scholarly journals Characteristics of the mud shale reservoirs in coal-bearing strata and resources evaluation in the eastern margin of the Ordos Basin, China

2019 ◽  
Vol 38 (2) ◽  
pp. 372-405
Author(s):  
Yue Chen ◽  
Dongmin Ma ◽  
Yucheng Xia ◽  
Chen Guo ◽  
Fu Yang ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Specific Surface ◽  
Total Organic Carbon ◽  
Surface Area ◽  
Shale Gas ◽  
Pore Volume ◽  
Ordos Basin ◽  
Thermal Maturity ◽  
Unconventional Gas ◽  
The Ordos Basin

As the co-exploration and co-production of unconventional gas have become a new trend of the unconventional gas exploration and development in the eastern margin of the Ordos Basin, this study focuses on the distribution, pore characteristics, geochemical properties, and mineral composition of the mud shale in the coal-bearing strata. The results show that the mud shale in the coal-bearing strata is distributed relatively stably with an average cumulative thickness of 77.60 m and a buried depth of 200–2400 m, increasing from east to west. The total organic carbon content of mud shale is relatively high, ranging from 0.14% to 39.9%, and the thermal maturity ranges from 0.23% to 2.49%, affected by both buried depth and magmatic intrusion. The organic matter type of the mud shale is dominated by type III, favorable for gas generation. The mineral composition of mud shale is mainly clay minerals and quartz, with low brittle minerals content (averaging 30.34%) and high kaolinite content (averaging 59.23%). Pores and micro-fissures are relatively developed in the mud shale, dominated by intergranular pores, organic pores, and the micro-fissures developed between brittle mineral crystals, within crystals and between clay mineral particles, with a porosity of 1.05%–1.59% and a permeability of 0.001–0.142 (×10−3µm2). The specific surface area of pores in mud shale is 12.31–28.99 m2/g, and the total pore volume is 0.0146–0.0483 cm3/g. Mesopores and micropores (mainly slit shaped pores) provide the main pore volume of mud shale, and micropores contribute most of the specific surface area. The controlling factors on pore development include the total organic carbon, thermal maturity, and inorganic minerals composition. The total amount of shale gas resources is 2.49 × 1012 m3, and the Linxian-Xingxian area and Shilou-Daning area are the potential favorable zones for shale gas exploration and development.

scholarly journals Nanometer Pore Structure Characterization of Taiyuan Formation Shale in the Lin-Xing Area Based on Nitrogen Adsorption Experiments

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 298
Author(s):  
Chenlong Ding ◽  
Jinxian He ◽  
Hongchen Wu ◽  
Xiaoli Zhang
Keyword(s):  
Specific Surface ◽  
Pore Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
Shale Gas ◽  
Pore Volume ◽  
Ordos Basin ◽  
Total Pore Volume ◽  
Nitrogen Adsorption ◽  
Taiyuan Formation

Ordos Basin is an important continental shale gas exploration site in China. The micropore structure of the shale reservoir is of great importance for shale gas evaluation. The Taiyuan Formation of the lower Permian is the main exploration interval for this area. To examine the nanometer pore structures in the Taiyuan Formation shale reservoirs in the Lin-Xing area, Northern Shaanxi, the microscopic pore structure characteristics were analyzed via nitrogen adsorption experiments. The pore structure parameters, such as specific surface area, pore volume, and aperture distribution, of shale were calculated; the significance of the pore structure for shale gas storage was analyzed; and the main controlling factors of pore development were assessed. The results indicated the surface area and hole volume of the shale sample to be 0.141–2.188 m2/g and 0.001398–0.008718 cm3/g, respectively. According to the IUPAC (International Union of Pure and Applied Chemistry) classification, mesopores and macropores were dominant in the pore structure, with the presence of a certain number of micropores. The adsorption curves were similar to the standard IV (a)-type isotherm line, and the hysteresis loop type was mainly similar to H3 and H4 types, indicating that most pores are dominated by open type pores, such as parallel plate-shaped pores and wedge-shaped slit pores. The micropores and mesopores provide the vast majority of the specific surface area, functioning as the main area for the adsorption of gas in the shale. The mesopores and macropores provide the vast majority of the pore volume, functioning as the main storage areas for the gas in the shale. Total organic carbon had no notable linear correlation with the total pore volume and the specific surface area. Vitrinite reflectance (Ro) had no notable correlation with the specific surface area, but did have a low “U” curve correlation with the total pore volume. There was no relationship between the quartz content and specific surface area and total pore volume. In addition, there was no notable correlation between the clay mineral content and total specific surface area and total pore volume.

scholarly journals Micropore Characteristics and Gas-Bearing Characteristics of Marine-Continental Transitional Shale Reservoirs in the East Margin of Ordos Basin

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Yuanzhen Ma ◽  
Meng Wang ◽  
Ruying Ma ◽  
Jiamin Li ◽  
Asiya Bake ◽  
...  
Keyword(s):  
High Pressure ◽  
Specific Surface ◽  
Surface Area ◽  
Clay Minerals ◽  
Pore Volume ◽  
Ordos Basin ◽  
Gas Content ◽  
The Ordos Basin ◽  
Shale Reservoirs ◽  
Gas Bearing

In order to deeply study the exploration potential of Carboniferous-Permian marine-continental transitional shale reservoirs in the Ordos Basin, the shale samples from well Y1 in the central-southern part of the Hedong Coalfield were used as the research object. The organic geochemical test, scanning electron microscope, X-ray diffraction, and high pressure mercury injection and low-temperature nitrogen adsorption experiments have studied the microscopic characteristics and gas content characteristics of shale reservoirs. The results show that the organic matter type of the sample is type III; the TOC content ranges from 0.28% to 16.87%, with an average of 2.15%; R o is from 2.45% to 3.36%, with an average value of 2.86%; the shale pores in the study area are well developed, containing more organic pores and intergranular pores of clay minerals. Based on the two-dimensional SEM image fractal theory to study different types of pores, the fractal dimension of shale pore fracture morphology is between 2.34 and 2.50, and the heterogeneity is moderate. The high-pressure mercury intrusion experiment characterizes the pore size distribution of shale macropores and transition pores. The pore diameters are mostly nm-scale. Transition pores are the main pores of the shale in the study area. Based on the characteristics of the pore structure, the adsorption capacity and gas content of CH4 in shale reservoir were analyzed by methane isothermal adsorption and gas content experiments. The results showed that the pore volume and specific surface area were positively correlated with clay mineral content, TOC, and RO, but negatively correlated with the quartz content. In clay minerals and brittle minerals, pore volume and specific surface area are positively correlated with illite content and negatively correlated with the quartz and kaolinite content. The measured total gas content and desorbed gas content are significantly positively correlated with TOC, but are weakly positively correlated with the quartz and illite content. This study finely characterizes the physical properties, micropore characteristics, gas-bearing characteristics, and influencing factors of shale reservoirs, which has certain theoretical guiding significance for the research and development of coal-measure shale in the Ordos Basin.

scholarly journals Geochemistry and shale gas potential of the lower Permian marine-continental transitional shales in the Eastern Ordos Basin

2020 ◽  
pp. 014459872097924
Author(s):  
Jingyi Wei ◽  
Yongli Wang ◽  
Gen Wang ◽  
Zhifu Wei ◽  
Wei He
Keyword(s):  
Organic Matter ◽  
Organic Carbon ◽  
Total Organic Carbon ◽  
Shale Gas ◽  
Higher Plants ◽  
Ordos Basin ◽  
Organic Matter Content ◽  
Lower Permian ◽  
Gas Desorption ◽  
Geochemical Parameters

Marine–continental transitional strata were widely developed in the Ordos Basin in Upper Carboniferous - Lower Permian. The Taiyuan - Shanxi Formation possesses promising shale gas exploration layers. Shale samples from two drilling wells of Shanxi-Taiyuan Formation in Shilou and Xixian, Ordos Basin, were investigated to study their carbon–sulfur contents and distribution characteristics of organic components using carbon/sulfur analyzer and gas chromatography–mass spectroscopy. Using results of total organic carbon analyses, Rock-Eval pyrolysis, X-ray diffraction analysis, shale gas desorption experiments, and other relevant experimental data, the shale samples were comprehensively analyzed. The exploitability of the shale in the study area was evaluated. The Shanxi-Taiyuan Shale in the Shilou and Xixian areas was characterized by high total organic carbon contents of 7.1% and 2.1% and high Tmax values of 499 and 505 °C, respectively. The organic matter of the shale is types II2 and III. Moreover, biomarker parameters including n-alkanes, Paq, Pwax, average carbon chain length, and the ternary diagram of C27-C28-C29 steranes show the organic matter constituted terrestrial higher plants and aquatic low biological algae. Multiple n-alkane parameters show the organic matter input in the Shilou area is mainly derived from terrestrial higher plants. The Pr/Ph value and trace element indicators show the deposition environment is dominated by weak oxidation–reduction conditions. A shale gas desorption experiment shows the average desorbed gas contents of the shale samples in the Shilou and Xixian areas were 1.79 and 0.37 m3/t, respectively. The organic matter content determined the differences in shale gas properties between the two areas in Ordos Basin. The composition and content of inorganic minerals affect the reservoir physical properties. According to the analyses, the shale in the Shilou area has good shale gas reservoir characteristics in terms of desorbed gas content and the above-mentioned geochemical parameters. Furthermore, the Shanxi shale has good potential for shale gas industrial exploitation.

scholarly journals Shale favorable area optimization in coal-bearing series: A case study from the Shanxi Formation in Northern Ordos Basin, China

2017 ◽  
Vol 36 (5) ◽  
pp. 1295-1309 ◽  
Author(s):  
Wei Guo ◽  
Weijun Shen ◽  
Shangwen Zhou ◽  
Huaqing Xue ◽  
Dexun Liu ◽  
...  
Keyword(s):  
Organic Matter ◽  
Organic Carbon ◽  
Total Organic Carbon ◽  
Shale Gas ◽  
Ordos Basin ◽  
Sedimentary Facies ◽  
Gas Content ◽  
Burial Depth ◽  
Organic Carbon Content ◽  
River Channels

Shales in the Well district of Yu 106 of the Shanxi Formation in the Eastern Ordos Basin is deposited in the swamp between delta plains, distributary river channels, natural levee, the far end of crevasse splay, and depression environments. According to organic geochemistry, reservoir physical property, gas bearing capacity, lithology experimental analysis, combined with the data of drilling, logging, testing and sedimentary facies, the reservoir conditions of shale gas and the distribution of an advantageous area in Shanxi Formation have been conducted. The results show that the total organic carbon content of the Shanxi Formation is relatively high, with an average content value of 5.28% in the segment 2 and 3.02% in segment 1, and the organic matter is mainly kerogen type II2 and III. The maturity of organic matter is high with 1.89% as the average value of Ro which indicates the superior condition for gas generation of this reservoir. The porosity of shales is 1.7% on average, and the average permeability is 0.0415 × 10−3 µm2. The cumulative thickness is relatively large, with an average of 75 m. Brittle mineral and clay content in shales are 49.9% and 50.1%, respectively, but the burial depth of shale is less than 3000 m. The testing gas content is relatively high (0.64 × 104 m3/d), which shows a great potential in commercial development. The total organic carbon of the segment 2 is higher than that of the segment 1, and it is also better than segment 1 in terms of gas content. Based on the thickness of shale and the distribution of sedimentary facies, it is predicted that the advantageous area of shale gas in the segment 2 is distributed in a striped zone along the northeast and the northsouth direction, which is controlled by the swamp microfacies between distributary river channels.

scholarly journals Pore Structures of the Lower Permian Taiyuan Shale and Limestone in the Ordos Basin and the Significance to Unconventional Natural Gas Generation and Storage

Geofluids ◽  
2022 ◽  
Vol 2022 ◽  
pp. 1-16
Author(s):  
L. Zhang ◽  
Q. Zhao ◽  
C. Wu ◽  
Z. Qiu ◽  
Q. Zhang ◽  
...  
Keyword(s):  
Organic Matter ◽  
Natural Gas ◽  
Shale Gas ◽  
Pore Volume ◽  
Ordos Basin ◽  
Source Rocks ◽  
Taiyuan Formation ◽  
Oil Generation ◽  
Unconventional Natural Gas ◽  
The Ordos Basin

In the Ordos Basin, multiple sets of coal seams, organic-rich shale, and limestone are well developed in the Permian Taiyuan Formation, which are favorable targets for collaborative exploration of various types of unconventional natural gas resources, including coalbed methane, shale gas, and tight gas. In this study, core samples from the Permian Taiyuan Formation in the eastern margin of the Ordos Basin were used to carry out a series of testing and analysis, such as the organic matter characteristics, the mineral composition, and the pore development characteristics. In the shale of the Taiyuan Formation, the total organic carbon (TOC) content is relatively high, with an average of 5.38%. A thin layer of black shale is developed on the top of the Taiyuan Formation, which is relatively high in TOC content, with an average of 9.72%. The limestone in the Taiyuan Formation is also relatively high in organic matter abundance, with an average of 1.36%, reaching the lower limit of effective source rocks (>1%), being good source rocks. In the shale of the Taiyuan Formation, various types of pores are well developed, with relatively high overall pore volume and pore-specific surface area, averaging 0.028 ml/g and 13.28 m2/g, respectively. The pore types are mainly mineral intergranular pores and clay mineral interlayer fractures, while organic matter-hosted pores are poorly developed. The limestone of the Taiyuan Formation is relatively tight, with lower pore volume and pore-specific surface area than those of shale, averaging 0.0106 ml/g and 2.72 m2/g, respectively. There are mainly two types of pores, namely, organic matter-hosted pores and carbonate mineral dissolution pores, with a high surface pore rate. The organic matter in the limestone belongs to the oil-generation kerogen. During thermal evolution, the organic matter has gone through the oil-generation window, generating a large number of liquid hydrocarbons, which were cracked into a large number of gaseous hydrocarbons at the higher mature stage. As a result, a large number of organic matter-hosted pores were generated. The study results show that in the Ordos Basin, the shale and limestone of the Permian Taiyuan Formation have great potential in terms of unconventional natural gas resources, providing a good geological basis for the collaborative development of coal-bearing shale gas and tight limestone gas in the Taiyuan Formation.

scholarly journals Evaluation of coal and shale reservoir in Permian coal-bearing strata for development potential: A case study from well LC-1# in the northern Guizhou, China

2018 ◽  
Vol 37 (1) ◽  
pp. 194-218 ◽  
Author(s):  
Hongjie Xu ◽  
Shuxun Sang ◽  
Jingfen Yang ◽  
Jun Jin ◽  
Huihu Liu ◽  
...  
Keyword(s):  
Specific Surface ◽  
Pore Size ◽  
Surface Area ◽  
Specific Surface Area ◽  
Shale Gas ◽  
Pore Volume ◽  
Coalbed Methane ◽  
Total Pore Volume ◽  
Gas Content ◽  
Bet Specific Surface Area

Indentifying reservoir characteristics of coals and their associated shales is very important in understanding the co-exploration and co-production potential of unconventional gases in Guizhou, China. Accordingly, comprehensive experimental results of 12 core samples from well LC-1# in the northern Guizhou were used and analyzed in this paper to better understand their vertical reservoir study. Coal and coal measured shale, in Longtan Formation, are rich in organic matter, with postmature stage of approximately 3.5% and shales of type III kerogen with dry gas generation. All-scale pore size analysis indicates that the pore size distribution of coal and shale pores is mainly less than 20 nm and 100 nm, respectively. Pore volume and area of coal samples influenced total gas content as well as desorbed gas and lost gas content. Obvious relationships were observed between residual gas and BET specific surface area and BJH total pore volume (determined by nitrogen adsorption). For shale, it is especially clear that the desorbed gas content is negatively correlated with BET specific surface area, BJH total pore volume and clay minerals. However, the relationships between desorbed gas and TOC (total organic carbon) as well as siderite are all well positive. The coals and shales were shown to have similar anoxic conditions with terrestrial organic input, which is beneficial to development of potential source rocks for gas. However, it may be better to use a low gas potential assessment for shales in coal-bearing formation because of their low S1+S2 values and high thermal evolution. Nevertheless, the coalbed methane content is at least 10 times greater than the shale gas content with low desorbed gases, indicating that the main development unconventional natural gas should be coalbed methane, or mainly coalbed methane with supplemented shale gas.

Fuels Desulphurisation by Adsorbtion on Fe / Bentonite

2017 ◽  
Vol 68 (3) ◽  
pp. 483-486
Author(s):  
Constantin Sorin Ion ◽  
Mihaela Bombos ◽  
Gabriel Vasilievici ◽  
Dorin Bombos
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Pore Volume ◽  
Pore Diameter ◽  
Adsorption Process ◽  
Continuous System ◽  
Gas Oil ◽  
Average Pore ◽  
Atmospheric Distillation

Desulfurisation of atmospheric distillation gasoline and gas oil was performed by adsorption process on Fe/ bentonite. The adsorbent was characterized by determining the adsorption isotherms, specific surface area, pore volume and average pore diameter. Adsorption experiments of atmospheric distillation gasoline and gas oil were performed in continuous system at 280�320oC, 5 atm and volume hourly space velocities of 1�2 h-1. The efficiency of adsorption on Fe / bentonite was better at desulphurisation of gasoline versus gas oil.

scholarly journals Titanium Carbide Nanocrystals Synthesized from a Metatitanic Acid-Sucrose Precursor via a Carbothermal Reduction

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Hyunho Shin ◽  
Jun-Ho Eun
Keyword(s):  
Process Control ◽  
Titanium Carbide ◽  
Specific Surface ◽  
Surface Area ◽  
Pore Volume ◽  
Carbothermal Reduction ◽  
Crystal Size ◽  
Reduction Process ◽  
Specific Pore Volume ◽  
Metatitanic Acid

A TiC powder is synthesized from a micron-sized mesoporous metatitanic acid-sucrose precursor (precursor M) by a carbothermal reduction process. Control specimens are also prepared using a nanosized TiO2-sucrose precursor (precursor T) with a higher cost. When synthesized at 1500°C for 2 h in flowing Ar, the characteristics of the synthesized TiC from precursor M are similar to those of the counterpart from precursor T in terms of the crystal size (58.5 versus 57.4 nm), oxygen content (0.22 wt% versus 0.25 wt%), and representative sizes of mesopores: approximately 2.5 and 19.7–25.0 nm in both specimens. The most salient differences of the two specimens are found in the TiC from precursor M demonstrating (i) a higher crystallinity based on the distinctive doublet peaks in the high-two-theta XRD regime and (ii) a lower specific surface area (79.4 versus 94.8 m2/g) with a smaller specific pore volume (0.1 versus 0.2 cm3/g) than the counterpart from precursor T.

The relationship between geotechnical index properties and the pore-size distribution of compacted clayey silts

2015 ◽  
Vol 22 (6) ◽  
Author(s):  
Nazile Ural
Keyword(s):  
Specific Surface ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Surface Area ◽  
Specific Surface Area ◽  
Pore Volume ◽  
Correlation Coefficients ◽  
Liquid Limit ◽  
Index Properties

AbstractIn this study, the relationships between geotechnical index properties and the pore-size distribution of compacted natural silt and artificial soil mixtures, namely, silt with two different clays and three different clay percentages (10%, 20%, and 40%), were examined and compared. Atterberg’s limit tests, standard compaction tests, mercury intrusion porosimetry, X-ray diffraction, scanning electron microscopy (SEM) analysis, and Brunauer-Emmett-Teller specific surface analysis were conducted. The results show that the liquid limit, the cumulative pore volume, and specific surface area of artificially mixed soils increase with an increase in the percentage of clay. The cumulative pore volume and specific surface area with geotechnical index properties were compared. High correlation coefficients were observed between the specific areas and both the liquid limit and the plasticity index, as well as between the cumulative pore volume and both the clay percentage and the

Sign in / Sign up

Export Citation Format

Share Document