scholarly journals The Effects of Eggplants Illuminated by Red LED (Light Emitting Diode) on the Population Density of the Melon Thrips, Thrips palmi (Thysanoptera: Thripidae)

2015 ◽  
Vol 59 (1) ◽  
pp. 7-9 ◽  
Author(s):  
Manabu Shibao ◽  
Hiroshi Tanaka
2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Myung-Sun Kim ◽  
Yong-Ick Cho ◽  
Min-Suk Kook ◽  
Sang-Chul Jung ◽  
Young-Hyun Hwang ◽  
...  

Light in the red to near-infrared (NIR) range (630–1000 nm), which is generated using low energy laser or light-emitting diode (LED) arrays, was reported to have a range of beneficial biological effects in many injury models. NIR via a LED is a well-accepted therapeutic tool for the treatment of infected, ischemic, and hypoxic wounds as well as other soft tissue injuries in humans and animals. This study examined the effects of exposure to 660 nm red LED light at intensities of 2.5, 5.5, and 8.5 mW/cm2for 5, 10, and 20 min on wound healing and proliferation in fibroblast-like cells, such as L929 mouse fibroblasts and human gingival fibroblasts (HGF-1). A photo illumination-cell culture system was designed to evaluate the cell proliferation and wound healing of fibroblast-like cells exposed to 600 nm LED light. The cell proliferation was evaluated by MTT assay, and a scratched wound assay was performed to assess the rate of migrating cells and the healing effect. Exposure to the 660 nm red LED resulted in an increase in cell proliferation and migration compared to the control, indicating its potential use as a phototherapeutic agent.


2011 ◽  
Vol 04 (01) ◽  
pp. 45-52 ◽  
Author(s):  
GUANGDA LIU ◽  
CHANGE PAN ◽  
KAI LI ◽  
YUAN TAN ◽  
XUNBIN WEI

In this paper, we studied portable blue and red light-emitting-diode (LED) light sources in phototherapy for mild to moderate acne vulgaris to evaluate the efficacy and tolerance of patients. Patients, randomly divided into blue and red groups, received either blue or red LED phototherapy twice a week for four weeks. After complete treatment, the number of lesions reduced by 71.4% in the blue group, in contrast to 19.5% in the red group. No obvious side effects were observed during and one month after the treatment, except for some mild dryness mentioned by several patients.


2021 ◽  
Vol 13 (3) ◽  
pp. 1401
Author(s):  
Iris Gavish ◽  
Abraham Haim ◽  
Doron Kliger

Recently, we have seen energy-efficient light-emitting diode (LED) light bulbs rapidly replace incandescent ones. However, results of new research are indicative of adverse health impacts of LED lighting, which is characterized by enriched blue light. Our study aims to reveal whether using color priming by attaching red/green traffic-light icons on light bulbs influences consumers’ preferences of light bulbs. We conducted a field study simulating the buying process, in which participants (N = 572) were presented with LED and carbon incandescent bulbs. We alternately displayed two pairs of bulbs: (1) in their original packaging and (2) in packages marked with traffic light icons (red = LED). Our results confirm that traffic light icons significantly (p < 0.01) increase the odds of choosing the healthier carbon bulb. The results highlight the benefits of attaching traffic light icons to light bulb packaging, helping consumers to make more health-conscientious purchasing decisions. Nowadays, this study’s contribution is more significant due to COVID-19 restrictions and stay-at-home policies, since people work or study remotely, which increases their exposure to household lighting. These results may incentivize policymakers to enforce adding traffic light icons to light bulb packaging, thus encouraging LED light bulb manufacturers to reduce the blue light component in order to improve the health aspect of their bulbs.


Agronomy ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1654
Author(s):  
Semakaleng Mpai ◽  
Dharini Sivakumar

The ability of light-emitting diode (LED) light treatment to reduce the anthracnose decay via its eliciting effects and thus induce resistance in the avocado (Persea americana), was investigated in this study to replace the current postharvest fungicide treatment. In experiment 1, the effect of blue or red LED lights (6 h per day) on the incidence of anthracnose in artificially inoculated (Colletotrichum gloesposorioides) and naturally infected avocados (cv. Fuerte and Hass) at 12–14 °C (simulated market shelf) for 4, 8, 14, and 16 days was investigated. In experiment 2, the effect of blue or red LED lights on the induced defence mechanism, fruit metabolites, antioxidant activity, and percentage of fruit reaching ready-to-eat stage was determined. Exposure to red LED light significantly reduced the anthracnose decay incidence in naturally infected cv. Fuerte on day 12 and in cv. Hass on day 16 compared to the prochloraz fungicide treatment by upregulating the PAL genes and maintaining the epicatechin content. Blue LED light accelerated the ripening in both cultivars, probably due to reduced D-mannoheptulose content. Red LED light exposure for 6 h per day and 12 days storage showed potential to replace the prochloraz treatment with improved ascorbic acid content and antioxidant activity.


HortScience ◽  
2020 ◽  
Vol 55 (9) ◽  
pp. 1399-1405
Author(s):  
Qinglu Ying ◽  
Yun Kong ◽  
Youbin Zheng

To investigate plant growth and quality responses to different light spectral combinations, cabbage (Brassica oleracea L. var. capitata f. rubra), kale (Brassica napus L. ‘Red Russian’), arugula (Eruca sativa L.), and mustard (Brassica juncea L. ‘Ruby steak’) microgreens were grown in a controlled environment using sole-source light with six different spectra: 1) FL: cool white fluorescent light; 2) BR: 15% blue and 85% red light-emitting diode (LED); 3) BRFRL: 15% blue, 85% red, and 15.5 µmol·m−2·s−1 far-red (FR) LED; 4) BRFRH: 15% blue, 85% red, and 155 µmol·m−2·s−1 FR LED; 5) BGLR: 9% blue, 6% green, and 85% red LED; and 6) BGHR: 5% blue, 10% green, and 85% red LED. For all the light treatments, the total photosynthetic photon flux density (PPFD) was set at ≈330 µmol·m−2·s−1 under a 17-hour photoperiod, and the air temperature was ≈21 °C with 73% relative humidity (RH). At harvest, BR vs. FL increased plant height for all the tested species except arugula, and enlarged cotyledon area for kale and arugula. Adding high-intensity FR light to blue and red light (i.e., BRFRH) further increased plant height for all species, and cotyledon area for mustard, but it did not affect the fresh or dry biomass for any species. Also, BRFRH vs. BR increased cotyledon greenness for green-leafed species (i.e., arugula, cabbage, and kale), and reduced cotyledon redness for red-leafed mustard. However, BGLR, BGHR, and BRFRL, compared with BR, did not affect plant height, cotyledon area, or fresh or dry biomass. These results suggest that the combination of 15% blue and 85% red LED light can potentially replace FL as the sole light source for indoor production of the tested microgreen species. Combining high-intensity FR light, rather than low-level (≤10%) green light, with blue and red light could be taken into consideration for the optimization of LED light spectral quality in microgreen production under environmental conditions similar to this experiment.


Crystals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 335 ◽  
Author(s):  
Wei-Hsiung Tseng ◽  
Diana Juan ◽  
Wei-Cheng Hsiao ◽  
Cheng-Han Chan ◽  
Hsin-Yi Ma ◽  
...  

In this study, our proposed ultraviolet light-emitting diode (UV LED) mosquito-trapping lamp is designed to control diseases brought by insects such as mosquitoes. In order to enable the device to efficiently catch mosquitoes in a wider area, a secondary freeform lens (SFL) is designed for UV LED. The lens is mounted on a 3 W UV LED light bar as a mosquito-trapping lamp of the new UV LED light bar module to achieve axially symmetric light intensity distribution. The special SFL is used to enhance the trapping capabilities of the mosquito-trapping lamp. The results show that when the secondary freeform surface lens is applied to the experimental outdoor UV LED mosquito-trapping lamp, the trapping range can be expanded to 100π·m2 and the captured mosquitoes increased by about 300%.


SIGMA TEKNIKA ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 179
Author(s):  
Muhammad Iirsyam

 AbstrakPada kendaraan bermotor pelumasan adalah suatu hal yang sangat penting. Pelumasan berfungsi untuk melumasi komponen logam atau metal yang bergesekan dalam mesin. Untuk menjaga performa mesin kendaraan tetap prima maka kita harus cermat dalam memilih jenis oli yang akan digunakan menurut tingkat kekentalan oli yang dibutuhkan oleh kendaraan yang kita gunakan. Selain itu pemeriksaan dan pergantian oli secara berkala berperan penting dalam menjaga awetnya mesin kendaraan.Untuk membantu dalam pengecekan oli bagi para pemilik kendaran bermotor dalam hal ini sepeda motor dalam itu peneliti merancang sebuah alat pendeteksi kelayakan oli pada kendaraan sepeda motor. Perubahan nilai resistansi dari sensor IR (Infrared Resistor) setelah menerima pantulan cahaya dari LED (Light Emitting Diode) yang diletakkan diatas permukaan oli menyebabkan tegangan yang diterima Arduino Uno microcontroller ATmega328 membaca perubahan warna oli pada sebuah baki oli sepeda motor. Kata kunci : Pengecekan oli, Pantulan cahaya LED, Arduino Uno   AbstractLubrication in motor vehicles is important, lubrication is not only serves to lubricate metal or metal touching or friction in the machine. To maintain the performance of the vehicle's engine is prime, we must carefully select the type of oil to be used according to the oil viscosity level required by the vehicle we use. In addition, inspection and oil change periodically play an important role in maintaining the vehicle's crew.To assist in oil checking for motorised owners in this motorcycle in this case the author devised an oil feasibility detection tool on a motorcycle vehicle. Changes in resistance value from IR sensor (Infrared Resistor) after receiving light reflection from LED (Light Emitting Diode) that is placed above the oil surface causing the received voltage Arduino Uno Microcontroller ATmega328 Read the changes Oil color on a motorcycle oil tray. Keywords: Oil checking, LED light reflection, Arduino Uno


Foods ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 76 ◽  
Author(s):  
Chang Park ◽  
Nam Kim ◽  
Jong Park ◽  
Sook Lee ◽  
Jong-Won Lee ◽  
...  

In this study, we investigated optimal light conditions for enhancement of the growth and accumulation of glucosinolates and phenolics in the sprouts of canola (Brassica napus L.). We found that the shoot lengths and fresh weights of red light-irradiated sprouts were higher than those of sprouts exposed to white, blue, and blue + red light, whereas root length was not notably different among red, blue, white, and blue + red light treatments. The accumulations of total glucosinolates in plants irradiated with white, blue, and red lights were not significantly different (19.32 ± 0.13, 20.69 ± 0.05, and 20.65 ± 1.70 mg/g dry weight (wt.), respectively). However, sprouts exposed to blue + red light contained the lowest levels of total glucosinolates (17.08 ± 0.28 mg/g dry wt.). The accumulation of total phenolic compounds was the highest in plants irradiated with blue light (3.81 ± 0.08 mg/g dry wt.), 1.33 times higher than the lowest level in plants irradiated with red light (2.87 ± 0.05 mg/g dry wt.). These results demonstrate that red light-emitting diode (LED) light is suitable for sprout growth and that blue LED light is effective in increasing the accumulation of glucosinolates and phenolics in B. napus sprouts.


Sign in / Sign up

Export Citation Format

Share Document