measured results show that the resonant frequencies are centered at 4.43 and 5.39 GHz with bandwidths of 110 and 80 MHz and peak gains of 6 and 6.4 dBi, respectively. The minimum isolation in both bands is greater than 35 dB. The envelope correlation coefficient is lower than 0.005 within two operating bands.

scholarly journals Watchstrap-Embedded Four-Element Multiple-Input–Multiple-Output Antenna Design for a Smartwatch in 5.2–5.8 GHz Wireless Applications

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Chia-Hao Wu ◽  
Jwo-Shiun Sun ◽  
Bo-Shiun Lu
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Three Dimensional ◽  
Antenna Design ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Plastic Materials ◽  
Monopole Antennas ◽  
Multiple Input ◽  
Input Multiple Output

This paper presents a compact four-element multiple-input–multiple-output (MIMO) antenna design operating within the WiFi 802.11 ac bands (5.2–5.84 GHz) for a smartwatch. The antenna is fabricated using a polyamide substrate and embedded into the strap of a smartwatch model; the strap is created using three-dimensional etching of plastic materials. The four-element MIMO antenna is formed by four monopole antennas, has a simple structure, and is connected to the system ground plane of the smartwatch. Due to the stub and notched block between two antennas and the slit in the system ground, the four-element MIMO antenna exhibits favorable isolation. Moreover, the envelope correlation coefficient of the antennas is considerably lower than 0.005 in the operating band. The measured −6 dB impedance bandwidths of the four elements of the antenna (Ant1–Ant4) with the human wrist encompass the WiFi 802.11 ac range of 5.2–5.84 GHz; moreover, an isolation of more than 20 dB is achieved. The measured antenna efficiency with and without a phantom hand are 45%–55% and 93%–97%, respectively.

Sign in / Sign up

Export Citation Format

Share Document