scholarly journals OPTIMIZATION OF BIODIESEL PRODUCTION FROM WASTE FRYING OIL OVER ALUMINA SUPPORTED CHICKEN EGGSHELL CATALYST USING EXPERIMENTAL DESIGN TOOL

2019 ◽  
Vol 59 (1) ◽  
pp. 88-97 ◽  
Author(s):  
Adeyinka S. Yusuff ◽  
Lekan T. Popoola
Keyword(s):  
Reaction Time ◽  
Experimental Design ◽  
Reaction Temperature ◽  
Frying Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Incipient Wetness Impregnation ◽  
Waste Frying Oil ◽  
Percentage Contribution

An optimization of the biodiesel production from a waste frying oil via a heterogeneous transesterification was studied. This present study is also aimed at investigating the catalytic ehaviour of the alumina supported eggshell (ASE) for the synthesis of biodiesel. A synthesized ASE catalyst, at various mixing ratios of alumina to eggshell, was investigated and exhibited a better activity for the reaction when the eggshell and alumina were mixed via incipient wetness impregnation in 2 : 1 proportion on a mass basis and calcined at 900 °C for 4 h. The as-synthesized catalyst was characterized by basicity, BET, SEM, EDX, and FTIR. The 2k factorial experimental design was employed for an optimization of process variables, which include catalyst loading, reaction time, methanol/oil molar ratio and reaction temperature and their effects on the biodiesel yield were studied. The optimization results showed that the reaction time has the highest percentage contribution of 40.139% while the catalyst loading contributes the least to the biodiesel production, as low as 1.233 %. The analysis of variance (ANOVA) revealed a high correlation coefficient (R2 = 0.9492) and the interaction between the reaction time and reaction temperature contributes significantly to the biodiesel production process with percentage contribution of 14.001 %, compared to other interaction terms. The biodiesel yield of 77.56% was obtained under the optimized factor combination of 4.0 wt.% catalyst loading, 120 min reaction time, 12 : 1 methanol/oil molar ratio and reaction temperature of 65 °C. The reusability study showed that the ASE catalyst could be reused for up to four cycles and the biodiesel produced under optimum conditions conformed to the ASTM standard.

Titania-termite hill composite as a heterogeneous catalyst: preparation, characterization, and performance in transesterification of waste frying oil

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Adeyinka S. Yusuff ◽  
Temitayo M. Azeez ◽  
Esther O. Babatunde
Keyword(s):  
Acid Methyl Ester ◽  
Frying Oil ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Incipient Wetness Impregnation ◽  
Waste Frying Oil ◽  
Experimental Conditions ◽  
Catalytic Potential ◽  
And Performance ◽  
Reaction Cycles

AbstractTo reveal the catalytic potential of abandoned naturally occurring material, we synthesized titania-termite hill composite (Ti-THC) via an incipient wetness impregnation route, characterized by various techniques and tested as a catalyst for transesterification of waste frying oil (WFO). The reusability of the prepared catalyst was also studied to evaluate its stability. The effects of reaction process parameters, such as temperature, time, catalyst loading and methanol/WFO molar ratio on fatty acid methyl ester (FAME) yield, were investigated using a central composite design approach. SEM result revealed pores formation on the catalyst surface, while XRD and EDX analyses confirmed successful insertion of titania into the aluminosilicate layer of the termite hill. The maximum FAME yield of 90.78% was obtained at optimum experimental conditions of 71.16 °C reaction temperature, 2.12 h reaction time, 1.03 wt.% catalyst loading and 9.96:1 methanol/WFO molar ratio. The catalyst still maintained its better stability after being reused for three reaction cycles.

scholarly journals Enzymatic Transesterification of Waste Frying Oil from Local Restaurants in East Colombia Using a Combined Lipase System

2020 ◽  
Vol 10 (10) ◽  
pp. 3566
Author(s):  
Mary Angélica Ferreira Vela ◽  
Juan C. Acevedo-Páez ◽  
Nestor Urbina-Suárez ◽  
Yeily Adriana Rangel Basto ◽  
Ángel Darío González-Delgado
Keyword(s):  
Reaction Time ◽  
Methyl Esters ◽  
Enzyme Concentration ◽  
Operating Conditions ◽  
Frying Oil ◽  
Biodiesel Production ◽  
Optimum Operating ◽  
Waste Frying Oil ◽  
Production Chain ◽  
Enzymatic Transesterification

The search for innovation and biotechnological strategies in the biodiesel production chain have become a topic of interest for scientific community owing the importance of renewable energy sources. This work aimed to implement an enzymatic transesterification process to obtain biodiesel from waste frying oil (WFO). The transesterification was performed by varying reaction times (8 h, 12 h and 16 h), enzyme concentrations of lipase XX 25 split (14%, 16% and 18%), pH of reaction media (6, 7 and 8) and reaction temperature (35, 38 and 40 °C) with a fixed alcohol–oil molar ratio of 3:1. The optimum operating conditions were selected to quantify the amount of fatty acid methyl esters (FAMEs) generated. The highest biodiesel production was reached with an enzyme concentration of 14%, reaction time of 8 h, pH of 7 and temperature of 38 °C. It was estimated a FAMEs production of 42.86% for the selected experiment; however, best physicochemical characteristics of biodiesel were achieved with an enzyme concentration of 16% and reaction time of 8 h. Results suggested that enzymatic transesterification process was favorable because the amount of methyl esters obtained was similar to the content of fatty acids in the WFO.

Optimization of Linoleic Acid Monoepoxidation Condition from Malaysian Jatropha curcas Using Central Composite Design (CCD)

2015 ◽  
Vol 754-755 ◽  
pp. 1107-1112
Author(s):  
Rozaini Abdullah ◽  
Jumat Salimon ◽  
Anis Atikah Ahmad
Keyword(s):  
Linoleic Acid ◽  
Reaction Time ◽  
Experimental Design ◽  
Central Composite Design ◽  
Reaction Temperature ◽  
Jatropha Curcas ◽  
Catalyst Loading ◽  
Time Saving ◽  
Independent Variable ◽  
Central Composite

The aim of this study was to optimize the monoepoxidation process of linoleic acid obtained from Malaysian Jatropha curcas oil using central composite design (CCD). There were four independent variable factors had been studied which involved reaction temperature (X1), reaction time (X2), catalyst loading (X3) and H2O2 concentration (X4). Thirty experiments were carried out based on the experimental design responses obtained. The results showed that the optimum condition was obtained at catalyst loading of 0.11% (w/w) methyltrioxorhernium (VII) (MTO), H2O2 mole of 99%, reaction temperature of 58.41oC for 5 hours. The central composite design was proven to be simpler method, time saving and required less samples compared to the conventional method.

Natural Hydroxyapatite (NHAp) Derived from Pork Bone as a Renewable Catalyst for Biodiesel Production via Microwave Irradiation

2015 ◽  
Vol 659 ◽  
pp. 216-220 ◽  
Author(s):  
Achanai Buasri ◽  
Thaweethong Inkaew ◽  
Laorrut Kodephun ◽  
Wipada Yenying ◽  
Vorrada Loryuenyong
Keyword(s):  
Reaction Time ◽  
Microwave Power ◽  
Raw Materials ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Animal Bone ◽  
Natural Hydroxyapatite

The use of waste materials for producing biodiesel via transesterification has been of recent interest. In this study, the pork bone was used as the raw materials for natural hydroxyapatite (NHAp) catalyst. The calcination of animal bone was conducted at 900 °C for 2 h. The raw material and the resulting heterogeneous catalyst were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effects of reaction time, microwave power, methanol/oil molar ratio, catalyst loading and reusability of catalyst were systematically investigated. The optimum conditions, which yielded a conversion of oil of nearly 94%, were reaction time 5 min and microwave power 800 W. The results indicated that the NHAp catalysts derived from pork bone showed good reusability and had high potential to be used as biodiesel production catalysts under microwave-assisted transesterification of Jatropha Curcas oil with methanol.

Hybrid Approach for Optimizing Process Parameters in Biodiesel Production from Palm Oil

2020 ◽  
Vol 834 ◽  
pp. 16-23
Author(s):  
Pongchanun Luangpaiboon ◽  
Pasura Aungkulanon
Keyword(s):  
Reaction Time ◽  
Process Parameters ◽  
Reaction Temperature ◽  
Palm Oil ◽  
Hybrid Approach ◽  
Maximum Yield ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Optimization Approach ◽  
Influential Parameters

Biodiesel was synthesized from direct transesterification of palm oil reacted with methanol in the presence of a suitable catalyst. There is a sequence of three consecutive reversible reactions for the transesterification process. These process parameters were optimized via the hybrid optimization approach of a conventional response surface method and artificial intelligence mechanisms from Sine Cosine and Thermal Exchange Optimization metaheuristics. The influential parameters and their combined interaction effects on the transesterification efficiency were established through a factorial designed experiments. In this study, the influential parameters being optimized to obtain the maximum yield of biodiesel were reaction temperature of 60–150°C, reaction time of 1–6 hours, methanol to oil molar ratio of 6:1–12:1 mol/mol and weight of catalyst of 1–10wt. %. On the first phase, the analysis of variance (ANOVA) revealed the reaction time as the most influential parameter on biodiesel production. Based on the experimental results from the hybrid algorithm via the SCO, it was concluded that the optimal biodiesel yield for the transesterification of palm oil were found to be 100°C for reaction temperature, 4 hours for reaction time, 10:1 wt/wt of ratio methanol to oil and 8% of weight of catalyst with 92.15% and 90.97% of biodiesel yield for expected and experimental values, respectively.

scholarly journals Optimization of Biodiesel Production Using Nanomagnetic CaO-Based Catalysts with Subcritical Methanol Transesterification of Rubber Seed Oil

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 230 ◽  
Author(s):  
Veronica Winoto ◽  
Nuttawan Yoswathana
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Optimum Conditions ◽  
Rubber Seed Oil ◽  
Box Behnken Design ◽  
Rubber Seed

The molar ratio of methanol to rubber seed oil (RSO), catalyst loading, and the reaction time of RSO biodiesel production were optimized in this work. The response surface methodology, using the Box–Behnken design, was analyzed to determine the optimum fatty acid methyl ester (FAME) yield. The performance of various nanomagnetic CaO-based catalysts—KF/CaO-Fe3O4, KF/CaO-Fe3O4-Li (Li additives), and KF/CaO-Fe3O4-Al (Al additives)—were compared. Rubber seed biodiesel was produced via the transesterification process under subcritical methanol conditions with nanomagnetic catalysts. The experimental results indicated that the KF/CaO-Fe3O4-Al nanomagnetic catalyst produced the highest FAME yield of 86.79%. The optimum conditions were a 28:1 molar ratio of methanol to RSO, 1.5 wt % catalyst, and 49 min reaction time. Al additives of KF/CaO-Fe3O4 nanomagnetic catalyst enhanced FAME yield without Al up to 18.17% and shortened the reaction time by up to 11 min.

Biodiesel Production through Direct Transesterification of Waste Cooking Oil with Alcohol via Ultrasonic Wave

2013 ◽  
Vol 389 ◽  
pp. 12-16
Author(s):  
Yong Feng Kang ◽  
Hua Jin Shi ◽  
Lin Ge Yang ◽  
Jun Xia Kang ◽  
Zi Qi Zhao
Keyword(s):  
Reaction Time ◽  
Reaction Temperature ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Ultrasonic Power ◽  
Cooking Oil ◽  
Biodiesel Synthesis ◽  
Optimum Reaction ◽  
Ester Exchange Reaction

Biodiesel is prepared from waste cooking oil and methanol. The ester exchange reaction is conducted under ultrasonic conditions with alkali as the catalysts. Five factors influencing on the transesterification reaction of biodiesel production are discussed in this study, including the reaction time, reaction temperature, catalyst amount, methanol to oil molar ratio, ultrasonic power. A series of laboratory experiments were carried out to test the conversion of biodiesel under various conditions. The process of biodiesel production was optimized by application of orthogonal test obtain the optimum conditions for biodiesel synthesis. The results showed that the optimum reaction conditions were:molar ratio of oil to methanol 8:1,catalysts 1.2g KOH/100g oil,reaction temperature 70°C, reaction time 50 min,Ultrasonic power 400W. The conversion may up to 96.48%.

scholarly journals Optimisation of biodiesel production from dairy effluent scum using calcined egg shell as a transesterification catalyst

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
O. Kuipa ◽  
T. S. Marwizi ◽  
P. K. Kuipa
Keyword(s):  
Reaction Temperature ◽  
Catalyst Concentration ◽  
Statistical Significance ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Dairy Effluent ◽  
High Statistical Significance ◽  
Egg Shell ◽  
Transesterification Catalyst

AbstractThe production of biodiesel from dairy effluent scum using calcined egg shell as the transesterification catalyst has been explored. Eggshell powder was calcined at 900 °C for 3 h and used as catalyst. The influence of methanol-oil molar ratio, catalyst concentration and reaction temperature were studied using Response Surface Methodology employing a Central Composite Rotatable Design. An empirical model that relates the yield of biodiesel to the studied factors was obtained. The model has high statistical significance at 95% confidence interval with R2 and adjusted R2 values of 96.31% and 95.75% respectively. Results showed that among the three studied factors, the methanol-oil molar ratio had the greatest contribution to the yield of dairy effluent scum derived biodiesel followed by reaction temperature and finally, the catalyst concentration. Significant interaction effects were also present between methanol-oil ratio and catalyst, catalyst and reaction temperature and methanol-oil ratio and reaction temperature. Accordingly, the optimal variable settings were 14.355:1 methanol-oil molar ratio, 3.09% catalyst loading by weight of pre-treated dairy scum oil and 55.20°C reaction temperature; with a corresponding yield of 92.72%.

scholarly journals Effect of Process Variables on the Transesterification Process of Palm Oil Sludge to Biodiesel

2019 ◽  
pp. 1-14
Author(s):  
O. A. Aworanti ◽  
A. O. Ajani ◽  
S. E. Agarry ◽  
K. A. Babatunde ◽  
O. D. Akinwunmi
Keyword(s):  
Reaction Time ◽  
Palm Oil ◽  
Research Work ◽  
Acid Value ◽  
Biodiesel Production ◽  
Oil Sludge ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Optimum Process ◽  
Process Variables

In this research work, the optimum process variables (catalyst, methanol to oil ratio and reaction time) for transesterification of palm oil sludge (POS) to biodiesel were studied. The transesterification process was carried by mixture of palm oil sludge, methanol and catalyst with the help of magnetic stirrer at 300 rpm and at temperature of 60ºC. The catalyst used for the process was potassium hydroxide (KOH). One-Factor-at-A-Time was used to select the possible optimum levels of process variable that gives high biodiesel yield. The study was evaluated by five levels  of methanol-to-oil ratio (1:1 – 12:1), catalyst (0.1- 2%) and reaction time (30 – 150 min).The optimum process variables for transesterification of palm oil sludge (POS) to achieved maximum biodiesel yield  were found to be methanol to oil molar ratio of 12:1, catalyst loading of 1.5wt% and reaction time of 30 min. At this optimum conditions the maximum biodiesel yield was 61.2%. The biodiesel produced from transesterification of palm oil sludge was characterized in order to determine the properties of the product. The density of POS is 857.0 kg/m3, kinematic viscosity of 5.38 mm2/s, flash point of 180°C, pour point of -5°C, and Acid value of 0.17 mgKOH/g. The biodiesel produced from transesterification of palm oil sludge meets the EN 14214 and ASTM 6751 standard. Thus, this study will be helpful to determine an efficient and economical procedure for biodiesel production from non-edible raw materials with high free fatty acid.

scholarly journals Kinetics of Biodiesel Synthesis Using Used Frying Oil through Transesterification Reaction

2020 ◽  
Vol 9 (1) ◽  
pp. 1-11
Author(s):  
Agus Haryanto ◽  
Amieria Citra Gita ◽  
Tri Wahyu Saputra ◽  
Mareli Telaumbanua
Keyword(s):  
Reaction Time ◽  
Frying Oil ◽  
Transesterification Reaction ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Order Kinetic ◽  
Used Frying Oil ◽  
First Order ◽  
Biodiesel Synthesis ◽  
Kinetics Of

This research aims to study the first-order kinetics of biodiesel production from used frying oil (UFO) through transesterification with methanol. Used frying oil was collected from fried peddlers around the campus of the University of Lampung. Technical grade methanol and NaOH catalyst were purchased from a local chemical supplier. The experiment was carried out with 100 ml of UFO at various combinations of oil to methanol molar ratio (1:4, 1:5, and 1:6), reaction temperatures(30 to 55oC, the ramping temperature of 5o C), and reaction time of 0.25 to 10 minutes. First-order kinetic was employed using 126 data pairs (87.5%). The acquired kinetic model was validated using 18 data sets (12.5%) observed at a reaction time of eight min. Results show that biodiesel yield was increased with reaction time, its molar ratio, and temperature. The maximum return of 78.44% was achieved at 55oC and molar ratio of 1:6. The kinetic analysis obtains the reaction rate constant (k) in the range of 0.045 to 0.130. The value of k increases with the reaction temperature and molar ratio. The analysis also reveals the average activation energy (Ea) of the UFO transesterification reaction with methanol and NaOH catalyst to be 21.59 kJ/mol. First-order kinetic is suitable to predict biodiesel yield from UFO because of low %RMSE (3.39%) and high R2 (0.8454

Sign in / Sign up

Export Citation Format

Share Document