Piezoelectric energy reclamation based on frequency up-conversion technique for digital actuator autonomous additional functions

2017 ◽  
Vol 28 (12) ◽  
pp. 1682-1696 ◽  
Author(s):  
Linjuan Yan ◽  
Adrien Badel ◽  
Fabien Formosa ◽  
Laurent Petit
Keyword(s):  
Permanent Magnet ◽  
Cantilever Beam ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Magnetic Interaction ◽  
Interaction Force ◽  
Vibration Energy ◽  
Optimized Design ◽  
Vibration Energy Harvester ◽  
Piezoelectric Energy

A piezoelectric vibration energy harvester aiming at collecting energy from the operation of an electromagnetic digital actuator is presented. It is based on the frequency up-conversion and can simultaneously obtain the information of discrete position location. The objective is an improved reliability of such digital actuators ensuring sample controls of the actuator positions. The considered electromagnetic digital actuator is capable of achieving two-dimensional in-plane movements by switching a mobile permanent magnet among four discrete positions. The demonstration of a first step toward integrated additional autonomous functions scavenging a part of the mechanical energy of the mobile permanent magnet is achieved. The vibration energy harvester consists of a piezoelectric cantilever beam magnetically attached to the mobile permanent magnet. The limited magnetic interaction force allows a frequency up-conversion strategy to be set. The frequency up-conversion technique that is used here consists of a “low frequency” excitation that drives a much higher natural frequency oscillator. Indeed, once the energy harvester separates from the mobile permanent magnet, a free oscillation occurs and the induced mechanical energy is harvested. This design concept is numerically analyzed and experimentally validated. Harvested energy of 4.7 µJ is obtained from preliminary experiments using a simple out-of-plane cantilever beam with 9 N/m stiffness and 16 mN magnetic attraction between the vibration energy harvester and the mobile permanent magnet when they contact each other. This energy is in accordance with the requirements for wireless communication of simple information. Finally, an L-shaped cantilever beam optimized design is proposed for future in-plane integration.

scholarly journals Theoretical and Experimental Studies on MEMS Variable Cross-Section Cantilever Beam Based Piezoelectric Vibration Energy Harvester

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 772
Author(s):  
Xianming He ◽  
Dongxiao Li ◽  
Hong Zhou ◽  
Xindan Hui ◽  
Xiaojing Mu
Keyword(s):  
Power Density ◽  
Cantilever Beam ◽  
Cross Section ◽  
Energy Harvester ◽  
Variable Cross Section ◽  
Vibration Energy ◽  
Variable Cross ◽  
Vibration Energy Harvester ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration

The piezoelectric vibration energy harvester (PVEH) based on the variable cross-section cantilever beam (VCSCB) structure has the advantages of uniform axial strain distribution and high output power density, so it has become a research hotspot of the PVEH. However, its electromechanical model needs to be further studied. In this paper, the bidirectional coupled distributed parameter electromechanical model of the MEMS VCSCB based PVEH is constructed, analytically solved, and verified, which laid an important theoretical foundation for structural design and optimization, performance improvement, and output prediction of the PVEH. Based on the constructed model, the output performances of five kinds of VCSCB based PVEHs with different cross-sectional shapes were compared and analyzed. The results show that the PVEH with the concave quadratic beam shape has the best output due to the uniform surface stress distribution. Additionally, the influence of the main structural parameters of the MEMS trapezoidal cantilever beam (TCB) based PVEH on the output performance of the device is theoretically analyzed. Finally, a prototype of the Aluminum Nitride (AlN) TCB based PVEH is designed and developed. The peak open-circuit voltage and normalized power density of the device can reach 5.64 V and 742 μW/cm3/g2, which is in good agreement with the theoretical model value. The prototype has wide application prospects in the power supply of the wireless sensor network node such as the structural health monitoring system and the Internet of Things.

Closed-form solutions of bending-torsion coupled forced vibrations of a piezoelectric energy harvester under a fluid vortex

2021 ◽  
pp. 1-31
Author(s):  
Xiang Zhao ◽  
Weidong Zhu ◽  
Ying-hui Li
Keyword(s):  
Closed Form ◽  
Torsional Vibration ◽  
Energy Harvester ◽  
High Energy ◽  
Forced Vibrations ◽  
Vibration Energy ◽  
Beam Model ◽  
Vibration Energy Harvester ◽  
Closed Form Solutions ◽  
Piezoelectric Energy

Abstract Vibration energy harvesting problems have strongly developed in recent years. However, many researchers just consider bending vibration models of energy harvesters. As a matter of fact, torsional vibration is also important and cannot be ignored in many cases. In this work, closed-form solutions of bending-torsion coupled forced vibrations of a piezoelectric energy harvester subjected to a fluid vortex are derived. Timoshenko beam model is used for modeling the energy harvester, and the extended Hamilton's principle is used in the modeling process. Since piezoelectric effects in both bending and torsional directions are considered, two kinds of electric coupling effects appear in forced vibration equations, and a new model for the electric circuit equation is developed. Lamb-Oseen vortex model is considered in this study. Both the external aerodynamic force and moment are simple harmonic loads. Three damping coefficients are considered in the present model. Based on Green's function method, closed-form solutions of the piezoelectric energy harvester subjected to the water vortex are derived. Some published results are used to verify the present solutions. It can be concluded through analysis that when torsional vibration is considered, the bandwidth of the high energy area of the voltage becomes large, and the bending-torsion coupled vibration energy harvester can produce more power than a transverse vibration energy harvester.

scholarly journals Theoretical and Experimental Study of Nonlinear and Electro-Magneto-Mechanical-Based Piezoelectric Vibration Energy Harvester

2019 ◽  
Vol 2019 ◽  
pp. 1-17
Author(s):  
Shilong Sun ◽  
Xiao Zhang
Keyword(s):  
Experimental Study ◽  
Energy Harvester ◽  
Time History ◽  
Vibration Energy ◽  
Voltage Response ◽  
Vibration Energy Harvester ◽  
Piezoelectric Energy ◽  
Voltage Output ◽  
Cantilevered Beam ◽  
Substrate Plate

This paper presents a folded nonlinear electro-magneto-mechanical (EMM) vibration-based piezoelectric energy harvester system, which is built on the cantilevered beam structure and consists of one host beam and two substrate plates. The performance of the linearity and nonlinearity to the proposed EMM system is evaluated and compared. Moreover, the voltage response in time history and the phase portrait are studied under an external rectifier circuit with a resistor. The results show that the nonlinearity of the reported EMM system changes the coherent resonance vibration mode from single to double under a harmonic base excitation within the frequency range of 20 Hz–50 Hz. Meanwhile, the substrate plate D contributes more averaged voltage output at a lower frequency while the substrate plate A contributes the voltage output at the relatively higher frequency for the nonlinear EMM system. The experimental study indicates that the proposed nonlinear EMM vibration-based piezoelectric energy harvester can yield a total voltage of 8.133 [email protected] Hz while the baseline structure only produces 1.724 [email protected] Hz. In addition, the bandwidth range of high-power output is enlarged by the nonlinear EMM system, which makes this device more flexible and applicable to absorb the wasted vibration energy generated by industrial machines and public facilities.

On Mathematical Modeling of Piezoelectric Energy Harvesters

2014 ◽  
Vol 953-954 ◽  
pp. 655-658 ◽  
Author(s):  
Guang Qing Shang ◽  
Hong Bing Wang ◽  
Chun Hua Sun
Keyword(s):  
Mathematical Modeling ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Piezoelectric Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Energy Harvesting System ◽  
Piezoelectric Vibration

Energy harvesting system has become one of important areas of ​​research and develops rapidly. How to improve the performance of the piezoelectric vibration energy harvester is a key issue in engineering applications. There are many literature on piezoelectric energy harvesting. The paper places focus on summarizing these literature of mathematical modeling of piezoelectric energy harvesting, ranging from the linear to nonlinear, from early a single mechanical degree to piezoaeroelastic problems.

Heartbeat Energy Harvesting Using the Fan-Folded Piezoelectric Beam Geometry

2015 ◽  
Author(s):  
M. H. Ansari ◽  
M. Amin Karami
Keyword(s):  
Natural Frequency ◽  
Energy Harvester ◽  
Low Frequency ◽  
Mode Shapes ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Mechanical Coupling ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam

A three dimensional piezoelectric vibration energy harvester is designed to generate electricity from heartbeat vibrations. The device consists of several bimorph piezoelectric beams stacked on top of each other. These horizontal bimorph beams are connected to each other by rigid vertical beams making a fan-folded geometry. One end of the design is clamped and the other end is free. One major problem in micro-scale piezoelectric energy harvesters is their high natural frequency. The same challenge is faced in development of a compact vibration energy harvester for the low frequency heartbeat vibrations. One way to decrease the natural frequency is to increase the length of the bimorph beam. This approach is not usually practical due to size limitations. By utilizing the fan-folded geometry, the natural frequency is decreased while the size constraints are observed. The required size limit of the energy harvester is 1 cm by 1 cm by 1 cm. In this paper, the natural frequencies and mode shapes of fan-folded energy harvesters are analytically derived. The electro-mechanical coupling has been included in the model for the piezoelectric beam. The design criteria for the device are discussed.

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilevered in Piezoelectric Vibration Energy Harvester

2019 ◽  
Author(s):  
Shan Gao ◽  
Hongrui Ao ◽  
Hongyuan Jiang
Keyword(s):  
Energy Harvesting ◽  
Integrated Circuits ◽  
Resonant Frequency ◽  
High Power ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Piezoelectric Energy ◽  
Piezoelectric Vibration

Abstract Piezoelectric vibration energy harvesting technology has attracted significant attention for its applications in integrated circuits, microelectronic devices and wireless sensors due to high power density, easy integration, simple configuration and other outstanding features. Among piezoelectric vibration energy harvesting structures, cantilevered beam is one of the simplest and most commonly used structures. In this work, a vertically staggered rectangle-through-holes (VS-RTH) cantilevered model of mesoscale piezoelectric energy harvester is proposed, which focuses on the multi-directional vibration collection and low resonant frequency. To verify the output performances of the device, this paper employs basic materials and fabrication methods with mathematical modeling. The simulations are conducted through finite element methods to discuss the properties of VS-RTH energy harvester on resonant frequency and output characteristics. Besides, an energy storage circuit with high power collection rate is adopted as collection system. This harvester is beneficial to the further application of devices working with continuous vibrations and low power requirements.

A Patternless Piezoelectric Energy Harvester for Ultra Low Frequency Applications

2020 ◽  
Vol 12 (7) ◽  
Author(s):  
M. R. Awal ◽  
◽  
M. Jusoh ◽  
T. Sabapathy ◽  
R. B. Ahmad ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Vibration Energy ◽  
Induced Voltage ◽  
Vibration Energy Harvester ◽  
Ultra Low Power ◽  
Energy Applications ◽  
Piezoelectric Energy ◽  
Deposition Thickness ◽  
Piezoelectric Harvester

This paper presents a pattern less piezoelectric harvester for ultra low power energy applications. Usually patterned cantilevers are used as vibration energy harvester which results additional fabrication process. Hence, to reduce the process, a four layer cantilever configuration is used to design the harvester with Aluminum, Silicon and Zinc Oxide. The device dimension is settled to 12×10×≈0.5009 mm3 with ≈300 nm deposition thickness for each layer. The modeling and fabrication processes are demonstrated in detail. The induced voltage by the cantilever is obtained through the analytical and practical measurements. From the measurements, it is found that, the maximum induced voltage is 91.2 mV from practical measurement with voltage density of 1.517 mV/mm3. It is evident from the results that, this pattern less model can be useful for next generation vibration energy harvester with simpler technology.

Numerical research on a vortex shedding induced piezoelectric-electromagnetic energy harvester

2021 ◽  
pp. 1045389X2110116
Author(s):  
Xia Li ◽  
Zhiyuan Li ◽  
Benxue Liu ◽  
Jun Zhang ◽  
Weidong Zhu
Keyword(s):  
Wind Speed ◽  
Output Power ◽  
Vortex Shedding ◽  
Energy Harvester ◽  
Hybrid Structure ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Piezoelectric Energy ◽  
Speed Range ◽  
Electromechanical Coupled

To widen the operation wind speed bandwidth of a classic vortex shedding induced vibration piezoelectric energy harvester, a piezoelectric-electromagnetic hybrid energy harvester based on vortex shedding induced vibration is designed. The hybrid vortex shedding induced vibration energy harvester (HVSIVEH) includes a vortex shedding induced vibration piezoelectric energy harvester (VSIVPEH) and an electromagnetic vibration energy harvester (EVEH). The electromechanical coupled vibration model of the hybrid structure was established. By comparing the variations of the output power as a function of the wind speed of the HVSIVEH and the classic VSIVPEH, it is found that the power response curve of the HVSIVEH has two peaks. The hybrid structure can broaden the working wind speed range. The lower the requirement on the output power level, the more obvious the effect of widening the wind speed range. By the solution and analysis of the electromechanical coupled model, better values of related parameters of the HVSIVEH are obtained. The first and second peaks of the output power of the HVSIVEH show better values of 1.9 and 2.2 mW, respectively, under these parameters.

Sign in / Sign up

Export Citation Format

Share Document