scholarly journals INFLUENСE OF SEASONAL FACTOR ON THE CHEMICAL COMPOSITION OF PERSIMMON

2019 ◽  
Vol 7 ◽  
pp. 891-898
Author(s):  
Irina Bejanidze ◽  
Tina Kharebava ◽  
Nargiz Alasania ◽  
Nato Didmanidze ◽  
Nazi Davitadze
Keyword(s):  
Chemical Composition ◽  
Raw Material ◽  
Bioactive Substances ◽  
Industrial Processing ◽  
Persimmon Fruit ◽  
Seasonal Factor ◽  
Molecular Substances ◽  
Growing Conditions ◽  
Solids Content ◽  
Maturity Degree

Persimmon is one of the most popular and favorite fruits not only in Georgia, but also in other countries. People love it for its unique specific taste and high nutritional value. There are more than 500 types of persimmon, properties and tastes which depend on the persimmon growing conditions. The purpose of this project was to study the persimmon fruit chemical composition, the regularity in the quantity changes of the bioactive substances and technical-economical persimmon parameters during its storage and technological processing; to develop a highly profitable and efficient composite production technology for a new assortment of products and high quality beverages. Organoleptic and chemical tests of 12 persimmon fruit varieties were made. The content and composition of sugars, polyphenols, pectin, and tanning substances, were defined; and the relation of these parameters to the fruit maturity degree, the dynamics of their change in the ripening and storage process were determined. In addition, we determined the content of sugars ( inverted, total, saccharose), tanning substances (free, total), polyphenols and nitrogen through a spectrophotometric method, dry solids through a refractometric method, pectin (total, soluble, protopectin) and acidity through a potentiometric method, and cellulose through a chlorite method. The feasibility of the persimmon fruit industrial processing was established. Persimmon fruit of Khachia and Khiakume varieties were proved to be the best raw material for the industrial production of a fruit alcohol and beverages. It should be noted here that persimmon fruit must be harvested in November when they have a dark orange colouring and their dry solids content reaches 18%, inverted sugars make up 16-16.5%, and the acidity is 0.12%. For concentrate production, persimmon must be harvested in October when the fruit are yellow and their tanning and colouring substances reach 1.24%, and pectin substances make up 0.77%. The fruit sugars are glucose and fructose, generally in equal quantities. Tanning substances, leicoantocianes, in particular, are responsible for the tart taste; the lower their content is, the less the tart taste is felt, moreover, ripe fruit are less tart in flavour which is due to the tanning substances getting bound with high molecular substances. All the 12 persimmon varieties cultivated in Georgia can be used as raw material, including substandard and overripe fruit that are not marketable and do not have a long shelf life.

scholarly journals Experimental Determination of Biologically Active Compounds in Pomace of Siberian Beet and Carrot

2021 ◽  
Vol 51 (1) ◽  
pp. 179-187
Author(s):  
Anastasia Kozhemayko ◽  
Irina Sergeeva ◽  
Irina Dolgolyuk
Keyword(s):  
Functional Food ◽  
Nutritional Value ◽  
Raw Materials ◽  
Dry Weight ◽  
Biologically Active ◽  
Raw Material ◽  
Positive Trend ◽  
Bioactive Substances ◽  
Industrial Processing

Introduction. With the development of the food and processing industry, the matter of environmental pollution is becoming more and more acute. Environmental protection is based on the principle of rational use of natural resources and sustainable technology. Vegetable pomace is a secondary raw material; its amount depends on the production technology and equipment. The observed positive trend in the gross harvest of vegetables in open ground can increase the number of vegetable processing enterprises and the capacity of existing enterprises. Eventually, waste will start accumulating at processing sites, and it will have to be used as raw materials. The present paper features the content of biologically active substances in pomace of carrots and beets grown on the territory of the Siberian region and introduces options for their further use in functional foods. Study objects and methods. The research featured carrot pomace of the varieties Losinoostrovskaya, Nantskaya, and Queen of Autumn, as well as beet pomace of varieties Cylinder and Bordeaux. All the samples were harvested in the Kemerovo region in 2019. Determination of physical and chemical parameters was carried out using standard methods. Carotenoids, flavonoids, β-cyanine were studied using spectrometry and photocolorimetric method. Results and discussion. The experiment featured the content of bioactive substances in pomace of carrots and beets obtained during industrial processing. The content of carotenoids in carrots (mg of β-carotene per 100 g of dry weight): for Losinoostrovskaya variety – 23.56 ± 0.23; Nantskaya – 25.32 ± 0.18; Queen of Autumn – 20.78 ± 0.25. Flavonoid content (mg of catechol equivalent per 100 g of dry weight): Losinoostrovskaya – 12.02 ± 0.37; Nantskaya – 13.45 ± 0.56; Queen of Autumn – 11.50 ± 0.48. The content of β-cyanine in beets (mg per 100 g of dry weight): Cylinder – 100.0 ± 8.5; Bordeaux – 35.0 ± 1.8. The nutritional value of carrot and beet pomace with a mass fraction of moisture was 10%. The nutritional value of vegetable pomace is due to the high content of dietary fiber; therefore, the raw materials can be considered for functional food production. The content of biologically active substances in vegetable pomace (flavonoids, carotenoids, β-cyanines) can enhance the functional orientation of this secondary raw material when used in food technologies for the production of food of high nutritional value. Conclusion. The results obtained will make it possible to use the biochemical potential of plant raw materials in many aspects, as well as to obtain new functional food products, thereby expanding the range of healthy foods.

PROGNOSTIC VIEW ON THE PROSPECTS OF PROCESSING WHEY

2018 ◽  
Author(s):  
А.Г. ХРАМЦОВ
Keyword(s):  
Chemical Composition ◽  
Raw Material ◽  
Cottage Cheese ◽  
Animal Origin ◽  
Industrial Processing ◽  
Wide Range

Рассмотрена молочная сыворотка – побочный продукт при производстве сыров, творога и казеина как универсальное сырье животного происхождения. Обобщены результаты исследований российских и зарубежных ученых химического состава молочной сыворотки, и показаны основные направления ее промышленной переработки. Представлены широкий спектр продуктов из молочной сыворотки и направления их использования в разных отраслях промышленности. Whey is a by-product in the production of cheese, cottage cheese and casein as a universal raw material of animal origin is considered. The results of studies of Russian and foreign scientists of the chemical composition of whey are summarized. The main directions of its industrial processing are shown. A wide range of products from whey and directions of their use in different industries are presented.

PEAS AND PRODUCTS OF ITS PROCESSING OF - NONCONVENTIONAL RAW MATERIAL RESOURCES

2020 ◽  
Author(s):  
D.Y. Bolgova ◽  
◽  
N.A. Tarasenko ◽  
Z.S. Mukhametova ◽  
◽  
...  
Keyword(s):  
Chemical Composition ◽  
Human Health ◽  
Food Production ◽  
Food Industry ◽  
Raw Material ◽  
Plant Proteins ◽  
Material Resources ◽  
The Rich

Nutrition is an important factor that affects human health. The use of plant proteins as various additives in food production has now been actively developed. The rich chemical composition of pea grains determines the possibility of application in the food industry. Peas are characterized by good assimilability and degree of digestion.

UNIDO, Industrial Processing of Natural Resources. New York: United Nations. 1981. viii + 78pp.US $ 5.00. [United Nations Publication Sales No. E. 81. 11 . B.1]

1982 ◽  
Vol 21 (4) ◽  
pp. 329-333
Author(s):  
Rashid Aziz
Keyword(s):  
New York ◽  
United Nations ◽  
Industrial Development ◽  
Raw Materials ◽  
Developed Countries ◽  
Raw Material ◽  
Industrial Processing ◽  
Depth Study ◽  
Manufactured Exports ◽  
Year 2000

The book under review is a concise but fairly in-depth study of the prospects for export diversification from the Less Developed Countries (henceforth labeled as LDCs) particularly to Developed Countries (henceforth labeled as OCs). Given the multiple problems faced by the LOCs in exporting to the OCs - protectionist policies with regards to manufactured exports, volatility of prices obtained for raw material exports, etc. - the study analyses the potential for following an intermediate route. The important issues in the export of semi -processed and wholly processed raw materials are discussed. 111ese issues range from the problems and potentials for the location of processing facilities in the LOCs to the formulation of appropriate policies to encourage an export of processed goods rather than raw materials. Such policies will be useful both in solving the balance of-payments problems of the LDCs and in attaining the goal of the Lima Declaration and Plan of Action on Industrial Development and Co-operation, that called for 2S percent of world industrial production to be located in the LOCs by the year 2000.

Wastewater Treatment Using Marine Algae Biomass as Pollutants Removal

2018 ◽  
Vol 69 (5) ◽  
pp. 1089-1098
Author(s):  
Elena Suzana Biris Dorhoi ◽  
Maria Tofana ◽  
Simona Maria Chis ◽  
Carmen Elena Lupu ◽  
Ticuta Negreanu Pirjol
Keyword(s):  
Wastewater Treatment ◽  
Green Algae ◽  
Marine Algae ◽  
Tap Water ◽  
Ulva Lactuca ◽  
Raw Material ◽  
Bioactive Substances ◽  
Algae Biomass ◽  
Marine Biomass ◽  
Pollutants Removal

The valorification of the marine biomass is an important resource for many industries like pharmaceutical, supplying raw material for the extraction of bioactive substances (vitamins, sterols and collagen), cosmetics, biofertilizers and wastewater treatment. In the last years a special attention has been given to the use of macroalgae. The aim of this study was to emphasize the capacity of two representative green algae species frequent presents on the Romanian shore, Ulva lactuca (L.) and Cladophora vagabunda (L.) Hoek, to remove two usual detergents from wastewater. The green algae washed, dried at room temperature, macerated to powder were introduced into different filter paper for comparison, then immersed in waste water treated with different concentrations of detergents. Tap water was used for the experiment. The results show that Ulva lactuca (L.) species is suitable than Cladophora vagabunda (L.) Hoek species, for wastewater treatment.

scholarly journals Geochemistry and Mineralogy of Ice-Dammed Lake Sediments of the Lębork Deposit

2021 ◽  
Author(s):  
Radosław Rogoziński ◽  
Alina Maciejewska
Keyword(s):  
Chemical Composition ◽  
Lake Sediments ◽  
Inductively Coupled Plasma ◽  
Mineralogical Composition ◽  
Raw Material ◽  
Element Analysis ◽  
X Ray ◽  
Dominant Component ◽  
Clay Deposits ◽  
Dammed Lake

AbstractVarved clay deposits from ice-dammed lakes are a particularly important and broadly applied raw material used for the production of high-quality ceramics (red bricks, roof tiles, etc.), but the mineralogy and geochemistry of these sediments are not fully understood. The aim of the present study was to determine the chemical and mineralogical composition of ice-dammed lake sediments of the Lębork deposit. Major-element analysis of the compositions of selected samples from the ice-dammed lake clays was performed by X-ray fluorescence (XRF) and trace elements were determined by inductively coupled plasma-mass spectrometry. The mineralogical composition of clay samples was determined by X-ray diffraction (XRD). Analyses of the chemical composition of the ice-dammed lake clays of the Lębork deposit showed that the dominant component was SiO2 with a mean content of 56.13 wt.%; the second most abundant component was Al2O3, with a mean content for the entire deposit of 11.61 wt.%. Analysis by ICP-MS indicated the presence of rare earth elements (REE), e.g. cerium, neodymium, lanthanum, and praseodymium; their mean contents are: 56.9, 27.0, 26.3, and 7.3 ppm, respectively. Mineralogical analysis of the varved clays identified quartz, muscovite, calcite, and clay minerals – illite, kaolinite, and montmorillonite. The material filling the Lębork basin is characterized by small lateral and vertical variability in chemical composition. The results of the present study may be of considerable importance in determining the parent igneous, metamorphic, and sedimentary rocks, the weathering products of which supplied material to the ice-dammed lake, as well as in determining the mechanisms and character of the sedimentation process itself.

The Research of Iron Containing Wastes Modification Process of Leninabad Rare Metals Plant

2021 ◽  
Vol 410 ◽  
pp. 778-783
Author(s):  
Pavel V. Matyukhin ◽  
Daler I. Mirzoev
Keyword(s):  
Chemical Composition ◽  
Building Materials ◽  
Raw Material ◽  
Filling Material ◽  
Rare Metals ◽  
X Ray ◽  
Modification Process ◽  
Before And After ◽  
The Republic ◽  
Enrichment Process

The paper presents the results of ferriferous wastes modification process research carried on the basis of JCS “Leninobad rare metals Plant” located in the Republic of Tajikistan. The wastes for the study were taken from the western tailing. The article presents the justification of the chosen wastes as a filling material in the development of new radiation protective composite building materials. The data on the initial ferriferous chemical composition of the tailing wastes and the chemical composition of the material that passed the enrichment process is presented. The study contains microphotos of ferriferous haematite raw material particles surface before and after completing the modifying process. The paper presents and describes the study of X-ray phase analysis diffractograms of enriched iron-containing wastes before and after the modification process. The current research proves that the enrichment ferriferous wastes particles modification process is possible and as a result it can be used as a filling for the development of new kinds of radioprotective composite materials.

Formulation and evaluation of gluten-free cookies from rice and green banana flour

2021 ◽  
Vol 11 (2) ◽  
pp. 720-726
Author(s):  
Maria Yarla parente ◽  
FABIANA LINHARES ◽  
RENATA ALBUQUERQUE COSTA ◽  
MÁRCIA FACUNDO ARAGÃO
Keyword(s):  
Chemical Composition ◽  
Purchase Intention ◽  
Rice Flour ◽  
Raw Material ◽  
Gluten Free ◽  
Autoimmune Pathology ◽  
Nutritional Characteristics ◽  
Banana Flour ◽  
Hedonic Scale ◽  
Green Banana

Celiac disease (CD) is defined as an autoimmune pathology mediated by specific antibodies and is associated with genetic factors, which causes an inflammatory process of the intestinal mucosa in response to gluten ingestion. A study was conducted to evaluate some gluten-free cookie formulations using rice and green banana flour as raw material, and to evaluate the acceptance and chemical composition of the cookies elaborated. Three different cookie formulations were prepared to contain 100% rice flour, 50% rice flour and 50% green banana flour and 100% green banana flour. The following sensory attributes were evaluated: crispness, flavor, and overall impression, using the 9-point hedonic scale and purchase intention using the 5-point structured scale, to check the acceptance of cookies. The chemical composition of the formulation most accepted by sensory analysis was quantified. Sensory evaluation showed that all cookie formulations were accepted; however, the increase of the green banana flour content has resulted in lower acceptance, which may be due to the slightly bitter flavor that green banana flour gives the product. The most accepted cookie formulation had 15.78% protein, 0.80% ash, 4.31% moisture content, 12.35% lipid, and 66.77% carbohydrate. These nutritional characteristics are following Brazilian legislation. Therefore, all cookie formulations have marketing potential, which is very important, especially for people with gluten sensitivity.

IMPACT OF INNOVATIVE METHOD OF PREPARING TOBACCO LEAVES FOR DRYING ON THE BASIC PARAMETERS OF QUALITY OF TOBACCO RAW MATERIAL

2019 ◽  
Author(s):  
Е.Е. Ульянченко
Keyword(s):  
Chemical Composition ◽  
Quality Indicators ◽  
Raw Materials ◽  
Raw Material ◽  
Tobacco Leaves ◽  
Commercial Grade ◽  
Innovative Method ◽  
Main Indicator ◽  
Basic Parameters

Исследовано влияние приема прорезания средней жилки на основные качественные показатели табачного сырья. Исследования проводили на листьях основных сортотипов табака Трапезонд и Остролист по массовым ломкам. Прорезание жилки осуществляли на инновационном оборудовании экспериментальном образце линии подготовки листьев табака к сушке ЛПТС360 (ВНИИТТИ, Краснодар). Качество табачного сырья с прорезанной жилкой определяли по товарным сортам, технологическим и курительным свойствам, химическому составу по методикам лабораторного контроля ВНИИТТИ. Инновационный способ подготовки табака к сушке в едином потоке с применением технологического оборудования, включающего прорезатель, выявил положительный технологический результат. Установлена эффективность приема прорезания средней жилки: срок естественной сушки листьев с прорезанной жилкой сократился в 2,5 раза выход 1го товарного сорта сырья составил 74,60 87,93 выход волокна сырья с прорезанной жилкой превышает минимальное значение технологических норм (75) в 1,15 1,26 раз условный расход сырья на единицу курительных изделий меньше норматива на 6 25 улучшен основной показатель химического состава табачного сырья (число Шмука) в 1,6 4,6 раза у сортотипа Трапезонд, в 1,2 1,5 раза у сортотипа Остролист дегустационные свойства сырья не ухудшились. Инновационный способ подготовки листьев табака к сушке, включающий прием прорезания средней жилки, рекомендуется для применения в производстве табачного сырья. The influence of middle vein cutting method on the main quality indicators of tobacco raw materials is studied. Studies were carried out on the leaves of the main varieties of tobacco Trapezond and Ostrolist, on mass breakdowns. Vein cutting was carried out on the innovative equipment of the line of preparation of tobacco leaves for drying LPTS360 (GNU VNIITTI RAA, Krasnodar). The quality of tobacco raw materials with a cut vein was determined by commercial grades, technological and Smoking properties, chemical composition in accordance with the methods VNIITTI. An innovative method of preparing tobacco for drying in a single stream with the use of technological equipment, including a cutter, revealed a positive technological result. The period of natural drying of leaves with cut veins decreased by 2,5 times. The yield of the 1st commercial grade of raw materials was 74,60 87,93. The output of the fiber raw material with cut vein exceeds the minimum value of technological norms (75) in 1,15 1,26 times. Conditional consumption of raw materials per unit of Smoking products is less than the norm by 6 25. The method of cutting the middle vein of the leaves improves the main indicator in the chemical composition of tobacco raw materials (Schmuck ratio) 1,6 4,6 times in the variety Trapezond and 1,2 1,5 times in the variety Ostrolist. The tasting properties of raw materials have not deteriorated. Analysis of raw material quality indicators showed that the innovative method of cutting the middle vein is effective and recommended for use in the production of tobacco raw materials.

scholarly journals Kaolinite Claystone-Based Geopolymer Materials: Effect of Chemical Composition and Curing Conditions

Minerals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 444 ◽  
Author(s):  
Pavlína Hájková
Keyword(s):  
Chemical Composition ◽  
Water Glass ◽  
Chemical Elements ◽  
Solidification Process ◽  
Ease Of Use ◽  
Raw Material ◽  
Curing Conditions ◽  
Low Viscosity ◽  
Lower Porosity ◽  
Curing Methods

This work describes the role of chemical composition and curing conditions in geopolymer strength, leachability of chemical elements and porosity. The study focuses on geopolymer material prepared from calcined kaolinite claystone, which is not studied frequently as a raw material for geopolymer production, although it has a high application potential as it is easily commercially available and allows preparation of geopolymers with low viscosity. The composition of geopolymers and their curing methods were selected considering their ease of use in the praxis. Therefore, the potassium water glass itself was used as alkali activator without any KOH or NaOH addition. Chemical composition was changed only by the density of water glass in the range of 1.2 to 1.6 g·cm−3. Geopolymers were cured at a temperature within the range of 5 °C–70 °C to speed up the solidification process as well as by microwave radiation. High compressive strengths were obtained for geopolymers with the highest densities of the water glass (1.5 and 1.6 g·cm−3) in dependence on various curing conditions. Higher strengths were achieved in the case of samples where the solidification was not accelerated. The samples cured at lower temperatures (5 °C) showed lower porosity compared to the other curing types. The lowest leachability of Si and alkalis was reached for the samples with water glass density 1.5 g·cm−3.

Sign in / Sign up

Export Citation Format

Share Document