Properties of rock types used in the experiments

2020 ◽  
pp. 48-55
Author(s):  
H.J.R. Deketh
Keyword(s):  
Rock Types

Correlation of Pore Structure and Permeability by SEM-Image Analysis

1990 ◽  
Vol 48 (1) ◽  
pp. 428-429
Author(s):  
C. A. Callender ◽  
Wm. C. Dawson ◽  
J. J. Funk
Keyword(s):  
Image Analysis ◽  
Pore Structure ◽  
Imaging System ◽  
Pore Space ◽  
Simulation Models ◽  
Image Analyzer ◽  
Imaging Data ◽  
Sem Images ◽  
Thin Sections ◽  
Rock Types

The geometric structure of pore space in some carbonate rocks can be correlated with petrophysical measurements by quantitatively analyzing binaries generated from SEM images. Reservoirs with similar porosities can have markedly different permeabilities. Image analysis identifies which characteristics of a rock are responsible for the permeability differences. Imaging data can explain unusual fluid flow patterns which, in turn, can improve production simulation models.Analytical SchemeOur sample suite consists of 30 Middle East carbonates having porosities ranging from 21 to 28% and permeabilities from 92 to 2153 md. Engineering tests reveal the lack of a consistent (predictable) relationship between porosity and permeability (Fig. 1). Finely polished thin sections were studied petrographically to determine rock texture. The studied thin sections represent four petrographically distinct carbonate rock types ranging from compacted, poorly-sorted, dolomitized, intraclastic grainstones to well-sorted, foraminiferal,ooid, peloidal grainstones. The samples were analyzed for pore structure by a Tracor Northern 5500 IPP 5B/80 image analyzer and a 80386 microprocessor-based imaging system. Between 30 and 50 SEM-generated backscattered electron images (frames) were collected per thin section. Binaries were created from the gray level that represents the pore space. Calculated values were averaged and the data analyzed to determine which geological pore structure characteristics actually affect permeability.

Identifikasi Potensi Air Tanah untuk Kebutuhan Penyediaan Air Bersih dengan Metode Geolistrik: Studi Kasus di Kawasan Geostech, Puspiptek Serpong

2020 ◽  
Vol 21 (2) ◽  
pp. 204-212
Author(s):  
Heru Sri Naryanto ◽  
Puspa Khaerani ◽  
Syakira Trisnafiah ◽  
Achmad Fakhrus Shomim ◽  
Wisyanto Wisyanto ◽  
...  
Keyword(s):  
Geophysical Methods ◽  
Groundwater Potential ◽  
Clean Water ◽  
Rock Types ◽  
Groundwater Aquifers ◽  
Groundwater Aquifer ◽  
Groundwater Origin ◽  
Laboratory Facility ◽  
Potential Groundwater ◽  
Lower Depth

ABSTRACTGeostech Building, as an office and laboratory facility, requires a source of clean water from groundwater related to the limited supply of clean water from the PDAM. Due to the needs of freshwater from groundwater origin, data and information are needed regarding the potential groundwater in the area, including aquifer configuration, depth, and groundwater potential. The presence of groundwater is not distributed through every area, and it's related to the geological and geohydrological conditions. One of the geophysical methods that can describe subsurface is 2D geoelectric methods. This method can distinguish and analyze rock types, geological structures, groundwater aquifers, and other important information based on the characteristics of the electricity of rocks by looking at the value of the type of resistance. In this measurement, the Wenner Alpha configuration has been used, where the arrangement of A-B current electrodes and M-N potential electrodes have constant spacing. From the measurement results, it can be interpreted that there is a low resistivity layer containing porous groundwater as an aquifer. Based on regional geological data, it has been estimated that this layer is in the form of sandy tuff (0-1.5 ohm-m). The exploitation of groundwater with drilling is expected to reach the aquifer's upper layer at depth, starting from 11.5-13 meters. The groundwater aquifer thickness cannot be ascertained because of the penetration of the lower depth of 2D geoelectric measurements truncated by the constraint of a maximum stretch of cable. The upper layer of the aquifer contains a turned layer of fine tufa and medium tuff, which is impermeable, coarse tuff, and mixed soil with varying thickness at the upper layer.Keywords: 2D geoelectric, aquifer, potential groundwater, Geostech  ABSTRAKGedung Geostech sebagai sarana perkantoran dan laboratorium memerlukan sumber air bersih dari air tanah terkait dengan terbatasnya suplai air bersih dari PDAM. Kebutuhan air bersih berasal dari air tanah, maka diperlukan data dan informasi mengenai kondisi potensi air tanah di kawasan tersebut termasuk konfigurasi akuifer, kedalaman, dan potensi air tanahnya. Keberadaan air tanah tidaklah merata untuk setiap tempat dan sangat terkait dengan kondisi geologi dan geohidrologinya. Salah satu metode geofisika yang dapat memberikan gambaran kondisi bawah permukaan adalah dengan metode geolistrik 2D. Metode ini dapat membedakan dan menganalisis jenis batuan, struktur geologi, akuifer air tanah, dan informasi penting lainnya berdasarkan sifat kelistrikan batuan dengan melihat nilai tahanan jenisnya. Dalam pengukuran ini digunakan konfigurasi Wenner Alpha, dimana susunan elektroda arus A dan B dan elektroda potensial M dan N mempunyai spasi yang konstan. Dari hasil pengukuran dapat diinterpretasikan adanya lapisan dengan resistivitas rendah yang mengandung air tanah dan bersifat porous sebagai akuifer. Berdasarkan data geologi regional diperkirakan lapisan ini berupa tuf pasiran (0-1,5 ohm-m). Pengambilan air tanah dengan pemboran diperkirakan akan mengenai batas atas lapisan akuifer pada kedalaman 11,5-13 meter. Ketebalan akuifer air tanah tidak bisa dihitung karena penetrasi kedalaman pengukuran geolistrik 2D terbatasi oleh bentangan elektroda di permukaan. Lapisan di atas akuifer merupakan lapisan selang-seling tuf halus dan tuf sedang yang kedap air, tuf kasar, dan pada bagian paling atas merupakan tanah urugan dengan ketebalan bervariasi.Kata kunci: Geolistrik 2D, akuifer, potensi air tanah, Geostech  

Wear performance and mechanisms of H13 steels sliding against different Rock types

2020 ◽  
Vol 8 (2) ◽  
pp. 025003
Author(s):  
Jiyu Tian ◽  
Yong Hu ◽  
Xin Liu ◽  
Zilong Yang
Keyword(s):  
Wear Performance ◽  
Rock Types

Petrological and geochemical characterization of the arc-related Suru–Thasgam ophiolitic slice along the Indus Suture Zone, Ladakh Himalaya

2021 ◽  
pp. 1-20
Author(s):  
I.M. Bhat ◽  
T. Ahmad ◽  
D.V. Subba Rao ◽  
N.V. Chalapathi Rao
Keyword(s):  
Suture Zone ◽  
Secondary Mineral ◽  
High Field Strength ◽  
Geochemical Characterization ◽  
Rock Types ◽  
Ladakh Himalaya ◽  
Magnesian Olivine ◽  
Textural Relationship ◽  
Ree Patterns

Abstract The Ladakh Himalayan ophiolites preserve remnants of the eastern part of the Neo-Tethyan Ocean, in the form of Dras, Suru Valley, Shergol, Spongtang and Nidar ophiolitic sequences. In Kohistan region of Pakistan, Muslim Bagh, Zhob and Bela ophiolites are considered to be equivalents of Ladakh ophiolites. In western Ladakh, the Suru–Thasgam ophiolitic slice is highly dismembered and consists of peridotites, pyroxenites and gabbros, emplaced as imbricate blocks thrust over the Mesozoic Dras arc complex along the Indus Suture Zone. The Thasgam peridotites are partially serpentinized with relict olivine, orthopyroxene and minor clinopyroxene, as well as serpentine and iron oxide as secondary mineral assemblage. The pyroxenites are dominated by clinopyroxene followed by orthopyroxene with subordinate olivine and spinel. Gabbros are composed of plagioclase and pyroxene (mostly replaced by amphiboles), describing an ophitic to sub-ophitic textural relationship. Geochemically, the studied rock types show sub-alkaline tholeiitic characteristics. The peridotites display nearly flat chondrite-normalized rare earth element (REE) patterns ((La/Yb)N = 0.6–1.5), while fractionated patterns were observed for pyroxenites and gabbros. Multi-element spidergrams for peridotites, pyroxenites and gabbros display subduction-related geochemical characteristics such as enriched large-ion lithophile element (LILE) and depleted high-field-strength element (HFSE) concentrations. In peridotites and pyroxenites, highly magnesian olivine (Fo88.5-89.3 and Fo87.8-89.9, respectively) and clinopyroxene (Mg no. of 93–98 and 90–97, respectively) indicate supra-subduction zone (SSZ) tectonic affinity. Our study suggests that the peridotites epitomize the refractory nature of their protoliths and were later evolved in a subduction environment. Pyroxenites and gabbros appear to be related to the base of the modern intra-oceanic island-arc tholeiitic sequence.

scholarly journals Multi-method site characterization to verify the hard rock (Site Class A) assumption at 25 seismograph stations across Eastern Canada

2021 ◽  
pp. 875529302110010
Author(s):  
Sameer Ladak ◽  
Sheri Molnar ◽  
Samantha Palmer
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Hard Rock ◽  
Site Characterization ◽  
Eastern Canada ◽  
Site Class ◽  
Paleozoic Rock ◽  
Rock Types ◽  
Site Period

Site characterization is a crucial component in assessing seismic hazard, typically involving in situ shear-wave velocity ( VS) depth profiling, and measurement of site amplification including site period. Noninvasive methods are ideal for soil sites and become challenging in terms of field logistics and interpretation in more complex geologic settings including rock sites. Multiple noninvasive active- and passive-seismic techniques are applied at 25 seismograph stations across Eastern Canada. It is typically assumed that these stations are installed on hard rock. We investigate which site characterization methods are suitable at rock sites as well as confirm the hard rock assumption by providing VS profiles. Active-source compression-wave refraction and surface wave array techniques consistently provide velocity measurements at rock sites; passive-source array testing is less consistent but it is our most suitable method in constraining the rock VS. Bayesian inversion of Rayleigh wave dispersion curves provides quantitative uncertainty in the rock VS. We succeed in estimating rock VS at 16 stations, with constrained rock VS estimates at 7 stations that are consistent with previous estimates for Precambrian and Paleozoic rock types. The National Building Code of Canada uses solely the time-averaged shear-wave velocity of the upper 30 m ( VS30) to classify rock sites. We determine a mean VS30 of ∼ 1600 m/s for 16 Eastern Canada stations; the hard rock assumption is correct (>1500 m/s) but not as hard as often assumed (∼2000 m/s). Mean variability in VS30 is ∼400 m/s and can lead to softer rock classifications, in particular, for Paleozoic rock types with lower average rock VS near the hard/soft rock boundary. Microtremor and earthquake horizontal-to-vertical spectral ratios are obtained and provide site period classifications as an alternative to VS30.

scholarly journals Rock Emissivity Measurement for Infrared Thermography Engineering Geological Applications

2021 ◽  
Vol 11 (9) ◽  
pp. 3773
Author(s):  
Simone Mineo ◽  
Giovanna Pappalardo
Keyword(s):  
Surface Temperature ◽  
Infrared Thermography ◽  
High Sensitivity ◽  
Point Of View ◽  
Rock Surface ◽  
Rock Types ◽  
Ornamental Stones ◽  
Emissivity Measurement ◽  
Laboratory Tool ◽  
Non Destructive

Infrared thermography is a growing technology in the engineering geological field both for the remote survey of rock masses and as a laboratory tool for the non-destructive characterization of intact rock. In this latter case, its utility can be found either from a qualitative point of view, highlighting thermal contrasts on the rock surface, or from a quantitative point of view, involving the study of the surface temperature variations. Since the surface temperature of an object is proportional to its emissivity, the knowledge of this last value is crucial for the correct calibration of the instrument and for the achievement of reliable thermal outcomes. Although rock emissivity can be measured according to specific procedures, there is not always the time or possibility to carry out such measurements. Therefore, referring to reliable literature values is useful. In this frame, this paper aims at providing reference emissivity values belonging to 15 rock types among sedimentary, igneous and metamorphic categories, which underwent laboratory emissivity estimation by employing a high-sensitivity thermal camera. The results show that rocks can be defined as “emitters”, with emissivity generally ranging from 0.89 to 0.99. Such variability arises from both their intrinsic properties, such as the presence of pores and the different thermal behavior of minerals, and the surface conditions, such as polishing treatments for ornamental stones. The resulting emissivity values are reported and commented on herein for each different studied lithology, thus providing not only a reference dataset for practical use, but also laying the foundation for further scientific studies, also aimed at widening the rock aspects to investigate through IRT.

scholarly journals Flood vulnerability assessment in the Accra Metropolis, southeastern Ghana

2021 ◽  
Vol 11 (7) ◽  
Author(s):  
Benjamin Wullobayi Dekongmen ◽  
Amos Tiereyangn Kabo-bah ◽  
Martin Kyereh Domfeh ◽  
Emmanuel Daanoba Sunkari ◽  
Yihun Taddele Dile ◽  
...  
Keyword(s):  
Drainage Density ◽  
Geological Structures ◽  
Flood Vulnerability ◽  
Rock Types ◽  
Digital Elevation ◽  
Annual Population ◽  
Density Values ◽  
High Runoff ◽  
Elevation Model ◽  
Very High

AbstractFloods in Ghana have become a perennial challenge in the major cities and communities located in low-lying areas. Therefore, cities and communities located in these areas have been classified as potential or natural flood-prone zones. In this study, the Digital Elevation Model (DEM) of the Accra Metropolis was used to assess the drainage density and elevation patterns of the area. The annual population estimation data and flood damages were assessed to understand the damages and population trend. This research focused primarily on the elevation patterns, slope patterns, and drainage density of the Accra Metropolis. Very high drainage density values, which range between 149 and 1117 m/m2, showed very high runoff converging areas. High drainage density was also found to be in the range of 1117–1702 m/m2, which defined the area as a high runoff converging point. The medium and low converging points of runoff were also found to be ranging between 1702–2563 m/m2 and 2563–4070 m/m2, respectively. About 32% of the study area is covered by natural flood-prone zones, whereas flood-prone zones also covered 33% and frequent flood zones represent 25%. Areas in the Accra Metropolis that fall in the Accraian and Togo series rock types experience high floods. However, the lineament networks (geological structures) that dominate the Dahomeyan series imply that the geological structures in the Dahomeyan series also channel the runoffs into the low-lying areas, thereby contributing to the perennial flooding in the Accra Metropolis.

scholarly journals Study of Rock Mass Rating (RMR) and Geological Strength Index (GSI) Correlations in Granite, Siltstone, Sandstone and Quartzite Rock Masses

2021 ◽  
Vol 11 (8) ◽  
pp. 3351
Author(s):  
Gabor Somodi ◽  
Neil Bar ◽  
László Kovács ◽  
Marco Arrieta ◽  
Ákos Török ◽  
...  
Keyword(s):  
Rock Mass ◽  
Linear Equations ◽  
Geological Strength Index ◽  
Gold Mine ◽  
Strength Index ◽  
Comprehensive Understanding ◽  
Rock Types ◽  
Mass Classification ◽  
Waste Repository ◽  
And Performance

A comprehensive understanding of geological, structural geological, hydrogeological and geotechnical features of the host rock are essential for the design and performance evaluation of surface and underground excavations. The Hungarian National Radioactive Waste Repository (NRWR) at Bátaapáti is constructed in a fractured granitic formation, and Telfer Gold Mine in Australia is excavated in stratified siltstones, sandstones and quartzites. This study highlights relationships between GSI chart ratings and calculated GSI values based on RMR rock mass classification data. The paper presents linear equations for estimating GSI from measured RMR89 values. Correlations between a and b constants were analyzed for different rock types, at surface and subsurface settings.

The Metasomatized Mantle beneath the North Atlantic Craton: Insights from Peridotite Xenoliths of the Chidliak Kimberlite Province (NE Canada)

2019 ◽  
Vol 60 (10) ◽  
pp. 1991-2024 ◽  
Author(s):  
M G Kopylova ◽  
E Tso ◽  
F Ma ◽  
J Liu ◽  
D G Pearson
Keyword(s):  
North Atlantic ◽  
Thermal State ◽  
Mineral Chemistry ◽  
Mantle Metasomatism ◽  
Labrador Sea ◽  
The North ◽  
Rock Types ◽  
History Of ◽  
The North Atlantic ◽  
North Atlantic Craton

Abstract We studied the petrography, mineralogy, thermobarometry and whole-rock chemistry of 120 peridotite and pyroxenite xenoliths collected from the 156–138 Ma Chidliak kimberlite province (Southern Baffin Island). Xenoliths from pipes CH-1, -6, -7 and -44 are divided into two garnet-bearing series, dunites–harzburgites–lherzolites and wehrlites–olivine pyroxenites. Both series show widely varying textures, from coarse to sheared, and textures of late formation of garnet and clinopyroxene. Some samples from the lherzolite series may contain spinel, whereas wehrlites may contain ilmenite. In CH-6, rare coarse samples of the lherzolite and wehrlite series were derived from P = 2·8 to 5·6 GPa, whereas predominant sheared and coarse samples of the lherzolite series coexist at P = 5·6–7·5 GPa. Kimberlites CH-1, -7, -44 sample mainly the deeper mantle, at P = 5·0–7·5 GPa, represented by coarse and sheared lherzolite and wehrlite series. The bulk of the pressure–temperature arrays defines a thermal state compatible with 35–39 mW m–2 surface heat flow, but a significant thermal disequilibrium was evident in the large isobaric thermal scatter, especially at depth, and in the low thermal gradients uncharacteristic of conduction. The whole-rock Si and Mg contents of the Chidliak xenoliths and their mineral chemistry reflect initial high levels of melt depletion typical of cratonic mantle and subsequent refertilization in Ca and Al. Unlike the more orthopyroxene-rich mantle of many other cratons, the Chidliak mantle is rich (∼83 vol%) in forsteritic olivine. We assign this to silicate–carbonate metasomatism, which triggered wehrlitization of the mantle. The Chidliak mantle resembles the Greenlandic part of the North Atlantic Craton, suggesting the former contiguous nature of their lithosphere before subsequent rifting into separate continental fragments. Another, more recent type of mantle metasomatism, which affected the Chidliak mantle, is characterized by elevated Ti in pyroxenes and garnet typical of all rock types from CH-1, -7 and -44. These metasomatic samples are largely absent from the CH-6 xenolith suite. The Ti imprint is most intense in xenoliths derived from depths equivalent to 5·5–6·5 GPa where it is associated with higher strain, the presence of sheared samples of the lherzolite series and higher temperatures varying isobarically by up to 200 °C. The horizontal scale of the thermal-metasomatic imprint is more ambiguous and could be as regional as tens of kilometers or as local as <1 km. The time-scale of this metasomatism relates to a conductive length-scale and could be as short as <1 Myr, shortly predating kimberlite formation. A complex protracted metasomatic history of the North Atlantic Craton reconstructed from Chidliak xenoliths matches emplacement patterns of deep CO2-rich and Ti-rich magmatism around the Labrador Sea prior to the craton rifting. The metasomatism may have played a pivotal role in thinning the North Atlantic Craton lithosphere adjacent to the Labrador Sea from ∼240 km in the Jurassic to ∼65 km in the Paleogene.

Sign in / Sign up

Export Citation Format

Share Document