scholarly journals EFFECTS OF DEMOLDING AGE ON THE STRENGTH DEVELOPMENT AND THE CARBONATION RESISTANCE OF LOW-HEAT PORTLAND CEMENT FLY ASH SYSTEM MATERIALS, AND NONDESTRUCTIVE EVALUATIONS OF THEIR SURFACE QUALITIES

2010 ◽  
Vol 64 (1) ◽  
pp. 203-210
Author(s):  
Isao KURASHIGE ◽  
Takahiro NISHIDA ◽  
Michihiko HIRONAGA
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Strength Development ◽  
Carbonation Resistance ◽  
Nondestructive Evaluations

scholarly journals Strength Development and Elemental Distribution of Dolomite/Fly Ash Geopolymer Composite under Elevated Temperature

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 1015 ◽  
Author(s):  
Emy Aizat Azimi ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Petrica Vizureanu ◽  
Mohd Arif Anuar Mohd Salleh ◽  
Andrei Victor Sandu ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Fly Ash ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Raw Materials ◽  
Liquid Sodium ◽  
Strength Development ◽  
Elemental Distribution ◽  
Distribution Analysis ◽  
Geopolymer Composites

A geopolymer has been reckoned as a rising technology with huge potential for application across the globe. Dolomite refers to a material that can be used raw in producing geopolymers. Nevertheless, dolomite has slow strength development due to its low reactivity as a geopolymer. In this study, dolomite/fly ash (DFA) geopolymer composites were produced with dolomite, fly ash, sodium hydroxide, and liquid sodium silicate. A compression test was carried out on DFA geopolymers to determine the strength of the composite, while a synchrotron Micro-Xray Fluorescence (Micro-XRF) test was performed to assess the elemental distribution in the geopolymer composite. The temperature applied in this study generated promising properties of DFA geopolymers, especially in strength, which displayed increments up to 74.48 MPa as the optimum value. Heat seemed to enhance the strength development of DFA geopolymer composites. The elemental distribution analysis revealed exceptional outcomes for the composites, particularly exposure up to 400 °C, which signified the homogeneity of the DFA composites. Temperatures exceeding 400 °C accelerated the strength development, thus increasing the strength of the DFA composites. This appears to be unique because the strength of ordinary Portland Cement (OPC) and other geopolymers composed of other raw materials is typically either maintained or decreases due to increased heat.

scholarly journals A Step by Step Methodology for Building Sustainable Cementitious Matrices

2020 ◽  
Vol 10 (8) ◽  
pp. 2955 ◽  
Author(s):  
Styliani Papatzani ◽  
Kevin Paine
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Silica Fume ◽  
Carbon Footprint ◽  
State Of The Art ◽  
Cost Effective ◽  
Strength Development ◽  
Low Carbon ◽  
Current State ◽  
First Time

In an effort to produce cost-effective and environmentally friendly cementitious binders. mainly ternary (Portland cement + limestone + pozzolanas) formulations have been investigated so far. Various proportions of constituents have been suggested, all, however, employing typical Portland cement (PC) substitution rates, as prescribed by the current codes. With the current paper a step by step methodology on developing low carbon footprint binary, ternary and quaternary cementitious binders is presented (PC replacement up to 57%). Best performing binary (60% PC and 40% LS (limestone)) and ternary formulations (60% PC, 20% LS, 20% FA (fly ash) or 43% PC, 20% LS 37% FA) were selected on the grounds of sustainability and strength development and were further optimized with the addition of silica fume. For the first time a protocol for successfully selecting and testing binders was discussed and the combined effect of highly pozzolanic constituents in low PC content formulations was assessed and a number of successful matrices were recommended. The present paper enriched the current state of the art in composite low carbon footprint cementitious binders and can serve as a basis for further enhancements by other researchers in the field.

scholarly journals Effects of Mixing and Curing Temperature on the Strength Development and Pore Structure of Fly Ash Blended Mass Concrete

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Ki-Bong Park ◽  
Takafumi Noguchi
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Pore Structure ◽  
Weather Conditions ◽  
Strength Loss ◽  
Curing Temperature ◽  
Strength Development ◽  
Mass Concrete ◽  
Term Strength

The aim of this work is to know clearly the effects of temperature in response to curing condition, hydration heat, and outside weather conditions on the strength development of high-performance concrete. The concrete walls were designed using three different sizes and three different types of concrete. The experiments were conducted under typical summer and winter weather conditions. Temperature histories at different locations in the walls were recorded and the strength developments of concrete at those locations were measured. The main factors investigated that influence the strength developments of the obtained samples were the bound water contents, the hydration products, and the pore structure. Testing results indicated that the elevated summer temperatures did not affect the early-age strength gain of concrete made using ordinary Portland cement. Strength development was significantly increased at early ages in concrete made using belite-rich Portland cement or with the addition of fly ash. The elevated temperatures resulted in a long-term strength loss in both belite-rich and fly ash containing concrete. The long-term strength loss was caused by a reduction in the degree of hydration and an increase in the total porosity and amount of smaller pores in the material.

scholarly journals Physicochemical Properties of Hydrated Portland Cement Blended with Rice Husk Ash

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Joseph Mwiti Marangu ◽  
Cyprian Muturia M’thiruaine ◽  
Mark Bediako
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Rice Husk ◽  
Elevated Temperatures ◽  
Rice Husk Ash ◽  
Blended Cement ◽  
Strength Development ◽  
Carbonation Depth ◽  
Blended Cements ◽  
Carbonation Resistance

In the presence of significant quantities of carbon dioxide (CO2) and elevated temperatures in the atmosphere due to climate change, cement-based materials are susceptible to carbonation. Blended cements are more prone to carbonation attack than Portland cement. There is a need to evaluate the carbonation resistance of blended cements in a carbonation-prone environment. This paper presents experimental findings obtained from an evaluation of carbonation resistance tests on Rice Husk Ash- (RHA-) blended cement. The blended cement was made by intergrinding of Portland Cement (PC) and RHA to make the test cement (PC-RHA). The RHA dosage in the PC-RHA was varied from 0 to 30% by mass of PC. Pozzolanicity, standard consistency, and setting time tests were conducted on PC-RHA. Mortar prisms measuring 160 mm × 40 mm x 40 mm were separately cast at a water/cement ratio ( w / c ) of 0.50 and 0.60 and cured in water for 2, 7, 14, 28, and 90 days. Compressive strength tests were conducted on the mortar prisms at each of the testing ages. The prepared mortars were also subjected to accelerated carbonation tests in two Relative Humidity (RH) curing regimes, one maintained at an RH greater than 90% and the other between 50–60%. Carbonation resistance of the mixtures was evaluated in terms of the changes in carbonation depth using a phenolphthalein test at the age of 7, 14, 28, and 56 days of curing in a continuous flow of CO2. Compressive strength measurements were also taken during each of the carbonation testing ages. For comparison, similar tests were conducted using commercial PC. The results showed that PC-RHA was pozzolanic while PC was nonpozzolanic. Higher water demand and longer setting times were observed in PC-RHA than in PC. Moreover, there was increased strength development in water-cured samples with increased curing duration. Carbonation results indicated that there was a marked increase in carbonation depth with increased dosage of RHA in PC-RHA binders, increased duration of exposure to CO2, and decreased RH (RH between 50–60%). PC-RHA binders exhibited lower carbonation resistance than PC. In conclusion, for mortars at any w / c ratio, carbonation resistance decreased with increase in RHA dosage and increased w / c ratio.

Hydration and strength development in ternary portland cement blends containing limestone and fly ash or metakaolin

2013 ◽  
Vol 39 ◽  
pp. 93-103 ◽  
Author(s):  
Kirk Vance ◽  
Matthew Aguayo ◽  
Tandre Oey ◽  
Gaurav Sant ◽  
Narayanan Neithalath
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Strength Development

Performances of Belite-Rich Cement Concrete with Fly Ash and Phosphorous Slag Powder

2012 ◽  
Vol 174-177 ◽  
pp. 1502-1506
Author(s):  
Hua Shan Yang ◽  
Sheng Jin Tu ◽  
Yin Long Jin ◽  
Wang Tao
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Outdoor Exposure ◽  
Hydration Heat ◽  
Strength Development ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Slag Powder ◽  
Exposure Site ◽  
Phosphorous Slag

This paper presents the results of laboratory and outdoor exposure site studies on belite-rich cement concrete with phosphorous slag powder and fly ash. The parameters studied included strength, hydration heat, ultimate elongation, Young’s modulus, and adiabatic in temperature. The experimental results showed that belite-rich cement resulted in a higher rate of strength development of mortar and concrete at later ages when compared with that of moderate-heat Portland cement. And the hydration heat of belite-rich cement is lower than that of reference. This is due to the different phase composition of the two cements. Belite-rich cement contains less C3S but more C2S than moderate-heat Portland cement. In addition, belite-rich cement concrete with phosphorous slag powder and fly ash exhibited better performances than those of moderate-heat Portland cement concrete.

Study on Carbonation Resistance of High-Performance Concrete with Large Amount of Fly Ash

2012 ◽  
Vol 476-478 ◽  
pp. 1688-1691 ◽  
Author(s):  
Xue Song Zhang
Keyword(s):  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Strength Development ◽  
Carbonation Depth ◽  
Concrete Carbonation ◽  
Carbonation Resistance ◽  
Development Characteristic ◽  
Compressive Strength Development

Based on the mechanism of concrete carbonation, the effects of content of fly ash in the binder, the water to binder ratios, compound activator, and long-term curing on the carbonation depth of fly ash high-performance concrete are investigated. Experiment results are analyzed and compared with compressive strength development characteristic of fly ash high-performance concrete, and some valuable conclusions are gained.

scholarly journals Influences of Waste Concrete Powder on the Strength Development and Hydration Products of Mortar Containing Fly Ash

2021 ◽  
Author(s):  
Huashan YANG ◽  
Yujun CHE
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Cement Mortar ◽  
Setting Time ◽  
Flow Index ◽  
Strength Development ◽  
Test Results ◽  
Hydration Products ◽  
Waste Concrete ◽  
Time Flow

During recycling waste concrete, a large amount of waste concrete powder (WCP) is generated. However, efficient utilization of WCP remains an unresolved issue. This paper investigates the influences of WCP on the properties and hydration products of cement mortar containing fly ash (FA). This study used two different types of WCPs. One was made from an ordinary Portland cement mortar, and the other was derived from a Portland cement mortar. WCP replaced 10%, 20%, and 30% of FA. The water requirement, setting time, flow index, strength, hydration products, and microstructure of FA mortar incorporating WCP were investigated. Test results indicate that the WCP has no significant influence on the performances and hydration products of FA mortar. By adequately combining WCP and FA, the FA mortar with required performances could be reached.

Sign in / Sign up

Export Citation Format

Share Document