MOBILE PROCESSING OF ASSEMBLY ELEMENTS OF HIGHWAYS

2019 ◽  
pp. 40-44
Author(s):  
S. V. Safonov ◽  
V. P. Smolentsev ◽  
Ya. S. Smolentseva
Keyword(s):  
Current Source ◽  
Hydraulic Systems ◽  
Power Sources ◽  
Working Medium ◽  
Main Pipelines ◽  
Great Pressure ◽  
Service Environments ◽  
The Cost ◽  
Processing Techniques

The issues of preparation of connecting elements of pipelines during repair and restoration of highways in the field with a limited number of technological equipment are considered. It is shown that the replacement of traditional methods of processing on the combined types of preparation of the replaced sections of the highways for welding can improve the accuracy of the mating elements, eliminate the appearance of burrs at the junction of parts. This reduces the need for subsequent technological impacts, improves the quality of repair, provides tightness of highways, reduces the cost of operation and the period of restoration of the highways. Justified the field of rational use of combined processing techniques in the Assembly of parts after repair of main pipelines with account of operations in the field or during pre-flight tests on polygons. Here the greatest advantages are gained by the electrocontact method of separation of materials. Which does not require new power sources electric shock can be applied using as a working medium available technical water. Application of electrocontact processing method of connecting nodes on the proposed schemes ensures safe operation at low voltages the current source gives the possibility, without the complexity of mobile means of providing repairs quickly to restore the product to eliminate the causes of abnormal situations in the construction and operation of highways hydraulic systems of transport vehicles, especially in the case of use in service environments under great pressure.

scholarly journals Modeling and calculation of hydromechanical systems dynamics based on the volume rigidity theory

2018 ◽  
Vol 226 ◽  
pp. 01001 ◽  
Author(s):  
Alexander T. Rybak ◽  
Mikhail P. Shishkarev ◽  
Alexander A. Demyanov ◽  
Viktor P. Zharov
Keyword(s):  
Numerical Experiment ◽  
Hydraulic System ◽  
Shock Absorber ◽  
Rigidity Theory ◽  
Hydraulic Systems ◽  
Functional Parameters ◽  
Working Medium ◽  
Drive Systems ◽  
Volume Rigidity

A method for modeling hydraulic systems of hydromechanical devices based on the application of the volume rigidity theory - the property of the hydraulic system to keep its volume unchanged when the pressure of the working medium changes is proposed. The main analytical dependencies intended for modeling the hydraulic system are presented. An example of simulation and calculation of a hydromechanical shock absorber system which confirms the correctness and convenience of using the volume rigidity theory in modeling hydromechanical drive systems of complex machines is presented. The results of the numerical experiment make it possible to evaluate the functioning quality of the drive system under investigation to reveal the effect of the main design and system functional parameters on its operation. The graphs of the change in the main functional parameters of the shock absorber under investigation in real time are given, which make it possible to visually evaluate the results of a numerical experiment and draw conclusions about the need for modernization.

scholarly journals Mobile Processing of Pipeline Assembly Units

2019 ◽  
Vol 297 ◽  
pp. 02008
Author(s):  
Sergey Safonov ◽  
Vladislav Smolentsev ◽  
Yana Smolentseva
Keyword(s):  
High Pressure ◽  
Contact Method ◽  
Technological Equipment ◽  
Electric Contact ◽  
Hydraulic Systems ◽  
Emergency Situations ◽  
Traditional Processing ◽  
The Cost ◽  
Limited Scope

The paper addresses the issues, related to the preparation of pipeline docking elements during the repair and recovery of pipelines in field conditions with a limited scope of technological equipment. It has been shown that the replacement of traditional processing methods by combined types of preparation of replaceable pipeline sections for welding can improve the accuracy of mating elements, preventing the occurrence of burrs at the joint. This enhances the quality of repair, ensures the tightness of pipelines, reduces the cost of operation and the period of pipeline recovery. The application of the electric-contact method of processing assembly units, based on the proposed schemes, makes it possible, without sophistication of mobile servicing means, to timely restore the performance of products, eliminating the causes of emergency situations in construction and during operation of pipelines in hydraulic systems of transport machines, especially when used under operation in high-pressure media.

Pengaruh Kompetensi Coder terhadap Keakuratan dan Ketepatan Pengkodean Menggunakan ICD 10 di Rumah Sakit X Pekanbaru Tahun 2016

2018 ◽  
Vol 1 (1) ◽  
pp. 31-43
Author(s):  
Nur Maimun ◽  
Jihan Natassa ◽  
Wen Via Trisna ◽  
Yeye Supriatin
Keyword(s):  
Medical Record ◽  
Human Error ◽  
Medical Personnel ◽  
Quality Of Data ◽  
Accuracy And Precision ◽  
Result Show ◽  
Study Implementation ◽  
Icd 10 ◽  
The Cost

The accuracy in administering the diagnosis code was the important matter for medical recorder, quality of data was the most important thing for health information management of medical recorder. This study aims to know the coder competency for accuracy and precision of using ICD 10 at X Hospital in Pekanbaru. This study was a qualitative method with case study implementation from five informan. The result show that medical personnel (doctor) have never received a training about coding, doctors writing that hard and difficult to read, failure for making diagnoses code or procedures, doctor used an usual abbreviations that are not standard, theres still an officer who are not understand about the nomenclature and mastering anatomy phatology, facilities and infrastructure were supported for accuracy and precision of the existing code. The errors of coding always happen because there is a human error. The accuracy and precision in coding very influence against the cost of INA CBGs, medical and the committee did most of the work in the case of severity level III, while medical record had a role in monitoring or evaluation of coding implementation. If there are resumes that is not clearly case mix team check file needed medical record the result the diagnoses or coding for conformity. Keywords: coder competency, accuracy and precision of coding, ICD 10

ABOUT NECESSITY OF MATHEMATICAL MODELING OF THE BUSINESS PROCESS OF COST ESTIMATE CALCULATIONS IN THE CONSTRUCTION OF OIL AND GAS FACILITIES

2017 ◽  
pp. 139-145
Author(s):  
R. I. Hamidullin ◽  
L. B. Senkevich
Keyword(s):  
Mathematical Modeling ◽  
Quality Assessment ◽  
Business Process ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Construction Organizations ◽  
The Cost ◽  
Cost Of Construction

A study of the quality of the development of estimate documentation on the cost of construction at all stages of the implementation of large projects in the oil and gas industry is conducted. The main problems that arise in construction organizations are indicated. The analysis of the choice of the perfect methodology of mathematical modeling of the investigated business process for improving the activity of budget calculations, conducting quality assessment of estimates and criteria for automation of design estimates is performed.

Return on Invesment (ROI) of Software Product: A Systematic Literature Review

2015 ◽  
Vol 6 (1) ◽  
pp. 50-57
Author(s):  
Rizqa Raaiqa Bintana ◽  
Putri Aisyiyah Rakhma Devi ◽  
Umi Laili Yuhana
Keyword(s):  
Return On Investment ◽  
Assessment Criteria ◽  
Software Product ◽  
And Performance ◽  
Rational Consideration ◽  
Actual Return ◽  
The Cost ◽  
Investment Models ◽  
The Impact

The quality of the software can be measured by its return on investment. Factors which may affect the return on investment (ROI) is the tangible factors (such as the cost) dan intangible factors (such as the impact of software to the users or stakeholder). The factor of the software itself are assessed through reviewing, testing, process audit, and performance of software. This paper discusses the consideration of return on investment (ROI) assessment criteria derived from the software and its users. These criteria indicate that the approach may support a rational consideration of all relevant criteria when evaluating software, and shows examples of actual return on investment models. Conducted an analysis of the assessment criteria that affect the return on investment if these criteria have a disproportionate effort that resulted in a return on investment of a software decreased. Index Terms - Assessment criteria, Quality assurance, Return on Investment, Software product

Impact of Raw Materials and Processing Techniques on The Microbiological Quality of Egyptian Domiati Cheese

2020 ◽  
Keyword(s):  
Raw Materials ◽  
Microbiological Quality ◽  
Raw Milk ◽  
Plate Count ◽  
E Coli ◽  
Fresh Cheese ◽  
Processing Techniques ◽  
The Impact ◽  
Total Yeast

Domiati cheese is the most popular brand of cheese ripened in brine in the Middle East in terms of consumed quantities. This study was performed to investigate the impact of the microbiological quality of the used raw materials, the applied traditional processing techniques and ripening period on the quality and safety of the produced cheese. Three hundred random composite samples were collected from three factories at Fayoum Governorate, Egypt. Collected samples represent twenty-five each of: raw milk, table salt, calf rennet, microbial rennet, water, environmental air, whey, fresh cheese, ripened cheese & swabs from: worker hands; cheese molds and utensils; tanks. All samples were examined microbiologically for Standard Plate Count (SPC), coliforms count, Staphylococcus aureus (S. aureus) count, total yeast & mould count, presence of E. coli, Salmonellae and Listeria monocytogenes (L. monocytogenes). The mean value of SPC, coliforms, S. aureus and total yeast & mould counts ranged from (79×102 CFU/m3 for air to 13×108 CFU/g for fresh cheese), (7×102 MPN/ cm2 for tank swabs to 80×106 MPN/ml for raw milk), (9×102 CFU/g for salt to 69×106 CFU/g for fresh cheese) and (2×102 CFU/cm2 for hand swabs to 60×104 CFU/g for fresh cheese), respectively. Whereas, E. coli, Salmonella and L. monocytogenes failed to be detected in all examined samples. There were significant differences in all determined microbiological parameters (p ≤0.05) between fresh and ripened cheese which may be attributed to different adverse conditions such as water activity, pH, salt content and temperature carried out to improve the quality of the product.

Strategy for Protecting the North Sea: A Chemical Industry Perspective

1991 ◽  
Vol 24 (10) ◽  
pp. 269-276
Author(s):  
J. R. Lawrence ◽  
N. C. D. Craig
Keyword(s):  
North Sea ◽  
Chemical Industry ◽  
Important Research ◽  
The Public ◽  
The North ◽  
Anthropogenic Inputs ◽  
Seven Principles ◽  
The North Sea ◽  
The Cost

The public has ever-rising expectations for the environmental quality of the North Sea and hence of everreducing anthropogenic inputs; by implication society must be willing to accept the cost of reduced contamination. The chemical industry accepts that it has an important part to play in meeting these expectations, but it is essential that proper scientific consideration is given to the potential transfer of contamination from one medium to another before changes are made. A strategy for North Sea protection is put forward as a set of seven principles that must govern the management decisions that are made. Some areas of uncertainty are identified as important research targets. It is concluded that although there have been many improvements over the last two decades, there is more to be done. A systematic and less emotive approach is required to continue the improvement process.

New Monitoring Strategy for the Quality Control in the Processing Practice of Scutellariae Radix

2020 ◽  
Vol 16 (3) ◽  
pp. 303-311
Author(s):  
Qi Huang ◽  
Chunsong Cheng ◽  
Lili Li ◽  
Daiyin Peng ◽  
Cun Zhang
Keyword(s):  
Quality Control ◽  
Monitoring Strategy ◽  
Scutellariae Radix ◽  
Chromatographic Fingerprints ◽  
New Strategy ◽  
Processed Products ◽  
Main Components ◽  
Processing Techniques ◽  
Multivariate Monitoring

Background: Scutellariae Radix (Huangqin) is commonly processed into 3 products for different clinical applications. However, a simple analytical method for quality control has rarely been reported to quickly estimate the degree of processing Huangqin or distinguish differently processed products or unqualified Huangqin products. Objective: To study a new strategy for quality control in the processing practice of Huangqin. Methods: Seven kinds of flavonoids that mainly exist in Huangqin were determined by HPLC-DAD. Chromatographic fingerprints were established to study the variation and discipline of the 3 processed products of Huangqin. PCA and OPLS-DA were used to classify differently processed products of Huangqin. Results: The results showed that baicalin and wogonoside were the main components in the crude and the alcohol Huangqin herb while baicalein and wogonin mainly existed in carbonized Huangqin. The results of mathematical statistics revealed that the processing techniques can make the quality of medicinal materials more uniform. Conclusion: This multivariate monitoring strategy is suitable for quality control in the processing of Huangqin.

Effects and Risks of Distance Learning in Higher Education

2020 ◽  
pp. 61-73
Author(s):  
Yu. M. Tsygalov
Keyword(s):  
Higher Education ◽  
Distance Learning ◽  
Online Education ◽  
New Technology ◽  
Negative Consequences ◽  
Higher Education System ◽  
First Results ◽  
Spread Of Infection ◽  
The Cost

The forced work of Russian universities remotely in the context of the pandemic (COVID-19) has generated a lot of discussion about the benefits of the new form of education. The first results were summed up and reports were presented, the materials of which showed that the main goal of online education — the prevention of the spread of infection, - has been achieved. Against this background, proposals and publications have appeared substantiating the effectiveness of the massive introduction of distance learning in Russia, including in higher education. However, the assessment of such training by the population and students in publications and in social networks was predominantly negative and showed that the number of emerging problems exceeds the possible benefits of the new educational technology. Based on the analysis of the materials of publications and personal experience of teaching online, the potential benefits and problems of distance learning in higher education in Russia are considered. It is proposed to consider the effects separately for the suppliers of new technology (government, universities) and consumers (students, teachers, society). It is substantiated that the massive introduction of online education allows not only to reduce the negative consequences of epidemics, but also to reduce budgetary funding for universities, optimize the age composition of teachers, and reduce the cost of maintaining educational buildings. However, there will be a leveling / averaging of the quality of education, and responsibility for the quality of training will shift from the state/universities to students. The critical shortcomings of online education are the low degree of readiness of the digital infrastructure, the lack of a mechanism for identifying and monitoring the work of students, information security problems, and the lack of trust in such training of the population. The massive use of online education creates a number of risks for the country, the most critical of which is the destruction of the higher education system and a drop in the effectiveness of personnel training. The consequences of this risk realization are not compensated by any possible budget savings.

Sign in / Sign up

Export Citation Format

Share Document