scholarly journals Studies on the drying kinetics and rehydration capacities of cardaba banana compared to plantain slices

2018 ◽  
Vol 3 (1) ◽  
pp. 57-71
Author(s):  
K. A. Taiwo ◽  
R. T. Babalola
Keyword(s):  
Protein Content ◽  
Bulk Density ◽  
Room Temperature ◽  
Absorption Capacity ◽  
Drying Kinetics ◽  
Oil Absorption ◽  
Drying Time ◽  
Swelling Power ◽  
Banana Flour ◽  
Kinetics Of

Abstract The utilization of Cardaba banana as food or functional food requires knowledge about its preservation (drying), and physical and functional characteristics of the crop. The study is aimed at determining the drying kinetics of Cardaba slices as well as to determine the physio-chemical and rehydration properties. Unripe Cardaba banana and plantain bunches were produced into flour separately. The drying kinetics of the slices (sun, 50°C and 70°C) with and without blanching were monitored. The rehydration capacities of the slices at room temperature, 45°C, 75°C and 95°C were determined. The functional and proximate properties of the flour samples were determined. Results showed that the higher the drying temperature, the faster the drying and the shorter the drying time. Furthermore, the greater the rehydration capacity and the greater the shrinkage of the Cardaba banana and plantain slices. Cardaba banana flour samples were higher in bulk density (0.52 to 0.65 g/ ml), oil absorption capacity (76.47 to 98.83%), swelling power (4.42 to 6.36 g/g) and protein content (4.73 to 9.92%) than plantain flour samples in bulk density (0.56 g/ml to 0.73 g/ml), oil absorption capacity (66.20 to 90.67%), swelling power (4.15 to 5.65 g/g) and protein content (3.66 to 8.43%). The result obtained in this study proved that Cardaba banana compares favorably with plantain and can be used as a substituted for plantain.

scholarly journals Pengaruh Lama Perkecambahan terhadap Karakteristik Fisik, Kimia dan Fungsional Tepung Kecambah Jagung Pulut (Zea mays ceratina L.)

2021 ◽  
Vol 10 (2) ◽  
pp. 304
Author(s):  
Gery Hartawan ◽  
Ni Wayan Wisaniyasa ◽  
Anak Agung Istri Sri Wiadnyani
Keyword(s):  
Water Absorption ◽  
Protein Content ◽  
Bulk Density ◽  
Fat Content ◽  
Absorption Capacity ◽  
Ash Content ◽  
Oil Absorption ◽  
Corn Flour ◽  
Swelling Power ◽  
Waxy Corn

This study aims to know the effect of time on the germinated waxy corn flour characteristics and to know which time that can produce a germinated waxy corn flour with the best characteristics. This research used a Complete Randomized Design with a different germination time as the treatment, which is 0 hour, 24 hour, 36 hour and 48 hour. The experimentation was repeated 4 times resulting 16 experimental units. The data obtained were analyzed using an analysis of variance and if the treatment had a significant effect, it was followed by a Duncan Multiple Range Test (DMRT). The results showed that the effect of time had a very significant effect on total rendement, L’ value (brightness), b’ value (green-yellow), protein content, water absorption capacity, swelling power, solubility of germinated waxy corn flour. This research also resulting a significant effect on moisture content and carbohydrate content, but resulting a non-significant effect on bulk density, a’ value (blue-red), ash content, fat content, crude fiber content and oil absorption capacity. The best characteristic of the flour in this study was the waxy corn flour that has been germinated for 48 hours with 79.44% rendement, 0.50 g/ml bulk density, L’:54.34, a’: 6.90, b’: 22,89 color, 7.15% water content, 1.56% ash content, 6.36% fat content, 9.66% protein content, 82.31% carbohydrates content, 2.39% fiber content, 1.55 ml/g water absorption, 1.81 ml/g oil absorption, 6.70 g/g swelling power, and 51.72% solubility.

scholarly journals Functional Properties of Tigernut and Cowpea Flour Blends

2020 ◽  
Vol 2 (6) ◽  
Author(s):  
Patience C. Obinna-Echem ◽  
Happiness I. Wachukwu-Chikaodi ◽  
Okwagwung A. Dickson
Keyword(s):  
Bulk Density ◽  
Wheat Flour ◽  
Functional Properties ◽  
Good Alternative ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Oil Absorption ◽  
Swelling Power ◽  
Cowpea Flour ◽  
Flour Blends

The pH and functional properties: water and oil absorption capacity, bulk density, solubility, swelling power and foaming capacity of tigernut and cowpea flour blends were determined. The flour blends were coded with the letters B, C, D, E, F, G and H for cowpea flour substitutions of 5, 10, 15, 20, 30, 40 and 50 % respectively. For comparison sample A1, A2 and A3 representing 100 % of wheat, tigernut and cowpea respectively, were also evaluated. Standard methods were used for all the analysis. pH of the flour samples varied significantly (P ≤ 0.05) from 5.60-6.23 for sample B (5 % cowpea flour substitution) and A2 (100% tiger nut flour) respectively. Water and oil absorption capacity varied significantly (P ≤ 0.05) from 1.00-2.90 ml/g and 0.39-1.38 ml/g respectively. Sample A1 (100% wheat flour) and Sample B (5% Cowpea: 95% tigernut flour) was significantly (P ≤ 0.05) the highest in water absorption capacity while sample A1 (% wheat flour) had the highest oil absorption capacity. Bulk density varied from 0.58 - 0.84 g/cm3. Although Cowpea flour (sample A3) had the highest bulk density, there was significant (P ≤ 0.05) decrease with increase in cowpea substitution. Swelling power and solubility ranged from 0.08-6.74 g/g and 8.00–67.35 % respectively. Sample A1 (% wheat flour) had significantly (P ≤ 0.05) the highest solubility and swelling power while Sample A3 (% cowpea flour) had the least. The functional properties of the tigernut-cowpea composite flour were comparable with that of the wheat flour, except for the swelling power that was significantly (P ≤ 0.05) higher for the wheat flour. The result showed that the composite tigernut-cowpea flour can be good alternative in the production of bakery products that would not require much swelling.

scholarly journals Functional and Physicochemical Characteristics of Raw, Roasted and Germinated Buckwheat Flour

2019 ◽  
Author(s):  
Beenu Tanwar ◽  
Nistha Lamsal ◽  
Ankit Goyal ◽  
Vikas Kumar
Keyword(s):  
Antioxidant Activity ◽  
Water Absorption ◽  
Bulk Density ◽  
Phenolic Content ◽  
Absorption Capacity ◽  
Total Phenolic ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Swelling Power ◽  
Buckwheat Flour

Purpose: Buckwheat, a pseudocereal is a nutritionally dense and gluten-free grain which has a great potential especially in the functional food industry. Domestic processing methods like germination and roasting may enhance the nutritional and functional components of the buckwheat. Design/methodology/approach: The raw, roasted (120°C for 10 min) and germinated (27 ± 3°C for 24 hours) seed flour was analyzed for functional (bulk density, water absorption capacity, oil absorption capacity, swelling power, and emulsifying capacity and activity) and physicochemical (fat, ash, protein, total carbohydrate, total phenolic content and antioxidant activity) parameters. Findings: Both the methods showed varied deviation of functional properties and nutrients from the raw flour. Germination significantly (p 0.05) increased the protein (11.5%) and moisture (14.66%) whereas, decreased ash (1.8%), carbohydrate (62.84%), fat (1.33%) and fiber (7.87%); roasting significantly (p 0.05) increased the carbohydrate (71.38%) whereas, decreased ash (1.8%), fat (1.33%), fibre (6.32%), moisture (11.66%) and protein (7.6%) content. Germination significantly (p 0.05) increased the phenolic content and antioxidant activity (82.63%). Bulk density and emulsion capacity decreased in both germinated and roasted buckwheat flour. However, both germination and roasting significantly (p 0.05) increased the oil absorption capacity, swelling power, and water absorption capacity. Originality/value: The present study suggests that germinated and roasted flours can be utilized commercially for the production of economical, better and nutrient-dense food products for people suffering from cereal-based health disorders.

scholarly journals SIFAT FISIKOKIMIA DAN FUNGSIONAL PATI DARI MOCAF (MODIFIED CASSAVA FLOUR) VARIETAS KASPRO DAN CIMANGGU

2019 ◽  
Vol 15 (2) ◽  
pp. 80 ◽  
Author(s):  
Nurud Diniyah ◽  
Achmad Subagio ◽  
Riri Nur Lutfian Sari ◽  
Nugraha Yuwana
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Functional Properties ◽  
Block Design ◽  
Absorption Capacity ◽  
Raw Material ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Cassava Flour ◽  
Swelling Power

<p>Singkong varietas manis (Cimanggu) dan pahit (Kaspro) dapat digunakan sebagai bahan baku dalam pembuatan MOCAF. Ekstraksi pati MOCAF dapat dipengaruhi oleh lama fermentasi dan varietas singkong. Tujuan dari penelitian ini adalah mengetahui pengaruh perbedaan lama fermentasi terhadap sifat fungsional pati dari MOCAF dengan dua varietas singkong Kaspro dan Cimanggu. Penelitian ini menggunakan metode Rancangan Acak Kelompok (RAK) dengan faktor tunggal yaitu lama fermentasi (0, 12, 24 jam) dan varietas sebagai kelompoknya (Cimanggu dan Kaspro) dengan 3 kali ulangan. Parameter yang dianalisis yaitu sifat fisik (densitas kamba dan warna), sifat kimia (kadar protein, lemak, abu dan karbohidrat) serta sifat fungsional pati MOCAF (<em>swelling power, solubilitas</em>, daya serap air dan daya serap minyak). Hasil penelitian menunjukkan bahwa lama fermentasi 24 jam dari singkong varietas Kaspro memiliki nilai tertinggi yaitu <em>bulk density </em>0,7505±0,0158 (g/mL), <em>swelling power </em>7,4516±0,1185 (g/g), <em>solubility </em>1,9294±0,2456 (%), <em>water absorption capacity </em>(WAC) 12,0000±1,0000 (mL/g) dan <em>oil absorption capacity </em>(OAC) 17,6667±0,5774 (mL/g), <em>lightness</em> 89,9433±0,1079 dan <em>whitness index </em>85,9113±0,0821 serta kadar protein, lemak, abu dan karbohidrat berturut-turut (0,6094±0,04; 0,3666±0,12; 0,1849±0,03 dan 86,0125±0,42 %). Penggunaan varietas yang berbeda sebagai bahan baku MOCAF, menunjukkan hasil bahwa singkong dengan kadar sianida tinggi juga memiliki pati lebih tinggi (Kaspro), memiliki sifat fungsional (b<em>ulk density, swelling power, solubility</em>, WAC, OAC) yang lebih baik sehingga dapat digunakan untuk keperluan dunia industri yang lebih luas.</p><p> </p><p><strong>Functional Properties of Starch MOCAF (Modified Cassava Flour) from Cassava Variety Kaspro and Cimanggu</strong></p><p>Cassava from sweet (Cimanggu) and bitter (Kaspro) varieties can be used as raw material to produced MOCAF. MOCAF’s starch extraction can be influenced by time of fermentation and variety of cassava. The aim of this research is to determine the effect of time fermentation on the functional properties of MOCAF starch which made from two varieties of cassava (Kaspro and Cimanggu). Randomized Block Design (RAK) with the single factor, time of fermentation (0, 12, 24 hours) and varieties as its group (Cimanggu and Kaspro) with triplicate was used in this research. The physical properties ( bulk density, colour), chemical properties (protein, fat, ash and carbohydrate) and functional properties of MOCAF starch (swelling power, solubility, water absorption capacity and oil absorption capacity) were evaluated. The result showed that Kaspro variety and time of fermentation 24 hour had the highest value of bulk density 0,7505±0,0158 (g/mL), swelling power 7,4516±0,1185 (g/g), solubility 1,9294±0,2456 (%), WAC 12,0000±1,0000 (mL/g) dan OAC 17,6667±0,5774 (mL/g), lightness 89,9433±0,1079, whiteness index 85,9113±0,0821, protein, fat, ash and carbohydrate content respectively 0,6094±0,04; 0,3666±0,12; 0,1849±0,03 and 86,0125±0,42 %. The varieties of cassava with highest cyanide content (Kaspro) also highest in starch content shows that has better functional properties (bulk density, swelling power, solubility, WAC, OAC) so it can be used to widely application for industrial.</p><p><strong><br /></strong></p>

The effect of sugar beet fiber addition on the chemical properties of tortilla chips

2012 ◽  
pp. 385-388 ◽  
Author(s):  
Azadeh Saadatmandi ◽  
Mohammad Elahi ◽  
Reza Farhoosh ◽  
Mahdi Karimi
Keyword(s):  
Sugar Beet ◽  
Water Absorption ◽  
Protein Content ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Ash Content ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Overall Acceptability ◽  
Tortilla Chips

The incorporation of sugar beet fiber (0–5%) to tortilla chips and the effects on the chemical and sensory properties were studied. Addition of sugar beet fiber (SBF) led to an increasing of water absorption capacity, ash content and darkness while lowering the protein content and oil absorption. Sensory evaluation showed that the overall acceptability of tortilla chips reduces if adding more than 2% SBF.

Physico-Chemical Characteristics of Sapota (Chikoo) Powder based Value Added Pasta Product using Semolina (Suji) and Maida

2020 ◽  
Vol 7 (04) ◽  
Author(s):  
SATYA NARAYAN SINGH ◽  
RAJESH G BURBADE ◽  
HITESH SANCHAVAT ◽  
P S PANDIT
Keyword(s):  
Bulk Density ◽  
Crude Protein ◽  
Water Solubility ◽  
Value Added ◽  
Absorption Capacity ◽  
Oil Absorption ◽  
Minimum Value ◽  
Maximum Value ◽  
Physico Chemical ◽  
Specific Length

The cereals of today are more nutritious and healthful than ever before. Cereals processing is one of the oldest and the most essential part of all food technologies. Pasta products and noodles have been staple foods since ancient times in many countries all over the world. In this study pasta formulation was substituted with blending sapota powder in different proportions (4 levels i.e. 0%, 10%, 20%, 30%) into semolina and maida flour separately. Pasta products were prepared using eight different formulations and adding water (approximately 31% of total weight) in DOLLY pasta extruder machine. All the samples were evaluated for physical properties: specific length (mm/g), bulk density (kg/m3), specific density (kg/m3) and porosity (%); functional properties: water absorption index (%), water solubility index (%) and oil absorption capacity (ml/g) and nutritional compositions: moisture (%), crude protein (%), fat (%) and carbohydrate (%). Highest specific length 36.20 mm/g was observed for T5 treatment, low bulk density 368.10 kg/m3 was observed for T5 and highest porosity 9.24% was found for T1 treatment. The maximum WAI, WSI values 325.83%, 17.33% respectively was observed for T1 treatment and minimum value of oil absorption capacity 1.06 ml/g for T8 treatment. The moisture content of dried pasta products was found in the range of 6 to 7%. The maximum value of crude protein 13.07% was found for T5 and minimum value 8.81% for T4 treatments. The fat contents were varied from 1.02% to 1.28 %. The maximum value of carbohydrate was 76.20% for T1 and minimum value 65.41% for T8.

scholarly journals Mathematical modeling of pequi pulp drying and effective diffusivity determination

2017 ◽  
Vol 21 (7) ◽  
pp. 493-498 ◽  
Author(s):  
Elisabete P. de Sousa ◽  
Rossana M. F. de Figueirêdo ◽  
Josivanda P. Gomes ◽  
Alexandre J. de M. Queiroz ◽  
Deise S. de Castro ◽  
...  
Keyword(s):  
Experimental Data ◽  
Effective Diffusivity ◽  
Drying Kinetics ◽  
Convective Drying ◽  
Drying Time ◽  
Air Speed ◽  
Drying Curves ◽  
Increasing Temperature ◽  
Kinetics Of ◽  
Best Fit

ABSTRACT The aim of this work was to study the drying kinetics of pequi pulp by convective drying at different conditions of temperature (50, 60, 70 and 80 °C) and thickness (0.5, 1.0 and 1.5 cm) at the air speed of 1.0 m s-1, with no addition of adjuvant. The experimental data of pequi pulp drying kinetics were used to plot drying curves and fitted to the models: Midilli, Page, Henderson & Pabis and Newton. Effective diffusivity was calculated using the Fick’s diffusion model for a flat plate. It was found that, with increasing thickness, the drying time increased and, with increasing temperature, the drying time was reduced. The Midilli model showed the best fit to the experimental data of pequi pulp drying at all temperatures and thicknesses, presenting higher coefficients of determination (R2), indicating that this model satisfactorily represents the pequi pulp drying phenomenon. There was a trend of increase in the effective diffusivity with the increase in pulp layer thickness and temperature.

scholarly journals Impacts of Cooking Times (Steaming and Cooking on Embers) on Some Physico-Functional Parameters of Yam (Dioscorea bulbifera) Flours Cv Dougon-won Consumed in Côte d'Ivoire

2019 ◽  
pp. 1-13
Author(s):  
Gbocho Serge Elvis Ekissi ◽  
Jacques Yapi Achy ◽  
Martin Tanoh Kouadio ◽  
Bedel Jean Fagbohoun ◽  
Lucien Patrice Kouamé
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Water Solubility ◽  
Foam Stability ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Functional Parameters ◽  
Swelling Power ◽  
Dioscorea Bulbifera ◽  
Cooking Times

Impacts of cooking times (steaming and cooking on embers) on some physico-functional parameters of yam (D. bulbifera) flours cv Dougou-won were determined during 10, 20 and 30 min. Results showed that steaming and cooking on embers increased significantly (P <0.05) the dispersibility (D), water absorption capacity (WAC), paste clarity (PC), water solubility index (WSI), swelling power (SP), least gelation capacity (LGC) and solubility (S) but decreased significantly (P <0.05) foam capacity (FC), wettability (W) and foam stability (FS) of flours (D. bulbifera) cv Dougou-won. Steaming increased significantly (P <0.05) oils absorption capacity (OAC) and bulk density (BD). However, cooking on embers decreased significantly (P <0.05) oils absorption capacity (OAC) but not affected significantly (P <0.05) bulk density (BD). The steaming time (30 min) is recommended to considerably influence the physico-functional parameters of the yam (D. bulbifera) flours cv Dougou-won.

scholarly journals Comparative nutritional and functional properties of selected underutilized legumes

2020 ◽  
Vol 45 (3) ◽  
Author(s):  
K. O. Soetan ◽  
A. A. Adeola
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Phaseolus Lunatus ◽  
International Institute ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Crude Fibre ◽  
Emulsion Capacity

Underutilized and neglected legumes have numerous nutritional potentials with great contributions to food security but they are usually excluded from research and development agenda. This study evaluates the nutritional and functional properties of six different underutilized and neglected legumes; Lima bean (LB) (Phaseolus lunatus) (2006-009), Bambara groundnut (BG) (Vigna subterranea) (TVSU- 1482), winged bean (WB) (Psophocarpus tetragonolobus) (Tpt-48), jack bean (JB) (Canavalia ensiformis) (Tce-4), sword bean (SB) (Canavalia gladiata) (Tcg-4) and African yam bean (AYB) (Sphenostylis stenocarpa) (TSS-95) from the Genetic Resources Unit (GRU), International Institute of Tropical Agriculture (IITA), Ibadan, Oyo State, Nigeria. Nutritional and functional properties were evaluated using proximate composition, mineral analyses and functional properties like bulk density, water absorption capacity, oil absorption capacity, emulsion capacity and dispersibility. All the procedures were carried out using standard protocols. Statistical analysis was done using descriptive statistics. Results of proximate analysis showed that crude protein ranged from18.88 0.15%(WB) to 26.60±0.14%(AYB), crude fat ranged from 1.84 0.02% (JB) to 6.39 0.03% (BG), crude fibre ranged from 3.70 ±0.00% (AYB) to 5.04 0.03% (SB), ash ranged from 3.10 ± 0.14% (AYB) to 4.66 0.02% (LB), nitrogen free extract ranged from 55.60 0.04% (SB) to 62.97 0.12% (WB), moisture content ranged from 5.75 0.48% (AYB) to 10.77 0.03% (JB), dry matter ranged from 89.23 0.03% (JB) to 94.25 ± 0.488% (AYB) and gross energy ranged from 4.39 0.003 kcal/g (SB) to 4.66 0.00 (BG). Mineral content results revealed that calcium varied from 0.14 0.000% (LB) to 0.23 0.0003% (AYB), phosphorus varied from 0.20 0.0001% (AYB) to 0.38 0.00% (BG), sodium varied from 0.12 0.00% (LB and WB) to 0.35 0.0006% (AYB), potassium varied from 0.69 0.00% (LB) to 1.12 0.00% (BG), magnesium varied from 0.15 0.0002% (AYB) to 0.27 0.000% (BG) and iron varied from 44.84 0.03 (mg/g) (WB) to 80.98 0.0007(mg/g) (AYB). Results of functional properties showed that bulk density ranged from 0.45±0.04 g/mL (WB) to 0.77±0.08 g/mL (SB), water absorption capacity ranged from 168.33±0.03 g/100g (LB) to 183.62±0.01 g/100g (SB), oil absorption capacity ranged from 146.54 ±0.02 g/100g (LB) to 161.55±0.02 g/100g (JB), emulsion capacity ranged from 79.67 ±0.02 g/100g (LB) to 89.46±0.02 g/100g (SB) and dispersibility ranged from81.0±1.41%(SB) to 86.5±0.71% (BG). The study concluded that all the underutilized legumes have varying nutritional and functional properties, which should be exploited for nutritional benefits and industrial applications, as a solution to the problem of food shortage, especially in the developing countries.

scholarly journals The Compositional and Functional Attributes of Commercial Flours from Tropical Fruits (Breadfruit and Banana)

Foods ◽  
2019 ◽  
Vol 8 (11) ◽  
pp. 586 ◽  
Author(s):  
Shiqi Huang ◽  
Mario M. Martinez ◽  
Benjamin M. Bohrer
Keyword(s):  
Bulk Density ◽  
Wheat Flour ◽  
Dry Matter ◽  
Pasting Properties ◽  
Processed Food ◽  
Tropical Fruit ◽  
Swelling Power ◽  
Functional Attributes ◽  
Banana Flour ◽  
Water Holding

The objective of this study was to compare the compositional and functional properties of tropical flour sources (two breadfruit flours (type A and type B) and a banana flour) with a more traditional flour source (wheat flour). Macro-nutrient composition, pH, water and oil holding capacity, bulk density, particle size, solubility, swelling power, pasting properties, and thermodynamics (gelatinization and retrogradation) were determined. All flours evaluated were similar in their composition with high levels of carbohydrates (greater than 82.52 g/100 g on a dry-matter basis), with most of the carbohydrate content comprised of starch (greater than 67.02 g/100 g). The tropical fruit flours had greater (p < 0.05) water holding capacity than wheat flour. Breadfruit flour B had the lowest (p < 0.05) bulk density, while banana flour had the greatest (p < 0.05) bulk density. The swelling power of the tropical flours was greater (p < 0.05) than the wheat flour. The viscosity of the tropical flours was higher than wheat flour but decreased significantly when temperature was held at 130 °C. These results indicated that the two breadfruit flours and banana flour have great potential for application in processed food products, and have similar compositional attributes to a more traditional flour.

Sign in / Sign up

Export Citation Format

Share Document