Mechanical imaging of bamboo fiber cell walls and their composites by means of peakforce quantitative nanomechanics (PQNM) technique

Holzforschung ◽  
2015 ◽  
Vol 69 (8) ◽  
pp. 975-984 ◽  
Author(s):  
Dan Ren ◽  
Hankun Wang ◽  
Zixuan Yu ◽  
Hao Wang ◽  
Yan Yu
Keyword(s):  
Cell Wall ◽  
Elastic Modulus ◽  
Adhesion Force ◽  
Profile Analysis ◽  
Middle Lamella ◽  
Transitional Zone ◽  
Maleated Polypropylene ◽  
Force Microscopy ◽  
Atomic Force ◽  
Bamboo Fibers

Abstract The mechanical properties of cell wall layers of bamboo fibers (BFs) and the interphase between BFs and maleated polypropylene polymer (MAPP) were investigated by means of peakforce quantitative nanomechanics based on atomic force microscopy. This technique is well suited for simultaneous imaging of several important material indicators, such as elastic modulus, deformation at peak force, and adhesion force between probe tip and sample. Furthermore, quantitative local mechanical information could be extracted from the obtained images by means of profile analysis. In case of BFs, the elastic modulus of the secondary cell wall and the compound middle lamella was found to be 21.3±2.9 GPa and 14.4±3.6 GPa, respectively, which agrees well with data measured by the nanoindentation technique. Additionally, this technique was also applied for bamboo plastic composites, and data from the transitional zone (interphase) between BFs and the MAPP matrix, with a thickness of 102±18 nm, could be obtained.

Atomic force microscopy-based nanomechanical characterization of kenaf fiber

2019 ◽  
Vol 54 (15) ◽  
pp. 2065-2071 ◽  
Author(s):  
M Subbir Parvej ◽  
Xinnan Wang ◽  
Joseph Fehrenbach ◽  
Chad A Ulven
Keyword(s):  
Mechanical Properties ◽  
Atomic Force Microscopy ◽  
Elastic Modulus ◽  
Adhesion Force ◽  
Fiber Surface ◽  
Gauge Length ◽  
Hibiscus Cannabinus ◽  
Kenaf Fiber ◽  
Force Microscopy ◽  
Atomic Force

Kenaf ( Hibiscus cannabinus L.) fiber is being extensively used as a reinforcement material in composites due to its excellent mechanical properties. To use this fiber more efficiently, it is necessary to understand its mechanical properties at micro/nano meter scale. Despite the evidence of some past studies to determine the elastic modulus of kenaf fiber, most of them were performed on fiber bundles. Bundle-based method to find the elastic moduli has some obvious issues of foreign materials being present, incorrect gauge length, and sample diameter due to void spaces. These issues pose as obvious hurdles to determine the elastic modulus accurately. In this study, individual kenaf micro fiber was used to find elastic modulus in the radial direction. The radial elastic modulus of the fiber was characterized by atomic force microscopy-based nanoindentation. To determine the radial elastic modulus from the force versus sample deformation data, the extended Johnson–Kendall–Roberts model was used which considered adhesion force from the fiber surface. The radial elastic modulus of the kenaf fiber was found to be 2.3 GPa.

scholarly journals Quantitative Nanomechanical Mapping of Polyolefin Elastomer at Nanoscale with Atomic Force Microscopy

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Shuting Zhang ◽  
Yihui Weng ◽  
Chunhua Ma
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Mechanical Response ◽  
Adhesion Force ◽  
Time Dependent ◽  
Surface Adhesion ◽  
Force Microscopy ◽  
Mechanics Model ◽  
Atomic Force ◽  
Force Volume

AbstractElastomeric nanostructures are normally expected to fulfill an explicit mechanical role and therefore their mechanical properties are pivotal to affect material performance. Their versatile applications demand a thorough understanding of the mechanical properties. In particular, the time dependent mechanical response of low-density polyolefin (LDPE) has not been fully elucidated. Here, utilizing state-of-the-art PeakForce quantitative nanomechanical mapping jointly with force volume and fast force volume, the elastic moduli of LDPE samples were assessed in a time-dependent fashion. Specifically, the acquisition frequency was discretely changed four orders of magnitude from 0.1 up to 2 k Hz. Force data were fitted with a linearized DMT contact mechanics model considering surface adhesion force. Increased Young’s modulus was discovered with increasing acquisition frequency. It was measured 11.7 ± 5.2 MPa at 0.1 Hz and increased to 89.6 ± 17.3 MPa at 2 kHz. Moreover, creep compliance experiment showed that instantaneous elastic modulus E1, delayed elastic modulus E2, viscosity η, retardation time τ were 22.3 ± 3.5 MPa, 43.3 ± 4.8 MPa, 38.7 ± 5.6 MPa s and 0.89 ± 0.22 s, respectively. The multiparametric, multifunctional local probing of mechanical measurement along with exceptional high spatial resolution imaging open new opportunities for quantitative nanomechanical mapping of soft polymers, and can potentially be extended to biological systems.

Effect of the penetration of isocyanates (pMDI) on the nanomechanics of wood cell wall evaluated by AFM-IR and nanoindentation (NI)

Holzforschung ◽  
2018 ◽  
Vol 72 (4) ◽  
pp. 301-309 ◽  
Author(s):  
Xinzhou Wang ◽  
Linguo Zhao ◽  
Yuhe Deng ◽  
Yanjun Li ◽  
Siqun Wang
Keyword(s):  
Mechanical Properties ◽  
Cell Wall ◽  
Elastic Modulus ◽  
Loss Modulus ◽  
Dynamic Mechanical Properties ◽  
Force Microscopy ◽  
Frequency Scale ◽  
Atomic Force ◽  
Term Creep ◽  
Physical And Chemical

AbstractThe effects of the penetration of polymeric diphenyl methane diisocyanate (pMDI) on the chemical structure as well as the static and dynamic mechanical properties of wood cell walls (CWs) were investigated by atomic force microscopy with infrared radiation (AFM-IR) and nanoindentation (NI). Results indicated that the possible penetration of some pMDI molecules into the CW affected the mechanical properties of wood CW significantly. The physical and chemical interactions between pMDI and CW may strengthen the connections between the cell-wall materials and thus improved the static elastic modulus and short-term creep resistance of the CW. The elastic modulus (Er) of CWs was increased from 16.5 to 17.7 GPa; the creep ratio of the CWs decreased by 15% after the penetration of pMDI. Dynamic NI properties indicated that the effective penetration of pMDI had a positive effect on the reduced storage modulus (Er′), whereas it negatively affected the loss modulus (Er″) and the damping coefficient (tanδ) of wood CW in a large frequency scale.

scholarly journals A Universal Model for the Log-Normal Distribution of Elasticity in Polymeric Gels and Its Relevance to Mechanical Signature of Biological Tissues

Biology ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 64
Author(s):  
Arnaud Millet
Keyword(s):  
Elastic Modulus ◽  
Normal Distribution ◽  
Biological Tissues ◽  
Force Microscopy ◽  
Polymeric Gels ◽  
Atomic Force ◽  
Clear Explanation ◽  
Log Normal ◽  
Log Normal Distribution

The mechanosensitivity of cells has recently been identified as a process that could greatly influence a cell’s fate. To understand the interaction between cells and their surrounding extracellular matrix, the characterization of the mechanical properties of natural polymeric gels is needed. Atomic force microscopy (AFM) is one of the leading tools used to characterize mechanically biological tissues. It appears that the elasticity (elastic modulus) values obtained by AFM presents a log-normal distribution. Despite its ubiquity, the log-normal distribution concerning the elastic modulus of biological tissues does not have a clear explanation. In this paper, we propose a physical mechanism based on the weak universality of critical exponents in the percolation process leading to gelation. Following this, we discuss the relevance of this model for mechanical signatures of biological tissues.

scholarly journals Assessing the Functional Properties of TiZr Nanotubular Structures for Biomedical Applications, through Nano-Scratch Tests and Adhesion Force Maps

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 900
Author(s):  
Maria Vardaki ◽  
Aida Pantazi ◽  
Ioana Demetrescu ◽  
Marius Enachescu
Keyword(s):  
Surface Roughness ◽  
Functional Properties ◽  
Bacterial Adhesion ◽  
Biomedical Applications ◽  
Adhesion Force ◽  
Roughness Parameters ◽  
Force Microscopy ◽  
Atomic Force ◽  
The Mean ◽  
Scratch Tests

In this work we present the results of a functional properties assessment via Atomic Force Microscopy (AFM)-based surface morphology, surface roughness, nano-scratch tests and adhesion force maps of TiZr-based nanotubular structures. The nanostructures have been electrochemically prepared in a glycerin + 15 vol.% H2O + 0.2 M NH4F electrolyte. The AFM topography images confirmed the successful preparation of the nanotubular coatings. The Root Mean Square (RMS) and average (Ra) roughness parameters increased after anodizing, while the mean adhesion force value decreased. The prepared nanocoatings exhibited a smaller mean scratch hardness value compared to the un-coated TiZr. However, the mean hardness (H) values of the coatings highlight their potential in having reliable mechanical resistances, which along with the significant increase of the surface roughness parameters, which could help in improving the osseointegration, and also with the important decrease of the mean adhesion force, which could lead to a reduction in bacterial adhesion, are providing the nanostructures with a great potential to be used as a better alternative for Ti implants in dentistry.

Preparation and Research on the Lateral Elastic Modulus of the MnO2 Nanowires

2013 ◽  
Vol 662 ◽  
pp. 84-87
Author(s):  
Yong Jiang ◽  
Jian Cheng Deng ◽  
Yan Huai Ding ◽  
Jiu Ren Yin ◽  
Ping Zhang
Keyword(s):  
Elastic Modulus ◽  
Crystal Form ◽  
Bending Test ◽  
X Ray Diffraction ◽  
Nanowire Diameter ◽  
X Ray ◽  
Three Point Bending ◽  
Force Microscopy ◽  
Atomic Force ◽  
Mno2 Nanowires

MnO2 nanowires with large aspect ratio were successfully synthesized via a hydrothermal method. In this method, Mn(NO3)2 was as a source of manganese and NH4NO3 as an oxidant. The structure and morphology of the MnO2 nanowires were characterized by X ray diffraction (XRD) and scanning electron microscope (SEM). Their lateral elastic modulus was characterized via a nanoscale three-point bending test by atomic force microscopy (AFM) equipped with picoforce. The results indicate that the crystal form of MnO2 was β-MnO2. The elastic modulus of the nanowires decreased with the increase in nanowire diameter. This elastic modulus was in the range of 33.36-77.84GPa as the diameter ranged from 240 to 185nm.

Sign in / Sign up

Export Citation Format

Share Document