scholarly journals Applying Horizontal Diffusion on Pressure Surface to Mesoscale Models on Terrain-Following Coordinates

2005 ◽  
Vol 133 (5) ◽  
pp. 1384-1402 ◽  
Author(s):  
Hann-Ming Henry Juang ◽  
Ching-Teng Lee ◽  
Yongxin Zhang ◽  
Yucheng Song ◽  
Ming-Chin Wu ◽  
...  
Keyword(s):  
Vertical Mixing ◽  
Flow Patterns ◽  
Spectral Model ◽  
Mountain Areas ◽  
Pressure Surface ◽  
Horizontal Diffusion ◽  
Synoptic Conditions ◽  
Temperature And Humidity ◽  
Terrain Following ◽  
The Impact

Abstract The National Centers for Environmental Prediction regional spectral model and mesoscale spectral model (NCEP RSM/MSM) use a spectral computation on perturbation. The perturbation is defined as a deviation between RSM/MSM forecast value and their outer model or analysis value on model sigma-coordinate surfaces. The horizontal diffusion used in the models applies perturbation diffusion in spectral space on model sigma-coordinate surfaces. However, because of the large difference between RSM/MSM and their outer model or analysis terrains, the perturbation on sigma surfaces could be large over steep mountain areas as horizontal resolution increases. This large perturbation could introduce systematical error due to artificial vertical mixing from horizontal diffusion on sigma surface for variables with strong vertical stratification, such as temperature and humidity. This nonnegligible error would eventually ruin the forecast and simulation results over mountain areas in high-resolution modeling. To avoid the erroneous vertical mixing on the systematic perturbation, a coordinate transformation is applied in deriving a horizontal diffusion on pressure surface from the variables provided on terrain-following sigma coordinates. Three cases are selected to illustrate the impact of the horizontal diffusion on pressure surfaces, which reduces or eliminates numerical errors of mesoscale modeling over mountain areas. These cases address concerns from all aspects, including unstable and stable synoptic conditions, moist and dry atmospheric settings, weather and climate integrations, hydrostatic and nonhydrostatic modeling, and island and continental orography. After implementing the horizontal diffusion on pressure surfaces for temperature and humidity, the results show better rainfall and flow pattern simulations when compared to observations. Horizontal diffusion corrects the warming, moistening, excessive rainfall, and convergent flow patterns around high mountains under unstable and moist synoptic conditions and corrects the cooling, drying, and divergent flow patterns under stable and dry synoptic settings.

scholarly journals Response of ocean phytoplankton community structure to climate change over the 21st century: partitioning the effects of nutrients, temperature and light

2010 ◽  
Vol 7 (12) ◽  
pp. 3941-3959 ◽  
Author(s):  
I. Marinov ◽  
S. C. Doney ◽  
I. D. Lima
Keyword(s):  
Climate Change ◽  
Community Structure ◽  
Sea Ice ◽  
Phytoplankton Biomass ◽  
Phytoplankton Community ◽  
Vertical Mixing ◽  
Phytoplankton Community Structure ◽  
Marginal Sea ◽  
Small Phytoplankton ◽  
The Impact

Abstract. The response of ocean phytoplankton community structure to climate change depends, among other factors, upon species competition for nutrients and light, as well as the increase in surface ocean temperature. We propose an analytical framework linking changes in nutrients, temperature and light with changes in phytoplankton growth rates, and we assess our theoretical considerations against model projections (1980–2100) from a global Earth System model. Our proposed "critical nutrient hypothesis" stipulates the existence of a critical nutrient threshold below (above) which a nutrient change will affect small phytoplankton biomass more (less) than diatom biomass, i.e. the phytoplankton with lower half-saturation coefficient K are influenced more strongly in low nutrient environments. This nutrient threshold broadly corresponds to 45° S and 45° N, poleward of which high vertical mixing and inefficient biology maintain higher surface nutrient concentrations and equatorward of which reduced vertical mixing and more efficient biology maintain lower surface nutrients. In the 45° S–45° N low nutrient region, decreases in limiting nutrients – associated with increased stratification under climate change – are predicted analytically to decrease more strongly the specific growth of small phytoplankton than the growth of diatoms. In high latitudes, the impact of nutrient decrease on phytoplankton biomass is more significant for diatoms than small phytoplankton, and contributes to diatom declines in the northern marginal sea ice and subpolar biomes. In the context of our model, climate driven increases in surface temperature and changes in light are predicted to have a stronger impact on small phytoplankton than on diatom biomass in all ocean domains. Our analytical predictions explain reasonably well the shifts in community structure under a modeled climate-warming scenario. Climate driven changes in nutrients, temperature and light have regionally varying and sometimes counterbalancing impacts on phytoplankton biomass and structure, with nutrients and temperature dominant in the 45° S–45° N band and light-temperature effects dominant in the marginal sea-ice and subpolar regions. As predicted, decreases in nutrients inside the 45° S–45° N "critical nutrient" band result in diatom biomass decreasing more than small phytoplankton biomass. Further stratification from global warming could result in geographical shifts in the "critical nutrient" threshold and additional changes in ecology.

scholarly journals The Impact of COVID-19 on Pedestrian Flow Patterns in Urban POIs—An Example from Beijing

2021 ◽  
Vol 10 (7) ◽  
pp. 479
Author(s):  
Yihang Li ◽  
Liyan Xu
Keyword(s):  
Prevention And Control ◽  
Control Period ◽  
Flow Patterns ◽  
Control Measures ◽  
Pedestrian Flow ◽  
Prevention Measures ◽  
Government Control ◽  
Functional Categories ◽  
And Control ◽  
The Impact

The COVID-19 pandemic is a major challenge for society as a whole, and analyzing the impact of the spread of the epidemic and government control measures on the travel patterns of urban residents can provide powerful help for city managers to designate top-level epidemic prevention policies and specific epidemic prevention measures. This study investigates whether it is more appropriate to use groups of POIs with similar pedestrian flow patterns as the unit of study rather than functional categories of POIs. In this study, we analyzed the hour-by-hour pedestrian flow data of key locations in Beijing before, during, and after the strict epidemic prevention and control period, and we found that the pedestrian flow patterns differed greatly in different periods by using a composite clustering index; we interpreted the clustering results from two perspectives: groups of pedestrian flow patterns and functional categories. The results show that depending on the specific stage of epidemic prevention and control, the number of unique pedestrian flow patterns decreased from four before the epidemic to two during the strict control stage and then increased to six during the initial resumption of work. The restrictions on movement are correlated with most of the visitations, and the release of restrictions led to an increase in the variety of unique pedestrian flow patterns compared to that in the pre-restriction period, even though the overall number of visitations decreased, indicating that social restrictions led to differences in the flow patterns of POIs and increased social distance.

Numerical Investigation of a Cantilevered Compressor Stator at Varying Clearance Sizes

2015 ◽  
Author(s):  
Chengwu Yang ◽  
Xingen Lu ◽  
Yanfeng Zhang ◽  
Shengfeng Zhao ◽  
Junqiang Zhu
Keyword(s):  
Flow Field ◽  
Axial Compressor ◽  
High Flow ◽  
Leakage Flow ◽  
Streamwise Direction ◽  
Stall Margin ◽  
Axial Compressors ◽  
Pressure Surface ◽  
The Impact ◽  
Highly Loaded

The clearance size of cantilevered stators affects the performance and stability of axial compressors significantly. Numerical calculations were carried out using the commercial software FINE/Turbo for a 2.5-stage highly loaded transonic axial compressor, which is of cantilevered stator for the first stage, at varying hub clearance sizes. The aim of this work is to improve understanding of the impact mechanism of hub clearance on the performance and the flow field in high flow turning conditions. The performance of the front stage and the compressor with different hub clearance sizes of the first stator has been analyzed firstly. Results show that the efficiency decreases as clearance size varies from 0 to 3% of hub chordlength, but the operating range has been extended. For the first stage, the efficiency decreases about 0.5% and the stall margin is extended. The following analysis of detailed flow field in the first stator shows that the clearance leakage flow and elimination of hub corner separation is responsible for the increasing loss and stall margin extending respectively. The effects of hub clearance on the downstream rotor have been discussed lastly. It indicates that the loss of the rotor increases and the flow deteriorates due to increasing of clearance size and hence the leakage mass flow rate, which mainly results from the interaction of upstream leakage flow with the passage flow near pressure surface. The affected region of rotor passage flow field expands in spanwise and streamwise direction as clearance size grows. The hub clearance leakage flow moves upward in span as it flows toward downstream.

scholarly journals Forecasts covering one month using a cut-cell model

2013 ◽  
Vol 6 (4) ◽  
pp. 875-882 ◽  
Author(s):  
J. Steppeler ◽  
S.-H. Park ◽  
A. Dobler
Keyword(s):  
Cell Model ◽  
Control Model ◽  
Precipitation Forecast ◽  
Target Area ◽  
Strong Impact ◽  
Monthly Precipitation ◽  
Small Areas ◽  
Cut Cell ◽  
Terrain Following ◽  
The Impact

Abstract. This paper investigates the impact and potential use of the cut-cell vertical discretisation for forecasts covering five days and climate simulations. A first indication of the usefulness of this new method is obtained by a set of five-day forecasts, covering January 1989 with six forecasts. The model area was chosen to include much of Asia, the Himalayas and Australia. The cut-cell model LMZ (Lokal Modell with z-coordinates) provides a much more accurate representation of mountains on model forecasts than the terrain-following coordinate used for comparison. Therefore we are in particular interested in potential forecast improvements in the target area downwind of the Himalayas, over southeastern China, Korea and Japan. The LMZ has previously been tested extensively for one-day forecasts on a European area. Following indications of a reduced temperature error for the short forecasts, this paper investigates the model error for five days in an area influenced by strong orography. The forecasts indicated a strong impact of the cut-cell discretisation on forecast quality. The cut-cell model is available only for an older (2003) version of the model LM (Lokal Modell). It was compared using a control model differing by the use of the terrain-following coordinate only. The cut-cell model improved the precipitation forecasts of this old control model everywhere by a large margin. An improved, more transferable version of the terrain-following model LM has been developed since then under the name CLM (Climate version of the Lokal Modell). The CLM has been used and tested in all climates, while the LM was used for small areas in higher latitudes. The precipitation forecasts of the cut-cell model were compared also to the CLM. As the cut-cell model LMZ did not incorporate the developments for CLM since 2003, the precipitation forecast of the CLM was not improved in all aspects. However, for the target area downstream of the Himalayas, the cut-cell model considerably improved the prediction of the monthly precipitation forecast even in comparison with the modern CLM version. The cut-cell discretisation seems to improve in particular the localisation of precipitation, while the improvements leading from LM to CLM had a positive effect mainly on amplitude.

scholarly journals Development and application of the WRFPLUS-Chem online chemistry adjoint and WRFDA-Chem assimilation system

2015 ◽  
Vol 8 (6) ◽  
pp. 1857-1876 ◽  
Author(s):  
J. J. Guerrette ◽  
D. K. Henze
Keyword(s):  
Land Surface ◽  
Vertical Mixing ◽  
Model Performance ◽  
Land Surface Model ◽  
Sensitivity Study ◽  
Climate Impacts ◽  
Surface Model ◽  
Time Period ◽  
Develop Land ◽  
The Impact

Abstract. Here we present the online meteorology and chemistry adjoint and tangent linear model, WRFPLUS-Chem (Weather Research and Forecasting plus chemistry), which incorporates modules to treat boundary layer mixing, emission, aging, dry deposition, and advection of black carbon aerosol. We also develop land surface and surface layer adjoints to account for coupling between radiation and vertical mixing. Model performance is verified against finite difference derivative approximations. A second-order checkpointing scheme is created to reduce computational costs and enable simulations longer than 6 h. The adjoint is coupled to WRFDA-Chem, in order to conduct a sensitivity study of anthropogenic and biomass burning sources throughout California during the 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) field campaign. A cost-function weighting scheme was devised to reduce the impact of statistically insignificant residual errors in future inverse modeling studies. Results of the sensitivity study show that, for this domain and time period, anthropogenic emissions are overpredicted, while wildfire emission error signs vary spatially. We consider the diurnal variation in emission sensitivities to determine at what time sources should be scaled up or down. Also, adjoint sensitivities for two choices of land surface model (LSM) indicate that emission inversion results would be sensitive to forward model configuration. The tools described here are the first step in conducting four-dimensional variational data assimilation in a coupled meteorology–chemistry model, which will potentially provide new constraints on aerosol precursor emissions and their distributions. Such analyses will be invaluable to assessments of particulate matter health and climate impacts.

scholarly journals Dominant Fish and Macroinvertebrate Response to Flow Changes of the Geum River in Korea

Water ◽  
2018 ◽  
Vol 10 (7) ◽  
pp. 942 ◽  
Author(s):  
Hyeongsik Kang ◽  
Byungwoong Choi
Keyword(s):  
Flow Patterns ◽  
Base Flow ◽  
Physical Habitat ◽  
Aquatic Species ◽  
Morphology Change ◽  
Suitability Index ◽  
Natural Flow ◽  
Habitat Simulation ◽  
Target Fish ◽  
The Impact

This study presents the impact of natural flow patterns on downstream aquatic species habitats in a reach of the Geum River, Korea. The study reach is a 13.4 km long, located downstream of the Yongdam Dam. To assess such an impact, this study performed physical habitat simulations. The River2D model was used for the computation of the flow field and morphology, and the Habitat Suitability Index (HSI) model for the habitat simulation. Three habitat variables—flow depth, velocity, and substrate were used. The Zacco platypus and Baetis fuscatus were selected as the target fish and benthic macro-invertebrate, respectively. Using the building block approach (BBA), the scenarios for modifying dam operations were constructed in the study reach. Scenario 1, scenario 2, and scenario 3 were proposed by using the magnitude–duration concept, base flow allocation concept, and seasonally adjusted minimum flow allocation concept, respectively. Simulation results indicated that the scenarios’ effects significantly increased by about 14.3% for the weighted usable area (WUA). In addition, the morphology change with the restoration of flood events was investigated. It was revealed that the morphology change in the physical habitat simulations further increased by about 13% for the WUA. The change of dam operations through natural flow patterns is more advantageous to aquatic species.

scholarly journals NATURAL RESOURCES AND SUSTAINABLE DEVELOPMENT IN A MOUNTAIN ECONOMY

10.26458/1845 ◽  
2018 ◽  
Vol 18 (4) ◽  
pp. 75-93
Author(s):  
Viorica Jelev
Keyword(s):  
Water Resources ◽  
Climate Changes ◽  
Agricultural Practices ◽  
Water Shortage ◽  
Economic Activities ◽  
Research Activity ◽  
Mountain Areas ◽  
Mountain Area ◽  
Sustainable Solutions ◽  
The Impact

 This paper presents the existing situation at national and world level considering the available water resources, their vulnerability especially in the mountains areas, the impact of climate changes, the possible conflicts regarding the intensification of water shortage in some regions of the world. I also present a case study on forests in Romania. Beginning with the general data mentioned above, we point out the specific peculiarities of the mountain area hydrology for identifying some aspects which are specific to the mountain water relationship. The analysis is necessary as no specifications regarding the mountain hilly or plain areas are done in the activity regarding waters management. Waters are managed unitary on river basins considering some general principles, unanimously recognized, well reflected into the national and international regulations. As a first stage, traditional economic activities are identified in the relationship of the mountain areas inhabitants with water but also some present approaches. The way the mountain areas inhabitants knew how to live together and capitalize water resources represents a model and impulse for coming back to such sustainable solutions but capitalizing the advantages of modern technologies. Each of these activities referring to waters which take place in the mountains area can represent ways for the research activity and future thorough studies from the technical, economic, social, cultural-traditional point of view and also for environment protection. A main preoccupation might have connection with the evolution of agricultural activities in the mountains area considering the climate changes and a possible “migration” towards higher areas of some agricultural practices specific to lower areas. The paper also shows a small example of the regaining by the locals of a community of an important resource for their lives in the hands of corporations: the forests defaced by HOLZINDUSTRIE SCHWEIGHOFER and stop flooding villages. 

An experimental and simulation study of the flow pattern characteristics of water jet impingements in boreholes

2021 ◽  
pp. 014459872110520
Author(s):  
Yabin Gao ◽  
Xin Xiang ◽  
Ziwen Li ◽  
Xiaoya Guo ◽  
Peizhuang Han
Keyword(s):  
High Speed ◽  
Impact Force ◽  
Jet Impingement ◽  
Flow Patterns ◽  
Water Jet ◽  
Solid Boundary ◽  
Force Model ◽  
Water Jets ◽  
Contact Surfaces ◽  
The Impact

Hydraulic slotting has become one of the most common technologies adopted to increase permeability in low permeability in coal field seams. There are many factors affecting the rock breaking effects of water jets, among which the impact force cannot be ignored. To study the influencing effects of contact surface shapes on jet flow patterns and impact force, this study carried out experiments involving water jet impingement planes and boreholes under different pressure conditions. The investigations included numerical simulations under solid boundary based on gas–liquid coupling models and indoor experiments under high-speed camera observations. The results indicated that when the water jets impinged on different contact surfaces, obvious reflection flow occurred, and the axial velocity had changed through three stages during the development process. Moreover, the shapes of the contact surfaces, along with the outlet pressure, were found to have impacts on the angles and velocities of the reflected flow. The relevant empirical formulas were summarized according to this study's simulation results. In addition, the flow patterns and shapes of the contact surfaces were observed to have influencing effects on the impact force. An impact force model was established in this study based on the empirical formula, and the model was verified using both the simulation and experimental results. It was confirmed that the proposed model could provide important references for the optimization of the technical parameters water jet systems, which could provide theoretical support for the further intelligent and efficient transformation of coal mine drilling water jet technology.

Sign in / Sign up

Export Citation Format

Share Document