scholarly journals Program Keselamatan dan Kesehatan Kerja Di Laboratorium Pendidikan

2020 ◽  
Vol 2 (1) ◽  
pp. 35-40
Author(s):  
Dwi Cahyaningrum
Keyword(s):  
Occupational Safety ◽  
Occupational Safety And Health ◽  
Health Programs ◽  
Physical Chemical ◽  
Safety And Health ◽  
Workplace Accidents ◽  
Financial Losses

The laboratory is a workplace that has potential hazards both physical, chemical, biological, and ergonomic hazards. Potential hazards in educational laboratories are considered lower than in industrial laboratories because they use relatively smaller amounts of material. This results in financial losses, injuries and damage to equipment and infrastructure. Some theories state that accidents that occur at work are the result of mistakes from humans and management. This paper discusses how to arrange and implement Occupational Safety and Health programs in educational laboratories so that potential hazards can be controlled and minimize workplace accidents.

scholarly journals Work Safety and Health Principles (K3) in the Design of Workshop Center of Artificial Natural Stone in Gianyar, Bali

2017 ◽  
Vol 1 (2) ◽  
pp. 10
Author(s):  
A. A. Gde Dwika Digjaya Putra ◽  
I Nyoman Widya Paramadhyaksa ◽  
Ida Bagus Ngurah Bupala
Keyword(s):  
Production Process ◽  
Occupational Safety ◽  
Occupational Safety And Health ◽  
Natural Stone ◽  
Stone Materials ◽  
Safety And Health ◽  
Sense Of Security ◽  
Workplace Accidents ◽  
Index Terms ◽  
Natural Stones

The embodiment of Balinese buildings is known to be synonymous with the use of natural stone materials which are exposed in such a way and not given additional dyes/coatings. The material used is usually in the form of bricks and sandstone. The center of the natural stone craftsman is a location of concentration of craftsmen who produce hand-crafted natural stone. The artificial natural stone craftsman center has a workshop used by artisans to produce crafts. In the production process, there is certainly a risk of workplace accidents that can be experienced by craftsmen. At the center must implement occupational safety and health to provide a sense of security and comfort in work. There are many work accidents caused by human factors, workplace accidents must be avoided so that the production of crafts can run smoothly. The risk of workplace accidents that can occur in craftsmen centers in the form of being injured by sharp objects, being hit by a hammer, or falling. The health of craftsmen is also an important factor in the production of artificial natural stones. Healthy craftsmen will be able to work productively and produce good quality craft items. The application of occupational safety and health is expected to be a solution in reducing the risk of workplace accidents that can occur in the production process. Index Terms— centers, craftsmen, accidents, health.

scholarly journals EVALUASI KESELAMATAN DAN KESEHATAN KERJA PADA PRAKTIKUM PERANCANGAN TEKNIK INDUSTRI II MENGGUNAKAN METODE JOB SAFETY ANALYSIS

2019 ◽  
Vol 14 (1) ◽  
pp. 11
Author(s):  
Rina Sulistiyowati ◽  
Bambang Suhardi ◽  
Eko Pujiyanto
Keyword(s):  
Engineering Design ◽  
Occupational Safety ◽  
Safety Analysis ◽  
Occupational Safety And Health ◽  
Industrial Engineering ◽  
Risk Level ◽  
Analysis Method ◽  
Safety And Health ◽  
Workplace Accidents ◽  
Job Safety

Praktikum Perancangan Teknik Industri II(PPTI II) merupakan bagian dari praktikum terintegrasi di Program Studi Teknik Industri UNS yang melakukan kegiatan manufakturdaribahan baku sampai menjadi produk. Prosesmanufaktur menggunakanmesin yang menimbulkan suara bising yang belum sesuai dengan Keselamatan dan Kesehatan Kerja(K3).Penelitian ini bertujuan untuk mengevaluasiK3 pada PPTI IIuntuk mengantisipasi terjadi kecelakaan kerja. Analisis K3menggunakan metode Job Safety Analysis(JSA)denganmengidentifikasi dan menganalisis potensi risiko kecelakaan kerja. Metode penelitian ini dilakukan dengan pengukuran kebisingan dan suhuserta melakukan wawancara terstruktur kepada praktikan. Pengukuran yang dilakukan adalah pengukuran kebisingan dan suhu dalam laboratorium dan untuk memperkuat hasil pengukuran dilakukan wawancara terstruktur terhadap 20 praktikan dari total praktikan yang berjumlah 71 mahasiswakemudian melakukan analisis menggunakan JSA. Hasil penilaian tingkat risikodiketahui bahwa 66,67% potensi risiko paling tinggi adalah karena kebisingan diatas Nilai Ambang Batas. Abstract [Title:Work Safety and Health Evaluation on Industrial Engineering Design Practicum II using Job Safety Analysis Method]Industrial Engineering Design Practicum II (IEDP II) is part of an integrated practicum in the UNS Industrial Engineering Study Program that carry out manufacturing activities from raw materials to products. The manufacturing process usesmachines that cause noise that are not in accordance with Occupational Safety and Health (OHS). This study consisted to evaluate OHS in IEDP II to anticipate workplace accidents. OHS analysis uses the Job Safety Analysis Method by identifying and analyzingthe potential risk of workplace accidents. The method of this research is carried out by measuring noise and temperature and conducting structured interviews with practitioners.Measurements made were measurements of noise and temperature in the laboratory and to strengthen the results of measurements conducted structuredinterviews of 20 practitioners from a total of 71 students who then analyzed using JSA. The results of the risk level assessment revealed that 66.67% of the highest risk potential was due to noise.Keywords:JobSafety Analysis;Occupational Safety and Health; Industrial Engineering Design Practicum II

The Occupational Safety and Health Act of 1970

1972 ◽  
Author(s):  
Theodore F. Schoenborn
Keyword(s):  
United States ◽  
Coal Mine ◽  
Occupational Safety ◽  
Health And Safety ◽  
The United States ◽  
Occupational Safety And Health ◽  
Health Programs ◽  
Safety And Health ◽  
Health Laws ◽  
Mine Health And Safety

It is a pleasure to be here today to speak to you about the Occupational Safety and Health Act of 1970, which is landmark legislation by any measure applied to it. The Act applies to every employer affecting commerce in the United States and its territories which was not covered by other Federal occupational safety and health laws, such as the Metal and Non-metallic Mine Act, the Federal Coal Mine Health and Safety Act and the Atomic Energy Act of 1954. By 1973 a study is to be completed containing recommendations for combining all Federal occupational safety and health programs. Paper published with permission.

scholarly journals Results of the Workplace Health in America Survey

2019 ◽  
Vol 33 (5) ◽  
pp. 652-665 ◽  
Author(s):  
Laura A. Linnan ◽  
Laurie Cluff ◽  
Jason E. Lang ◽  
Michael Penne ◽  
Maija S. Leff
Keyword(s):  
Health Promotion ◽  
Occupational Safety ◽  
Workplace Health Promotion ◽  
Occupational Safety And Health ◽  
Self Report ◽  
Health Programs ◽  
Workplace Health ◽  
Cross Sectional ◽  
Safety And Health ◽  
Comprehensive Programs

Purpose: To provide a nationally representative snapshot of workplace health promotion (WHP) and protection practices among United States worksites. Design: Cross-sectional, self-report Workplace Health in America (WHA) Survey between November 2016 and September 2017. Setting: National. Participants: Random sample of US worksites with ≥10 employees, stratified by region, size, and North American Industrial Classification System sector. Measures: Workplace health promotion programs, program administration, evidence-based strategies, health screenings, disease management, incentives, work–life policies, implementation barriers, and occupational safety and health (OSH). Analysis: Descriptive statistics, t tests, and logistic regression. Results: Among eligible worksites, 10.1% (n = 3109) responded, 2843 retained in final sample, and 46.1% offered some type of WHP program. The proportion of comparable worksites with comprehensive programs (as defined in Healthy People 2010) rose from 6.9% in 2004 to 17.1% in 2017 ( P < .001). Occupational safety and health programs were more prevalent than WHP programs, and 83.5% of all worksites had an individual responsible for employee safety, while only 72.2% of those with a WHP program had an individual responsible for it. Smaller worksites were less likely than larger to offer most programs. Conclusion: The prevalence of WHP programs has increased but remains low across most health programs; few worksites have comprehensive programs. Smaller worksites have persistent deficits and require targeted approaches; integrated OSH and WHP efforts may help. Ongoing monitoring using the WHA Survey benchmarks OSH and WHP in US worksites, updates estimates from previous surveys, and identifies gaps in research and practice.

scholarly journals Degree of Integration Between Occupational Safety and Health Programs and Wellness Programs

2019 ◽  
Vol 61 (9) ◽  
pp. 704-717
Author(s):  
Alysha R. Meyers ◽  
Ibraheem S. Al-Tarawneh ◽  
P. Timothy Bushnell ◽  
Steven J. Wurzelbacher ◽  
Michael P. Lampl ◽  
...  
Keyword(s):  
Occupational Safety ◽  
Wellness Programs ◽  
Occupational Safety And Health ◽  
Health Programs ◽  
Safety And Health

scholarly journals Juridical Analysis of the Occupational Safety and Health Management System in the Company

2020 ◽  
Vol 3 (2) ◽  
pp. 895-901
Author(s):  
Jaminuddin Marbun
Keyword(s):  
Management System ◽  
Occupational Safety ◽  
Health Management ◽  
Occupational Safety And Health ◽  
Health It ◽  
Employment Relationships ◽  
Safety And Health ◽  
Workplace Accidents ◽  
The Government ◽  
Almost All

Whatever we do almost all have risks if we are not careful about doing it. Some risks are small and some are large depending on the type of work to be performed. The threat of risk that will occur in this case is the risk of occupational safety and health that cannot be predicted when the event will occur which is clear that each worker must be careful to carry out their work. To overcome the risk of accidents and occupational health it is necessary to hold various efforts by the government, employers and workers to foster norms of protection for workers in accordance with industrial and technological advancements in the company. In order to anticipate workplace accidents in the company, one way is to implement an Occupational Safety and Health Management System that is united with the company's management so that employers can implement fully the protection of workers in employment relationships at the company.

Sign in / Sign up

Export Citation Format

Share Document