Influence of indoor temperature and daylight illuminance on visual perception

2019 ◽  
Vol 52 (3) ◽  
pp. 350-370 ◽  
Author(s):  
G Chinazzo ◽  
J Wienold ◽  
M Andersen
Keyword(s):  
Visual Perception ◽  
Thermal Conditions ◽  
The Other ◽  
Effect Of Temperature ◽  
Design Experiment ◽  
Visual Comfort ◽  
Mixed Design ◽  
Indoor Temperature ◽  
Test Room ◽  
Electric Light

This paper details the results of an experimental study investigating the combined effect of indoor temperature (19 ℃, 23 ℃ and 27 ℃) and horizontal illuminances (∼140 lx, ∼610 lx and ∼1440 lx) on visual perception, with daylight as the only source of light. The goal is to evaluate the cross-modal effect of temperature and the unimodal effect of daylight illuminances on the visual perception of daylight. A 3 × 3 mixed-design experiment was conducted in an office-like test room with 84 participants. Results show that cross-modal effects of indoor temperature on visual perception occurred: Temperature influenced the perceived warmth of daylight, and temperature interacted with daylight illuminance as the high illuminance was considered more pleasant, was better evaluated and was more often chosen than the low one only in a thermally comfortable condition. In terms of unimodal effects, differences in visual comfort evaluations were substantial only between the low and the other two illuminances, suggesting that visual comfort did not increase with illuminance above an already comfortable threshold. Moreover, perceived brightness under the high daylight illuminance was lower than that reported in past studies under a comparable electric light illuminance, leading to the hypothesis that high illuminances might be more tolerated in a naturally-lit environment compared to a space illuminated with electric light. Findings advance the understanding of occupant perceptions of daylit environments and suggest that, together with visual factors, thermal conditions should be considered in visual perception investigations.

scholarly journals "Do the Right Thing" for Whom? An Experiment on Ingroup Favouritism, Group Assorting and Moral Suasion

2019 ◽  
Author(s):  
Ennio Bilancinio ◽  
Leonardo Boncinelli ◽  
Valerio Capraro ◽  
Tatiana Celadin ◽  
Roberto Di Paolo
Keyword(s):  
Individual Characteristics ◽  
Political Orientation ◽  
The Other ◽  
Design Experiment ◽  
Mixed Design ◽  
Second Stage ◽  
Moral Suasion ◽  
The Right ◽  
Do The Right Thing ◽  
Ingroup Favouritism

In this paper we investigate the effect of moral suasion on ingroup favouritism. We report a well-powered, pre-registered, two-stage 2x2 mixed-design experiment. In the first stage, groups are formed on the basis of how participants answer to a set of questions, concerning non-morally relevant issues in one treatment (assortativity on non-moral preferences), and morally relevant issues in another treatment (assortativity on moral preferences). In the second stage, participants choose how to split a given amount of money between participants of their own group and participants of the other group, first in the baseline setting and then in a setting where they are told to do what they believe to be morally right (moral suasion). Our main results are: (i) in the baseline, participants tend to favour their own group to a greater extent when groups are assorted according to moral preferences, compared to when they are assorted according to non-moral preferences; (ii) the net effect of moral suasion is to decrease ingroup favouritism, but there is also a non-negligible proportion of participants for whom moral suasion increases ingroup favouritism; (iii) the effect of moral suasion is substantially stable across group assortativity and four pre-registered individual characteristics (gender, political orientation, religiosity, pro-life vs pro-choice ethical convictions).

scholarly journals Electrochromic Glass system in Norwegian Climate: Control strategies and Impact on the indoor thermal conditions

2021 ◽  
Vol 2069 (1) ◽  
pp. 012127
Author(s):  
A Nocente ◽  
S Grynning ◽  
L Gullbrekken
Keyword(s):  
Control Systems ◽  
Control Algorithm ◽  
Control Strategies ◽  
Thermal Conditions ◽  
Visual Comfort ◽  
Climate Control ◽  
Indoor Temperature ◽  
Automatic Control Systems ◽  
Window Area ◽  
The Impact

Abstract This work investigates by simulations the impact of the use of Electrochromic (EC) windows in a modern wooden cabin with large window area in a colder climate. The climatic areas considered are 4 different locations in Norway. Three different automatic control systems were used and compared. The windows were alternatively equipped with a textile integrated external blind and an EC glass. The results show that the use of EC glass has a quantifiable impact in term of reduction of peak temperature by 2°C and reduction of number of hours with high indoor temperature. The control system that seems to perform better is based on external solar radiation. In the particular situation of a cabin, where the visual comfort and the surrounding view has the greatest importance, a more complex control algorithm needs to be developed.

scholarly journals The Respiration of some Planktonic copepods II. The Effect Of Temperature

1953 ◽  
Vol 31 (3) ◽  
pp. 447-460 ◽  
Author(s):  
D. T. Gauld ◽  
J. E. G. Raymont
Keyword(s):  
Respiratory Rate ◽  
The Body ◽  
The Other ◽  
Effect Of Temperature ◽  
Acartia Clausi ◽  
Temora Longicornis ◽  
Different Temperatures ◽  
Planktonic Copepods ◽  
The Difference ◽  
The Relationship

The respiratory rates of three species of planktonic copepods, Acartia clausi, Centropages hamatus and Temora longicornis, were measured at four different temperatures.The relationship between respiratory rate and temperature was found to be similar to that previously found for Calanus, although the slope of the curves differed in the different species.The observations on Centropages at 13 and 170 C. can be divided into two groups and it is suggested that the differences are due to the use of copepods from two different generations.The relationship between the respiratory rates and lengths of Acartia and Centropages agreed very well with that previously found for other species. That for Temora was rather different: the difference is probably due to the distinct difference in the shape of the body of Temora from those of the other species.The application of these measurements to estimates of the food requirements of the copepods is discussed.

scholarly journals Drivers’ Age and Automated Vehicle Explanations

2021 ◽  
Vol 13 (4) ◽  
pp. 1948
Author(s):  
Qiaoning Zhang ◽  
Xi Jessie Yang ◽  
Lionel P. Robert
Keyword(s):  
Decision Making ◽  
Middle Age ◽  
Age Groups ◽  
Design Experiment ◽  
Mixed Design ◽  
Automated Vehicles ◽  
Automated Vehicle ◽  
Automated Decision Making

Automated vehicles (AV) have the potential to benefit our society. Providing explanations is one approach to facilitating AV trust by decreasing uncertainty about automated decision-making. However, it is not clear whether explanations are equally beneficial for drivers across age groups in terms of trust and anxiety. To examine this, we conducted a mixed-design experiment with 40 participants divided into three age groups (i.e., younger, middle-age, and older). Participants were presented with: (1) no explanation, or (2) explanation given before or (3) after the AV took action, or (4) explanation along with a request for permission to take action. Results highlight both commonalities and differences between age groups. These results have important implications in designing AV explanations and promoting trust.

Psychophysically Based Physical Capability Limits For Right Angle Power Tool Operation

2020 ◽  
Vol 64 (1) ◽  
pp. 910-914
Author(s):  
Jonathan Valencia ◽  
Joel Cort
Keyword(s):  
Analysis Of Variance ◽  
The Other ◽  
Mixed Design ◽  
Joint Orientation ◽  
Physical Capability ◽  
Subject Variables ◽  
Group A ◽  
Repeated Analysis ◽  
Post Hoc

A psychophysical methodology was utilized to examine 40 non-skilled female participants performing right-angle power tool (RAPT) fastening tasks. A combination of two between subject variables were examined for a total of four between-subject groups: joint orientation (horizontal and vertical planes) and joint hardness (hard and soft joints). Participants were evenly distributed into one of four joint orientation- hardness groups. Within each group, a combination of three fastening strategies and three fastening frequencies were performed by each participant. The chosen target torque determined the physical capability limits (PCL). A mixed-design repeated analysis of variance with Tukey’ significance post hoc test were used to determine any significance with the measured variables ( p<0.05). Fastening strategy and frequency influenced the chosen torque magnitude. Participants chose significantly higher target torques with the Turbo Tight strategy in comparison to the other two strategies. Furthermore, participants chose to accept lower target torques and forces as fastening frequency increased.

scholarly journals Effect of Temperature on the Corrosion Inhibition of Trans-4-Hydroxy-4′-Stilbazole on Mild Steel in HCl Solution

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Ayssar Nahlé ◽  
Ideisan I. Abu-Abdoun ◽  
Ibrahim Abdel-Rahman
Keyword(s):  
Weight Loss ◽  
Double Bond ◽  
Adsorption Isotherm ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Thermodynamic Parameters ◽  
The Other ◽  
Effect Of Temperature ◽  
Temkin Adsorption Isotherm ◽  
Hcl Solution

The inhibition and the effect of temperature and concentration of trans-4-hydroxy-4′-stilbazole on the corrosion of mild steel in 1 M HCl solution was investigated by weight loss experiments at temperatures ranging from 303 to 343 K. The studied inhibitor concentrations were between  M and  M. The percentage inhibition increased with the increase of the concentration of the inhibitor. The percentage inhibition reached about 94% at the concentration of  M and 303 K. On the other hand, the percentage inhibition decreased with the increase of temperature. Using the Temkin adsorption isotherm, the thermodynamic parameters for the adsorption of this inhibitor on the metal surface were calculated. Trans-4-hydroxy-4′-stilbazole was found to be a potential corrosion inhibitor since it contained not only nitrogen and oxygen, but also phenyl and pyridine rings that are joined together with a double bond (–C=C–) in conjugation with these rings.

scholarly journals Sex Differentiation in Amphibians: Effect of Temperature and Its Influence on Sex Reversal

2021 ◽  
pp. 1-11
Author(s):  
Adrián Ruiz-García ◽  
Álvaro S. Roco ◽  
Mónica Bullejos
Keyword(s):  
Sexual Differentiation ◽  
Sex Differentiation ◽  
Environmental Contaminants ◽  
Natural Populations ◽  
Sex Reversal ◽  
The Other ◽  
Effect Of Temperature ◽  
Amphibian Species ◽  
Expected Increase

The role of environmental factors in sexual differentiation in amphibians is not new. The effect of hormones or hormone-like compounds is widely demonstrated. However, the effect of temperature has traditionally been regarded as something anecdotal that occurs in extreme situations and not as a factor to be considered. The data currently available reveal a different situation. Sexual differentiation in some amphibian species can be altered even by small changes in temperature. On the other hand, although not proven, it is possible that temperature is related to the appearance of sex-reversed individuals in natural populations under conditions unrelated to environmental contaminants. According to this, temperature, through sex reversal (phenotypic sex opposed to genetic sex), could play an important role in the turnover of sex-determining genes and in the maintenance of homomorphic sex chromosomes in this group. Accordingly, and given the expected increase in global temperatures, growth and sexual differentiation in amphibians could easily be affected, altering the sex ratio in natural populations and posing major conservation challenges for a group in worldwide decline. It is therefore particularly urgent to understand the mechanism by which temperature affects sexual differentiation in amphibians.

scholarly journals Monitoring and Search of Coma Patients using Variable Motion Sensor System

2019 ◽  
Vol 8 (9S2) ◽  
pp. 307-310
Keyword(s):  
Visual Perception ◽  
Pulse Rate ◽  
The Other ◽  
Sensor System ◽  
Motion Sensor ◽  
Basic Part ◽  
Movement Recognition

It is vital to consistently screen the oblivious/extreme lethargies patients to comprehend their wellbeing condition. The primary objectives of the proposed is to achieve two things. 1) Monitoring and cautioning the restorative individual is the basic part, when the incapacitated additions cognizance utilizing movement recognition framework. 2) Continuous observing and assessment of basic signs of the patient, for example, Pulse rate and warmth and alarm the specialist at whatever point consideration is required. Wearable Motion sensor framework can be utilized to screen different body developments such and hand development as visual perception flicker development to find the cognizant condition of an individual. This framework will all around likely be exceptionally useful in helping the specialist about the wellbeing state of the other than cognizant patient and cautioning the doctor at whatever point care is required. The proposed framework will help your specialist by providing an alert about the wellbeing state of the patient, when the spot of basic signs reported.

A Head-to-Head Comparison of Hydrogen Peroxide Vapor and Aerosol Room Decontamination Systems

2011 ◽  
Vol 32 (9) ◽  
pp. 831-836 ◽  
Author(s):  
T. Holmdahl ◽  
P. Lanbeck ◽  
M. Wullt ◽  
M. H. Walder
Keyword(s):  
Hydrogen Peroxide ◽  
Cycle Time ◽  
New Technologies ◽  
Biological Indicators ◽  
The Other ◽  
Test Room ◽  
Cycle Times ◽  
Hydrogen Peroxide Vapor ◽  
In Vitro Comparison

Objective.New technologies have emerged in recent years for the disinfection of hospital rooms and equipment that may not be disinfected adequately using conventional methods. There are several hydrogen peroxide–based area decontamination technologies on the market, but no head-to-head studies have been performed.Design.We conducted a head-to-head in vitro comparison of a hydrogen peroxide vapor (HPV) system (Bioquell) and an aerosolized hydrogen peroxide (aHP) system (Sterinis).Setting.The tests were conducted in a purpose-built 136-m3test room.Methods.One HPV generator and 2 aHP machines were used, following recommendations of the manufacturers. Three repeated tests were performed for each system. The microbiological efficacy of the 2 systems was tested using 6-log Tyvek-pouchedGeobacillus stearo-thermophilusbiological indicators (BIs). The indicators were placed at 20 locations in the first test and 14 locations in the subsequent 2 tests for each system.Results.All BIs were inactivated for the 3 HPV tests, compared with only 10% in the first aHP test and 79% in the other 2 aHP tests. The peak hydrogen peroxide concentration was 338 ppm for HPV and 160 ppm for aHP. The total cycle time (including aeration) was 3 and 3.5 hours for the 3 HPV tests and the 3 aHP tests, respectively. Monitoring around the perimeter of the enclosure with a handheld sensor during tests of both systems did not identify leakage.Conclusion.One HPV generator was more effective than 2 aHP machines for the inactivation ofG. stearothermophilusBIs, and cycle times were faster for the HPV system.

Visual Perspective in Causal Attribution, Empathy and Attitude Change

2003 ◽  
Vol 93 (3_suppl) ◽  
pp. 1035-1046 ◽  
Author(s):  
Özdem M. Önder ◽  
Bengi Öner-özkan
Keyword(s):  
Visual Perception ◽  
Death Penalty ◽  
Attitude Change ◽  
Causal Attribution ◽  
Point Of View ◽  
The Other ◽  
Visual Perspective ◽  
Observer Bias

The aim of the present study was to test the effect of visual perspective on the actor–observer bias. For this aim, we examined the effects of different visual perspectives on individuals' external and internal attributions. In addition to this, we examined the presence or absence of an attitude change toward the death penalty due to participants' visual perspective. One week before the experiment, we measured the participants' attitudes toward the death penalty. Then, during the experiment, films produced by one of the authors of this study were shown to two separate groups of participants. There were two films, each film constituting one of the two levels of visual perception. The content of each film was the memories of a person who was given the death penalty for the murder of his own brother. Level of visual perception was manipulated by using different camera perspectives, one from the actor's point of view and the other from the observer's point of view. At the end of the experiment, participants' attitudes toward the death penalty were measured again.

Sign in / Sign up

Export Citation Format

Share Document