scholarly journals Quantitative and qualitative analysis of sugarcane productivity in function of air temperature and water stress

2019 ◽  
Vol 10 (1) ◽  
pp. 202-212
Author(s):  
Derblai Casaroli ◽  
José Alves Júnior ◽  
Adão Wagner Pêgo Evangelista
Keyword(s):  
Water Deficit ◽  
Accumulation Point ◽  
Thermal Time ◽  
Soluble Solids ◽  
Climate Data ◽  
Degree Days ◽  
Sugarcane Crop ◽  
Lower Productivity ◽  
Sugarcane Productivity

Climate variables can influence the both productivity and quality of the commercial product of sugarcane crop. This study aimed to evaluate the influence of thermal time, negative degree-days and water deficit on productivity and industrial quality of sugarcane for the Goiás Brazilian Savanna region. The data of productivity and industrial quality were obtained in the field (Plant Centro Álcool®) and climate data in the weather station. Thermal time and the accumulation of negative degree-days in cycles showed significant correlations with the yield. The highest (340 mm) and the lowest (158 mm) accumulated water deficit blade not reflected in lower productivity and greater, respectively. Relative evapotranspiration (rET) was equal at 1.0 in more than 50% of the studied period, in which not were found significant correlations between the rET<1 with the productivity and industrial quality. We found significant correlations between rates of degree-days and negative degree-days with productivity rates; however, there was a low correlation between the water deficit rates and productivity. The total recoverable sugars rates and total soluble solids showed maximum accumulation point only in function of degree-day rates. We conclude that the thermal time has greater influence on yield decrease of sugarcane with different harvest cycles, significantly contributing to the accumulation of sugars in the stem.

scholarly journals Jasmonic Acid and K-Phosphite Enhance Productivity and Technological Quality of Sugarcane Crop

2019 ◽  
Vol 11 (14) ◽  
pp. 254
Author(s):  
B. R. A. Moreira ◽  
R. S. Viana ◽  
L. A. M. Lisboa ◽  
P. R. M. Lopes ◽  
P. A. M. Figueiredo ◽  
...  
Keyword(s):  
Jasmonic Acid ◽  
Plant Resistance ◽  
Foliar Application ◽  
Plant Protection ◽  
Water Soluble ◽  
Soluble Solids ◽  
Sugarcane Crop ◽  
Technological Quality ◽  
Resistance Inducers

Plant resistance inducers are cost-effective and environmentally pleasing strategies of plant protection to mitigate biotic and abiotic agents threatening food safety and energy security. We, accordingly, present jasmonic acid and k-phosphite as low-cost strategies to enhance productive yield and technological quality of sugarcane crop. Exogenously treatment of the sugarcane variety &lsquo;SP81-3250&rsquo; consisted of carrying out foliar application of jasmonic acid at 1, 1.5 and 2 ml L-1 and K-phosphite at 2, 4 and 6 ml L-1 before crop flowering. Interestingly, both systemic phytorregulator and foliar fertilizer at the lowest doses significantly improved contents of total soluble solids and sucrose, as well as productive yield of fermentable sugars. Jasmonic acid could promote growth and development by triggering either non-enzymatic or enzymatic mechanisms in the host self-defense system to support of external stresses, including herbivory by sugarcane-borer. K-phosphite could improve crop performance by not only releasing water-soluble inorganic ions like phosphorus and potash, but also by signaling synthesis of phytoalexins. Purity of cane juice and productivity of stalks sharply decreased, as the doses of the plant-resistance inducers increased. Jasmonic acid and k-phosphite at unbalanced endogenous levels could inhibit physiological ripening and specific enzymatical activity of alkaline invertases and sucrose-phosphate synthase, thereby influencing bioavailability of sucrose. The lower the sucrose content, the poorer the technological quality of sugarcane crop. The conclusion is, therefore, jasmonic acid and K-phosphite at lower doses prove to be effective induced resistance techniques to produce richer feedstock, with potential to produce ethanol fuel and refined sugar in sugar-energy plants.

scholarly journals Characteristics of muskmelon fruits in relation to temporary row cover and the number of fruits

2017 ◽  
Vol 35 (4) ◽  
pp. 591-598
Author(s):  
Auderlan M Pereira ◽  
Roberto CF Queiroga ◽  
Francisco Hevilásio F Pereira ◽  
Zaqueu L Silva ◽  
Everaldo F Santos
Keyword(s):  
Experimental Design ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Total Soluble Solids ◽  
Maximum Value ◽  
Lower Productivity ◽  
Fruit Plants ◽  
Cover Up ◽  
Fruit Mass

ABSTRACT The muskmelon plants allow several ways to manipulate sources/drains ratio. The objective of this work was to evaluate characteristics of the productivity and quality of Cantaloupe melon fruits due to the temporary use of row cover and the number of fruits per plant. The experiment was carried out from August to December 2014, at Universidade Federal de Campina Grande (UFCG), Paraiba State, Brazil. The experimental design was randomized blocks with treatments allocated in split plots 5x3, with four replicates. The authors reported permanence time of the row cover at different times in the plot {20, 24, 28, 32, and 36 days after transplanting (DAT)} and, in the subplots, the number of fruits per plant (plants with one fruit, plants with two fruits and fruit-free setting plants). The authors evaluated traits of production and quality of fruits. The permanence time of row cover and number of fruits per plant promoted changes in the productivity and quality of the muskmelon fruits. The permanence of the row cover from 20 to 36 DAT provided reduction in the total soluble solids. The average fruit mass and fruit yield reached the maximum value with the permanence of the row cover up to 26.6 and 25.1 DAT, respectively. Plants with one and two fruits presented higher average fruit mass, but with lower productivity compared to the plant with fruit-free setting.

Quality of Carrots Grown for Processing as Affected by Nitrogen Fertilization and Harvest Term

2009 ◽  
Vol 70 (1) ◽  
pp. 135-144 ◽  
Author(s):  
Marek Gajewski ◽  
Zenon Węglarz ◽  
Anna Sereda ◽  
Marta Bajer ◽  
Agnieszka Kuczkowska ◽  
...  
Keyword(s):  
Nitrogen Fertilization ◽  
Soluble Solids ◽  
Soluble Solids Content ◽  
Carrot Juice ◽  
Harvest Time ◽  
Experimental Station ◽  
Colour Parameters ◽  
Solids Content ◽  
Nitrates Content

Quality of Carrots Grown for Processing as Affected by Nitrogen Fertilization and Harvest TermIn 2007-2008 the effect of nitrogen fertilization and harvest term on quality of two carrot cultivars was investigated. The field experiment was carried out in Żelazna Experimental Station of Warsaw University of Life Sciences. Karotan F1and Trafford F1cultivars, commonly grown for juice industry, were the objects of the experiment. Carrot seeds were sown at the beginning of May. Nitrogen fertilization was applied in five rates, ranged from 0 to 120 kg·ha-1and in two terms — before sowing and in the middle of growing season. Roots were harvested in three terms: mid-September, mid-October and the first decade of November. After harvest there were determined: nitrates (NO3) content in carrot roots and juice, soluble solids, colour parameters of juice in CIE L*a*b*system. The dose and the term of nitrogen fertilization influenced nitrates content in carrots, and the highest NO3concentration was found in carrots fertilized with 120 kg·ha-1of N before sowing. Karotan showed higher nitrates accumulation than Trafford. The content of nitrates in the roots was markedly higher than in carrot juice. Nitrates content in carrots decreased with delaying of harvest time, in opposite to soluble solids content. Soluble solids content and colour parameters of carrot juice were not affected by nitrogen fertilization, but the lowest L*, a*and b*values were observed at the last term of harvest.

scholarly journals Foliar Urea with N-(n-butyl) Thiophosphoric Triamide for Sustainable Yield and Quality of Pineapple in a Controlled Environment

2021 ◽  
Vol 13 (12) ◽  
pp. 6880
Author(s):  
Mohammad Amdadul Haque ◽  
Siti Zaharah Sakimin ◽  
Phebe Ding ◽  
Noraini Md. Jaafar ◽  
Mohd Khanif Yusop ◽  
...  
Keyword(s):  
Nitrogen Loss ◽  
Growth Yield ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Urea Solution ◽  
Urease Inhibitor ◽  
N Losses ◽  
N Accumulation ◽  
Yield And Quality

In agricultural production, nitrogen loss leads to economic loss and is a high environmental risk affecting plant growth, yield, and quality. Use of the N fertilizer with a urease inhibitor is thus necessary to minimize N losses and increase the efficiency of N. This study aimed to evaluate the effects of N-(n-butyl) Thiophosphoric Triamide (NBPT) on the growth, yield, and quality of pineapple. The experiment involved two foliar fertilizer treatments: 1% (w/v) urea solution with NBPT (2.25 mL kg−1 urea) was treated as NLU (NBPT Liquid Urea), and the same concentration of urea without NBPT served as the control. Both were applied 12 times, starting 1 month after planting (MAP) and continuing once a month for 12 months. The application of urea with NBPT notably increased the above-ground dry biomass per plant (20% and 10% at 8 and 12 MAP, respectively), leaf area per plant (23% and 15% at 8 and 12 MAP, respectively), N accumulation per plant (10%), PFPN (Partial Factor Productivity) (13%), and average fruit weight (15%) compared to the treatment with urea alone (control). The analysis of quality parameters indicated that urea with NBPT improves TSS (Total Soluble Solids) (19%), ascorbic acid (10%), and sucrose (14%) but reduces the total organic acid content (21%) in pineapple. When using urea with a urease inhibitor (NBPT), there was a significant improvement in growth, yield, quality, and nitrogen use efficiency, with the additional benefit of reduced nitrogen losses, in combination with easy handling. Hence, urea with a urease inhibitor can be used as a viable alternative for increasing pineapple yield by boosting growth with better fruit quality.

scholarly journals Including Urban Heat Island in Bioclimatic Early-Design Phases: A Simplified Methodology and Sample Applications

2021 ◽  
Vol 13 (11) ◽  
pp. 5918
Author(s):  
Giacomo Chiesa ◽  
Yingyue Li
Keyword(s):  
Urban Heat Island ◽  
Urban Climate ◽  
Temperate Climate ◽  
Heat Island ◽  
Climate Data ◽  
Degree Days ◽  
Climate Conditions ◽  
Early Design ◽  
Correct Definition ◽  
Urban Heat

Urban heat island and urban-driven climate variations are recognized issues and may considerably affect the local climatic potential of free-running technologies. Nevertheless, green design and bioclimatic early-design analyses are generally based on typical rural climate data, without including urban effects. This paper aims to define a simple approach to considering urban shapes and expected effects on local bioclimatic potential indicators to support early-design choices. Furthermore, the proposed approach is based on simplifying urban shapes to simplify analyses in early-design phases. The proposed approach was applied to a sample location (Turin, temperate climate) and five other climate conditions representative of Eurasian climates. The results show that the inclusion of the urban climate dimension considerably reduced rural HDD (heating degree-days) from 10% to 30% and increased CDD (cooling degree-days) from 70% to 95%. The results reveal the importance of including the urban climate dimension in early-design phases, such as building programming in which specific design actions are not yet defined, to support the correct definition of early-design bioclimatic analyses.

scholarly journals The Passive Microwave Neural Network Precipitation Retrieval Algorithm for Climate Applications (PNPR-CLIM): Design and Verification

2021 ◽  
Vol 13 (9) ◽  
pp. 1701
Author(s):  
Leonardo Bagaglini ◽  
Paolo Sanò ◽  
Daniele Casella ◽  
Elsa Cattani ◽  
Giulia Panegrossi
Keyword(s):  
Neural Network ◽  
Passive Microwave ◽  
Retrieval Algorithm ◽  
Climate Data ◽  
High Quality ◽  
Data Record ◽  
Global Precipitation ◽  
Climate Data Record

This paper describes the Passive microwave Neural network Precipitation Retrieval algorithm for climate applications (PNPR-CLIM), developed with funding from the Copernicus Climate Change Service (C3S), implemented by ECMWF on behalf of the European Union. The algorithm has been designed and developed to exploit the two cross-track scanning microwave radiometers, AMSU-B and MHS, towards the creation of a long-term (2000–2017) global precipitation climate data record (CDR) for the ECMWF Climate Data Store (CDS). The algorithm has been trained on an observational dataset built from one year of MHS and GPM-CO Dual-frequency Precipitation Radar (DPR) coincident observations. The dataset includes the Fundamental Climate Data Record (FCDR) of AMSU-B and MHS brightness temperatures, provided by the Fidelity and Uncertainty in Climate data records from Earth Observation (FIDUCEO) project, and the DPR-based surface precipitation rate estimates used as reference. The combined use of high quality, calibrated and harmonized long-term input data (provided by the FIDUCEO microwave brightness temperature Fundamental Climate Data Record) with the exploitation of the potential of neural networks (ability to learn and generalize) has made it possible to limit the use of ancillary model-derived environmental variables, thus reducing the model uncertainties’ influence on the PNPR-CLIM, which could compromise the accuracy of the estimates. The PNPR-CLIM estimated precipitation distribution is in good agreement with independent DPR-based estimates. A multiscale assessment of the algorithm’s performance is presented against high quality regional ground-based radar products and global precipitation datasets. The regional and global three-year (2015–2017) verification analysis shows that, despite the simplicity of the algorithm in terms of input variables and processing performance, the quality of PNPR-CLIM outperforms NASA GPROF in terms of rainfall detection, while in terms of rainfall quantification they are comparable. The global analysis evidences weaknesses at higher latitudes and in the winter at mid latitudes, mainly linked to the poorer quality of the precipitation retrieval in cold/dry conditions.

scholarly journals Quality of Minimally Processed Products Marketed in Cuiabá, Mato Grosso, Brazil

2015 ◽  
Vol 4 (5) ◽  
pp. 157
Author(s):  
Fabíola Gonçalves da COSTA ◽  
Adelino Cunha Neto ◽  
Luiz José Rodrigues ◽  
Eduardo Eustáquio de Souza Figueiredo
Keyword(s):  
Fruits And Vegetables ◽  
Soluble Solids ◽  
Foreign Matter ◽  
Minimally Processed ◽  
Mato Grosso ◽  
Modern Times ◽  
Brazilian Legislation ◽  
Processed Products ◽  
Sanitary Conditions

Consumers have been increasingly seeking healthier foods without sacrificing sensory satisfaction and convenience, which are highly acclaimed attributes in modern times. Minimally processed products can meet these demands. The present study evaluated the microbiological, microscopic and physicochemical quality of minimally processed fruits and vegetables marketed in Cuiabá, Brazil. A total of 36 samples, consisting of sliced melon, fruit salad in pieces, grated carrot, diced melon, sliced papaya and pineapple rounds were subjected to microbiological, microscopic and physicochemical analyses. <em>Salmonella</em> spp. was absent in all samples, while 27.8% (10/36) of the samples showed coliform counts at 45 °C over 2.0 and 2.7 log CFU.g<sup>-1</sup> in fruit and vegetables, respectively. Light dirt and foreign matter were present in 55.5% of the samples (20/36), including wood fragments and insect/animal excrements (rat hair) in 13.9% (5/36) of the samples. The pH and soluble solids (°Brix) results ranged from 3.84 to 6.66 and from 8.19 to 10.24, respectively. The products were in different stages of maturation and 27.8% (10/36) of the sliced papaya and grated carrots were in unsatisfactory sanitary conditions under the current Brazilian legislation.

Relationships between physiological traits and productivity of sugarcane in response to water deficit

2012 ◽  
Vol 152 (1) ◽  
pp. 104-118 ◽  
Author(s):  
M. DE A. SILVA ◽  
J. L. JIFON ◽  
J. A. G. DA SILVA ◽  
C. M. DOS SANTOS ◽  
V. SHARMA
Keyword(s):  
Water Deficit ◽  
Field Studies ◽  
Water Deficit Stress ◽  
Chlorophyll Contents ◽  
Physiological Variables ◽  
Drought Tolerant ◽  
Relative Water ◽  
Leaf Relative Water Content ◽  
Sugarcane Productivity ◽  
Response To Water

SUMMARYThe relationships between physiological variables and sugarcane productivity under water deficit conditions were investigated in field studies during 2005 and 2006 in Weslaco, Texas, USA. A total of 78 genotypes and two commercial varieties were studied, one of which was drought-tolerant (TCP93-4245) and the other drought-sensitive (TCP87-3388). All genotypes were subjected to two irrigation regimes: a control well-watered treatment (wet) and a moderate water-deficit stress (dry) treatment for a period of 90 days. Maximum quantum efficiency of photosystem II (Fv/Fm), estimated chlorophyll content (SPAD index), leaf temperature (LT), leaf relative water content (RWC) and productivity were measured. The productivity of all genotypes was, on average, affected negatively; however, certain genotypes did not suffer significant reduction. Under water deficit, the productivity of the genotypes was positively and significantly correlated with Fv/Fm, SPAD index and RWC, while LT had a negative correlation. These findings suggest that genotypes exhibiting traits of high RWC values, high chlorophyll contents and high photosynthetic radiation use efficiency under low moisture availability should be targeted for selection and variety development in programmes aimed at improving sugarcane for drought prone environments.

ScFT6: A Putative Candidate for Sugarcane Floral Inducer

2021 ◽  
Author(s):  
Manoel Viana Linhares-Neto ◽  
Pedro Vitor Schumacher ◽  
Thales Henrique Cherubino Ribeiro ◽  
Carlos Henrique Cardon ◽  
Pâmela Marinho Resende ◽  
...  
Keyword(s):  
Flowering Time ◽  
Regulatory Networks ◽  
Floral Induction ◽  
Orthologous Gene ◽  
Time Behavior ◽  
Variable Expression ◽  
Binding Protein Gene ◽  
Sugarcane Productivity ◽  
Phosphatidylethanolamine Binding Protein

Abstract One of the factors that can decrease sugarcane productivity is the flowering, because it affects the quantity and quality of feedstock, due to sucrose consumption from the stem during inflorescence emission. Photoperiodicity is the main environmental factor involved in sugarcane floral induction, which occurs by the integration of gene regulatory networks in response to environmental and endogenous stimuli. One of the genes involved in those regulatory networks is the FLOWERING LOCUS T (FT), which is considered a phloem-mobile signal that stimulates floral induction in the shoot apical meristem. This work aimed to identify and characterize homologs of the FT gene in sugarcane, as well as to determine the putative function of these genes during floral induction. From this perspective, we have conducted in silico analyses of putative FT orthologs in sugarcane, as well as the expression levels in different photoperiodic conditions in a 24-hours-day-cycle of ScFT6 in different plant tissues in contrasting cultivars in terms of flowering time. Three new possible FT orthologs were found with high similarity to FT homologs in other species. Among three genes identified, we highlighted ScFT6, which has a conserved domain and amino acids at characteristic positions for the flowering inducer phosphatidylethanolamine-binding protein gene family. Additionally, its expression occurs according to coincidental model, possibly being controlled by the circadian clock. Cultivars with distinct flowering time behavior display variable expression for the ScFT6 gene, suggesting a possible genotypic relationship for its expression. Therefore, sugarcane has at least one putative orthologous gene in relation to FT that promotes floral induction.

Effect of Humic Preparation ‟BIO-Don” on the Content Nutrients in the Soil and the Quality of Cherries

2021 ◽  
pp. 52-58
Author(s):  
Olga S. Bezuglova ◽  
Artem E. Popov ◽  
Marina N. Dubinina ◽  
Pavel N. Skripnikov
Keyword(s):  
Work Experience ◽  
Fruit Trees ◽  
Soluble Solids ◽  
Experimental Site ◽  
Control Option ◽  
Mobile Phosphorus ◽  
Open Ground ◽  
Working Solution ◽  
A Site

The work deals with the study of the influence of humic preparation ‟BIO-Don” on indicators of soil fertility, the enzymatic activity of Сalcic Chernozem (Pachic) at the experimental site, as well as on the productivity and quality of fruit crops, for example, cherries varieties Talisman and Vasilisa in terms of work experience in the open ground in the territory of «Agrofirm “the Red garden”». Treatment of fruit trees was carried out once by drip irrigation in a dosage of 300 l/ha of working solution with a concentration of gp 0.008 g/l for carbon, soil samples were taken before treatment, two weeks and a month after the application of the humic preparation, a site without the use of “BIO-Don” was used as a control option. The treatment of plants with a humic preparation increases the activity of the enzymes catalase, invertase and phosphatase, especially during the period of mass ripening of fruits. Accordingly, at the same time, the content of mobile phosphorus and exchangeable potassium decreases, which is due to the increased removal of these elements by plants. Chemical analysis of fruit products for the content of soluble solids and titrated acidity revealed a statistically significant increase in these indicators in fruits from areas treated with humic preparation, which is manifested by their greater taste saturation.

Sign in / Sign up

Export Citation Format

Share Document