scholarly journals Three-dimensional printing-assisted anterior and posterior combined surgery for treating a giant aggressive vertebral hemangioma

2022 ◽  
Vol 50 (1) ◽  
pp. 030006052110686
Author(s):  
Jing-Li Liu ◽  
Xin-Gen Liao ◽  
Xi-An Dai ◽  
Ji-Huan Zeng ◽  
Liang Deng ◽  
...  
Keyword(s):  
Spinal Cord ◽  
3D Printing ◽  
Neck Pain ◽  
Three Dimensional ◽  
Vertebral Hemangioma ◽  
Combined Surgery ◽  
Three Dimensional Printing ◽  
Imaging Examination ◽  
Vertebral Bodies ◽  
Dimensional Printing

Aggressive vertebral hemangioma (AVH) is a type of non-neoplastic and congenital developmental abnormality of spinal cord blood vessels. We report the innovative application of three-dimensional (3D) printing-assisted anterior and posterior combined surgery for treating a giant AVH. This could be a novel treatment in the future. A 44-year-old man suffered from persistent neck pain and limited limb mobility for approximately 2 weeks. An imaging examination showed the destruction of C2–4 vertebral bodies, and a giant lesion invaded the spinal cord. He underwent 3D printing-assisted anterior and posterior combined surgery. Postoperatively, his symptoms of persistent neck pain and limited limb mobility were alleviated. An imaging examination showed that internal fixation and the prosthesis were fixed in place, and the spinal canal was unobstructed. Treating a giant AVH by 3D printing-assisted anterior and posterior combined surgery is feasible and effective.

scholarly journals Transfiguring Healthcare: Three-Dimensional Printing in Pharmaceutical Sciences; Trends during COVID-19: A Review

2021 ◽  
pp. 207-218
Author(s):  
K. G. Siree ◽  
T. M. Amulya ◽  
T. M. Pramod Kumar ◽  
S. Sowmya ◽  
K. Divith ◽  
...  
Keyword(s):  
3D Printing ◽  
Medical Devices ◽  
Three Dimensional ◽  
Pharmaceutical Sciences ◽  
Three Dimensional Printing ◽  
Custom Made ◽  
High Degree ◽  
The Impact ◽  
Dimensional Printing ◽  
Shed Light

Three-dimensional (3D) printing is a unique technique that allows for a high degree of customisation in pharmacy, dentistry and in designing of medical devices. 3D printing satiates the increasing exigency for consumer personalisation in these fields as custom-made medicines catering to the patients’ requirements are novel advancements in drug therapy. Current research in 3D printing indicates towards reproducing an organ in the form of a chip; paving the way for more studies and opportunities to perfecting the existing technique. In addition, we will also attempt to shed light on the impact of 3D printing in the COVID-19 pandemic.

scholarly journals Three-dimensional printing for device selection in cardiology: Several key points should not be neglected

2016 ◽  
Author(s):  
Hongxing Luo ◽  
Zhongmin Wang
Keyword(s):  
3D Printing ◽  
Clinical Medicine ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
Image Postprocessing ◽  
Key Points ◽  
Study Results ◽  
Recent Developments ◽  
3D Transesophageal Echocardiography ◽  
Dimensional Printing

We comment on the recent developments and problems of three-dimensional printing in cardiology. Since there are currently no standards or consensuses for 3D printing in clinical medicine and the technology is at its infancy in cardiology, it’s very important to detail the procedures to allow more similar studies to further our understandings of this novel technology. Most studies have employed computed tomography to obtain source data for 3D printing, the use of real-time 3D transesophageal echocardiography for data acquisition remains rare, so it would be very valuable and inspiring to detail the image postprocessing steps, or the reliability of the study results will be doubtful.

scholarly journals Comparison of Presurgical Dental Models Manufactured with Two Different Three-Dimensional Printing Techniques

2020 ◽  
Vol 2020 ◽  
pp. 1-6 ◽  
Author(s):  
Marcin Metlerski ◽  
Katarzyna Grocholewicz ◽  
Aleksandra Jaroń ◽  
Mariusz Lipski ◽  
Grzegorz Trybek ◽  
...  
Keyword(s):  
3D Printing ◽  
Oral Surgery ◽  
Three Dimensional ◽  
Mean Deviation ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
Reference Models ◽  
3D Printing Technology ◽  
Dimensional Printing ◽  
Printing Time

Three-dimensional printing is a rapidly developing area of technology and manufacturing in the field of oral surgery. The aim of this study was comparison of presurgical models made by two different types of three-dimensional (3D) printing technology. Digital reference models were printed 10 times using fused deposition modelling (FDM) and digital light processing (DLP) techniques. All 3D printed models were scanned using a technical scanner. The trueness, linear measurements, and printing time were evaluated. The diagnostic models were compared with the reference models using linear and mean deviation for trueness measurements with computer software. Paired t-tests were performed to compare the two types of 3D printing technology. A P value < 0.05 was considered statistically significant. For FDM printing, all average distances between the reference points were smaller than the corresponding distances measured on the reference model. For the DLP models, the average distances in the three measurements were smaller than the original. Only one average distance measurement was greater. The mean deviation for trueness was 0.1775 mm for the FDM group and 0.0861 mm for the DLP group. Mean printing time for a single model was 517.6 minutes in FDM technology and 285.3 minutes in DLP. This study confirms that presurgical models manufactured with FDM and DLP technologies are usable in oral surgery. Our findings will facilitate clinical decision-making regarding the best 3D printing technology to use when planning a surgical procedure.

Manufacture of an Unmanned Aerial Vehicle (UAV) for Advanced Project Design Using 3D Printing Technology

2013 ◽  
Vol 397-400 ◽  
pp. 970-980 ◽  
Author(s):  
Noor A. Ahmed ◽  
J.R. Page
Keyword(s):  
3D Printing ◽  
Unmanned Aerial Vehicle ◽  
Three Dimensional ◽  
Small Scale ◽  
Project Design ◽  
Test Model ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
Aerial Vehicle ◽  
Dimensional Printing

The phenomenal growth in three-dimensional printing technology has the potential of ushering in the next wave of industrial revolution. As part of an advanced project design conducted at the Aerospace Engineering of the University of New South, the concept of a printable unmanned aerial vehicle was explored. A subsequent small scale test model was manufactured using three-dimensional printing technology for wind tunnel testing and validation. The exercise demonstrates the huge potential of such printing technology in future aircraft designs.Key words: 3D printing, design, manufacture, UAV

scholarly journals Current research in development of polycaprolactone filament for 3D bioprinting: a review

2021 ◽  
Vol 926 (1) ◽  
pp. 012080
Author(s):  
C Amni ◽  
Marwan ◽  
S Aprilia ◽  
E Indarti
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Development Stage ◽  
Biological Properties ◽  
Fabrication Process ◽  
3D Bioprinting ◽  
Three Dimensional Printing ◽  
Further Development ◽  
Dimensional Printing ◽  
The Ideal

Abstract Three-dimensional printing (3DP) provides a fast and easy fabrication process without demanding post-processing. 3D-bioprinting is a special class in 3DP. Bio-printing is the process of accurately 3DP structural design using filament. 3D bio-printing technology is still in the development stage, its application in various engineering continues to increase, such as in tissue engineering. As a forming material in 3D printing, many types of commercial filaments have been developed. Filaments can be produced from either natural or synthetic biomaterials alone, or a combination of the two as a hybrid material. The ideal filament must have precise mechanical, rheological and biological properties. Polycaprolactone (PCL) is specifically developed and optimized for bio-printing of 3D structures. PCL is a strategy in 3D printing to better control interconnectivity and porosity spatially. Structural stability and less sensitive properties environmental conditions, such as temperature, humidity, etc make PCL as an ideal material for the FDM fabrication process. In this review, we provide an in-depth discussion of current research on PCL as a filament currently used for 3D bio-printing and outline some future perspectives in their further development.

scholarly journals Three-Dimensional Printing Strategies for Irregularly Shaped Cartilage Tissue Engineering: Current State and Challenges

2022 ◽  
Vol 9 ◽  
Author(s):  
Hui Wang ◽  
Zhonghan Wang ◽  
He Liu ◽  
Jiaqi Liu ◽  
Ronghang Li ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Cartilage Tissue Engineering ◽  
Three Dimensional ◽  
Cartilage Tissue ◽  
Future Research ◽  
Engineering Construction ◽  
Three Dimensional Printing ◽  
Current State ◽  
Dimensional Printing

Although there have been remarkable advances in cartilage tissue engineering, construction of irregularly shaped cartilage, including auricular, nasal, tracheal, and meniscus cartilages, remains challenging because of the difficulty in reproducing its precise structure and specific function. Among the advanced fabrication methods, three-dimensional (3D) printing technology offers great potential for achieving shape imitation and bionic performance in cartilage tissue engineering. This review discusses requirements for 3D printing of various irregularly shaped cartilage tissues, as well as selection of appropriate printing materials and seed cells. Current advances in 3D printing of irregularly shaped cartilage are also highlighted. Finally, developments in various types of cartilage tissue are described. This review is intended to provide guidance for future research in tissue engineering of irregularly shaped cartilage.

scholarly journals Utility of Three-Dimensional Printing for Preoperative Assessment of Children with Extra-Cranial Solid Tumors: A Systematic Review

2022 ◽  
Vol 14 (1) ◽  
pp. 32-39
Author(s):  
Sachit Anand ◽  
Nellai Krishnan ◽  
Prabudh Goel ◽  
Anjan Kumar Dhua ◽  
Vishesh Jain ◽  
...  
Keyword(s):  
Systematic Review ◽  
3D Printing ◽  
Solid Tumors ◽  
Surgical Planning ◽  
Three Dimensional ◽  
Current Evidence ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printed ◽  
Dimensional Printing

Background: In cases with solid tumors, preoperative radiological investigations provide valuable information on the anatomy of the tumor and the adjoining structures, thus helping in operative planning. However, due to a two-dimensional view in these investigations, a detailed spatial relationship is difficult to decipher. In contrast, three-dimensional (3D) printing technology provides a precise topographic view to perform safe surgical resections of these tumors. This systematic review aimed to summarize and analyze current evidence on the utility of 3D printing in pediatric extra-cranial solid tumors. Methods: The present study was registered on PROSPERO—international prospective register of systematic reviews (registration number: CRD42020206022). PubMed, Embase, SCOPUS, and Google Scholar databases were explored with appropriate search criteria to select the relevant studies. Data were extracted to study the bibliographic information of each article, the number of patients in each study, age of the patient(s), type of tumor, organ of involvement, application of 3D printing (surgical planning, training, and/or parental education). The details of 3D printing, such as type of imaging used, software details, printing technique, printing material, and cost were also synthesized. Results: Eight studies were finally included in the systematic review. Three-dimensional printing technology was used in thirty children with Wilms tumor (n = 13), neuroblastoma (n = 7), hepatic tumors (n = 8), retroperitoneal tumor (n = 1), and synovial sarcoma (n = 1). Among the included studies, the technology was utilized for preoperative surgical planning (five studies), improved understanding of the surgical anatomy of solid organs (two studies), and improving the parental understanding of the tumor and its management (one study). Computed tomography and magnetic resonance imaging were either performed alone or in combination for radiological evaluation in these children. Different types of printers and printing materials were used in the included studies. The cost of the 3D printed models and time involved (range 10 h to 4–5 days) were reported by two studies each. Conclusions: 3D printed models can be of great assistance to pediatric surgeons in understanding the spatial relationships of tumors with the adjacent anatomic structures. They also facilitate the understanding of families, improving doctor–patient communication.

scholarly journals Tailormade Drug Delivery System: A Novel Trio Concept of 3DP+ Hydrogel+ SLA

2019 ◽  
Vol 9 (4-s) ◽  
pp. 861-866 ◽  
Author(s):  
Lalita Devi ◽  
Punam Gaba ◽  
Hitesh Chopra
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Drug Delivery System ◽  
Delivery System ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
System A ◽  
Hydrogel Formation ◽  
Organic Fluids ◽  
Dimensional Printing

Hydrogels possess three-dimensional polymeric network structure and equipped for retaining extensive measure of water or organic fluids. This quality makes them as exceptional candidate for the simulation of extra cellular matrixes. For this the three dimensional printing (3DP) has evolved as the technique for the formation of the digital models. The 3DP is capable for processing the prescriptions and the therapeutic gadgets. One of the technique known as stereolithographic (SLA) printing has shown promising results in formulating the hydrogel based system for fabrication. The SLA acts by cross connecting the saps to shape the polymer matrices. Due to water captured in the gels it is conceivable to create the pre- wetted, medicate hydrogels and gadgets. The 3DP helps in formation of tailor made drug delivery system as per needs of patients. Many of Bioinks has been tried up for the hydrogel formation such as collagen, gelatin, hyaluronan, silk, alginate, and nanocellulose etc. Keywords: 3D Printing, Hydrogel, Steriolithography

scholarly journals 3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review

Polymers ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 180
Author(s):  
M. N. M. Azlin ◽  
R. A. Ilyas ◽  
M. Y. M. Zuhri ◽  
S. M. Sapuan ◽  
M. M. Harussani ◽  
...  
Keyword(s):  
3D Printing ◽  
Historical Development ◽  
Three Dimensional ◽  
Polymer Materials ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
Sustainable Technologies ◽  
Bright Future ◽  
Dimensional Printing

Sustainable technologies are vital due to the efforts of researchers and investors who have allocated significant amounts of money and time to their development. Nowadays, 3D printing has been accepted by the main industry players, since its first establishment almost 30 years ago. It is obvious that almost every industry is related to technology, which proves that technology has a bright future. Many studies have shown that technologies have changed the methods for developing particular products. Three-dimensional printing has evolved tremendously, and currently, many new types of 3D printing machines have been introduced. In this paper, we describe the historical development of 3D printing technology including its process, types of printing, and applications on polymer materials.

Sign in / Sign up

Export Citation Format

Share Document