scholarly journals Design-technological support of quality and competitive ability of engineering products

2017 ◽  
Vol 2 (7) ◽  
pp. 25-28 ◽  
Author(s):  
Анатолий Суслов ◽  
Anatoliy Suslov
Keyword(s):  
Product Quality ◽  
Competitive Ability ◽  
Engineering Product ◽  
Technological Support ◽  
Design And Manufacturing ◽  
Definition Of

The solution of the problem of the assurance of competitive ability and quality of engineering products during their design and manufacturing is stated. The dependence for the definition of a complex factor of engineering product competitive ability is shown. The concept of life optimum is given. The structural procedures for the solution of problems of a designer and technologist for the assurance of engineering product quality are shown.

Methodology for managing quality indicators of hardware products with elements of robust design

2020 ◽  
pp. 38-43
Author(s):  
K. G. Pivovarova ◽  
◽  
A. G. Korchunov ◽  
Keyword(s):  
Product Quality ◽  
Quality Indicators ◽  
Robust Design ◽  
Control Method ◽  
Efficient Production ◽  
Related Quality ◽  
Definition Of ◽  
Noise Factors ◽  
The Impact

Production of metalware is characterized with a great variety of shapes and sizes, originality of each product and a multiple-stage process. Various techniques used to process steel sections (such as cold and hot forming, machining, heat treatment, etc.) make it significantly more difficult to tackle product quality problems. Modern product quality management methodologies are based on a wide use of economical, organizational, technical and other methods. This paper describes a production-related quality control method involving certain elements of robust design. This method is based on the definition of noise factors and control parameters, as well as the conduction of noise and principal experiments. The noise experiment will help estimate the impact of disturbing factors (environmental or industrial) on product quality indicators, whereas the principal experiment will help identify the optimum production mode that can deliver the best quality and, at the same time, minimize the production losses. Robust design techniques can be effectively utilized to control the quality of metalware when developing new and optimizing the existing processes. The paper gives an example of how the quality of S10S steel bars can be controlled through the application of efficient production modes enabling to minimize quality-related costs.

scholarly journals Evaluation of product quality with decibels

2021 ◽  
Vol 11 (2) ◽  
pp. 106-114
Author(s):  
Branko Popović
Keyword(s):  
Product Quality ◽  
Technology Development ◽  
Quality Characteristics ◽  
Measuring Instruments ◽  
Software Service ◽  
Definition Of ◽  
Accuracy Indices ◽  
Required Quality ◽  
Japanese Scientist

In modern Quality Engineering, the quality of process results, the quality of measuring instruments, and the quality of completed processes are considered according to their quality characteristics. However, in traditional engineering, only the quality of measuring instruments and the quality of completed processes (precision or accuracy indices PCI, PPI) can be successfully defined, while the quality of process results (semi-finished product, product, software, service) can only be described (has or does not have the required quality), good or bad quality, better or worse quality). In the modern consideration of quality, the quality of process results is now defined by the number of decibels [dB], according to the discovery of the genius Japanese scientist Genichi Taguchi (1924-2012), with the methods of Robust Technology Development and Standard Ratio (S/N). This paper discusses definition of the quality of process results with one input variable and continuous characteristics with three illustrative examples.

scholarly journals Engineering product quality control at all stages of product life

2018 ◽  
Vol 2018 (3) ◽  
pp. 22-25
Author(s):  
Анатолий Суслов ◽  
Anatoliy Suslov
Keyword(s):  
Quality Control ◽  
Product Quality ◽  
Competitive Ability ◽  
High Quality ◽  
Product Quality Control ◽  
Engineering Product ◽  
Product Life ◽  
Assembly Operation ◽  
Product Manufacturing

In the paper it is shown that at quality control of engineering products particular attention should be paid to engineering and technological measures which exert basic influence upon assurance and quality increase. Technical and technological measures are shown at all stages of product life: marketing; design; technological pre-production; manufacturing materials, blanks, parts and their assembly; operation; repair and utilization. It is emphasized that still at the preliminary stages it is necessary that a factor of competitive ability of a product designed should be defined. It is shown convincingly that engineering product quality is formed at the stage of design and ensured at the stage of manufacturing. The realization of measures shown in the paper allows ensuring high-quality competitive engineering product manufacturing at enterprises.

Immunoferritin localization of intracellular antigens in positively stained frozen sections

1978 ◽  
Vol 36 (2) ◽  
pp. 168-169
Author(s):  
K. T. Tokuyasu
Keyword(s):  
Surface Tension ◽  
Water Surface ◽  
Thin Layers ◽  
The Other ◽  
Positive Staining ◽  
Frozen Sections ◽  
The Past ◽  
Ultrathin Frozen Sections ◽  
Definition Of

During the past investigations of immunoferritin localization of intracellular antigens in ultrathin frozen sections, we found that the degree of negative staining required to delineate u1trastructural details was often too dense for the recognition of ferritin particles. The quality of positive staining of ultrathin frozen sections, on the other hand, has generally been far inferior to that attainable in conventional plastic embedded sections, particularly in the definition of membranes. As we discussed before, a main cause of this difficulty seemed to be the vulnerability of frozen sections to the damaging effects of air-water surface tension at the time of drying of the sections.Indeed, we found that the quality of positive staining is greatly improved when positively stained frozen sections are protected against the effects of surface tension by embedding them in thin layers of mechanically stable materials at the time of drying (unpublished).

The Influence Of The Led Luminaires Electrical Parameters On Their Correlated Colour Temperature During Operation Mode

2020 ◽  
pp. 89-96
Author(s):  
Sergei S. Kapitonov ◽  
Alexei S. Vinokurov ◽  
Sergei V. Prytkov ◽  
Sergei Yu. Grigorovich ◽  
Anastasia V. Kapitonova ◽  
...  
Keyword(s):  
Operation Mode ◽  
Light Sources ◽  
Electrical Parameters ◽  
Colour Temperature ◽  
Radiation Spectra ◽  
Service Period ◽  
Close Proximity ◽  
Definition Of ◽  
Comprehensive Study

The article describes the results of comprehensive study aiming at increase of quality of LED luminaires and definition of the nature of changes in their correlated colour temperature (CCT) in the course of operation. Dependences of CCT of LED luminaires with remote and close location of phosphor for 10 thousand hours of operation in different electric modes were obtained; the results of comparison between the initial and final radiation spectra of the luminaires are presented; using mathematical statistics methods, variation of luminaire CCT over the service period claimed by the manufacturer is forecast; the least favourable electric operation modes with the highest CCT variation observed are defined. The obtained results have confirmed availability of the problem of variation of CCT of LED luminaires during their operation. Possible way of its resolution is application of more qualitative and therefore expensive LEDs with close proximity of phosphor or LEDs with remote phosphor. The article may be interesting both for manufacturers and consumers of LED light sources and lighting devices using them.

PENGARUH KUALITAS PRODUK DAN RELIGIUSITAS TERHADAP KEPUTUSAN NASABAH PRODUK SIMPANAN PADA BSM CABANG PURWOKERTO

2017 ◽  
Vol 4 (1) ◽  
pp. 189-215
Author(s):  
Yoiz Shofwa Shafrani
Keyword(s):  
Regression Analysis ◽  
Product Quality ◽  
Linear Regression Analysis ◽  
Multiple Linear Regression Analysis ◽  
Analytical Tool ◽  
The Other ◽  
Financial Assets ◽  
Islamic Bank

Perkembangan dunia perbankan syariah tidak lepas dari peran para nasabah yang memberikan kepercayaan terhadap pihak perbankan untuk penyimpanan asset keuangannya. Faktanya banyak kelompok nasabah yang memutuskan untuk menjadi nasabah di perbankan syariah karena faktor religiusitasnya. Faktor lain yang dapat ikut mempengaruhi keputusan nasabah adalah kualitas produk. Di mana kualitas produk merupakan karakteristik yang melekat dari suatu produk. Kemungkinan yang terjadi bahwa kebanyakan nasabah pada perbankan syariah juga masih merupakan nasabah perbankan konvensional.Tujuan yang ingin dicapai dalam penelitian ini adalah untuk mengetahui pengaruh kualitas produk dan tingkat religiusitas nasabah terhadap keputusan nasabah untuk menyimpan dananya atau tidak di BSM Cabang Purwokerto. Alat analisis yang digunakan adalah analisis regresi linier berganda, dengan jumlah sampel 100 nasabah. Diperoleh hasil Y = 5,046 + 0,101X1 + 0,218X2. Berdasarkan uji F yang sudah dilakukan maka dapat diketahui bahwa variabel kualitas produk dan religiusitas secara bersama – sama berpengaruh terhadap keputusan nasabah untuk menyimpan dananya di BSM Cabang Purwokerto. Berdasarkan uji t yang sudah dilakukan dapat diketahui bahwa secara partial baik variabel kualitas produk maupun variabel religiusitas berpengaruh terhadap keputusan nasabah untuk menyimpan dananya di BSM Cabang Purwokerto. The progress of the Islamic bank cannot be separated from the role of its customers who give trust to the bank to deposit their financial assets. It is a fact many groups of customers decide to be the customers of the Islamic bank because of their religiosity. The other influences factor of a customer’s decision is the quality of the product. The aim of this research was to determine the effect of product quality and level of customers’ religiosity towards customers’ decision whether to keep their funds in Syariah Mandiri Bank, Branch of Purwokerto, or not. The analytical tool used was multiple linear regression analysis, with a sample of 100 customers. The results indicate Y = 5,046 + 0,101X1 + 0,218X2. Based on F, it can be seen that both variables of product quality and religiosity simultanously affect the customers’ decision to keep theirfunds in BSM Branch of Purwokerto. Based on t test, it can be seen that independently, either variable of product quality or variables of religiosityinfluences the customers’ decision to keep their funds in BSM Branch of Purwokerto.

Assessment of multimorbidity of diseases in geriatric practice

2020 ◽  
pp. 17-21
Author(s):  
Mark Oprenko
Keyword(s):  
Quality Of Life ◽  
The Core ◽  
Definition Of

The definition of the multimorbidity concept reveals insufficient specificity of the comorbidity and multimorbidity definitions and, as a result, confusion in the use of these terms. Most authors are unanimous that the “core” of multimorbidity is presence of more than one disease in a patient. These coexisting diseases can be pathogenetically interconnected and non-interconnected. Regardless, the degree of multimorbidity always affects prognosis and quality of life.

PENGARUH CITRA MEREK DAN KUALITAS BENIH TERHADAP KEPUTUSAN PEMBELIAN PADA PT.PRABU ARGO MANDIRI (Studi Kasus Penjualan Benih Tomat Merk Maya di Purwkarta)

2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Ahmad Iskandar
Keyword(s):  
Product Quality ◽  
Brand Image ◽  
Hypothesis Test ◽  
Descriptive Analysis ◽  
Linear Regression Analysis ◽  
Coefficient Of Determination ◽  
Decision Variable ◽  
Purchasing Decisions ◽  
Business World

In the era of globalization, the competition in the business world becomes very tight. Companies vying to be able to continue to compete and survive in the business world. Each consumer must have had the expectation that the products they buy are able to provide satisfaction for them to be making purchasing decisions. Consumer purchasing decisions of companies to seeds virtual brand still low due to the brand image and quality of seeds that are still unsatisfactory.This study aims to determine the responses of respondents regarding brand image, product quality, purchasing decisions and how big an impact on the brand image itself against purchase decisions on the PT. Prabu Argo Mandiri Bandung and how much influence the quality of products on the purchase decision.The method by which the samples is Simple Random Sampling consists of 80 respondents. The method of analysis in this research using descriptive analysis and verification which is composed of multiple linear regression analysis. Product moment correlation analysis, and the coefficient of determination used to measure the level of influence of brand image and product quality on purchasing decisions.The results based on descriptive analysis of brand image variable is in good enough category, variable quality of the product is in the unfavorable category, and the purchase decision variable is in the unfavorable category. The results based on correlation test showed that the brand image is partially significant effect on purchasing decisions by 68% and the product quality is partially significant effect on purchasing decisions by 13%. Hypothesis test results suggested that the increased purchasing decisions partially and simultaneously influence through brand image and product quality.

Sign in / Sign up

Export Citation Format

Share Document