scholarly journals The influence of geometric imperfections on the stability of three-layer beams with foam core

2017 ◽  
Vol 37 (1) ◽  
pp. 65-69 ◽  
Author(s):  
Iwona Wstawska
Keyword(s):  
Metal Foam ◽  
Plastic Material ◽  
Local Buckling ◽  
Foam Core ◽  
Pure Bending ◽  
Geometric Imperfections ◽  
The Core ◽  
Analysis Of Stability ◽  
Elastic Plastic Material ◽  
The Stability

Abstract The main objective of this work is the numerical analysis (FE analysis) of stability of three-layer beams with metal foam core (alumina foam core). The beams were subjected to pure bending. The analysis of the local buckling was performed. Furthermore, the influence of geometric parameters of the beam and material properties of the core (linear and non-linear model) on critical loads values and buckling shape were also investigated. The calculations were made on a family of beams with different mechanical properties of the core (elastic and elastic-plastic material). In addition, the influence of geometric imperfections on deflection and normal stress values of the core and the faces has been evaluated.

Global and local buckling of sandwich circular and beam-rectangular plates with metal foam core

2012 ◽  
Vol 61 ◽  
pp. 154-161 ◽  
Author(s):  
P. Jasion ◽  
E. Magnucka-Blandzi ◽  
W. Szyc ◽  
K. Magnucki
Keyword(s):  
Metal Foam ◽  
Local Buckling ◽  
Foam Core ◽  
Rectangular Plates ◽  
Global And Local

scholarly journals Numerical analysis of stability of the stiffened plates subjected aliquant critical loads

2020 ◽  
Vol 16 (1) ◽  
pp. 54-61
Author(s):  
Gaik A. Manuylov ◽  
Sergey B. Kositsyn ◽  
Irina E. Grudtsyna
Keyword(s):  
Numerical Analysis ◽  
Critical Loads ◽  
Geometric Nonlinearity ◽  
Compressive Load ◽  
Stiffened Plates ◽  
Geometric Imperfections ◽  
Initial Geometric Imperfections ◽  
Analysis Of Stability ◽  
The Stability

The aim of the work is to research the precritical and postcritical equilibrium of the stiffened plates subjected aliquant critical loads. Methods. The finiteelement complex MSC PATRAN - NASTRAN was used in the paper. To simulate the plates, flat four-node elements were used. Calculations taking into account geometric nonlinearity were carried out. The material of the shells was considered absolutely elastic. Results. A technique has been developed to study the stability of reinforced longitudinally compressed plates; the critical forces of the stiffened plates of various thicknesses had been calculated. Graphs of deflections dependences on the value of the compressive load had been constructed. The influence of initial geometric imperfections on the value of the critical loads for stiffened plates has been investigated.

The stability of rectangular thin-walled profile with loading according to the scheme of pure bending

2020 ◽  
pp. 41-45
Author(s):  
V.B. Zylev ◽  
◽  
P.O. Platnov ◽  
I.V. Alferov ◽  
◽  
...  
Keyword(s):  
Pure Bending ◽  
Thin Walled ◽  
The Stability

SHELL MATERIAL'S PERFORMANCE OF THE MICROCAPSULE FOR ELECTROLYTIC CO-DEPOSITION

2010 ◽  
Vol 24 (15n16) ◽  
pp. 3124-3130 ◽  
Author(s):  
HUI CONG LIU ◽  
XIU QING XU ◽  
WEI PING LI ◽  
YAN HONG GUO ◽  
LI-QUN ZHU
Keyword(s):  
Composite Coating ◽  
Methyl Cellulose ◽  
Water Vapor Permeability ◽  
Core Material ◽  
Vapor Permeability ◽  
Shell Material ◽  
The Core ◽  
Surface Performance ◽  
The Stability ◽  
Positive Effect

The shell material of microcapsules has an important effect on the electrolytic co-deposition behavior, the release of core material and the surface performance of composite coating. This paper discussed the tensile property and the stability of three shell materials including polyvinyl alcohol (PVA), gelatin and methyl cellulose (MC). It is found that these three shell materials have good mechanical strength and flexibility which are favorable to electrolytic co-deposition and stability of microcapsules in composite coating and that MC has well permeability and porosity which has a positive effect on the release of the core material in composite coating. Moreover, the study of the thermal properties and water vapor permeability of the three shell materials showed that their permeability improved with increase of temperature and humidity. In addition, the composite copper coating containing microcapsules with PVA, gelatin or MC as shell material was prepared respectively.

Effective design of a sandwich beam with a metal foam core

2007 ◽  
Vol 45 (4) ◽  
pp. 432-438 ◽  
Author(s):  
E. Magnucka-Blandzi ◽  
K. Magnucki
Keyword(s):  
Metal Foam ◽  
Sandwich Beam ◽  
Foam Core ◽  
Effective Design

Structural Integrity Research for Reactor Pressure Vessel Under In-Vessel Retention of a Core Melt

2016 ◽  
Author(s):  
Yongjian Gao ◽  
Yinbiao He ◽  
Ming Cao ◽  
Yuebing Li ◽  
Shiyi Bao ◽  
...  
Keyword(s):  
Pressure Vessel ◽  
Material Properties ◽  
Power Plants ◽  
Structural Integrity ◽  
Plastic Material ◽  
Plastic Region ◽  
Reactor Pressure Vessel ◽  
Elastic Plastic ◽  
Elastic Plastic Material ◽  
Reactor Pressure

In-Vessel Retention (IVR) is one of the most important severe accident mitigation strategies of the third generation passive Nuclear Power Plants (NPP). It is intended to demonstrate that in the case of a core melt, the structural integrity of the Reactor Pressure Vessel (RPV) is assured such that there is no leakage of radioactive debris from the RPV. This paper studied the IVR issue using Finite Element Analyses (FEA). Firstly, the tension and creep testing for the SA-508 Gr.3 Cl.1 material in the temperature range of 25°C to 1000°C were performed. Secondly, a FEA model of the RPV lower head was built. Based on the assumption of ideally elastic-plastic material properties derived from the tension testing data, limit analyses were performed under both the thermal and the thermal plus pressure loading conditions where the load bearing capacity was investigated by tracking the propagation of plastic region as a function of pressure increment. Finally, the ideal elastic-plastic material properties incorporating the creep effect are developed from the 100hr isochronous stress-strain curves, limit analyses are carried out as the second step above. The allowable pressures at 0 hr and 100 hr are obtained. This research provides an alternative approach for the structural integrity evaluation for RPV under IVR condition.

Thermodynamic Studies of the Core Histones:  pH and Ionic Strength Effects on the Stability of the (H3−H4)/(H3−H4)2System†

Biochemistry ◽  
1996 ◽  
Vol 35 (6) ◽  
pp. 2037-2046 ◽  
Author(s):  
Vassiliki Karantza ◽  
Ernesto Freire ◽  
Evangelos N. Moudrianakis
Keyword(s):  
Ionic Strength ◽  
Thermodynamic Studies ◽  
The Core ◽  
Core Histones ◽  
The Stability

Release Profile of a Model Protein Drug Depending on the Stability of Microspheres Based on Polyelectrolyte Complex

2007 ◽  
Vol 342-343 ◽  
pp. 505-508
Author(s):  
Sung Won Kim ◽  
Yun Sik Nam ◽  
Yeon Jin Min ◽  
Jong Ho Kim ◽  
Kwang Meyong Kim ◽  
...  
Keyword(s):  
Polyelectrolyte Complex ◽  
Coating Layer ◽  
Great Influence ◽  
Release Profile ◽  
Core Material ◽  
Glycol Chitosan ◽  
The Core ◽  
Key Factor ◽  
Model Protein ◽  
The Stability

Stability and disintegration of natural polyelectrolyte complex microspheres for protein drugs delivery have been extensively investigated because of their great influence on the drug release patterns. In this study, we tested stability of microspheres with alginate (Alg) core layered by either chitosan (Chi) or glycol chitosan (GChi) by examining release profiles of fluorophorelabeled bovine serum albumin (BSA) and lysozyme (Lys) from the microspheres. While GChi shell was disintegrated quickly, Chi-shell microspheres showed good stability in PBS. Disintegration of the coated layer induced the core material instable. The results indicated that while the charges of the shell material provided additional diffusion barrier against the protein release, the key factor to hold the proteins inside the microspheres was the integrity of the outer coating layer.

On Determining Elastic Modulus from Instrumented Indentation

2013 ◽  
Vol 668 ◽  
pp. 616-620
Author(s):  
Shuai Huang ◽  
Huang Yuan
Keyword(s):  
Finite Element ◽  
Elastic Modulus ◽  
Plastic Material ◽  
Instrumented Indentation ◽  
Computational Simulations ◽  
Elastic Plastic ◽  
Modified Method ◽  
Plastic Materials ◽  
Elastic Plastic Material ◽  
Elastic Plastic Materials

Computational simulations of indentations in elastic-plastic materials showed overestimate in determining elastic modulus using the Oliver & Pharr’s method. Deviations significantly increase with decreasing material hardening. Based on extensive finite element computations the correlation between elastic-plastic material property and indentation has been carried out. A modified method was introduced for estimating elastic modulus from dimensional analysis associated with indentation data. Experimental verifications confirm that the new method produces more accurate prediction of elastic modulus than the Oliver & Pharr’s method.

scholarly journals Stability and Instability in the Lysogenic State of Phage Lambda

2010 ◽  
Vol 192 (22) ◽  
pp. 6064-6076 ◽  
Author(s):  
John W. Little ◽  
Christine B. Michalowski
Keyword(s):  
Intrinsic Rate ◽  
Growth Conditions ◽  
Emergent Properties ◽  
Regulatory Circuits ◽  
Stability And Instability ◽  
Natural Range ◽  
Analysis Of Stability ◽  
Stable Association ◽  
The Stability ◽  
Gene Regulatory Circuits

ABSTRACT Complex gene regulatory circuits exhibit emergent properties that are difficult to predict from the behavior of the components. One such property is the stability of regulatory states. Here we analyze the stability of the lysogenic state of phage λ. In this state, the virus maintains a stable association with the host, and the lytic functions of the virus are repressed by the viral CI repressor. This state readily switches to the lytic pathway when the host SOS system is induced. A low level of SOS-dependent switching occurs without an overt stimulus. We found that the intrinsic rate of switching to the lytic pathway, measured in a host lacking the SOS response, was almost undetectably low, probably less than 10−8/generation. We surmise that this low rate has not been selected directly during evolution but results from optimizing the rate of switching in a wild-type host over the natural range of SOS-inducing conditions. We also analyzed a mutant, λprm240, in which the promoter controlling CI expression was weakened, rendering lysogens unstable. Strikingly, the intrinsic stability of λprm240 lysogens depended markedly on the growth conditions; lysogens grown in minimal medium were nearly stable but switched at high rates when grown in rich medium. These effects on stability likely reflect corresponding effects on the strength of the prm240 promoter, measured in an uncoupled assay system. Several derivatives of λprm240 with altered stabilities were characterized. This mutant and its derivatives afford a model system for further analysis of stability.

Sign in / Sign up

Export Citation Format

Share Document