Changes in the Material Properties of Steel 1.4762 Depending on the Temperature
AbstractThis paper presents the experimental results and analysis of the behaviour of steel 1.4762 at different temperatures. Tensile mechanical properties and creep behaviour were determined using uniaxial tests. Charpy impact test was used to determine impact energies at different temperatures. The mentioned mechanical properties are displayed as engineering stress–strain diagrams while material resistance to creep is presented in the form of creep curves. Based on Charpy impact energy an assessment of fracture toughness is given. Experimental results show that the values of mechanical properties are continuously decreased by increasing the temperature. After the temperature of 623 K (tensile strength: 468 MPa; yield strength: 298 MPa) the decrease of the ultimate strength and yield strength is especially emphasized and the difference between them becomes smaller. The creep resistance is considered quite small, except at low stress levels.