A pore-size scale model for the dielectric properties of water-saturated clean rocks and soils

Geophysics ◽  
2006 ◽  
Vol 71 (6) ◽  
pp. F185-F193 ◽  
Author(s):  
Anthony L. Endres ◽  
Edward A. Bertrand
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
Pore Space ◽  
Relative Size ◽  
Scale Model ◽  
Size Scale ◽  
Saturated Rock ◽  
Water Saturated ◽  
Free Media ◽  
The Relationship

The dielectric properties of water-saturated rock and soils are strongly dependent on the amount and nature of their porosity; interpretation of these geophysical data requires petrophysical models that incorporate both of these elements. The differential effective medium approximation (DEMA) is used to develop a dielectric permittivity model for clean (i.e., clay free) media that divides the pore spaces into elements corresponding to three categories of relative size scale: microscopic porosity (e.g., intergranular cracks), mesoscopic porosity (e.g., main pore volumes), and macroscopic porosity (e.g., vugs and fractures). The hierarchical size-scale structure imposed by the DEMA iterative embedding process is used to assign each pore space category its role in model construction. Use of this model demonstrates that the relationship between dielectric permittivity and porosity is significantly affected by the size scales of pores present in the rock models. A region of realizable permittivity-porosity values is obtained by varying the pore structure in the scaled-porosity model. The bounds of this region correspond to end-member porosity models. Analysis of experimental permittivity data for water-saturated sandstones and carbonates that cover a substantial range of porosity values found that the scaled-porosity models account for a significant part of the variability in experimental data.

scholarly journals Experimental Characterization of Dielectric Properties in Fluid Saturated Artificial Shales

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Roman Beloborodov ◽  
Marina Pervukhina ◽  
Tongcheng Han ◽  
Matthew Josh
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
Dielectric Response ◽  
Pore Space ◽  
Mineralogical Composition ◽  
Data Interpretation ◽  
Dielectric Anisotropy ◽  
Geomechanical Properties ◽  
High Dielectric ◽  
Rock Microstructure

High dielectric contrast between water and hydrocarbons provides a useful method for distinguishing between producible layers of reservoir rocks and surrounding media. Dielectric response at high frequencies is related to the moisture content of rocks. Correlations between the dielectric permittivity and specific surface area can be used for the estimation of elastic and geomechanical properties of rocks. Knowledge of dielectric loss-factor and relaxation frequency in shales is critical for the design of techniques for effective hydrocarbon extraction and production from unconventional reservoirs. Although applicability of dielectric measurements is intriguing, the data interpretation is very challenging due to many factors influencing the dielectric response. For instance, dielectric permittivity is determined by mineralogical composition of solid fraction, volumetric content and composition of saturating fluid, rock microstructure and geometrical features of its solid components and pore space, temperature, and pressure. In this experimental study, we investigate the frequency dependent dielectric properties of artificial shale rocks prepared from silt-clay mixtures via mechanical compaction. Samples are prepared with various clay contents and pore fluids of different salinity and cation compositions. Measurements of dielectric properties are conducted in two orientations to investigate the dielectric anisotropy as the samples acquire strongly oriented microstructures during the compaction process.

scholarly journals A Novel Technology for Measurements of Dielectric Properties of Extremely Small Volumes of Liquids

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Wei-Na Liu
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
Radio Frequency ◽  
Transmission Coefficient ◽  
Biological Samples ◽  
Spectroscopic Analysis ◽  
High Sensitivity ◽  
Quantitative Measurements ◽  
Novel Technology ◽  
The Relationship

A high sensitivity sensor for measurement radio frequency (RF) dielectric permittivity of liquids is described. Interference is used and parasitic effects are cancellation, which makes the sensor can catch weak signals caused by liquids with extremely small volumes. In addition, we present the relationship between transmission coefficient and permittivity of liquids under test (LUT). Using this sensor, quantitative measurements of the dielectric properties at 5.8 GHz are demonstrated of LUTs. Experiments show that the proposed method only requires the volume of 160 nanoliters for liquids. Therefore, the technology can be used for RF spectroscopic analysis of biological samples and extremely precious liquids.

scholarly journals Experimental studies on the transformation from firn to ice in the wet-snow zone of temperate glaciers

1997 ◽  
Vol 24 ◽  
pp. 181-185 ◽  
Author(s):  
Katsuhisa Kawashima ◽  
Tomomi Yamada
Keyword(s):  
Experimental Studies ◽  
Ice Formation ◽  
Compression Tests ◽  
Densification Rate ◽  
Overburden Pressure ◽  
Proportionality Constant ◽  
Wet Snow ◽  
Water Saturated ◽  
The Relationship ◽  
Good Agreement

The densification of water-saturated firn, which had formed just above the firn-ice transition in the wet-snow zone of temperate glaciers, was investigated by compression tests under pressures ranging from 0.036 to 0.173 MPa, with special reference to the relationship between densification rate, time and pressure. At each test, the logarithm of the densification rate was proportional to the logarithm of the time, and its proportionality constant increased exponentially with increasing pressure. The time necessary for ice formation in the firn aquifer was calculated using the empirical formula obtained from the tests. Consequently, the necessary time decreased exponentially as the pressure increased, which shows that the transformation from firn in ice can be completed within the period when the firn aquifer exists, if the overburden pressure acting on the water-saturated firn is above 0.12–0.14 MPa. This critical value of pressure was in good agreement with the overburden pressure obtained from depth–density curves of temperate glaciers. It was concluded that the depth of firn–ice transition was self-balanced by the overburden pressure to result in the concentration between 20 and 30 m.

scholarly journals Review of the relationship between aggregates geology and Los Angeles and micro-Deval tests

2021 ◽  
Vol 80 (3) ◽  
pp. 1963-1980
Author(s):  
Solomon Adomako ◽  
Christian John Engelsen ◽  
Rein Terje Thorstensen ◽  
Diego Maria Barbieri
Keyword(s):  
Los Angeles ◽  
Crystal Size ◽  
Grain Shape ◽  
Mechanical Performance ◽  
Pore Space ◽  
Construction Material ◽  
Engineering Properties ◽  
Coarse Grained ◽  
The Impact ◽  
The Relationship

AbstractRock aggregates constitute the enormous volume of inert construction material used around the globe. The petrologic description as igneous, sedimentary, and metamorphic types establishes the intrinsic formation pattern of the parent rock. The engineering properties of these rocks vary due to the differences in the transformation process (e.g. hydrothermal deposits) and weathering effect. The two most common mechanical tests used to investigate the performance of aggregates are the Los Angeles (LA) and micro-Deval (MD) tests. This study reviewed the geological parameters (including mineralogy, grain and crystal size, grain shape, and porosity) and the relationship to Los Angeles and micro-Deval tests. It was found that high content of primary minerals in rocks (e.g. quartz and feldspar) is a significant parameter for performance evaluation. Traces of secondary and accessory minerals also affect the performance of rocks, although in many cases it is based on the percentage. Furthermore, some studies showed that the effect of mineralogic composition on mechanical strength is not sufficient to draw final conclusions of mechanical performance; therefore, the impact of other textural characteristics should be considered. The disposition of grain size and crystal size (e.g. as result of lithification) showed that rocks composed of fine-grain textural composition of ≤ 1 mm enhanced fragmentation and wear resistance than medium and coarse grained (≥ 1 mm). The effect of grain shape was based on convex and concave shapes and flat and elongated apexes of tested samples. The equidimensional form descriptor of rocks somehow improved resistance to impact from LA than highly flat and elongated particles. Lastly, the distribution of pore space investigated by means of the saturation method mostly showed moderate (R = 0.50) to strong (R = 0.90) and positive correlations to LA and MD tests.

scholarly journals Sintering, Microstructure, and Dielectric Properties of Copper Borates for High Frequency LTCC Applications

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4017
Author(s):  
Dorota Szwagierczak ◽  
Beata Synkiewicz-Musialska ◽  
Jan Kulawik ◽  
Norbert Pałka
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
High Frequency ◽  
Ceramic Materials ◽  
Sintering Behavior ◽  
Terahertz Time Domain Spectroscopy ◽  
Very High Frequency ◽  
X Ray ◽  
Low Dielectric ◽  
Very High

New ceramic materials based on two copper borates, CuB2O4 and Cu3B2O6, were prepared via solid state synthesis and sintering, and characterized as promising candidates for low dielectric permittivity substrates for very high frequency circuits. The sintering behavior, composition, microstructure, and dielectric properties of the ceramics were investigated using a heating microscope, X-ray diffractometry, scanning electron microscopy, energy dispersive spectroscopy, and terahertz time domain spectroscopy. The studies revealed a low dielectric permittivity of 5.1–6.7 and low dielectric loss in the frequency range 0.14–0.7 THz. The copper borate-based materials, owing to a low sintering temperature of 900–960 °C, are suitable for LTCC (low temperature cofired ceramics) applications.

scholarly journals Polytetrafluoroethylene Films in Rigid Polyurethane Foams’ Dielectric Permittivity Measurements with a One-Side Access Capacitive Sensor

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1173
Author(s):  
Ilze Beverte ◽  
Ugis Cabulis ◽  
Sergejs Gaidukovs
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
Low Frequency ◽  
Capacitive Sensor ◽  
Polyurethane Foams ◽  
Active Area ◽  
Ptfe Film ◽  
Practical Applications ◽  
Permittivity Measurements ◽  
The Impact

As a non-metallic composite material, widely applied in industry, rigid polyurethane (PUR) foams require knowledge of their dielectric properties. In experimental determination of PUR foams’ dielectric properties protection of one-side capacitive sensor’s active area from adverse effects caused by the PUR foams’ test objects has to be ensured. In the given study, the impact of polytetrafluoroethylene (PTFE) films, thickness 0.20 mm and 0.04 mm, in covering or simulated coating the active area of one-side access capacitive sensor’ electrodes on the experimentally determined true dielectric permittivity spectra of rigid PUR foams is estimated. Penetration depth of the low frequency excitation field into PTFE and PUR foams is determined experimentally. Experiments are made in order to evaluate the difference between measurements on single PUR foams’ samples and on complex samples “PUR foams + PTFE film” with two calibration modes. A modification factor and a small modification criterion are defined and values of modifications are estimated in numerical calculations. Conclusions about possible practical applications of PTFE films in dielectric permittivity measurements of rigid PUR foams with one-side access capacitive sensor are made.

scholarly journals Size-mediated, density-dependent cannibalism in the signal crayfish Pacifastacus leniusculus (Dana, 1852) (Decapoda, Astacidea), an invasive crayfish in Britain

Crustaceana ◽  
2017 ◽  
Vol 90 (4) ◽  
pp. 417-435 ◽  
Author(s):  
R. J. Houghton ◽  
C. Wood ◽  
X. Lambin
Keyword(s):  
Relative Size ◽  
Pacifastacus Leniusculus ◽  
Gut Contents ◽  
Size Distributions ◽  
Signal Crayfish ◽  
Density Dependent ◽  
Invasive Crayfish ◽  
The Relationship ◽  
Best Fit

The role of cannibalism in crayfish populations is not well understood, despite being a potentially key density-dependent process underpinning population dynamics. We studied the incidence of cannibalism in an introduced signal crayfish Pacifastacus leniusculus population in a Scottish lowland river in September 2014. Animals were sampled using six different sampling techniques simultaneously, revealing variable densities and size distributions across the site. Cannibalism prevalence was estimated by analysing the gut contents of crayfish >20 mm CL for the presence of crayfish fragments, which was found to be 20% of dissected individuals. When seeking evidence of relationships between the sizes of cannibals and ‘prey’, the density of conspecifics <56% the size of a dissected individual yielded the best fit. The relationship between cannibalism probability and crayfish size and density was equally well described by three different metrics of crayfish density. Cannibalism increased with crayfish size and density but did not vary according to sex. These results suggest that large P. leniusculus frequently cannibalize smaller (prey) conspecifics, and that the probability of cannibalism is dependent upon the relative size of cannibal-to-prey and the density of the smaller crayfish. We suggest that removing large individuals, as targeted by many traditional removal techniques, may lead to reduced cannibalism and therefore a compensatory increase in juvenile survival.

Study on Grain Moisture Detection System Based on the Theory of Dielectric Properties

2013 ◽  
Vol 333-335 ◽  
pp. 1558-1563
Author(s):  
Ling Bin Tan ◽  
Hai Yan Ji
Keyword(s):  
Dielectric Properties ◽  
Detection System ◽  
Capacitive Sensor ◽  
Extreme Environment ◽  
Single Chip ◽  
Display Module ◽  
Temperature Detection ◽  
Grain Moisture ◽  
Moisture Detection ◽  
The Relationship

After studying the relationship between the moisture content of crops and their relative permittivity, the principle of capacitive sensor and the research results of measuring micro-capacitance, this paper summarizes the theoretical basis of dielectric properties of grain, the dielectric properties of wheat, corn and rice, the relationship between the dielectric properties of these crops and their water content. With these theory analyses, the paper gives a full look on the grain moisture detection system by the means of dielectric properties, which consists of six parts, a cylindrical capacitor, signal conditioning circuits, single-chip control module with an A/D converter, temperature detection module, keyboard module and display module. The system is simple, and can adapt to extreme environment and accomplish the rapid detection in manufacturing. A description is given of the principle, its hardware circuit and software programming flow chart.

The relationship between forelimb morphology and behaviour in North American carnivores (Carnivora)

1999 ◽  
Vol 77 (7) ◽  
pp. 1064-1074 ◽  
Author(s):  
Andrew N Iwaniuk ◽  
Sergio M Pellis ◽  
Ian Q Whishaw
Keyword(s):  
North American ◽  
Significant Relationship ◽  
Feeding Behaviour ◽  
Prey Capture ◽  
Relative Size ◽  
Independent Contrasts ◽  
Important Indicator ◽  
Predatory Behaviour ◽  
Olecranon Process ◽  
The Relationship

We tested the validity of previously described relationships between forelimb structure and behaviour in mammals by measuring the forelimbs of 22 species of North American carnivores. Nine ratios were calculated from these measurements and made independent of the effects of allometry and phylogeny through the use of log-transformed regressions and independent contrasts analysis. The ratios were then directly compared with two behavioural traits: arboreal locomotion and vertebrate predation. Only five of the nine ratios exhibited a significant relationship with arboreal locomotion and three with vertebrate predation. It was concluded that the brachial index, relative size of the olecranon process, and total forelimb robusticity may be reliable predictors of arboreal locomotion, and that the brachial index, relative size of the olecranon process, and radial robusticity may be accurate predictors of vertebrate predation. The data also suggest that the morphology of the lower forelimb may be an important indicator of prey-capture and feeding behaviour in carnivores and could be used in conjunction with craniodental variables to extrapolate predatory behaviour of extinct species.

Sign in / Sign up

Export Citation Format

Share Document