High responsivity photodetector based on monolayer molybdenum disulfide (MoS2)

2016 ◽  
Author(s):  
Tianyou Zhang ◽  
Yujie Chen ◽  
Pengfei Xu ◽  
Zeru Wu ◽  
Yanfeng Zhang ◽  
...  
Keyword(s):  
Molybdenum Disulfide ◽  
High Responsivity

Phenanthroline intercalation into molybdenum disulfide

1996 ◽  
Vol 91 (3-4) ◽  
pp. 307-314 ◽  
Author(s):  
A Golub
Keyword(s):  
Molybdenum Disulfide

Evaluation of a molybdenum sulfide reference electrode in hot alkaline solutions

TAPPI Journal ◽  
2010 ◽  
Vol 9 (7) ◽  
pp. 35-41
Author(s):  
OUTI A. HYÖKYVIRTA ◽  
TOM E. GUSTAFSSON
Keyword(s):  
Molybdenum Disulfide ◽  
Surface Film ◽  
Reference Electrode ◽  
Exposure Period ◽  
Molybdenum Sulfide ◽  
Alkaline Solutions ◽  
Internal Reference ◽  
Cell Potential ◽  
Pulp Digester ◽  
Alkaline Sulfide

This investigation evaluated the applicability of a molybdenum sulfide reference electrode (MSRE) as an internal reference electrode for use in alkaline sulfide solutions over a range of pulp digester liquors at 170°C. The electrode remained stable during the exposure period of two weeks. The experimentally determined half cell potential of the MSRE is E = -0.91 VSHE. The surface of the MSRE was examined by scanning electron microscope (SEM) and electron spectroscopy for chemical analysis (ESCA) to verify the chemical composition of the thin surface film. Based on ESCA studies, the surface film contained molybdenum disulfide and sodium disulfide. During storage of the specimens, sulfide was partly oxidized to sodium sulfite in air. Next to the metallic molybdenum, a mixed molybdenum disulfide and molybdenum hydroxide layer was detected.

scholarly journals In Situ Thermal-Stage Fitted-STEM Characterization of Spherical-Shaped Co/MoS2 Nanoparticles for Conversion of Heavy Crude Oils

Catalysts ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1239
Author(s):  
Manuel Ramos ◽  
Félix Galindo-Hernández ◽  
Brenda Torres ◽  
José Manuel Domínguez-Esquivel ◽  
Martin Heilmaier
Keyword(s):  
Molybdenum Disulfide ◽  
Sodium Molybdate ◽  
Interlayer Spacing ◽  
Scanning Transmission Electron Microscope ◽  
Interplanar Distance ◽  
Scanning Transmission ◽  
Heavy Crude ◽  
C 50 ◽  
Nano Catalysts

We report the thermal stability of spherically shaped cobalt-promoted molybdenum disulfide (Co/MoS2) nano-catalysts from in-situ heating under electron irradiation in the scanning transmission electron microscope (STEM) from room temperature to 550 °C ± 50 °C with aid of Fusion® holder (Protochip©, Inc.). The catalytic nanoparticles were synthesized via a hydrothermal method using sodium molybdate (Na2MoO4·2H2O) with thioacetamide (CH3CSNH2) and cobalt chloride (CoCl2) as promoter agent. The results indicate that the layered molybdenum disulfide structure with interplanar distance of ~0.62 nm remains stable even at temperatures of 550 °C, as observed in STEM mode. Subsequently, the samples were subjected to catalytic tests in a Robinson Mahoney Reactor using 30 g of Heavy Crude Oil (AGT-72) from the golden lane (Mexico’s east coast) at 50 atm using (ultrahigh purity) UHP hydrogen under 1000 rpm stirring at 350 °C for 8 h. It was found that there is no damage on the laminar stacking of Co/MoS2 with temperature, with interlayer spacing remaining at 0.62 nm; these sulfided catalytic materials led to aromatics rise of 22.65% and diminution of asphaltenes and resins by 15.87 and 3.53%, respectively.

The Adsorption of Benzene and Water Vapors by Molybdenum Disulfide

1953 ◽  
Vol 57 (7) ◽  
pp. 653-657 ◽  
Author(s):  
E. V. Ballou ◽  
Sydney Ross
Keyword(s):  
Molybdenum Disulfide ◽  
Water Vapors

scholarly journals Polarization-sensitive photodetectors based on three-dimensional molybdenum disulfide (MoS2) field-effect transistors

Nanophotonics ◽  
2020 ◽  
Vol 9 (16) ◽  
pp. 4719-4728
Author(s):  
Tao Deng ◽  
Shasha Li ◽  
Yuning Li ◽  
Yang Zhang ◽  
Jingye Sun ◽  
...  
Keyword(s):  
Molybdenum Disulfide ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistors ◽  
Three Dimensional ◽  
Polarized Light ◽  
Optical Field ◽  
Two Dimensional ◽  
Polarization Ratio ◽  
Two Dimensional Materials

AbstractThe molybdenum disulfide (MoS2)-based photodetectors are facing two challenges: the insensitivity to polarized light and the low photoresponsivity. Herein, three-dimensional (3D) field-effect transistors (FETs) based on monolayer MoS2 were fabricated by applying a self–rolled-up technique. The unique microtubular structure makes 3D MoS2 FETs become polarization sensitive. Moreover, the microtubular structure not only offers a natural resonant microcavity to enhance the optical field inside but also increases the light-MoS2 interaction area, resulting in a higher photoresponsivity. Photoresponsivities as high as 23.8 and 2.9 A/W at 395 and 660 nm, respectively, and a comparable polarization ratio of 1.64 were obtained. The fabrication technique of the 3D MoS2 FET could be transferred to other two-dimensional materials, which is very promising for high-performance polarization-sensitive optical and optoelectronic applications.

Interfacing perovskite strontium molybdate to molybdenum disulfide nanoplatelts for boosting HER from water

2021 ◽  
Author(s):  
Simonas Ramanavičius ◽  
Carla Bittencourt ◽  
Arnas Naujokaitis ◽  
Vidas Pakštas ◽  
Arunas Jagminas
Keyword(s):  
Molybdenum Disulfide

High-Responsivity Solar-Blind Ultraviolet Photodetectors Based on Carbon Nanodots/Graphene Hybrids

2021 ◽  
Vol 68 (3) ◽  
pp. 1101-1106
Author(s):  
Yong Fang ◽  
Zhiwei Zhao ◽  
Mengru Zhu ◽  
Zhengjin Weng ◽  
Chao Fang ◽  
...  
Keyword(s):  
Carbon Nanodots ◽  
High Responsivity ◽  
Solar Blind ◽  
Ultraviolet Photodetectors
Sign in / Sign up

Export Citation Format

Share Document