Genotoxicity Screening of Leachates from Solid Industrial Wastes Evaluated with the Allium Test

1997 ◽  
Vol 25 (3) ◽  
pp. 311-321 ◽  
Author(s):  
Peter G. Odeigah ◽  
Jide Ijimakinwa ◽  
Bimbo Lawal ◽  
Rebecca Oyeniyi

Six solid wastes from the metal industry, from the chemical industry and from the production of pesticides were investigated for their toxic and genotoxic properties by using the Allium test. To simulate environmental conditions and better assess their environmental impact, the solid wastes were leached with water, and the water-extractable micropollutants were lyophilised before screening. The mean root lengths of onions exposed to different concentrations of the leachates were measured, and EC50 values were determined from the growth curves. The EC50 values of the wastes were ranked, in the order: organochlorine pesticide waste, settling tank sludge from a chemical company, paint sludge, lead slag, steel slag and aluminium slag. The leachates were also mitodepressive, and caused significant increases in the frequency of chromosome aberrations. These results demonstrate that the Allium test is a useful screening test for the evaluation and ranking of toxic industrial waste.

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Iñigo Ortega-Fernández ◽  
Javier Rodríguez-Aseguinolaza ◽  
Antoni Gil ◽  
Abdessamad Faik ◽  
Bruno D’Aguanno

Slag is one of the main waste materials of the iron and steel manufacturing. Every year about 20 × 106 tons of slag are generated in the U.S. and 43.5 × 106 tons in Europe. The valorization of this by-product as heat storage material in thermal energy storage (TES) systems has numerous advantages which include the possibility to extend the working temperature range up to 1000 °C, the reduction of the system cost, and at the same time, the decrease of the quantity of waste in the iron and steel industry. In this paper, two different electric arc furnace (EAF) slags from two companies located in the Basque Country (Spain) are studied. Their thermal stability and compatibility in direct contact with the most common heat transfer fluids (HTFs) used in the concentrated solar power (CSP) plants are analyzed. The experiments have been designed in order to cover a wide range of temperature up to the maximum operation temperature of 1000 °C corresponding to the future generation of CSP plants. In particular, three different fluids have been studied: synthetic oil (Syltherm 800®) at 400 °C, molten salt (Solar Salt) at 500 °C, and air at 1000 °C. In addition, a complete characterization of the studied slags and fluids used in the experiments is presented showing the behavior of these materials after 500 hr laboratory-tests.


2018 ◽  
Vol 30 (1) ◽  
pp. 65-76 ◽  
Author(s):  
Michela Vignoli ◽  
Marco Giovanni Mariani ◽  
Dina Guglielmi ◽  
Francesco Saverio Violante

Purpose This study aims to investigate the factors that can influence the transfer process of training in open skills, i.e. non-technical skills (NTS). Specifically, according to the model of the transfer process, the aim of this paper is to analyse the effects of both personal (e.g. self-efficacy) and work environment (e.g. safety leadership styles) antecedents of intention to transfer. Design/methodology/approach A total of 88 workers belonging to two different plants of the same chemical company filled in a questionnaire at the beginning (T1) and at the end (T2) of the training intervention. The majority of the sample was composed of men (95.5 per cent), with the mean age being 45.19 years old, and they had worked in the same company for an average of 17.2 years. Personal (self-efficacy) and organizational (transformational and passive leadership) factors were measured at T1, while intention to transfer was measured at T2. To investigate the combined effect of both personal and environmental characteristics on the transfer process, a moderation analysis was conducted following the Preacher and Hayes approach. Findings Results showed that all the antecedents investigated (except for passive leadership) impacted on the intention to transfer. Furthermore, high levels of self-efficacy combined with higher levels of transformational leadership resulted in higher levels of intention to transfer. Research limitations/implications The sample size is quite small, and effective transfer of NTS has not been measured. Practical implications Results suggest that organizations should focus on fostering self-efficacy of the trainees and transformational leadership of the supervisors so as to facilitate the transfer process of NTS. Originality/value To the best of the authors’ knowledge, this is the first study which has considered both individual and contextual characteristics to analyse the transfer process of NTS.


Author(s):  
Kalpana Patel ◽  
Adarsh Patel

Excessive use of materials, leads to industrialization, which has an adverse impact on the environment. From industries, large amount of chemicals or other suspended particles as a waste are produced, which are mostly dumped that acquires large space leading to deterioration of soil properties. So, we should use these waste for some constructive or useful purposes. As steel industry releases waste with some good engineering properties so, we can use this type of waste with soil which has low strength and does not have good engineering properties. Various techniques are available like soil stabilization, providing reinforcement etc. to improve load bearing capacity of soil. Soil stabilization is one of the modification techniques used to improve the geotechnical properties of soil and has become the major practice in construction engineering which enables the effective utilization of industrial wastes as a stabilizer. This technique becomes more popular because of its easy availability and adaptability. In this study, the steel slag (an industrial waste) is mixed with Clay(CI), Lateritic(A-7-6(5)) , Black cotton clay soil to enhance its strength properties and make them more suitable for use. In this way industrial waste can be reduced economically.


RSC Advances ◽  
2014 ◽  
Vol 4 (14) ◽  
pp. 6858-6862 ◽  
Author(s):  
Si-cong Tian ◽  
Jian-guo Jiang ◽  
Kai-min Li ◽  
Feng Yan ◽  
Xue-jing Chen

The carbonation–calcination looping route of steel slag can significantly improve its CO2capture capacity compared to the conventional route of direct carbonation sequestration, thus providing an alternative and more feasible option for the use of alkaline industrial wastes to capture CO2from industrial flue gases.


2016 ◽  
Vol 16 (1) ◽  
pp. 65-77 ◽  
Author(s):  
Monika Michalczuk ◽  
Krzysztof Damaziak ◽  
Antoni Goryl

Abstract The study analyzed the growth of medium-growing chickens of the CCGP experimental line, using Gompertz, Logistic, and Richards models as well as body gain curves. The birds were reared until 9 wk of age. To fit BW values to the applied models, determination coefficients (R2,Ř2) and standard error of the mean (±SE) were calculated for 487 male and 493 female chickens. The comparison of results obtained demonstrated the Gompertz model to be the most precise equation to describe the growth of both sexes of CCGP chickens, though in all examined models the determination coefficients were approximating 99%. According to the Gompertz model, the chickens may reach the maximum BW at the age of 16 wk (5900 g - males and 4000 g - females), whereas the maximum daily BW gain - on day 47 (69.0 g) in males and on day 41 (50.0 g) in females. Values achieved in the Logistic model were the most diverging from the values obtained with other models, whereas the Richards model may be successfully applied to estimate BW of chickens. Females were reaching the maximum BW gains earlier, but the curve of their BW gain was proceeding with two peaks (at ca. 4 wk - 313.09 g/wk and at 6 wk - 327.59 g/wk), which was probably due to partial growth deceleration as a result of allowing the birds to use free ranges on day 14. In the case of males, the maximum BW gain (727.35 g/wk) was reached at 6.2 wk.


Author(s):  
Luis Pardo-Galán ◽  
Raquel Pastor-Cisneros ◽  
Daniel Collado-Mateo ◽  
José Adsuar ◽  
Miguel García-Gordillo ◽  
...  

The anthropometric reference data used to examine the growth pattern of children in Spain are obtained from studies carried out several years ago. In the region of Extremadura, the tables obtained by the Faustino Obergozo Foundation, which date back to 2004, are used. The first objective of this work is to develop growth tables and graphs that accurately reflect the somatometric variables of children in Extremadura. Secondly, the averages of these variables by sex will be compared to determine if there are significant differences between them. A database provided by the General Directorate of Planning, Training, and Health and Social Quality of the Regional Government of Extremadura was used, which contains the measurements of height, weight, and body mass index (BMI) of boys and girls in Extremadura between the years 2006–2016. The database was analyzed using the Statistical Package for the Social Sciences (SPSS) version 23 and the R software version 3.5.1, considering a cross-sectional study. As a result, the tables and growth graphs of Extremadura’s population base for weight and height are presented, from birth to 10 years, as well as comparisons of the average values of the analyzed variables between boys and girls. We found that there are significant differences in the mean values, according to sex, of the height and weight. On the other hand, BMI progressed normally when comparing the results of the Extremadura population with those reflected by the World Health Organization (WHO). Differences were found when comparing the results with those obtained by the Faustino Orbegozo Foundation.


2021 ◽  
Author(s):  
Laura Castro ◽  
M. Luisa Blázquez ◽  
Felisa González ◽  
Jesús A. Muñoz

Rare earth elements (REEs) are critical raw materials and are attracting interest because of their applications in novel technologies and green economy. Biohydrometallurgy has been used to extract other base metals; however, bioleaching studies of REE mineral extraction from mineral ores and wastes are yet in their infancy. Mineral ores have been treated with a variety of microorganisms. Phosphate-solubilizing microorganims are particularly relevant in the bioleaching of monazite because transform insoluble phosphate into more soluble form which directly and/or indirectly contributes to their metabolism. The increase of wastes containing REEs turns them into an important alternative source. The application of bioleaching techniques to the treatment of solid wastes might contribute to the conversion towards a more sustainable and environmental friendly economy minimizing the amount of tailings or residues that exert a harmful impact on the environment.


2021 ◽  
Vol 18 (1) ◽  
pp. 39
Author(s):  
Ani Maslina Saleh ◽  
Mohamad Nidzam Rahmat ◽  
Norsalisma Ismai

Uncontrolled infrastructure development may produce excessive carbon emission and scarcity of natural resources. The reuse of waste materials in general promotes material ecology and the cradle-to-cradle concept. The utilisation of industrial waste in the development of advanced materials promoting the extensive research on sustainable building components. The main objective of this research is to investigate the potential of utilising local industrial waste, Solid Waste Fly Ash (SwFA) and Paint Sludge (PS) as target material in replacing laterite soil that is non-renewable natural resources. Standard industrial size bricks were fabricated consist the combination of Laterite Clay, SwFA and PS (LSP) at 50:25:25 ratios. The results for engineering and environmental properties were within the acceptable of engineering standards and performances. This test result suggests potential used of SwFA and Paint Sludge as substitute to clay for unfired brick. This will certainly contribute to the recycling of SwFA and industrial sludge (Paint Sludge andpossibly others) and hence to minimise the impact of these by-product to the environment if send to landfill. The manufacture of unfired bricks can exploit locally available waste materials and can be used in certain applications of low load bearing situation. This research also suggests innovation and enhanced waste management and contribution towards the concept of green building components.  Keywords: Industrial waste, eco-bricks, durability, thermal, acoustic


Minerals ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 6
Author(s):  
Jiajian Li ◽  
Shuai Cao ◽  
Erol Yilmaz

Using solid wastes (SWs) as backfilling material to fill underground mined-out areas (UMOAs) solved the environmental problems caused by SWs and reduced the backfilling cost. In this study, fly ash (FA), gypsum and steel slag (SS) were used to prepare cement-based composites (CBC). The uniaxial compression, computed tomography (CT) and scanning electron microscope (SEM) laboratory experiments were conducted to explore the macro and micromechanical properties of CBC. The findings showed that the uniaxial compressive strength (UCS) of CBC with a curing time of 7 d could reach 6.54 MPa. The increase of SS content reduced the UCS of CBC, while the gypsum and FA content could increase the UCS of CBC. Microscopic studies have shown that the SS particles in CBC have noticeable sedimentation, and the increase of SS content causes the failure mode of CBC from tensile to tensile-shear. These research results can provide a scientific reference for the preparation of backfilling materials.


2018 ◽  
Vol 44 (1) ◽  
pp. 6
Author(s):  
Michelli De Fátima Sieklicki ◽  
Victor Breno Pedrosa ◽  
Caroline Gomes Rocha ◽  
Raphael Patrick Moreira ◽  
Paula Roberta Falcão ◽  
...  

Background: The consumption of lamb meat is growing due to improved farming methods. However, to be economically feasible, the animal should stand out for its precocity, fast finishing and muscular force, such as seen in Texel breed. Besides, knowledge about weight gain and development can facilitate the selection of the best animals, and allow a better fitting to farming systems. Growth curves are an effective method that describes animal development, modeling the relationship between weight and age and help to predict the growth rate. Thus, this study aimed to analyze which nonlinear model, including Brody, Gompertz, Von Bertalanffy and Logistic best describe the growth curve of Texel sheep.Materials, Methods & Results: In this experiment, the lambs were kept in confined system while the ewes, in a semi-extensive system. This study followed 42 Texel male lambs, which were confined from birth to slaughter, and fed concentrated feed (3% of body weight) and corn silage (average 1.5 kg/animal/day), 4 times a day. The lambs were weighed fortnightly, in different classes considered as follows, weight at birth (BW), 15 days (P15), 30 days (P30), 45 days (P45), 60 days (P60), 75 days (P75), 90 days (P90), 105 days (P105), and 120 days (P120), which was defined as the slaughtering weight. The growth curves were determined using the nonlinear models of Brody, Von Bertalanffy, Gompertz and Logistic. The following parameters were used in the curves, Y, slaughtering weight; A, asymptotic weight; k, growth rate, t, animal age; B, constant related to the initial weight; and, m, constant of the curve shape. The criteria used for selecting the model that best described the curve were the mean square error (MSE), which was calculated by dividing the sum of squared error by the number of observations, and also the coefficient of determination (R²), calculated as the square of the correlation between the observed and estimated weights. The average weights observed were as follows, 4.02 kg at birth, 21.68 kg at weaning (P60) and 32.55 kg at slaughtering (P120). The solution of the nonlinear models allows, thru the parameters, establish specific feeding programs and define the optimal slaughtering age. Furthermore, the coefficients of determination, with values close to 97.3%, showed good fits for all models. Still, considering the mean square error, where the lower value indicates the best fit to the data evaluated, the results were 13.1564 (Brody), 13.3421 (Von Bertalanffy), 13.4876 (Gompertz) and 13.6717 (Logistic). The results showed that Brody could be considered the model that best describes the growth rate up to 120 days old of Texel lambs.Discussion: Compared to other studies, the average weights obtained in the experiment varied widely. This large variation can be explained by the used rearing system that might favor or not the performance of lambs. However, the average weaning weight obtained was similar to several studies in the literature, confirming the potential of Texel breed. This breed demonstrated to be capable to provide a precocious animal, with good growth results from the early developmental stage until the slaughtering age. Regarding the growth curves, the Brody model was the best fit for the estimated and observed weights. Moreover, the coefficient of determination indicated good fits for all models. However, an important aspect is the negative correlation between the A and k parameters, demonstrating that the higher the animal growth rate, the lower its asymptotic size.


Sign in / Sign up

Export Citation Format

Share Document