scholarly journals Geofencing to Enable Differentiated Road User Charging

Author(s):  
Petter Arnesen ◽  
Hanne Seter ◽  
Ørjan Tveit ◽  
Mats Myhrvold Bjerke

Tolling normally has a dual purpose in Norway. Its first goal is to finance a project or an improvment in the transport services offered in an area, for instance extend public transport services. The second goal is to change travel behavior, encouraging drivers of private cars to use other more environmentally friendly modes. Today, this tolling system is based on fixed points on the road network which are not necessarily able to record all road usage evenly. Within the GeoSUM (Geofencing for Smart Urban Mobility) research project, a distance and fuel differentiated road user charging scheme has been piloted. Instead of fixed point tolling, this system enables the driver to perceive that the cost is directly related to how much gasoline or electricity is used on the road network. The key technology for this system is geofencing, and the pilot results show that the proposed system did indeed increase the amount electricity used for driving inside the geofence zones, reducing in turn the amount of fossil-based fuel used.

2018 ◽  
Vol 2018 (11) ◽  
pp. 31-42
Author(s):  
Antoni Szydło ◽  
Piotr Mackiewicz

The costs of construction and the future maintenance of expressways and motorways have a significant impact on the choice of technologies for their construction. The subject of the article is the analysis of the costs of construction and maintenance of rigid (concrete) and flexible (asphalt mixtures) pavements in Poland. The construction technologies and maintenance scenarios in service were analysed for selected pavement constructions of rigid and flexible motorways and expressways. The costs of construction and maintenance of these pavements in national conditions were determined. The fourth quarter of 2015 was adopted as the initial price level. On the basis of the analysis of the costs of construction and maintenance of the analysed structures, the advantage of rigid constructions made of cement concrete was demonstrated, especially in the aspect of the surface maintenance. The cost assessment was carried out for 30 years of exploitation. The concrete pavements on the road network in Poland have been used for over 20 years. They are present both on low-class roads and on the highest-class roads, i.e. motorways and expressways.


2019 ◽  
Vol 16 (3) ◽  
pp. 264-275 ◽  
Author(s):  
I. M. Ryabovbov ◽  
R. Ya. Kashmanov

Introduction. The authors propose to use a rational distribution of buses, taking into account their passenger capacity and the hours of the day, in order to optimize the operation of the rolling stock (RS) on the route. The usage of RS low-capacity on routes with significant passenger traffic increases the RS need, the load on the transport network and emissions of harmful substances into the atmosphere. Operation of high-capacity buses on routes with low power passenger traffic leads to the large intervals of movement and to the increase of waiting time for passengers. The authors highlight that on the number and type of buses’ determining it is necessary to take into account the city specifics (on the example of Volgograd), such as the presence of only two main streets with three lanes in each direction, adjacent roads through which the routes pass, one lane direction.The length of the city along the Volga river in total is about 90 km, due to the peculiarities of the road network (RN) of the city, any irrational use of the RS leads to a significant load on the road network, and, as a result, to the congestion on the roads. Nowadays the PS is not operated effectively.On most routes of the city the capacity of RS does not correspond to passenger traffic on the route. Possible way to optimize the use of RS is taking into account the daily load on the road network.Materials and methods. The authors studied the technology of the movement organization of the rolling stock on the № 59 route. In order to optimize the transportation process, the authors used the method of determining the buses’ number by hour of the day on the base of the graph-analytical method. Buses of different capacity were used on this route.Results. The resulting distribution of buses made it possible to combine the interests of carriers and passengers, to increase the efficiency of rolling stock and to reduce the load on the road network.Discussion and conclusions. As a result, the authors present the measures for improving the efficiency of the rolling stock. These measures are the main for improving transport services for population.


Author(s):  
Jelena Ćirilović Stanković ◽  
Goran Mladenović ◽  
Cesar Queiroz

About 20% of the Serbian national road network has sections with low volume traffic. These sections are maintained in relatively poor condition since the maintenance budget is typically allocated to the road sections with most traffic. This paper aims to define the appropriate maintenance policy for keeping these sections in “optimal” condition. The traditional approach has been to consider as optimal the condition leading to the minimum sum of road agency costs and road user costs. However, currently there is an emphasis on including environmental cost (greenhouse gas emissions, in particular) into pavement management systems. This extends the concept of optimum by defining it as the maintenance policy leading to the minimum sum of (a) road agency costs, (b) road user costs, and (c) the cost to society of CO2 emissions. Three potential influencing factors are further analyzed: traffic loading, pavement structural number, and the initial condition of the road section. The World Bank’s Road Network Evaluation Tools (RONET) model was used to analyze the Serbian low volume road network and develop the optimal maintenance policy. The results show that the cost of CO2 emissions plays an important role in calculating the optimal policy, but unlike the high volume parts of the road network, in the case of low volume roads, a substantial part of total emissions is related to the production and placement of new pavement layers, rather than from vehicle emissions.


2020 ◽  
pp. 002252662097950
Author(s):  
Fredrik Bertilsson

This article contributes to the research on the expansion of the Swedish post-war road network by illuminating the role of tourism in addition to political and industrial agendas. Specifically, it examines the “conceptual construction” of the Blue Highway, which currently stretches from the Atlantic Coast of Norway, traverses through Sweden and Finland, and enters into Russia. The focus is on Swedish governmental reports and national press between the 1950s and the 1970s. The article identifies three overlapping meanings attached to the Blue Highway: a political agenda of improving the relationships between the Nordic countries, industrial interests, and tourism. Political ambitions of Nordic community building were clearly pronounced at the onset of the project. Industrial actors depended on the road for the building of power plants and dams. The road became gradually more connected with the view of tourism as the motor of regional development.


2021 ◽  
Vol 43 (2) ◽  
pp. 262-278
Author(s):  
Ariane Dupont-Kieffer ◽  
Sylvie Rivot ◽  
Jean-Loup Madre

The golden age of road demand modeling began in the 1950s and flourished in the 1960s in the face of major road construction needs. These macro models, as well as the econometrics and the data to be processed, were provided mainly by engineers. A division of tasks can be observed between the engineers in charge of estimating the flows within the network and the transport economists in charge of managing these flows once they are on the road network. Yet the inability to explain their decision-making processes and individual drives gave some room to economists to introduce economic analysis, so as to better understand individual or collective decisions between transport alternatives. Economists, in particular Daniel McFadden, began to offer methods to improve the measure of utility linked to transport and to inform the engineering approach. This paper explores the challenges to the boundaries between economics and engineering in road demand analysis.


2021 ◽  
Vol 13 (12) ◽  
pp. 2329
Author(s):  
Elżbieta Macioszek ◽  
Agata Kurek

Continuous, automatic measurements of road traffic volume allow the obtaining of information on daily, weekly or seasonal fluctuations in road traffic volume. They are the basis for calculating the annual average daily traffic volume, obtaining information about the relevant traffic volume, or calculating indicators for converting traffic volume from short-term measurements to average daily traffic volume. The covid-19 pandemic has contributed to extensive social and economic anomalies worldwide. In addition to the health consequences, the impact on travel behavior on the transport network was also sudden, extensive, and unpredictable. Changes in the transport behavior resulted in different values of traffic volume on the road and street network than before. The article presents road traffic volume analysis in the city before and during the restrictions related to covid-19. Selected traffic characteristics were compared for 2019 and 2020. This analysis made it possible to characterize the daily, weekly and annual variability of traffic volume in 2019 and 2020. Moreover, the article attempts to estimate daily traffic patterns at particular stages of the pandemic. These types of patterns were also constructed for the weeks in 2019 corresponding to these stages of the pandemic. Daily traffic volume distributions in 2020 were compared with the corresponding ones in 2019. The obtained results may be useful in terms of planning operational and strategic activities in the field of traffic management in the city and management in subsequent stages of a pandemic or subsequent pandemics.


2000 ◽  
Vol 1712 (1) ◽  
pp. 196-201 ◽  
Author(s):  
Jin-Fang Shr ◽  
Benjamin P. Thompson ◽  
Jeffrey S. Russell ◽  
Bin Ran ◽  
H. Ping Tserng

An increasing number of state highway agencies (SHAs) are using A (cost) + B (time cost) bidding ( A + B bidding) for highway construction. The A + B bidding concept is designed to shorten the total contract time by allowing each contractor to bid the number of days in which the work can be accomplished, in addition to the traditional cost bid. The SHA is then presented with the problem of determining a reasonable range of contract time submitted by the bidders. Most SHAs do not currently restrict the range of B. However, several problems may arise from an unrestricted range of B. First, if no minimum is set for B, a bidder may inflate the cost bid and submit an unreasonably low B, using the excess cost bid to cover the disincentives charged for exceeding the time bid. Second, if no maximum is set for B, then a bidder with a high B and a low-cost bid may be awarded the job and make an unreasonable amount of money from incentive payments. This study develops a quantified model of the price-time bidding contract. A construction cost-versus-time curve is developed from Florida Department of Transportation (DOT) data. The contractor’s price-versus-time curve is then combined with the road-user cost to determine the optimum lower limit to be set on B. Finally, several projects completed by the Florida DOT will be used to illustrate this model.


Author(s):  
R. S. Durov ◽  
◽  
E. V. Varnakova ◽  
K. O. Kobzev ◽  
◽  
...  

Introduction. One of the most pressing socio-economic problems is the state of the environment, which affects the living conditions of many people. The article deals with the problem areas of the intersection of 20-ya Liniya street – Sholokhov Avenue in Rostov-on-Don. Problem Statement. The purpose of this paper is to improve environmental safety at the intersection of 20-ya Liniya street – Sholokhov Avenue in Rostov-on-Don by reducing emissions from road transport through the proposed measures to reorganize traffic on this section of the road network. Theoretical Part. The article provides an assessment of environmental and road safety on the road network section before applying the proposed measures. The measures are listed and justified that would help improve the conditions for road transport at the selected intersection and reduce emissions from road transport, which would improve environmental safety. The calculation of environmental indicators was made after the proposed measures to reduce NOx emissions by cars. Conclusion. The article analyzes the environmental indicators before and after the events, and then compares them. Based on the analysis and calculations, it is determined how much the proposed measures to optimize traffic will help reduce NOx emissions by cars.


2019 ◽  
Vol 8 (6) ◽  
Author(s):  
Polina A. Buyvol ◽  
Gulnara A. Yakupova ◽  
Irina V. Makarova

The transport system plays an important role in human activities and is an integral part of the successful functioning of the urbanized area. The increasing degree of provision of urban residents with transport services should at the same time keep the environment environmentally friendly and sustainable over time. The article is devoted to the issues of ensuring the rational functioning of the city transport system based on the development and implementation of an intelligent road infrastructure management system, the intellectual core of which are simulation models of problem areas of the road network. The objective of the study is the development of tools for organizing traffic in the conditions of the rapid growth of the fleet of vehicles. Research tasks were to analyze the research in the field of traffic management, to consider methods to reduce and prevent traffic jams on roads in general and in individual sections in particular. The following research methods were used: methods of system analysis, methods of modeling traffic flows, simulation, computer experiment. Achievements: the developed simulation model can be used to conduct a computer experiment in order to select the optimal parameters for the functioning of traffic lights on a specific section of the road network of the city of Naberezhnye Chelny


Sign in / Sign up

Export Citation Format

Share Document