scholarly journals On strongly nonlinear gravity waves in a vertically sheared atmosphere

2020 ◽  
Vol 6 (1) ◽  
pp. 63-74
Author(s):  
Mark Schlutow ◽  
Georg S. Voelker

Abstract We investigate strongly nonlinear stationary gravity waves which experience refraction due to a thin vertical shear layer of horizontal background wind. The velocity amplitude of the waves is of the same order of magnitude as the background flow and hence the self-induced mean flow alters the modulation properties to leading order. In this theoretical study, we show that the stability of such a refracted wave depends on the classical modulation stability criterion for each individual layer, above and below the shearing. Additionally, the stability is conditioned by novel instability criteria providing bounds on the mean-flow horizontal wind and the amplitude of the wave. A necessary condition for instability is that the mean-flow horizontal wind in the upper layer is stronger than the wind in the lower layer.

2014 ◽  
Vol 755 ◽  
pp. 397-428 ◽  
Author(s):  
Peng Wang ◽  
James C. McWilliams ◽  
Claire Ménesguen

AbstractThe linear instability of several rotating, stably stratified, interior vertical shear flows $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}\overline{U}(z)$ is calculated in Boussinesq equations. Two types of baroclinic, ageostrophic instability, AI1 and AI2, are found in odd-symmetric $\overline{U}(z)$ for intermediate Rossby number ($\mathit{Ro}$). AI1 has zero frequency; it appears in a continuous transformation of the unstable mode properties between classic baroclinic instability (BCI) and centrifugal instability (CI). It begins to occur at intermediate $\mathit{Ro}$ values and horizontal wavenumbers ($k,l$) that are far from $l= 0$ or $k = 0$, where the growth rate of BCI or CI is the strongest. AI1 grows by drawing kinetic energy from the mean flow, and the perturbation converts kinetic energy to potential energy. The instability AI2 has inertia critical layers (ICL); hence it is associated with inertia-gravity waves. For an unstable AI2 mode, the coupling is either between an interior balanced shear wave and an inertia-gravity wave (BG), or between two inertia-gravity waves (GG). The main energy source for an unstable BG mode is the mean kinetic energy, while the main energy source for an unstable GG mode is the mean available potential energy. AI1 and BG type AI2 occur in the neighbourhood of $A-S= 0$ (a sign change in the difference between absolute vertical vorticity and horizontal strain rate in isentropic coordinates; see McWilliams et al., Phys. Fluids, vol. 10, 1998, pp. 3178–3184), while GG type AI2 arises beyond this condition. Both AI1 and AI2 are unbalanced instabilities; they serve as an initiation of a possible local route for the loss of balance in 3D interior flows, leading to an efficient energy transfer to small scales.


2020 ◽  
Vol 77 (3) ◽  
pp. 859-870 ◽  
Author(s):  
Matthew T. Gliatto ◽  
Isaac M. Held

Abstract Rossby waves, propagating from the midlatitudes toward the tropics, are typically absorbed by critical latitudes (CLs) in the upper troposphere. However, these waves typically encounter CLs in the lower troposphere first. We study a two-layer linear scattering problem to examine the effects of lower CLs on these waves. We begin with a review of the simpler barotropic case to orient the reader. We then progress to the baroclinic case using a two-layer quasigeostrophic model in which there is vertical shear in the mean flow on which the waves propagate, and in which the incident wave is assumed to be an external-mode Rossby wave. We use linearized equations and add small damping to remove the critical-latitude singularities. We consider cases in which either there is only one CL, in the lower layer, or there are CLs in both layers, with the lower-layer CL encountered first. If there is only a CL in the lower layer, the wave’s response depends on the sign of the mean potential vorticity gradient at this lower-layer CL: if the PV gradient is positive, then the CL partially absorbs the wave, as in the barotropic case, while for a negative PV gradient, the CL is a wave emitter, and can potentially produce overreflection and/or overtransmission. Our numerical results indicate that overtransmission is by far the dominant response in these cases. When an upper-layer absorbing CL is encountered, following the lower-layer encounter, one can still see the signature of overtransmission at the lower-layer CL.


2021 ◽  
Author(s):  
Georg Sebastian Voelker ◽  
Mark Schlutow

<p>Internal gravity waves are a well-known mechanism of energy redistribution in stratified fluids such as the atmosphere. They may propagate from their generation region, typically in the Troposphere, up to high altitudes. During their lifetime internal waves couple to the atmospheric background through various processes. Among the most important interactions are the exertion of wave drag on the horizontal mean-flow, the heat generation upon wave breaking, or the mixing of atmospheric tracers such as aerosols or greenhouse gases.</p><p>Many of the known internal gravity wave properties and interactions are covered by linear or weakly nonlinear theories. However, for the consideration of some of the crucial effects, like a reciprocal wave-mean-flow interaction including the exertion of wave drag on the mean-flow, strongly nonlinear systems are required. That is, there is no assumption on the wave amplitude relative to the mean-flow strength such that they may be of the same order.</p><p>Here, we exploit a strongly nonlinear Boussinesq theory to analyze the stability of a stationary internal gravity wave which is refracted at the vertical edge of a horizontal jet. Thereby we assume that the incident wave is horizontally periodic, non-hydrostatic, and vertically modulated. Performing a linear stability analysis in the vicinity of the jet edge we find necessary and sufficient criteria for instabilities to grow. In particular, the refracted wave becomes unstable if its incident amplitude is large enough and both mean-flow horizontal winds, below and above the edge of the jet, do not exceed particular upper bounds.</p>


2014 ◽  
Vol 745 ◽  
pp. 647-681 ◽  
Author(s):  
Yee Chee See ◽  
Matthias Ihme

AbstractLocal linear stability analysis has been shown to provide valuable information about the response of jet diffusion flames to flow-field perturbations. However, this analysis commonly relies on several modelling assumptions about the mean flow prescription, the thermo-viscous-diffusive transport properties, and the complexity and representation of the chemical reaction mechanisms. In this work, the effects of these modelling assumptions on the stability behaviour of a jet diffusion flame are systematically investigated. A flamelet formulation is combined with linear stability theory to fully account for the effects of complex transport properties and the detailed reaction chemistry on the perturbation dynamics. The model is applied to a methane–air jet diffusion flame that was experimentally investigated by Füriet al.(Proc. Combust. Inst., vol. 29, 2002, pp. 1653–1661). Detailed simulations are performed to obtain mean flow quantities, about which the stability analysis is performed. Simulation results show that the growth rate of the inviscid instability mode is insensitive to the representation of the transport properties at low frequencies, and exhibits a stronger dependence on the mean flow representation. The effects of the complexity of the reaction chemistry on the stability behaviour are investigated in the context of an adiabatic jet flame configuration. Comparisons with a detailed chemical-kinetics model show that the use of a one-step chemistry representation in combination with a simplified viscous-diffusive transport model can affect the mean flow representation and heat release location, thereby modifying the instability behaviour. This is attributed to the shift in the flame structure predicted by the one-step chemistry model, and is further exacerbated by the representation of the transport properties. A pinch-point analysis is performed to investigate the stability behaviour; it is shown that the shear-layer instability is convectively unstable, while the outer buoyancy-driven instability mode transitions from absolutely to convectively unstable in the nozzle near field, and this transition point is dependent on the Froude number.


1991 ◽  
Vol 224 ◽  
pp. 159-175 ◽  
Author(s):  
T. L. Jackson ◽  
C. E. Grosch

We report the results of a comprehensive comparative study of the inviscid spatial stability of a parallel compressible mixing layer using various models for the mean flow. The models are (i) the hyperbolic tangent profile for the mean speed and the Crocco relation for the mean temperature, with the Chapman viscosity–temperature relation and a Prandtl number of one; (ii) the Lock profile for the mean speed and the Crocco relation for the mean temperature, with the Chapman viscosity-temperature relation and a Prandtl number of one; and (iii) the similarity solution for the coupled velocity and temperature equations using the Sutherland viscosity–temperature relation and arbitrary but constant Prandtl number. The purpose of this study was to determine the sensitivity of the stability characteristics of the compressible mixing layer to the assumed thermodynamic properties of the fluid. It is shown that the qualitative features of the stability characteristics are quite similar for all models but that there are quantitative differences resulting from the difference in the thermodynamic models. In particular, we show that the stability characteristics are sensitive to the value of the Prandtl number and to a particular value of the temperature ratio across the mixing layer.


2019 ◽  
Vol 869 ◽  
Author(s):  
Boyu Fan ◽  
T. R. Akylas

An asymptotic model is developed for the parametric subharmonic instability (PSI) of finite-width nearly monochromatic internal gravity wave beams in the presence of a background constant horizontal mean flow. The subharmonic perturbations are taken to be short-scale wavepackets that may extract energy via resonant triad interactions while in contact with the underlying beam, and the mean flow is assumed to be small so that its advection effect on the perturbations is as important as dispersion, triad nonlinearity and viscous dissipation. In this ‘distinguished limit’, the perturbation dynamics are governed by the same evolution equations as those derived in Karimi & Akylas (J. Fluid Mech., vol. 757, 2014, pp. 381–402), except for a mean flow term that affects the group velocity of the perturbations and imposes an additional necessary condition for PSI, which stabilizes very short-scale perturbations. As a result, it is possible for a small amount of mean flow to weaken PSI dramatically.


1967 ◽  
Vol 27 (4) ◽  
pp. 657-689 ◽  
Author(s):  
R. E. Kelly

In experiments concerning the instability of free shear layers, oscillations have been observed in the downstream flow which have a frequency exactly half that of the dominant oscillation closer to the origin of the layer. The present analysis indicates that the phenomenon is due to a secondary instability associated with the nearly periodic flow which arises from the finite-amplitude growth of the fundamental disturbance.At first, however, the stability of inviscid shear flows, consisting of a non-zero mean component, together with a component periodic in the direction of flow and with time, is investigated fairly generally. It is found that the periodic component can serve as a means by which waves with twice the wavelength of the periodic component can be reinforced. The dependence of the growth rate of the subharmonic wave upon the amplitude of the periodic component is found for the case when the mean flow profile is of the hyperbolic-tangent type. In order that the subharmonic growth rate may exceed that of the most unstable disturbance associated with the mean flow, the amplitude of the streamwise component of the periodic flow is required to be about 12 % of the mean velocity difference across the shear layer. This represents order-of-magnitude agreement with experiment.Other possibilities of interaction between disturbances and the periodic flow are discussed, and the concluding section contains a discussion of the interactions on the basis of the energy equation.


Author(s):  
Sylvain C. Humbert ◽  
Jonas Moeck ◽  
Alessandro Orchini ◽  
Christian Oliver Paschereit

Abstract Thermoacoustic oscillations in axisymmetric annular combustors are generally coupled by degenerate azimuthal modes, which can be of standing or spinning nature. Symmetry breaking due to the presence of a mean azimuthal flow splits the degenerate thermoacoustic eigenvalues, resulting in pairs of counter-spinning modes with close but distinct frequencies and growth rates. In this study, experiments have been performed using an annular system where the thermoacoustic feedback due to the flames is mimicked by twelve identical electroacoustic feedback loops. The mean azimuthal flow is generated by fans. We investigate the standing/spinning nature of the oscillations as a function of the Mach number for two types of initial states, and how the stability of the system is affected by the mean azimuthal flow. It is found that spinning, standing or mixed modes can be encountered at very low Mach number, but increasing the mean velocity promotes one spinning direction. At sufficiently high Mach number, spinning modes are observed in the limit cycle oscillations. In some cases, the initial conditions have a significant impact on the final state of the system. It is found that the presence of a mean azimuthal flow increases the acoustic damping. This has a beneficial effect on stability: it often reduces the amplitude of the self-sustained oscillations, and can even suppress them in some cases. However, we observe that the suppression of a mode due to the mean flow may destabilize another one. We discuss our findings in relation with an existing low-order model.


2006 ◽  
Vol 24 (10) ◽  
pp. 2481-2491 ◽  
Author(s):  
V. Deepa ◽  
G. Ramkumar ◽  
B. V. Krishna Murthy

Abstract. The altitude profiles of temperature fluctuations in the stratosphere and mesosphere observed with the Rayleigh Lidar at Gadanki (13.5° N, 79.2° E) on 30 nights during January to March 1999 and 21 nights during February to April 2000 were analysed to bring out the temporal and vertical propagation characteristics of gravity wave perturbations. The gravity wave perturbations showed periodicities in the 0.5–3-h range and attained large amplitudes (4–5 K) in the mesosphere. The phase propagation characteristics of gravity waves with different periods showed upward wave propagation with a vertical wavelength of 5–7 km. The mean flow acceleration computed from the divergence of momentum flux of gravity waves is compared with that calculated from monthly values of zonal wind obtained from RH-200 rockets flights. Thus, the contribution of gravity waves towards the generation of Stratospheric Semi Annual Oscillation (SSAO) is estimated.


2020 ◽  
Author(s):  
Nikolai M. Gavrilov ◽  
Sergej P. Kshevetskii

<p>Acoustic-gravity waves (AGWs) measuring at big heights may be generated in the troposphere and propagate upwards. A high-resolution three-dimensional numerical model was developed for simulating nonlinear AGWs propagating from the ground to the upper atmosphere. The model algorithms are based on the finite-difference analogues of the main conservation laws. This methodology let us obtaining the physically correct generalized wave solutions of the nonlinear equations. Horizontally moving sinusoidal structures of vertical velocity on the ground are used for the AGW excitation in the model. Numerical simulations were made in an atmospheric region having horizontal dimensions up to several thousand kilometers and the height extention up to 500 km. Vertical distributions of the mean temperature, density, molecular viscosity and thermal conductivity are specified using standard models of the atmosphere.</p><p>Simulations were made for different horizontal wavelengths, amplitudes and speeds of the wave sources at the ground. After “switch on” the tropospheric wave source, an initial AGW pulse very quickly (for several minutes) could propagate to heights up to 100 km and above. AGW amplitudes increase with height and waves may break down in the middle and upper atmosphere. Wave instability and dissipation may lead to formations of wave accelerations of the mean flow and to producing wave-induced jet flows in the middle and upper atmosphere. Nonlinear interactions may lead to instabilities of the initial wave and to the creation of smaller-scale perturbations. These perturbations may increase temperature and wind gradients and could enhance the wave energy dissipation.</p><p>In this study, the wave sources contain a superposition of two AGW modes with different periods, wavelengths and phase speeds. Longer-period AGW modes served as the background conditions for the shorter-period wave modes. Thus, the larger-scale AGWs can modulate amplitudes of small-scale waves. In particular, interactions of two wave modes could sharp vertical temperature gradients and make easier the wave breaking and generating  turbulence. On the other hand, small-wave wave modes might increase dissipation and modify the larger-scale modes.This study was partially supported by the Russian Basic Research Foundation (# 17-05-00458).</p>


Sign in / Sign up

Export Citation Format

Share Document